DSPIC33EV32GM002-E/SS - 16-bit 5V DSC 32KB Flash | Microchip
부품 번호: DSPIC33EV32GM002-E/SS ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $3.27 | $3.27 |
| 10 | $2.95 | $29.50 |
| 100 | $2.62 | $262.00 |
| 500 | $2.35 | $1,175.00 |
| 1,000 | $2.1 | $2,100.00 |
| 3,000 | $1.92 | $5,760.00 |
DSPIC33EV32GM002-E/SS 개요
A digital signal controller combines the computational throughput of a microcontroller with DSP capabilities such as single-cycle multiply-accumulate and hardware division, sitting in the product hierarchy between general-purpose MCUs (like PIC16/PIC18) and dedicated DSP processors. DSCs are the preferred choice for closed-loop control systems such as motor control, digital power conversion, and sensor signal conditioning.
Key differentiating features of this family include native 5V operation for improved noise immunity in harsh electrical environments, on-chip peripherals such as advanced PWM, SENT, LIN, and CAN communication interfaces, and integrated analog including high-speed ADC and op amps on larger family members. The Peripheral Pin Select (PPS) architecture allows flexible remapping of digital peripherals to physical pins, easing PCB layout and reducing board cost.
Technically, the dsPIC33EV core executes most instructions in a single cycle with a 16-bit modified Harvard architecture, dual 40-bit accumulators, and DSP instruction support. Four DMA channels offload data movement from the CPU, and seven to nine timers support precise event timing. Flash self-programming enables field firmware updates, and the VCAP pin requires an external low-ESR capacitor for the internal 2.5V core regulator.
Typical applications include automotive sensors and touch control units, BLDC/DC motor control with safety features, appliance power supplies, and industrial automation nodes exposed to electrical noise. The 5V rail simplifies direct interfacing with precision sensors without level shifting.
Design consideration: keep the VCAP capacitor close to the device with a low-ESR ceramic value as specified in the family data sheet DS70005144H, and connect all VDD/VSS pairs and AVDD/AVSS properly to maintain ADC accuracy.
This page synthesizes distributor pricing, same-family drop-in alternatives, FAQs, and practical design notes not found on a single manufacturer or distributor page.
드롭인 대체품: DSPIC33EV32GM002-E/SS — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: DSPIC33EV32GM002-E/SS (동일 폼 팩터 및 풋프린트) — 차이점: Package, Qualification, Operating Temperature, Communication Interfaces, Peripheral Pin Select.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
DSPIC33EV32GM002-I/SS
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$2.78 / 개
데이터시트 보기 →DSPIC33EV32GM002-H/SS
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
DSPIC33EV64GM002-E/SS
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$2.95 / 개
데이터시트 보기 →DSPIC33EV128GM002-E/SS
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$2.98 / 개
데이터시트 보기 →DSPIC33EV16GM002-E/SS
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
DSPIC33EV32GM102-E/SS
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$2.78 / 개
데이터시트 보기 →DSPIC33EV32GM002-E/SS 최대 정격 & 전기적 특성
| Core Architecture | 16-bit dsPIC DSC |
| Program Memory (Flash) | 32 KB (11K x 24) |
| RAM | 4 KB |
| 최대 클록 주파수 | 60 MHz |
| Core Performance | 70 MIPS class at 5V |
| Operating Voltage | 4.5 V to 5.5 V (5V family) |
| DMA Channels | 4 |
| Timers | 7 |
| Communication Interfaces | SENT, LIN, CAN, UART, SPI, I2C |
| PWM | Advanced motor-control PWM |
| 패키지 | 28-SSOP (5.30 mm width) |
| 동작 온도 | -40C to +125C (E grade) |
| Qualification | AEC-Q100 (automotive) |
| 실장 유형 | Surface Mount |
| Programming/Debug | ICSP via PGECx/PGEDx pairs |
| Peripherals | Peripheral Pin Select (PPS), on-chip regulator (VCAP) |
| Target Applications | Automotive, appliances, industrial motor control |
DSPIC33EV32GM002-E/SS 28-ssop (5.30 mm width) 핀 구성 가이드
DSPIC33EV32GM002-E/SS(28-ssop (5.30 mm width) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: DSPIC33EV32GM002-E/SS.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
DSPIC33EV32GM002-E/SS 적합 용도: 6 애플리케이션s: Automotive Sensors and Touch Control Units, BLDC and DC Motor Control, Appliance Power and Control Boards, Digital Power Conversion, Industrial Sensor Conditioning Nodes, Automotive Lighting and Actuator Control.
Automotive Sensors and Touch Control Units
Microchip positions the dsPIC33EV family specifically for automotive sensor nodes and touch control units exposed to noise and vibration. The DSPIC33EV32GM002-E/SS fits this role because its native 4.5V to 5.5V operation provides superior noise margin on vehicle 5V sensor rails, its SENT peripheral directly interfaces with SENT-protocol sensors without external decoding hardware, and its -40C to +125C AEC-Q100 qualification covers under-dash and engine-bay-adjacent environments. The 32KB Flash accommodates sensor linearization tables and CAN/LIN stack firmware. Design teams typically run the CAN interface for ECU communication while remapping UART pins via Peripheral Pin Select to serve LIN, achieving two vehicle buses from one 28-pin controller.
추천
BLDC and DC Motor Control
The dsPIC33EV32GM002-E/SS is well suited to brushless-DC and DC motor control because its advanced motor-control PWM peripheral generates complementary outputs with dead-time insertion and fault shutdown, while the 16-bit DSP core executes current-loop PID and field-oriented-control arithmetic in the 60 MHz / 70 MIPS class budget. The four DMA channels stream ADC current-sense samples into RAM without CPU intervention, keeping control-loop jitter low. In a typical 5V gate-drive design, the DSC reads a shunt or hall sensor through the ADC, runs the control loop at 10 to 20 kHz, and outputs six PWM channels; 5V logic also directly drives many MOSFET gate drivers, removing level-shifter stages and improving switching-noise immunity in the power stage.
추천
Appliance Power and Control Boards
Home appliances such as washing machines, air conditioners and induction cooktops demand controllers that survive noisy motor and switching environments on a 5V supply. The DSPIC33EV32GM002-E/SS addresses this with its 5V-robust core, watchdog and brown-out supervision, and 32KB Flash for state machines plus touch or encoder interfaces. The 28-SSOP package saves board area on compact appliance PCBs, while the extended -40C to +125C rating tolerates hot enclosures near motors. Designers use the PWM peripheral for inverter or heater control, the ADC with DMA for current monitoring, and UART or LIN for user-interface boards; the on-chip self-programming Flash supports field firmware updates during appliance service.
추천
Digital Power Conversion
In digital power supplies, PFC stages and DC-DC converters, the dsPIC33EV32GM002-E/SS implements voltage- and current-mode control loops in firmware. The 60 MHz DSP core with dual 40-bit accumulators computes compensator equations fast enough for 100 to 500 kHz switching frequencies at practical loop rates, and the high-speed ADC captures input and output sense signals synchronously with the PWM period. Native 5V operation simplifies interfacing with the power stage's 5V analog and protection circuits and provides better noise immunity against switching transients than 3.3V controllers. The 32KB Flash stores multiple control profiles, and the external VCAP-regulated core keeps supply design to a single 5V rail.
추천
Industrial Sensor Conditioning Nodes
Industrial 4-20 mA loops, proximity sensors and encoder interfaces benefit from the dsPIC33EV32GM002-E/SS's 5V I/O that connects directly to precision sensors without level translation. The DSP core performs filtering, linearization and FFT-based diagnostics locally, while the remappable peripheral pins (PPS) let one PCB layout serve multiple sensor variants by reassigning UART, SPI or PWM functions in firmware. The 28-SSOP device's four DMA channels move ADC samples at fixed-rate, deterministic intervals suitable for control and logging, and the 32KB Flash retains calibration tables. With the -E grade rated to +125C, the node can reside in panels near drives and heating elements without local cooling.
추천
Automotive Lighting and Actuator Control
LED headlamp modules, pump drivers and flap actuators in vehicles need compact controllers with robust PWM generation and network connectivity. The dsPIC33EV32GM002-E/SS provides advanced PWM outputs with precise duty resolution for LED current regulation and dimming, SENT and LIN peripherals for communicating diagnostic data to body ECUs, and AEC-Q100 qualification at up to +125C for lamp-housing environments. The 5V core withstands load-dump-induced supply noise better than 3.3V alternatives, and its four DMA channels handle fault-sampling in the background. Firmware-based protection (overcurrent, overtemperature via ADC) replaces discrete protection ICs, and 32KB Flash supports multi-variant lamp calibrations on one PCB.
추천
추천 제품 요약
엔지니어링 참조 데이터: DSPIC33EV32GM002-E/SS — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | DSPIC33EV32GM002-I/SS | DSPIC33EV64GM002-E/SS | DSPIC33EV128GM002-E/SS | DSPIC33EV32GM102-E/SS |
|---|---|---|---|---|---|
| Package | 28-SSOP (5.30 mm) | 28-SSOP - same | 28-SSOP - same | 28-SSOP - same | 28-SSOP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Program Memory | 32 KB (11K x 24) | 32 KB | 64 KB | 128 KB | 32 KB |
| RAM | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB |
| Max Clock Frequency | 60 MHz | 60 MHz | 60 MHz | 60 MHz | 60 MHz |
| Operating Temperature | -40C to +125C (E grade) | -40C to +85C (I grade) | -40C to +125C (E grade) | -40C to +125C (E grade) | -40C to +125C (E grade) |
| AEC-Q100 Qualification | Yes (automotive) | Industrial grade - check ordering info | Yes (automotive) | Yes (automotive) | Yes (automotive) |
주요 차별점
- Extended -40C to +125C automotive rating (vs DSPIC33EV32GM002-I/SS)
- Cost-optimized 32KB Flash for entry-level designs (vs DSPIC33EV64GM002-E/SS)
- Native 5V operation with SENT/LIN/CAN integration (vs 3.3V 16-bit DSC families)
설계 노트
The dsPIC33EV32GM002 integrates a 2.5V core regulator accessed via the VCAP pin. Place a low-ESR ceramic capacitor on VCAP as close to the pin as possible, per the recommended value in the family data sheet DS70005144H. Do not connect any external voltage source to VCAP, and do not load it. Supply the device from a clean 4.5V to 5.5V rail; connect all VDD/VSS pairs with local 0.1uF decoupling plus one bulk capacitor per board. Separately decouple AVDD for ADC accuracy.
ICSP programming uses PGECx/PGEDx pairs - route your chosen pair (e.g. PGEC2/PGED2) together as a matched pair to the programming header, since the debugger requires both from the same pair (per Microchip family documentation). Keep the crystal loop compact around OSC1/OSC2 with local ground guard. Because Peripheral Pin Select lets you remap digital functions, reserve test points on at least one UART pair for debug flexibility before finalizing the layout.
Common pitfalls: (1) forgetting the VCAP capacitor - the device will not start reliably; (2) mixing PGEC1 with PGED2 during debugging - pairs must match; (3) relying on the -E grade beyond +125C - use the -H grade (up to +150C) for under-hood locations; (4) assuming all 32KB Flash is available for code - reserve a boot block if you plan self-programming field updates; (5) exceeding the 4.5V to 5.5V operating window during load-dump transients in automotive systems - add TVS protection on the supply rail.
In 5V automotive and motor-control environments, keep high-current PWM loops away from the ADC sense routing and use the differential or railed reference configuration with AVDD/AVSS as reference for best accuracy. When sensing motor currents via shunts, sample synchronously with the PWM center (center-aligned trigger) so switching noise is minimized; the dsPIC33EV ADC supports PWM-triggered conversions, and using DMA for the sample transfer eliminates CPU-timing jitter in the control loop.
규정 준수 정보
Automotive, AEC-Q100 qualification stated in verified web data (Hotenda product listing). RoHS/lead-free status per standard Microchip 28-SSOP commercial product offerings; confirm on the Microchip product page for certificate copies.
