EFM32LG232F64-QFP64 - 48MHz Cortex-M3 64KB MCU | Silicon Labs
부품 번호: EFM32LG232F64-QFP64 ✓ 활성EFM32LG232F64-QFP64 개요
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface circuitry into one device. The EFM32LG belongs to the Leopard Gecko family, a 32-bit ARM Cortex-M3 platform designed for low-power, battery-operated products. Its hierarchy places it among embedded microcontrollers, embedded processors, and energy-conscious embedded semiconductor solutions.
The EFM32LG232F64-QFP64 provides 64 KB of Flash memory for firmware and 32 KB of RAM for working data. Its 48 MHz Cortex-M3 core supports general control, monitoring, communications, and signal-processing tasks. The device is specified for operation from 1.98 V to 3.8 V, allowing integration with common low-voltage embedded power rails.
Silicon Labs emphasizes low power consumption in the Leopard Gecko family. The EFM32LG data sheet specifies current consumption as low as 0.65 µA in Stop mode and 211 µA/MHz in Run mode. These figures make the MCU suitable for systems where standby current, duty-cycle behavior, and energy efficiency determine the operating-life target. AES support provides hardware-assisted cryptographic operation for designs requiring data protection.
Typical applications include battery-powered sensor nodes, compact industrial controllers, wearable and health-monitoring devices, connected embedded equipment, and low-power consumer products. The 64-pin TQFP package provides a conventional surface-mount footprint with accessible leads for assembly and inspection.
When designing around the EFM32LG232F64-QFP64, use the manufacturer pin-description tables and EFM32LG reference documentation to assign every signal, including power, ground, reset, debug, analog, and communication functions. Confirm the board voltage range and peripheral requirements against the device configuration before releasing firmware.
This product page combines manufacturer documentation, distributor technical summaries, lifecycle-oriented sourcing guidance, and practical design notes. It also distinguishes confirmed same-package alternatives from options that require engineering review, helping teams assess PCB reuse, firmware compatibility, and supply continuity.
드롭인 대체품: EFM32LG232F64-QFP64 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
EFM32LG232F64-QFP64T
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
EFM32LG232F64G-E-QFP64
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
EFM32LG232F64-QFP64 최대 정격 & 전기적 특성
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Processor Core | ARM Cortex-M3 |
| 최대 클록 주파수 | 48 MHz |
| Flash Memory | 64 KB |
| RAM Memory | 32 KB |
| Supply Voltage Range | 1.98 V to 3.8 V |
| 패키지 | 64-pin TQFP |
| 실장 유형 | Surface mount |
| Security Feature | AES hardware acceleration |
| Stop Mode Current | 0.65 µA minimum |
| Run Mode Current | 211 µA/MHz |
| Series | EFM32LG Leopard Gecko |
| Word Size | 32-bit |
| Program Memory Architecture | 64K x 8-bit Flash |
| RAM Architecture | 32K x 8-bit RAM |
| Typical Operating Voltage | 2.5 V or 3.3 V |
EFM32LG232F64-QFP64 64-pin tqfp 핀 구성 가이드
EFM32LG232F64-QFP64(64-pin tqfp 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EFM32LG232F64-QFP64.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EFM32LG232F64-QFP64 적합 용도: 6 애플리케이션s: Battery-Powered Sensor Node, Industrial Monitoring Controller, Wearable Health Device, Connected IoT Gateway, Low-Power Consumer Controller, Secure Embedded Control Module.
Battery-Powered Sensor Node
The EFM32LG232F64-QFP64 fits a battery-powered environmental sensor because its 48 MHz ARM Cortex-M3 core provides control capacity while the EFM32LG family supports low-power operation. The Stop-mode current can be as low as 0.65 µA, and Run-mode current is specified at 211 µA/MHz, enabling a duty-cycled design that wakes to sample, processes, transmits, and returns to sleep. With 64 KB Flash and 32 KB RAM, the MCU can hold application firmware, calibration data, acquisition buffers, and communication state without external memory. A 1.98 V to 3.8 V operating range also supports integration with low-energy regulator architectures, although the complete power budget must include sensor, radio, and regulator losses.
추천
Industrial Monitoring Controller
The EFM32LG232F64-QFP64 can serve as the control processor for an industrial monitoring module that combines sensor acquisition, local filtering, status reporting, and communications. Its 48 MHz ARM Cortex-M3 core provides useful throughput for real-time control without requiring a higher-power application processor, while 64 KB Flash and 32 KB RAM support compact embedded firmware. The 64-pin TQFP package exposes a practical number of pins for digital interfaces and analog-capable peripheral assignments. For industrial deployment, verify the exact temperature grade and qualification status of the selected orderable. Also design the analog front end, watchdog behavior, reset strategy, and communications isolation to meet the target environmental requirements.
추천
Wearable Health Device
The EFM32LG232F64-QFP64 is suitable for a wearable health device that gathers movement or physiological measurements while keeping energy use under control. The 48 MHz Cortex-M3 core can process sampled data, manage a user interface, and support encrypted communication, while the EFM32LG family's Stop mode can be as low as 0.65 µA for long inactive intervals. Its 32 KB RAM is useful for short-term sample buffering, and 64 KB Flash supports embedded application code and configuration. AES hardware acceleration provides a useful foundation for protecting device data, but it does not replace secure boot, unique keys, authenticated updates, or protected key storage. Confirm package dimensions and the exact operating-temperature grade for the final wearable enclosure.
추천
Connected IoT Gateway
The EFM32LG232F64-QFP64 can act as the local controller in a compact IoT gateway or edge node that aggregates data from sensors and forwards status over a serial or low-speed network interface. Its 48 MHz Cortex-M3 core, 64 KB Flash, and 32 KB RAM are sufficient for protocol management, state machines, diagnostics, and moderate data buffering. The 1.98 V to 3.8 V supply range supports integration with common embedded rails, while AES assistance can improve the efficiency of encrypted link processing. The device is best suited to constrained edge tasks rather than heavy application processing. A practical design should allocate pins early, keep sensitive communications paths controlled, implement robust watchdog recovery, and confirm that the package and orderable suffix match the production PCB.
추천
Low-Power Consumer Controller
The EFM32LG232F64-QFP64 is appropriate for a low-power consumer accessory that combines button input, status indication, and limited local processing. The 48 MHz Cortex-M3 core provides enough performance for responsive control logic, while the Leopard Gecko family's 0.65 µA Stop-mode figure supports a low-drain design. Its 64 KB Flash and 32 KB RAM reduce the need for external storage in simple products. The 64-pin TQFP package is easy to inspect and assemble compared with very small leadless packages. Engineers should still account for quiescent current from the regulator and other system loads, use a defined brownout and reset strategy, and avoid leaving unused inputs in an indeterminate state. Validate the complete current profile over each operating mode rather than relying on one headline power number.
추천
Secure Embedded Control Module
The EFM32LG232F64-QFP64 can support a secure embedded control module where firmware confidentiality and authenticated communication are important. The MCU provides AES hardware acceleration, a 48 MHz ARM Cortex-M3 core, and dedicated memory resources of 64 KB Flash and 32 KB RAM. These features allow an encryption-enabled communication stack and local control logic to coexist efficiently. The same-family orderable identified as EFM32LG232F64G-E-QFP64 should be evaluated when its ordering suffix offers a relevant qualification or environmental distinction. Security implementation must still include protected key provisioning, secure boot, debug-lock policy, signed firmware updates, and controlled manufacturing access. Use the manufacturer security and programming documentation when defining the production workflow.
추천
추천 제품 요약
엔지니어링 참조 데이터: EFM32LG232F64-QFP64 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EFM32LG232F64-QFP64T | EFM32LG232F64G-E-QFP64 |
|---|---|---|---|
| Package | 64-pin TQFP | 64-pin TQFP | 64-pin TQFP |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs |
| Processor Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum Clock Frequency | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB |
| RAM Memory | 32 KB | 32 KB | 32 KB |
| Security Feature | AES hardware acceleration | AES hardware acceleration | AES hardware acceleration |
| Ordering Configuration | EFM32LG232F64-QFP64 | EFM32LG232F64-QFP64T | EFM32LG232F64G-E-QFP64 |
주요 차별점
- Documented core and memory configuration (vs EFM32LG232F64-QFP64T)
- Direct 64-pin TQFP footprint alignment (vs EFM32LG232F64G-E-QFP64)
- Low-power family characteristics (vs EFM32LG232F64-QFP64T)
설계 노트
Use the manufacturer's EFM32LG supply recommendations to select the operating rail, regulator, decoupling, and power-sequencing network. The EFM32LG232F64-QFP64 operates from 1.98 V to 3.8 V, so the complete system must remain inside that range during startup, sleep transitions, and maximum load. Keep analog and digital return-current paths controlled, and evaluate regulator quiescent current together with the MCU's Stop-mode value when designing a battery-powered product.
Place required bypass capacitors close to the device power pins and return them to a low-impedance ground plane. Follow the EFM32LG data-sheet layout guidance for the 64-pin TQFP footprint, including exposed-pad or thermal-copper requirements if applicable to the exact package. Confirm land patterns against the latest mechanical drawing before fabrication, and keep high-current return paths away from sensitive analog and communications nodes.
Do not select an orderable solely because its name ends in QFP64. For each substitute, verify the complete orderable suffix, temperature range, qualification status, clock and memory configuration, pin assignments, and production packaging. The two listed same-package alternatives should receive schematic, footprint, firmware, timing, and production-programming validation before they are treated as interchangeable with the EFM32LG232F64-QFP64.
Assign communications and high-speed signals according to the exact peripheral pin table, and provide termination appropriate to the interface standard and signal rate. When using analog inputs, establish a deliberate grounding strategy and keep switching outputs and radio-related return currents from disturbing sensitive measurements. Validate timing margins with the selected clock configuration and include recovery behavior for brownout, watchdog reset, and low-power wake events.
규정 준수 정보
The available manufacturer and distributor technical summaries do not state the requested compliance statuses. The exact orderable suffix should be checked against the manufacturer compliance documentation before production use.