EP1C12Q240C6 - Cyclone FPGA, 12K LE, 240-PQFP | Intel
부품 번호: EP1C12Q240C6 ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $43.5 | $43.50 |
| 10 | $40 | $400.00 |
| 100 | $36 | $3,600.00 |
| 500 | $32.5 | $16,250.00 |
| 1,000 | $29 | $29,000.00 |
EP1C12Q240C6 개요
A field-programmable gate array is an integrated circuit whose logic fabric and routing can be reconfigured after manufacturing. FPGAs sit above CPLD complexity and implement parallel hardware functions such as state machines, bus bridges, image-processing pipelines, and protocol acceleration. The Cyclone family was Altera's low-cost FPGA series and was positioned between MAX CPLDs and high-end Stratix FPGAs; EP1C12 specifically occupies the mid-density segment of that product hierarchy.
Key EP1C12Q240C6 features include 12,060 logic elements arranged in 1,206 LABs, 173 usable I/O pins, and 239,616 bits of embedded RAM. This resource density provides enough fabric to implement soft controller cores, line buffers, communication controllers, and user-defined coprocessors. The 405.2 MHz internal switching figure, listed in parametric search results, helps designers estimate timing headroom for synchronous designs implemented in this device.
At the architecture level, Cyclone FPGAs use a segmented routing fabric with logic array blocks containing ten logic elements each. The 1.5 V core differentiates the device from earlier 2.5 V/3.3 V FPGAs, lowering dynamic power, while 130 nm lithography reduces cost. The Q240 package exposes 184 or more signals in a surface-mount PQFP, making it easier to route than high-density ball-grid arrays on four-layer boards.
Typical applications include industrial motor-control logic, video capture and scaling, communication-protocol bridging, medical interface boards, and embedded test-and-measurement front ends. Its 173 user I/O pins allow direct connection to SRAM, ADCs, DACs, displays, and backplane transceivers without excessive external logic.
Because this is an SRAM-based FPGA, it must be configured from an external source such as an EPC/EPCS serial configuration device or a host processor after power-up. The 240-pin PQFP package requires careful decoupling of the 1.5 V core rail and the 3.3 V I/O rail, plus attention to configuration pin strapping.
This page synthesizes distributor price references, pin-compatible same-family alternatives, and practical power and layout guidance not found in a single datasheet search result. You can quickly compare EP1C12Q240C6 packaged and lead-free alternatives without loading multiple distributor pages.
드롭인 대체품: EP1C12Q240C6 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EP1C12Q240C6 (동일 폼 팩터 및 풋프린트) — 차이점: Process Technology, Speed Grade, Package, Family, Total RAM Bits.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EP1C12Q240C6N
✅ 드롭인✓ 재고 있음
$119 / 개
데이터시트 보기 →EP1C12Q240C7N
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$22.8 / 개
데이터시트 보기 →EP1C12Q240C8N
✅ 드롭인✓ 재고 있음
$24.8 / 개
데이터시트 보기 →EP1C12Q240I7N
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$30.85 / 개
데이터시트 보기 →EP1C12Q240C8
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$23.1 / 개
데이터시트 보기 →EP1C12Q240C6 최대 정격 & 전기적 특성
| FPGA Family | Cyclone |
| Logic Elements | 12060 cells |
| Logic Array Blocks (LABs) | 1206 |
| Total RAM Bits | 239616 |
| User I/O Count | 173 |
| Core Supply Voltage | 1.5 V |
| Process Technology | 130 nm |
| Maximum Internal Frequency | 405.2 MHz |
| Package Type | 240-PQFP (BFQFP) |
| 핀 수 | 240 |
| 실장 유형 | Surface Mount |
| Part Category | FPGA (Field Programmable Gate Array) |
EP1C12Q240C6 240-pqfp (bfqfp) 핀 구성 가이드
EP1C12Q240C6(240-pqfp (bfqfp) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EP1C12Q240C6.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EP1C12Q240C6 적합 용도: 6 애플리케이션s: Industrial Automation and Motor Control, Communication Protocol Bridging, Video and Image Acquisition Front-End, Medical Device Interface Board, Test and Measurement Instrumentation, Embedded Prototyping and Education.
Industrial Automation and Motor Control
The EP1C12Q240C6 suits industrial motor control because its 12,060 LEs can implement three-phase PWM state machines, resolver/encoder decoding, and fault-protection interlock logic in parallel hardware. With 173 user I/O, it can monitor Hall sensors, current-sense ADCs, and drive gate-driver signals without an external CPLD for glue logic. The 1.5V core reduces power in closed cabinets, while 405.2MHz capability gives headroom for high-frequency current-loop calculations. In a typical servo drive, the FPGA sits between a host MCU and gate driver array, offloading timing-critical PWM generation. Because it is SRAM-based, it must boot from an EPCS serial configuration flash; the PQFP package is easier to route on a four-layer industrial controller board than a BGA.
추천
Communication Protocol Bridging
This FPGA is well suited to protocol bridging because its logic density allows multiple serial ports, FIFOs, and simple CPU cores to coexist in parallel fabric. The 173 I/O pins can connect to UART/SPI/I2C transceivers, Ethernet PHYs, and backplane transceivers while leaving pins for status LEDs and control. The 239,616 RAM bits provide useful packet buffering for short frames, reducing the burden on an external SRAM. Operating from 1.5V core and 3.3V I/O, the EP1C12Q240C6 matches common FPGA I/O voltages used in communication line cards. Designers must pay attention to configuration during power-up so that the bridge does not hold the backplane in an undefined state until the bitstream is loaded.
추천
Video and Image Acquisition Front-End
In video capture boards, EP1C12Q240C6 can receive parallel digital video from CMOS sensors or ADCs, perform line buffering, color space conversion, and simple filtering before passing pixel streams to a downstream DSP or SoC. The 239,616 RAM bits are enough for several horizontal line buffers at VGA/480p resolutions, while the 173 user I/O connect to sensor control signals, SDRAM address/data buses, and host interface logic. The high 405.2 MHz internal clock supports pixel rates common in standard-definition video without difficulty. Because video systems often require multiple power rails, the 1.5V core and 3.3V I/O must be well decoupled close to the FPGA pins. Configuration from EPCS flash allows autonomous boot in camera and machine-vision products.
추천
Medical Device Interface Board
Medical monitoring equipment often requires deterministic data acquisition and isolation control. The EP1C12Q240C6 can integrate multi-channel analog front-end control, digital filtering, and host-interface timing in one programmable device, enabling last-minute algorithm changes without PCB revision. Its 12,060 logic elements are sufficient for decimation filters, threshold detection, and alarm logic, while the 173 I/O pins connect to ADCs, DACs, display panels, and isolated communication transceivers. The device's SRAM-based nature means the configuration bitstream should be stored in secure or checksum-protected external flash. When designing for medical safety standards, careful power sequencing and separate I/O banks for sensitive analog ground boundaries help reduce digital noise coupling; this FPGA's pin count and 1.5V core are favorable for compact medical interface boards.
추천
Test and Measurement Instrumentation
Benchtop instruments use FPGAs to handle trigger logic, time-stamping, pattern generation, and data formatting. The EP1C12Q240C6 provides ample logic to build custom trigger machines and high-speed counters with tight deterministic timing. Its 239,616 RAM bits function as acquisition buffers for moderate record lengths, while 173 user I/O connect to comparators, ADCs, DACs, and front-panel controls. Because test equipment is often deployed for many years, designers should consider the full lifecycle and the availability of compatible EP1C12Q240 variants for repair and redesign. The 240-pin PQFP package allows prototyping on standard four-layer boards without expensive BGA socketing. For measurement accuracy, separate analog and digital grounds and localized 1.5V core decoupling are critical layout steps.
추천
Embedded Prototyping and Education
For teaching digital design and FPGA prototyping, the EP1C12Q240C6 is an approachable mid-density device because it fits simple RISC soft-core processors, basic VGA generators, and custom peripheral controllers. Its 240-pin PQFP is easier to solder in labs than high-pin-count BGAs, and the 1.5V core keeps power dissipation low enough for desk-top development boards. The available 173 I/O pins are sufficient to interface to seven-segment displays, push buttons, SRAM, and UART-to-USB bridges. When used with a downloadable Cyclone bitstream, students can explore combinational and sequential logic. Since this FPGA is SRAM-based, every experiment begins with a configuration load; this also makes it easy to recover from incorrect designs. Legacy leaded finish on the non-N variant may require careful handling in academic environments that mandate RoHS.
추천
추천 제품 요약
엔지니어링 참조 데이터: EP1C12Q240C6 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EP1C12Q240C6N | EP1C12Q240C8N | EP1C12Q240I7N |
|---|---|---|---|---|
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Family | Cyclone | Cyclone | Cyclone | Cyclone |
| Package | PQFP-240 (BFQFP) | PQFP-240 (BFQFP) | PQFP-240 (BFQFP) | PQFP-240 (BFQFP) |
| Logic Elements | 12060 | 12060 | 12060 | 12060 |
| Total RAM Bits | 239616 | 239616 | 239616 | 239616 |
| User I/O Count | 173 | 173 | 173 | 173 |
| Core Supply Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
| Process Technology | 130 nm | 130 nm | 130 nm | 130 nm |
| Speed / Temperature Grade | C6 (commercial, speed -6) | C6N (commercial, speed -6, lead-free) | C8N (commercial, speed -8, lead-free) | I7N (industrial, speed -7, lead-free) |
주요 차별점
- Fastest Q240 speed grade available in the EP1C12 family (vs EP1C12Q240C8N)
- Legacy leaded finish can support non-RoHS soldering flows (vs EP1C12Q240C6N)
- Same-family migration path preserves PCB layout (vs FPGAs from other vendors)
설계 노트
The EP1C12Q240C6 uses a 1.5V core supply and 3.3V I/O supply. Provide a low-noise 1.5V regulator with sufficient current for the configured design; total current scales with logic utilization and toggle rate. Place a 10uF bulk capacitor plus multiple 0.1uF ceramic capacitors around the VCCINT pins. The PQFP-240 package has no exposed thermal pad, so copper pours on the top and bottom layers beneath the device help dissipate heat. Estimated power can only be calculated after place-and-route reports are generated; use the Quartus Power Analyzer for accurate numbers.
Route I/O traces from the 173 user pins with controlled impedance if the design connects to high-speed interfaces. Keep the 1.5V core plane and 3.3V I/O plane separated and place decoupling capacitors as close as possible to each VCC and GND pin. For the 240-pin PQFP, ensure the soldermask opening and pad size match IPC recommendations to avoid tombstoning. If using a socket for prototyping, add test points on all configuration pins because debug access to EPCS and JTAG lines is essential during bring-up.
Do not forget that this SRAM FPGA needs external configuration at every power-up. If the CONF_DONE and nSTATUS pins are left floating or incorrectly pulled, the FPGA may not enter user mode. Verify MSEL pin strapping for the selected configuration scheme (JTAG, passive serial, or active serial). Also check that all 173 I/O pins are assigned to legal I/O banks with compatible voltage references; connecting a 2.5V interface to a 3.3V-bank pin can damage the device.
규정 준수 정보
The EP1C12Q240C6 part number does not carry the Altera -N lead-free suffix, so RoHS/lead-free status is treated as unknown based on the verified data. The -N versions (C6N, C7N, C8N, I7N) are typically lead-free/RoHS, but this was not explicitly confirmed in the provided records.
