EFM32TG110F32-QFN24T - 32MHz Cortex-M3 MCU | Silicon Labs
부품 번호: EFM32TG110F32-QFN24T ✓ 활성EFM32TG110F32-QFN24T 개요
A microcontroller is a programmable semiconductor that integrates a processor core, memory, digital I/O, timers, analog interfaces, and communication peripherals on one integrated circuit. The EFM32TG110 belongs to Silicon Labs' Tiny Gecko family, a low-power 32-bit MCU product hierarchy designed for battery-operated systems, portable instruments, connected sensors, and industrial devices. Its ARM Cortex-M3 core provides a 32-bit instruction set and a familiar embedded software platform.
The headline specifications are a maximum clock speed of 32 MHz, 32 kB of Flash, and 4 kB of RAM. Silicon Labs specifies 17 digital I/O pins, two 16-bit timers, and an operating supply range of 1.85 V to 3.8 V. The family also emphasizes low-power operation, with the EFM32TG data sheet reporting consumption as low as 0.6 uA in Stop mode and 150 uA/MHz in Run mode.
The integrated feature set makes the EFM32TG110 suitable for designs that need more processing capability than an 8-bit controller without moving to a larger, higher-power MCU. Peripherals can perform measurements, timing, and control tasks while the processor sleeps, helping reduce overall energy use in duty-cycled systems. The 32 kB Flash capacity is appropriate for compact firmware, while 4 kB of RAM supports protocol buffers, sampled data, and application state.
Typical uses include low-power sensor nodes, compact industrial monitoring equipment, battery-powered accessories, wearable electronics, and connected IoT products. In each case, the combination of a 32 MHz Cortex-M3 core, low-power modes, and a small 24-QFN footprint supports responsive control without requiring a large system-on-chip. The exposed thermal pad also provides a direct heat-spreading path on multilayer PCBs.
Hardware design must follow Silicon Labs' power and grounding recommendations. The EFM32TG requires AVDD_x, VDD_DREG, and IOVDD_x to be connected together, optionally through a filter, as described in the EFM32TG data sheet and AN0002 EFM32 Hardware Design Considerations. Careful placement of decoupling capacitors, a continuous ground plane, and adequate exposed-pad thermal vias is essential for stable operation and predictable electromagnetic performance.
This page combines manufacturer specifications, package information, drop-in family alternatives, application guidance, and PCB-oriented engineering notes. It also distinguishes the F32 memory configuration from lower-memory Tiny Gecko variants and identifies where firmware capacity, RAM requirements, temperature grade, or packaging must be checked before approving a replacement.
드롭인 대체품: EFM32TG110F32-QFN24T — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EFM32TG110F32-QFN24T (동일 폼 팩터 및 풋프린트) — 차이점: Package, Flash Memory, Digital I/O Pins, Series, Supply Voltage Range.
EFM32TG110F16-QFN24T
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
EFM32TG110F8-QFN24
✅ 드롭인가격 문의
데이터시트 보기 →EFM32TG110F8-D-QFN24R
✅ 드롭인가격 문의
데이터시트 보기 →EFM32TG108F8-D-QFN24R
✅ 드롭인가격 문의
데이터시트 보기 →EFM32TG110F4-QFN24T
✅ 드롭인가격 문의
데이터시트 보기 →EFM32TG110F32-QFN24T 최대 정격 & 전기적 특성
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Series | EFM32 Tiny Gecko |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 32 kB |
| RAM | 4 kB |
| Digital I/O Pins | 17 pins |
| Timer Count | 2 x 16-bit timers |
| Supply Voltage Range | 1.85 V to 3.8 V |
| Processor Core | ARM Cortex-M3 |
| Architecture | 32-bit RISC |
| 패키지 | 24-QFN, 5 mm x 5 mm |
| Exposed Pad | Present |
| 실장 유형 | Surface mount |
| Shipping Format | Tape and reel |
| Stop Mode Current | As low as 0.6 uA |
| Run Mode Current | 150 uA/MHz |
| AES Support | Yes |
| Operational Amplifiers | 3 |
EFM32TG110F32-QFN24T 24-qfn, 5 mm x 5 mm 핀 구성 가이드
EFM32TG110F32-QFN24T(24-qfn, 5 mm x 5 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EFM32TG110F32-QFN24T.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EFM32TG110F32-QFN24T 적합 용도: 6 애플리케이션s: Battery-Powered IoT Sensor Nodes, Portable Industrial Monitoring, Wearable Health and Fitness Devices, Smart Home Sensor and Actuator Nodes, Low-Power Instrumentation, Battery-Powered Accessory Controllers.
Battery-Powered IoT Sensor Nodes
The EFM32TG110F32-QFN24T fits compact sensor nodes that periodically measure, process, and transmit data under strict energy constraints. Its 32 MHz ARM Cortex-M3 provides enough computation for local filtering and protocol handling, while 32 kB of Flash stores application firmware and 4 kB of RAM supports short data buffers. The Tiny Gecko platform can reach 0.6 uA in Stop mode and operates at 150 uA/MHz in Run mode, making duty-cycled operation practical. A 24-QFN footprint also limits board area compared with many leaded microcontroller packages. Final power-budget validation should include sensor standby current, radio activity, regulator quiescent current, and the interval between wake-up events.
추천
Portable Industrial Monitoring
The EFM32TG110F32-QFN24T is appropriate for portable condition-monitoring equipment that combines sensor acquisition, local control, and communications. Its 17 digital I/O pins and two 16-bit timers support digital inputs, alarm signaling, and periodic measurement tasks, while the Cortex-M3 core can execute control logic between samples. At 32 MHz, the device provides deterministic performance for small embedded applications without requiring a larger processor. The 32 kB Flash and 4 kB RAM allow more complex algorithms than an 8-bit alternative, but firmware must still fit after including drivers and protocol stacks. Use the exposed-pad thermal path and continuous ground plane when operating continuously in a sealed enclosure.
추천
Wearable Health and Fitness Devices
The EFM32TG110F32-QFN24T supports wearable devices that combine motion sensing, user interaction, and low-power background operation. Its compact 24-QFN package leaves board area for sensors and a battery, while the 32-bit Cortex-M3 core can process sampled motion data and manage device states. The 4 kB RAM is suitable for short sample windows and protocol state, although larger sensor buffers may require partitioning or external memory. Low-current Stop operation is valuable for always-on wearables, but the complete current budget must include the sensor, radio, regulator, and leakage paths. Validate the final layout against the manufacturer's analog-supply and exposed-pad recommendations to maintain low-noise and predictable behavior.
추천
Smart Home Sensor and Actuator Nodes
The EFM32TG110F32-QFN24T can serve as the local controller in a smart-home sensor or actuator node. Seventeen digital I/O pins are useful for discrete inputs, output indicators, and simple peripheral control, while two 16-bit timers support timing-intensive tasks such as debouncing, pulse measurement, and periodic sampling. The MCU can remain in a low-power state between network interactions, reducing energy use compared with continuously running control. Its 32 kB Flash provides room for communication and application logic, but full protocol stacks must be checked against the final linker map. Place the device near the sensor interface, use short ground returns, and keep switching or radio supply paths separated from sensitive analog routing.
추천
Low-Power Instrumentation
The EFM32TG110F32-QFN24T is well matched to compact instrumentation that combines control, timing, and measured data processing. The 32 MHz Cortex-M3 executes faster than typical low-end 8-bit controllers, while the two 16-bit timers provide useful timing resources for sensor excitation, sample triggers, and output updates. Thirty-two kilobytes of Flash accommodates moderate control software, and 4 kB of RAM supports calibration values and rolling measurement windows. For sensitive measurements, follow the manufacturer's guidance on analog supplies, grounding, and filtering rather than routing analog and switching return currents through the same narrow path. Validate timing at the highest intended clock frequency and evaluate thermal rise in the smallest permitted enclosure.
추천
Battery-Powered Accessory Controllers
The EFM32TG110F32-QFN24T can control compact battery-powered accessories requiring more logic than a basic 8-bit MCU. The 32-bit core and 32 kB Flash accommodate state machines, communication handling, and configuration logic, while the 17 I/O pins reduce the need for external logic when driving indicators, switches, or sensors. Low-power Stop behavior supports designs that remain available without continuously running the processor. The 1.85 V to 3.8 V supply range fits 2.5 V and 3.3 V power systems, although regulator startup, load transients, and brownout behavior must be checked together. A thermal pad connected to solid ground improves heat spreading without requiring a large mechanical heatsink.
추천
추천 제품 요약
엔지니어링 참조 데이터: EFM32TG110F32-QFN24T — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EFM32TG110F16-QFN24T | EFM32TG110F8-QFN24 | EFM32TG110F8-D-QFN24R | EFM32TG108F8-D-QFN24R | EFM32TG110F4-QFN24T |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 24-QFN (5x5 mm) | 24-QFN (5x5 mm) | 24-QFN (5x5 mm) | 24-QFN (5x5 mm) | 24-QFN (5x5 mm) | 24-QFN (5x5 mm) |
| Processor Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Flash Memory | 32 kB | 16 kB | 8 kB | 8 kB | 8 kB | 4 kB |
주요 차별점
- Largest Flash configuration among the listed EFM32TG110 drop-in alternatives (vs EFM32TG110F16-QFN24T)
- Twice the RAM of the EFM32TG110F8 option (vs EFM32TG110F8-QFN24)
- Eight times the Flash of the F4 family alternative (vs EFM32TG110F4-QFN24T)
설계 노트
Silicon Labs specifies that AVDD_x, VDD_DREG, and IOVDD_x be connected together at the PCB level, optionally with filtering. Implement the connection and local bypass capacitors according to the EFM32TG data sheet and AN0002 EFM32 Hardware Design Considerations. Keep the supply-return path short and place the exposed pad over an uninterrupted ground plane so switching and analog currents do not share a narrow return segment.
Estimated thermal performance depends on the PCB copper area, exposed-pad via pattern, ambient temperature, and enabled peripherals. Start with a solid ground plane under the 24-QFN and a thermal-via array specified by Silicon Labs, then validate the hottest operating condition in the final enclosure. Do not assume that the small package alone requires no thermal analysis; a poorly vented enclosure can retain heat even when the MCU load is moderate.
Place input, output, and supply-bypass capacitors close to their associated device pins, with short and wide traces to reduce loop area. Route the exposed-pad connection directly into the ground plane without narrow necks. Keep clock-sensitive, analog, and communication routes away from switching-node currents, and use a continuous ground reference beneath digital interfaces. Review the manufacturer package drawing and pin-description table before releasing copper because exposed-pad connections are package-specific.
A lower-memory family variant may fit the same footprint but fail to load the intended firmware. Before replacing the F32 device with an F16, F8, or F4 configuration, compare the final linker-map size, RAM peak, bootloader, peripheral set, clock setup, and device identification. Treat the T tape-and-reel suffix and D ordering suffix as separate commercial order codes, and verify the exact MPN in the manufacturer's ordering information.
규정 준수 정보
The EFM32TG family data sheet does not establish a specific RoHS, REACH, halogen-free, conflict-minerals, or AEC-Q100 status for this ordering code. Confirm environmental and qualification requirements with Silicon Labs for the exact device and orderable suffix.