EP1C12Q240C7N - Cyclone 12,060 LEs FPGA 1.5V 240-PQFP | Intel
부품 번호: EP1C12Q240C7N ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $38.5 | $38.50 |
| 10 | $33.2 | $332.00 |
| 100 | $28.45 | $2,845.00 |
| 500 | $25.1 | $12,550.00 |
| 1,000 | $22.8 | $22,800.00 |
EP1C12Q240C7N 개요
An FPGA (Field-Programmable Gate Array) is a semiconductor integrated circuit composed of configurable logic blocks (CLBs), programmable interconnect, and dedicated I/O cells that the designer can re-program in the field. FPGAs sit at the top of the programmable logic hierarchy: programmable logic device (PLD) -> CPLD -> FPGA -> SoC FPGA. Unlike a CPLD, which is non-volatile and best for small glue-logic functions, an FPGA uses SRAM-based configuration (for the Cyclone family, loaded from external flash at boot) and scales to tens of thousands of logic elements with embedded multipliers and memory blocks, making it the workhorse of custom digital hardware prototyping and low-volume production.
Key features include 12,060 logic elements (roughly equivalent to 12,060 4-input look-up tables), 52 embedded 4-Kbit M4K memory blocks totaling 239,616 RAM bits, 173 maximum user I/O pins distributed across four I/O banks, and dedicated dual-clock PLLs. The 130 nm process node keeps dynamic and static power low compared to earlier families such as APEX 20K, while the 240-pin PQFP package exposes enough I/O to drive parallel buses, video interfaces, and multi-channel control planes without requiring a BGA fan-out.
Typical applications include industrial control and factory automation, low-cost video processing pipelines, motor and stepper control, custom peripheral bridges for microprocessors, and communications glue logic. The wide I/O count and 320 MHz internal fabric comfortably support legacy parallel interfaces (PCI up to 33 MHz, 16/32-bit SRAM/Flash buses, LVDS via external resistors) as well as modern LVCMOS 3.3 V and 2.5 V logic.
When designing with this device, plan the configuration memory: Cyclone FPGAs are SRAM-based and require a serial or parallel configuration flash. Also note that the C7 speed grade (-7) is the slowest tier of the Cyclone I family; pin-compatible C6, C7, C8, and I7 variants allow designers to up-screen or relax timing without re-laying out the PCB.
This page synthesizes distributor pricing, pin-compatible Cyclone I speed-grade variants, and practical design notes that are not consolidated in the original datasheet.
드롭인 대체품: EP1C12Q240C7N — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EP1C12Q240C7N (동일 폼 팩터 및 풋프린트) — 차이점: Process Technology, Package, Speed Grade, Family, Total RAM Bits.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EP1C12Q240C6N
✅ 드롭인✓ 재고 있음
$119 / 개
데이터시트 보기 →EP1C12Q240C8N
✅ 드롭인✓ 재고 있음
$24.8 / 개
데이터시트 보기 →EP1C12Q240I7N
✅ 드롭인✓ 재고 있음
$30.85 / 개
데이터시트 보기 →EP1C12Q240C7
✅ 드롭인✓ 재고 있음
$36.75 / 개
데이터시트 보기 →EP1C12Q240C6
✅ 드롭인✓ 재고 있음
$29 / 개
데이터시트 보기 →EP1C12Q240C6NAA
✅ 드롭인✓ 재고 있음
$29.4 / 개
데이터시트 보기 →EP1C12Q240C7N 최대 정격 & 전기적 특성
| Family | Cyclone |
| Series | Cyclone I |
| Manufacturer | Intel (formerly Altera) |
| Logic Elements | 12,060 |
| Configurable Logic Blocks (CLBs) | 12,060 |
| Total RAM Bits | 239,616 bits |
| Embedded Memory Blocks | 52 M4K blocks (4 Kbit each) |
| Maximum User I/O | 173 |
| Process Technology | 130 nm CMOS |
| Core Voltage | 1.5 V |
| Internal Performance | 320.1 MHz |
| Speed Grade | C7 (commercial, -7) |
| 동작 온도 | 0C to +85C (commercial) |
| 패키지 | 240-pin PQFP / BFQFP |
| Package Body Size | 34.60 x 34.60 mm |
| Lead Pitch | 0.50 mm |
| Terminal Form | Gull wing |
| 실장 유형 | Surface Mount |
| PLLs | 2 (dual-clock) |
| Configuration Method | SRAM, serial/parallel via external flash |
EP1C12Q240C7N 34.60 x 34.60 mm 핀 구성 가이드
EP1C12Q240C7N(34.60 x 34.60 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EP1C12Q240C7N.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EP1C12Q240C7N 적합 용도: 7 애플리케이션s: Industrial Control and Factory Automation, Custom Peripheral Bridge for Microprocessor, Low-Cost Video Processing Pipeline, Communications Glue Logic and Protocol Converters, ASIC Prototyping and Design Validation, Test and Measurement Instrumentation Front-End, Legacy Parallel Bus Extension (PCI, VME, ISA).
Industrial Control and Factory Automation
The EP1C12Q240C7N's 12,060 logic elements and 173 user I/Os make it well-suited for industrial PLC-style controllers driving multiple stepper and servo motor channels. The Cyclone I fabric at 320 MHz internal frequency is sufficient for 50 kHz PWM loops on up to 32 axes, while the four I/O banks cleanly separate 24 V field wiring (via opto-isolators) from the 3.3 V logic domain. Compared to a microcontroller, this FPGA gives deterministic parallel execution without task-switching jitter, which is critical for tight multi-axis motion synchronization on factory floors.
추천
Custom Peripheral Bridge for Microprocessor
Embedded systems often need a glue-logic bridge between a host CPU and legacy or proprietary peripherals. The EP1C12Q240C7N's 52 M4K memory blocks (239 Kbit total) can implement FIFO buffers, register files, and DMA descriptor rings without external SRAM. With 173 I/Os available, a single Cyclone I device can simultaneously drive 8/16-bit SRAM/Flash buses, expose JTAG-controlled register windows to the host, and bit-bang custom SPI/I2C peripherals. The 320 MHz internal fabric comfortably absorbs any protocol translation overhead.
추천
Low-Cost Video Processing Pipeline
The EP1C12Q240C7N supports real-time video processing at up to XGA (1024x768) at 60 Hz through its embedded M4K memory blocks, which can be configured as line buffers or frame-delay FIFOs. The four I/O banks accept LVCMOS 24-bit RGB inputs and LVDS pairs via external resistors, making it suitable for digital signage, KVM switches, and industrial camera pre-processing. Designers typically implement de-interlacing, color space conversion, and on-screen display blending in fabric, freeing the downstream processor for higher-level analytics.
추천
Communications Glue Logic and Protocol Converters
The EP1C12Q240C7N is widely used as a multi-protocol bridge converting between UART, SPI, I2C, CAN, and custom proprietary serial links. Its dual PLLs generate independent reference clocks for each protocol domain, while the 12,060 logic elements can host soft-cores (Nios II, custom state machines) for protocol parsing. The 130 nm process node keeps power dissipation below 0.5 W at full toggle rate, allowing fanless operation in sealed enclosures.
추천
ASIC Prototyping and Design Validation
Before committing to a mask set, ASIC designers port RTL to the EP1C12Q240C7N for hardware-in-the-loop validation. The Cyclone I 130 nm fabric gives a reasonably faithful timing model for the synthesized netlist, and the 239 Kbit of SRAM approximates many ASIC memory compilers. The 240-PQFP package is easy to socket for benchtop characterization, and Quartus Prime's LogicLock regions make it straightforward to isolate and re-spin functional blocks without re-flowing the board.
추천
Test and Measurement Instrumentation Front-End
The EP1C12Q240C7N's 173 user I/Os and 320 MHz fabric are valuable in benchtop instruments such as logic analyzers, protocol exercisers, and custom pattern generators. M4K memory blocks implement deep capture buffers, and the dual PLLs synchronize multiple sample-clock domains. The commercial temperature grade (0C to +85C) is sufficient for laboratory use, and the PQFP package is easy to rework during development cycles.
추천
Legacy Parallel Bus Extension (PCI, VME, ISA)
The EP1C12Q240C7N's abundant I/O count makes it ideal for legacy industrial buses that have no native support in modern microcontrollers. Designers use the Cyclone I fabric to implement PCI 32-bit/33 MHz target interfaces, VMEbus slave decoders, or ISA-style peripheral adapters for retrofitting old machinery. The 240-PQFP package exposes enough pins to break out 32 data, 24 address, and full control signals without multiplexing, simplifying timing closure.
추천
추천 제품 요약
엔지니어링 참조 데이터: EP1C12Q240C7N — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EP1C12Q240C6N | EP1C12Q240C8N | EP1C12Q240I7N | EP1C12Q240C7 |
|---|---|---|---|---|---|
| Package | 240-PQFP | 240-PQFP - same | 240-PQFP - same | 240-PQFP - same | 240-PQFP - same |
| Brand | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 12,060 | 12,060 | 12,060 | 12,060 | 12,060 |
| Speed Grade | C7 | C6 (faster) | C8 (slower) | I7 (industrial temp, same speed) | C7 (same, tray packaging) |
| Temperature Range | 0C to +85C (commercial) | 0C to +85C (commercial) | 0C to +85C (commercial) | -40C to +100C (industrial) | 0C to +85C (commercial) |
| User I/O | 173 | 173 | 173 | 173 | 173 |
| Embedded RAM | 239,616 bits (52 M4K blocks) | 239,616 bits | 239,616 bits | 239,616 bits | 239,616 bits |
| Core Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
| Lifecycle Status | Active | Active | Active | Active | Active |
주요 차별점
- Wide I/O count in a hand-solderable PQFP package (vs EP1C12F256C8N (256-FBGA))
- Same die across C6/C7/C8 speed grades enables speed scaling without PCB redesign (vs EP1C12Q240C8N (C8 speed grade))
- Industrial temperature variant available in the same footprint (vs EP1C12Q240I7N (industrial temp))
설계 노트
The EP1C12Q240C7N requires three supply rails: 1.5 V VCCINT (core), 3.3 V or 2.5 V VCCIO (I/O banks, bank-by-bank configurable), and an optional 3.3 V VCC_PLL for the analog PLL sections. Estimated: at full toggle rate on 12,060 LEs with all 173 I/Os driving 10 pF loads, ICCINT reaches approximately 400-500 mA. Use a 4-layer PCB with a dedicated ground plane and place 0.1 uF + 0.01 uF ceramic decoupling caps within 5 mm of every VCC pin pair to keep core-rail noise below 50 mV pk-pk.
The 240-PQFP package has 0.5 mm lead pitch and a 34.6 x 34.6 mm body size, which is at the practical limit of hand-soldering. Plan for a 4-layer PCB with a continuous ground plane beneath the device to provide a low-impedance return path for switching signals. All 173 user I/O pins should be routed on the top layer or near-surface microvias; long via stubs on high-speed I/O (>100 MHz) can cause impedance discontinuities that exceed Cyclone I timing margins.
Cyclone I FPGAs are SRAM-based and lose configuration when power is removed. A non-volatile configuration memory (EPCS4, EPCS16, or compatible third-party SPI flash) is mandatory. JTAG and AS configuration modes both require the MSEL[2:0] pins to be tied to specific levels per the datasheet; incorrect MSEL strapping is a common cause of first-board failures. Additionally, unused I/O pins should be configured as tri-stated inputs with weak pull-up to avoid floating inputs causing extra ICCCIO current.
Estimated: the 240-PQFP package has a theta_JA of approximately 25 C/W with a JEDEC JESD51 test board and no airflow. At a worst-case total power dissipation of 1.2 W (0.7 W core + 0.5 W I/O), the junction temperature rise above ambient is approximately 30 C. The commercial-grade part (0C to +85C) is safe up to 70 C ambient; for industrial deployments in enclosed cabinets above 70 C ambient, consider the EP1C12Q240I7N variant rated to +100 C.
규정 준수 정보
RoHS and lead-free compliance per Intel/Altera product documentation. Halogen-free status not explicitly listed in retrieved distributor data; please verify with manufacturer datasheet if required for your application. AEC-Q100 does not apply to commercial-grade FPGAs; choose automotive-screened variants for vehicle applications.
