DSPIC33FJ64GP804T-I/PT - 16-bit DSC 40 MIPS 64KB Flash | Microchip
부품 번호: DSPIC33FJ64GP804T-I/PT ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $6.5 | $6.50 |
| 10 | $5.78 | $57.80 |
| 100 | $5.2 | $520.00 |
| 500 | $4.85 | $2,425.00 |
| 1,000 | $4.5 | $4,500.00 |
DSPIC33FJ64GP804T-I/PT 개요
A Digital Signal Controller combines the peripheral set and ease of use of a microcontroller with the computational throughput of a digital signal processor. In the power-management IC hierarchy, the DSC sits above a plain MCU because it adds DSP-class multiply-accumulate instructions, hardware fractional arithmetic, and high-speed ADC sampling, while retaining Flash self-programming, interrupts, and familiar development tools such as MPLAB X and the Explorer 16/32 Development Board.
Key features of this device include the 40 MIPS dsPIC33F core executing an enhanced 16-bit instruction set with DSP extensions, 64 KB of self-programmable Flash, integrated DMA for data movement without CPU intervention, and multiple serial communications engines suited to motor control, digital power, and audio signal chains. The 21 I/O ports provide flexible peripheral mapping across the 44-pin footprint.
From an architecture standpoint, the dsPIC33FJ64GP804 belongs to Microchip's GP (general purpose) family of dsPIC33FJ devices, which pairs the 16-bit CPU with advanced analog peripherals and supports the PIC24F, dsPIC, and PIC32 tool ecosystem. Software libraries, code examples, and Plug-In Modules (PIMs) are shared across the family, reducing development risk when scaling Flash density within the same pinout.
Typical applications include digital power supplies and power factor correction, sensorless motor control drives, industrial automation nodes, and embedded audio or communications processing where 40 MIPS of DSP throughput at 3.3V is sufficient.
When designing with this DSC, budget the 3.0V-3.6V rail carefully and place 0.1uF decoupling capacitors at every VDD/VSS pair; the tape-and-reel (1200 units) packing suits automated SMT assembly lines.
This page synthesizes distributor pricing, same-brand drop-in alternatives within the dsPIC33FJ 44-pin TQFP family, and practical design notes not consolidated in the manufacturer datasheet.
드롭인 대체품: DSPIC33FJ64GP804T-I/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: DSPIC33FJ64GP804T-I/PT (동일 폼 팩터 및 풋프린트) — 차이점: Core Architecture, Operating Temperature, Package, RoHS Status, Supply Voltage.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
DSPIC33FJ64GP204T-I/PT
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$4.1 / 개
데이터시트 보기 →DSPIC33FJ128GP804T-I/PT
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
DSPIC33FJ32GP204-I/PT
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$3.78 / 개
데이터시트 보기 →DSPIC33FJ32MC304-E/PT
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$4.45 / 개
데이터시트 보기 →DSPIC33FJ64GP804T-E/PT
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
DSPIC33FJ64GP804T-I/PT 최대 정격 & 전기적 특성
| Core Architecture | 16-bit dsPIC33F DSC |
| Maximum Clock / Performance | 40 MIPS |
| Program Memory Type | Flash |
| Flash Program Memory | 64 KB |
| Supply Voltage Range | 3 V to 3.6 V |
| DMA Controller | Yes |
| I/O Ports | 21 |
| 핀 수 | 44 |
| 패키지 | 44-pin TQFP (PT), 10 x 10 mm |
| 동작 온도 범위 | -40C to +85C |
| 실장 유형 | Surface Mount |
| Packing Media | Tape and Reel (1200 units) |
| Life Cycle Stage | Active |
| Lead Finish | Lead free |
| Country of Origin | Philippines, Thailand |
DSPIC33FJ64GP804T-I/PT 44-pin tqfp (pt), 10 x 10 mm 핀 구성 가이드
DSPIC33FJ64GP804T-I/PT(44-pin tqfp (pt), 10 x 10 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: DSPIC33FJ64GP804T-I/PT.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
DSPIC33FJ64GP804T-I/PT 적합 용도: 6 애플리케이션s: Digital Power Supplies, Motor Control Drives, Industrial Automation Nodes, Embedded Audio Processing, Test and Measurement Instruments, Consumer and IoT Edge Devices.
Digital Power Supplies
Digital power supplies and power factor correction stages benefit directly from the DSPIC33FJ64GP804T-I/PT's 40 MIPS DSP core and on-chip DMA. The controller can execute current-loop compensation at hundreds of kilohertz while DMA streams ADC samples into RAM without CPU intervention, keeping loop latency deterministic. In a typical topology the DSC reads output voltage and inductor current through its analog front end, computes the control law with fractional DSP instructions, and drives PWM outputs; unlike analog-only controllers, compensation coefficients can be updated in firmware. Flash self-programming allows field updates of control firmware in the same 3.0-3.6 V rail as the gate-driver logic.
추천
Motor Control Drives
Sensorless BLDC and PMSM motor drives are a core use case for the DSPIC33FJ64GP804T-I/PT. The 40 MIPS core executes field-oriented control math with single-cycle multiply-accumulate instructions, while the DMA offloads ADC sampling of phase currents and the DC bus. The 21 I/O ports give enough pins for a three-phase inverter gate interface, encoder or hall inputs, and a communications link, all within the 44-pin TQFP footprint. Running from a 3.3 V rail at -40C to +85C suits industrial drive environments; the same PCB can host the pin-compatible DSPIC33FJ32MC304-E/PT if a motor-control-peripheral-optimized variant becomes preferable.
추천
Industrial Automation Nodes
Industrial automation nodes - sensors, actuators, and fieldbus endpoints - use the DSPIC33FJ64GP804T-I/PT where 64 KB of Flash is sufficient for protocol stacks plus application logic. The industrial -40C to +85C rating matches cabinet and machine-mounted electronics, and the 3.0-3.6 V supply integrates cleanly with 3.3 V logic rails. The DMA controller keeps UART/SPI data transfers running during control loops, and the 44-pin TQFP's 21 I/O lines accommodate digital I/O expansion. The tape-and-reel packing (1200 units) supports volume SMT production, and the active lifecycle status protects long-term availability for factory equipment service lives.
추천
Embedded Audio Processing
Embedded audio products use the DSPIC33FJ64GP804T-I/PT for codec control, audio effect processing, and signal routing where a full DSP is oversized. The 40 MIPS DSP core handles FIR/IIR filtering and mixing at audio sample rates with margin, while DMA moves sample buffers between the serial audio interface and RAM. The GP family's serial peripherals connect to external audio codecs over I2C/SPI for volume, EQ, and route control. Because the family is pin-compatible across 32/64/128 KB Flash variants in the same 44-pin TQFP, product tiers can share one PCB, upgrading to DSPIC33FJ128GP804T-I/PT only for feature-rich SKUs.
추천
Test and Measurement Instruments
Bench and portable test instruments use the DSPIC33FJ64GP804T-I/PT as a control and signal-processing engine. The 40 MIPS core and DSP instruction set implement waveform averaging, triggering logic, and calibration math, while DMA services the ADC sampling stream to keep measurement timing jitter low. The 44-pin TQFP with 21 I/O ports drives front-panel buttons, displays, and relay attenuators, and the -40C to +85C industrial rating covers unconditioned environments. Its 3.0-3.6 V supply simplifies power-tree design alongside 3.3 V display and interface ICs, and the active lifecycle and Microchip tool ecosystem (MPLAB X, Explorer 16/32) speed firmware development.
추천
Consumer and IoT Edge Devices
Consumer appliances and IoT edge nodes adopt the DSPIC33FJ64GP804T-I/PT when sensor signal processing exceeds plain-MCU capability but unit cost must stay low. At roughly $5.78 per unit (as of 2026-09-27, LCSC), the device delivers 40 MIPS DSP throughput, DMA, and 64 KB Flash in a compact 10 x 10 mm TQFP. Typical roles include power-metering front ends, appliance motor feedback, and acoustic sensor processing. The 3.0-3.6 V rail and low pin-count footprint suit dense consumer PCBs; volume production benefits from the 1200-unit tape-and-reel, and the pin-compatible family allows Flash-tiering across product variants without layout changes.
추천
추천 제품 요약
엔지니어링 참조 데이터: DSPIC33FJ64GP804T-I/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | DSPIC33FJ64GP204T-I/PT | DSPIC33FJ128GP804T-I/PT | DSPIC33FJ32GP204-I/PT | DSPIC33FJ32MC304-E/PT | DSPIC33FJ64GP804T-E/PT |
|---|---|---|---|---|---|---|
| Package | 44-TQFP (PT), 10x10 mm | 44-TQFP (PT) - same | 44-TQFP (PT) - same | 44-TQFP (PT) - same | 44-TQFP (PT) - same | 44-TQFP (PT) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Program Memory | 64 KB | 64 KB | 128 KB | 32 KB | 32 KB | 64 KB |
| Core Performance | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS |
| Supply Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Operating Temperature | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) | Extended (E) range | Extended (E) range |
| Peripheral Family | GP (general purpose) | GP | GP | GP | MC (motor control) | GP |
주요 차별점
- Flash upgrade path without redesign (vs DSPIC33FJ128GP804T-I/PT)
- Full GP peripheral richness at 44 pins (vs DSPIC33FJ64GP204T-I/PT)
- Broader application coverage than MC-family parts (vs DSPIC33FJ32MC304-E/PT)
설계 노트
The DSPIC33FJ64GP804T-I/PT requires a tightly regulated 3.0 V to 3.6 V rail. Place a low-ESR 0.1uF ceramic capacitor at every VDD/VSS pair of the 44-pin TQFP, plus a bulk 10uF capacitor near the device. If the board is powered from 5 V or 24 V, use an LDO or buck converter with adequate transient response - DSC core current steps occur during Flash programming and DMA bursts. Verify the regulator stays within 3.6 V under all load transients, since exceeding the absolute maximum on VDD can permanently damage the device.
For the 10 x 10 mm TQFP-44, keep the analog and digital grounds as a single plane but partition component placement: route the analog front-end traces (ADC inputs) away from PWM and switching-node traces to prevent noise coupling into measurements. Use short, direct traces for the programming/debug connector (MCLR, PGD, PGC) and add a series resistor on MCLR for ICSP robustness. Decouple the VDD core pins before routing anything else - this ordering saves rework during EMC testing of digital power or motor-drive applications.
Do not assume pin-for-pin identity when substituting across the dsPIC33FJ 44-pin family: while the TQFP-44 footprint is shared, peripheral mapping (ADC channel assignments, remappable pin functions) differs between the GP204, GP804, and MC304 groups. Recompile firmware with the correct device header and re-verify the pinout against the family datasheet before layout reuse. Also note the T suffix denotes tape-and-reel packing (1200 units) - ordering the non-T MPN for prototypes avoids excess reel inventory.
규정 준수 정보
Microchipdirect lists the package as lead free; the digchip listing confirms a lead-free plastic TQFP-44. Full RoHS/REACH certificates are available via Microchip's Material Compliance portal referenced on the product page.
