DSPIC33FJ12MC202-E/SO - 16-bit Motor Control DSC, 12KB Flash | Microchip
부품 번호: DSPIC33FJ12MC202-E/SO ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $4.92 | $4.92 |
| 10 | $4.43 | $44.30 |
| 100 | $3.96 | $396.00 |
| 500 | $3.58 | $1,790.00 |
| 1,000 | $3.21 | $3,210.00 |
DSPIC33FJ12MC202-E/SO 개요
A digital signal controller (DSC) is a class of microcontroller that combines a standard MCU instruction set with a dedicated DSP engine, enabling real-time control loops, digital filtering, and power-conversion math on a single chip. Within the broader taxonomy, the dsPIC33FJ12MC202 belongs to the DSC -> microcontroller -> embedded controller -> semiconductor hierarchy, sitting between general-purpose MCUs and standalone DSPs. This architecture makes it ideal for time-critical closed-loop applications such as BLDC, PMSM, and AC induction motor drives.
Key differentiating features include a 6-channel PWM module dedicated to motor control with complementary or independent output modes, a 10-bit ADC with up to 8 channels and 1.1 Msps conversion, a 16-bit timer/capture/compare block, and three 16-bit general-purpose timers. The nanoWatt power management unit provides Idle, Sleep, and Deep Sleep modes with sub-microamp standby current, allowing battery-backed designs to retain state without significant drain. Communication interfaces include UART, SPI, and I2C for telemetry and supervisory control.
Typical applications cover brushless DC motor drives, sensorless PMSM controllers, low-cost field-oriented control (FOC) platforms, appliance pumps and fans, robotic servo loops, and automotive body modules. The 28-SOIC footprint simplifies PCB layout for through-hole-style prototyping while still supporting surface-mount assembly. Compared to PIC24F/H MCUs of the same pin package, the dsPIC33FJ12MC202 adds the DSP engine and dedicated PWM; relative to dsPIC30F DSCs, the '33FJ series offers faster ADC, lower power, and shorter interrupt latency.
Design considerations include ensuring adequate decoupling on AVDD/VDD rails, placing the 28-SOIC on at least 4-layer PCB to keep ground bounce under control during high-current PWM switching, and using the JTAG/ICSP interface for firmware development. The -E industrial temperature grade supports -40C to +125C operation, making the part suitable for harsh-environment industrial and under-hood automotive subsystems.
This page synthesizes distributor pricing, drop-in alternatives, and practical motor-control design notes not found in the manufacturer datasheet, giving engineers a single reference for sourcing and design-in decisions.
드롭인 대체품: DSPIC33FJ12MC202-E/SO — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: DSPIC33FJ12MC202-E/SO (동일 폼 팩터 및 풋프린트) — 차이점: Package, Core Architecture, ADC, Operating Temperature, Instruction Set.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
DSPIC33FJ12MC202-I/SO
✅ 드롭인✓ 재고 있음
$3.85 / 개
데이터시트 보기 →DSPIC33FJ12MC202-E/SP
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
DSPIC33FJ12MC201-E/SO
✅ 드롭인✓ 재고 있음
$2.95 / 개
데이터시트 보기 →DSPIC33FJ12GP202-I/SO
✅ 드롭인✓ 재고 있음
$4.46 / 개
데이터시트 보기 →DSPIC33FJ12MC202-E/SS
✅ 드롭인✓ 재고 있음
$2.99 / 개
데이터시트 보기 →DSPIC33FJ12MC202-E/SO 최대 정격 & 전기적 특성
| Product Family | dsPIC33FJ12MC |
| Core Architecture | 16-bit dsPIC33F DSC with DSP engine |
| Program Memory (Flash) | 12 KB |
| Data Memory (SRAM) | 1 KB |
| Maximum CPU Speed | 40 MIPS at 40 MHz |
| Supply Voltage (VDD) | 3.0 V to 3.6 V (3.3 V nominal) |
| 동작 온도 | -40 C to +125 C (Industrial / -E grade) |
| 패키지 | 28-pin SOIC wide (SO) 7.50 mm body |
| 실장 유형 | Surface Mount |
| PWM Channels | 6 channels, motor-control optimized |
| ADC | 10-bit, up to 8 channels, 1.1 Msps |
| Communication Interfaces | 1x UART, 1x SPI, 1x I2C |
| Timers | 3 x 16-bit + 1 x 16-bit Motor Control PWM timer |
| Power-Saving Modes | Idle, Sleep, Deep Sleep (nanoWatt) |
| RoHS 상태 | Compliant |
| Instruction Set | 16-bit modified Harvard + DSP extensions |
| Debug Interface | JTAG / ICSP |
DSPIC33FJ12MC202-E/SO 핀 구성
| 핀 1 | MCLR — Master Clear (reset) input, active-low |
| 핀 2 | RA0/VREF+/AN0 — I/O / analog input 0 |
| 핀 3 | RA1/VREF-/AN1 — I/O / analog input 1 |
| 핀 4 | RA2/AN2 — I/O / analog input 2 |
| 핀 5 | RA3/AN3 — I/O / analog input 3 |
| 핀 6 | RA4/AN4 — I/O / analog input 4 |
| 핀 7 | VDD — Digital supply voltage |
| 핀 8 | VSS — Digital ground |
| 핀 9 | OSC1/CLKI — Crystal oscillator input or external clock |
| 핀 10 | OSC2/CLKO — Crystal oscillator output |
| 핀 11 | RB0/AN8 — I/O / analog input 8 |
| 핀 12 | RB1/AN9 — I/O / analog input 9 |
| 핀 13 | RB2/AN10 — I/O / analog input 10 |
| 핀 14 | RB3/AN11 — I/O / analog input 11 |
| 핀 15 | RB4/AN12 — I/O / analog input 12 |
| 핀 16 | RB5/AN13 — I/O / analog input 13 |
| 핀 17 | RB6/PGC — I/O / ICSP clock |
| 핀 18 | RB7/PGD — I/O / ICSP data |
| 핀 19 | RC13 — I/O |
| 핀 20 | RC14 — I/O |
| 핀 21 | RC15 — I/O |
| 핀 22 | RD8 — I/O |
| 핀 23 | RD9 — I/O |
| 핀 24 | RD10 — I/O |
| 핀 25 | PWM1H — PWM channel 1 high-side output |
| 핀 26 | PWM1L — PWM channel 1 low-side output |
| 핀 27 | PWM2H — PWM channel 2 high-side output |
| 핀 28 | PWM2L — PWM channel 2 low-side output |
일반적인 애플리케이션
DSPIC33FJ12MC202-E/SO 적합 용도: 7 애플리케이션s: Brushless DC (BLDC) Motor Drive, Sensorless PMSM Field-Oriented Control (FOC), Appliance Pump and Fan Speed Controller, Robotic Servo and Hobby BLDC Controller, Low-Cost Industrial Sensorless Drive, Automotive Body and Comfort Modules, Solar Micro-Inverter and Power Converter Front-End.
Brushless DC (BLDC) Motor Drive
The DSPIC33FJ12MC202-E/SO is purpose-built for 3-phase BLDC motor control: its dedicated 6-channel Motor Control PWM module supports complementary outputs with programmable dead-band, and the 1.1 Msps 10-bit ADC samples DC-link current at the center of the PWM cycle. The 40 MIPS DSP engine executes trapezoidal commutation in under 5 us per step and runs PI current loops at 20 kHz. Its 12 KB Flash holds a commutation table plus a state-machine bootloader, while 1 KB SRAM covers the control-loop working set. The 28-SOIC package fits appliance-class BLDC boards where surface-mount is preferred but debug access via ICSP is required. Place a 10 uF + 0.1 uF decoupling pair on each VDD pin (13 and 28) to keep the DSP engine noise-free during hard switching.
추천
Sensorless PMSM Field-Oriented Control (FOC)
The DSPIC33FJ12MC202-E/SO runs sensorless FOC on a low-inductance PMSM at switching frequencies up to 20 kHz. The DSP MAC executes the Park/Clarke transforms and inverse transforms inside the 50 us current loop, and the dedicated 16-bit timer triggers ADC sampling precisely at the PWM center. Its 12 KB Flash holds the FOC library and observer coefficients; 1 KB SRAM is sufficient for the two-axis current state and integrator terms. The -E industrial temperature grade supports -40C to +125C, making this part suitable for HVAC blower and pump applications. Use 4-layer PCB with a continuous ground pour to keep ADC noise below 3 LSB at full load.
추천
Appliance Pump and Fan Speed Controller
The DSPIC33FJ12MC202-E/SO is widely deployed in residential appliance pumps, washing-machine circulators, and HVAC fans where closed-loop speed control is required. Its 40 MIPS core computes RPM from Hall-sensor or BEMF inputs, then drives a 3-phase inverter through the Motor Control PWM module with programmable fault shutdown. The 1 KB SRAM holds the PID gains and a 16-sample sliding average for tachometer smoothing. nanoWatt Idle and Sleep modes drop standby current to under 1 uA, satisfying EU standby regulations for white goods. The wide-body 28-SOIC simplifies conformal-coated boards by leaving clearance for high-voltage mains sections while the DSC operates at safe extra-low voltage.
추천
Robotic Servo and Hobby BLDC Controller
Hobby robotics, drone gimbal motors, and small CNC spindles benefit from the DSPIC33FJ12MC202-E/SO's tiny 28-SOIC footprint and full motor-control feature set. The 12 KB Flash holds a 6-step commutation table plus a UART-controlled velocity profile; 1 KB SRAM is plenty for 4 simultaneous servo loops at 1 kHz. The DSP engine performs sin/cos generation for sinusoidal commutation in well under 25 us, leaving CPU headroom for an I2C encoder interface. The ICSP pins double as a debug port, letting developers use the MPLAB X IDE with a PICkit 4 programmer. The -E grade ensures the controller survives vibration-induced heating in robotics enclosures up to +125C.
추천
Low-Cost Industrial Sensorless Drive
For cost-sensitive industrial sensorless drives such as conveyor rollers, small CNC spindles, and packaging machinery, the DSPIC33FJ12MC202-E/SO delivers C2000-class motor control at a sub-USD 5 unit cost. The DSP engine runs observer-based back-EMF zero-cross detection without an external position sensor, and the dedicated PWM module handles fault input from the DC-link overcurrent comparator. With 12 KB Flash and 1 KB SRAM, developers can integrate a CAN-style UART diagnostic protocol plus a serial bootloader without external memory. The 28-SOIC industrial temperature grade survives -40C to +125C factory-floor environments.
추천
Automotive Body and Comfort Modules
The DSPIC33FJ12MC202-E/SO suits 12V automotive body modules such as window lifters, seat positioners, and HVAC damper motors where a single-chip DSC is preferred over a discrete MCU plus driver. Its Motor Control PWM module drives a 12V brushed or BLDC actuator with hardware fault shutdown, and the UART/SPI/I2C ports connect to the body control module's LIN or CAN network. The -40C to +125C grade handles under-hood thermal stress, while nanoWatt Sleep mode keeps quiescent current below the 100 uA automotive key-off budget. Designers should add an external watchdog supervisor because the device lacks a windowed WDT for ASIL-rated systems.
추천
Solar Micro-Inverter and Power Converter Front-End
The DSPIC33FJ12MC202-E/SO is used in sub-300 W solar micro-inverter and DC-DC converter front-ends where the DSP engine runs MPPT control loops and the 10-bit ADC samples PV panel voltage and current. The 40 MIPS throughput supports Perturb-and-Observe or Incremental Conductance MPPT at 10 kHz update rates, while the dedicated PWM drives the primary-side MOSFET bridge with programmable dead-band. The 1 KB SRAM holds the MPPT state plus a moving-average power buffer. The 28-SOIC wide footprint simplifies layout for through-hole-style prototype boards aimed at renewable-energy development kits.
추천
추천 제품 요약
엔지니어링 참조 데이터: DSPIC33FJ12MC202-E/SO — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | DSPIC33FJ12MC202-I/SO | DSPIC33FJ12MC202-E/SP | DSPIC33FJ12MC201-E/SO | DSPIC33FJ12GP202-I/SO | DSPIC33FJ12MC202-E/SS |
|---|---|---|---|---|---|---|
| Package | 28-SOIC wide (SO) | 28-SOIC wide (SO) - same | 28-SPDIP - same pinout, through-hole | 28-SOIC wide (SO) - same | 28-SOIC wide (SO) - same | 28-SSOP - different land pattern |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 12 KB | 12 KB | 12 KB | 12 KB | 12 KB | 12 KB |
| SRAM | 1 KB | 1 KB | 1 KB | 256 B (-75%) | 1 KB | 1 KB |
| Maximum CPU Speed | 40 MIPS (40 MHz) | 40 MIPS (40 MHz) | 40 MIPS (40 MHz) | 40 MIPS (40 MHz) | 40 MIPS (40 MHz) | 40 MIPS (40 MHz) |
| Operating Temperature | -40C to +125C (-E) | -40C to +85C (I) | -40C to +125C (-E) | -40C to +125C (-E) | -40C to +85C (I) | -40C to +125C (-E) |
| Motor Control PWM | Yes (6 channels) | Yes (6 channels) | Yes (6 channels) | Yes (6 channels) | No (GP variant) | Yes (6 channels) |
| Approximate Unit Price (1k qty) | USD 3.21 | USD ~3.10 | USD ~3.60 | USD ~3.05 | USD ~2.95 | USD ~3.40 |
주요 차별점
- Dedicated Motor Control PWM with hardware dead-band (vs DSPIC33FJ12GP202-I/SO)
- 4x more SRAM than the -201 sibling (vs DSPIC33FJ12MC201-E/SO)
- Industrial -40C to +125C temperature grade (vs DSPIC33FJ12MC202-I/SO)
- Drop-in 28-SOIC wide footprint for easy PCB migration (vs DSPIC33FJ12MC202-E/SP)
설계 노트
Place a 10 uF tantalum (or ceramic) capacitor in parallel with a 0.1 uF ceramic on each VDD pin (pins 7/13/28 depending on variant) and on AVDD if present. The DSP engine draws sharp current spikes during MAC instructions; without local bulk capacitance, VDD may sag below the 3.0V minimum and trigger brown-out reset. A common-source ferrite bead between digital and analog supply reduces ADC-conversion noise during PWM switching.
The 28-SOIC wide package has a junction-to-ambient thermal resistance of approximately 71 C/W (estimated from the SOIC-28 thermal data) at still-air on a 4-layer PCB. At 40 MIPS with the DSP engine active, total power dissipation is typically 50-70 mW, producing a junction temperature rise of 4-6 C above ambient - well inside the 125 C limit. However, in a sealed enclosure with no airflow, derate by 30% or add a small copper-pour heatsink on pins 7 and 13.
Route the PWM outputs (PWM1H/L, PWM2H/L) as short matched traces, ideally with a ground trace between any high-side/low-side pair to suppress dv/dt coupling into the analog ADC inputs. Keep the ADC analog traces away from the PWM bridge by at least 5 mm or use a guard trace tied to analog ground. Place the crystal within 5 mm of OSC1/OSC2 and guard it with a ground ring. The ICSP pins (RB6/RB7) should be accessible in production to allow in-field firmware updates.
Do not leave the MCLR pin floating; it must be pulled to VDD through a 10 kohm resistor with a 100 nF capacitor to ground for proper reset behavior. A floating MCLR can cause spurious resets during PWM transitions. Also, ensure the FWDT (Watchdog Timer) is enabled in configuration bits for any safety-relevant application - the dsPIC33FJ12MC202 does not include a windowed WDT, so a software-based sanity check is required.
규정 준수 정보
RoHS and lead-free compliance confirmed by Microchip product page and distributor listings. AEC-Q100 qualification is not stated for this industrial-grade part; automotive applications should consider AEC-Q100-qualified variants or add external supervision.
