EP1C12Q240I8ES - Cyclone FPGA, 240-pin PQFP | Intel
부품 번호: EP1C12Q240I8ES ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $9.5 | $9.50 |
| 10 | $8.8 | $88.00 |
| 100 | $8.1 | $810.00 |
| 500 | $7.6 | $3,800.00 |
| 1,000 | $7.15 | $7,150.00 |
EP1C12Q240I8ES 개요
An FPGA is an integrated circuit with reconfigurable logic blocks, programmable interconnects, and configurable I/O. Unlike a fixed-function ASIC, an FPGA can implement a new digital circuit by loading SRAM configuration data at power-up. In the system hierarchy, EP1C12Q240I8ES sits inside the broad class of programmable logic devices and more specifically in the FPGA subcategory used when a designer needs custom parallel logic without committing to a custom mask.
Key verified features of the EP1C12Q240I8ES include the 240-terminal FQFP package, Gull Wing terminal form, square QFP body, SRAM-based configuration, and JESD-609 code e0. The Partstack listing for this exact part reports a maximum supply voltage of 1.575 V, consistent with a nominal 1.5-V core design. The device supports device configuration and JTAG boundary-scan testing, as described in the Altera Cyclone FPGA Family Data Sheet.
Because the FPGA fabric is based on SRAM cells, every power-up requires an external configuration source. Designers should include a configuration header or serial configuration device on the same board. The 0.13-um copper process allows the family to integrate a large number of logic elements and memory bits while operating at a low 1.5-V core voltage, which reduces dynamic power compared with older 5-V programmable devices.
Typical applications for this 240-pin Cyclone device include industrial machine-vision preprocessing, custom motor-control PWM generation, FPGA training and prototyping, video capture interfaces, protocol bridging, and test-and-measurement triggering. The industrial temperature code and high pin count make it attractive for control boards that need many parallel I/O signals in a non-temperature-controlled environment.
During board design, pay attention to the 1.5-V core rail and separate I/O supply requirements. Place decoupling capacitors near every VCC pin group, route configuration and JTAG signals to a test header, and verify timing using the Quartus tool for the -8 speed grade. Since this part is discontinued, validate any replacement timing with the same tool before changing the BOM.
This page synthesizes datasheet-family evidence, current broker-oriented availability notes, drop-in EP1C12-Q240 family alternatives, and practical FPGA board-design guidance that is not repeated on a typical distributor listing.
드롭인 대체품: EP1C12Q240I8ES — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EP1C12Q240I8ES (동일 폼 팩터 및 풋프린트) — 차이점: Speed Grade, Package, Process Technology, Family, Total RAM Bits.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EP1C12Q240I7N
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$30.85 / 개
데이터시트 보기 →EP1C12Q240C8N
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$24.8 / 개
데이터시트 보기 →EP1C12Q240I7
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$30.1 / 개
데이터시트 보기 →EP1C12Q240C8
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$23.1 / 개
데이터시트 보기 →EP1C12Q240I6
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$55 / 개
데이터시트 보기 →EP1C12Q240C6N
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$119 / 개
데이터시트 보기 →EP1C12Q240I8ES 최대 정격 & 전기적 특성
| Manufacturer | Intel |
| Manufacturer Part Number | EP1C12Q240I8ES |
| FPGA Family | Cyclone |
| Programmable Logic Type | FPGA (field-programmable gate array) |
| Configuration Type | SRAM-based |
| FPGA Process | 1.5-V, 0.13-um, all-layer copper SRAM process |
| Maximum Family Logic Elements | 20,060 LEs |
| Maximum Family Embedded RAM | 288 Kbits |
| Package Code | FQFP |
| Package Description | 240-pin square QFP (PQFP/FQFP) |
| Number of Terminals | 240 |
| Terminal Form | GULL WING |
| Package Shape | Square |
| JESD-609 Code | e0 |
| Maximum Supply Voltage | 1.575 V |
| Nominal Core Supply Voltage | 1.5 V |
| Speed Grade | 8 |
| Temperature Grade Code | I (industrial) |
| Ordering Code Variant | ES (engineering sample) |
| Supported Configuration | Configuration and JTAG boundary-scan testing supported |
| RoHS 상태 | unknown |
EP1C12Q240I8ES square 핀 구성 가이드
EP1C12Q240I8ES(square 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EP1C12Q240I8ES.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EP1C12Q240I8ES 적합 용도: 6 애플리케이션s: Industrial Machine Vision Preprocessing, Industrial Motor Control and PWM Generation, Protocol Bridging and Communication Interfaces, Broadcast Video Capture and Display Control, FPGA Prototyping and Training Boards, Custom Test and Measurement Trigger Logic.
Industrial Machine Vision Preprocessing
The Intel EP1C12Q240I8ES is well suited for industrial machine-vision preprocessing because the Cyclone fabric provides many parallel I/O lanes through the 240-pin PQFP, letting the FPGA capture multiple camera or LVDS byte streams without serializing through a CPU. In this role, the logic implements Bayer color interpolation, simple filters, and frame timing while a host processor executes inference. Because Cyclone is SRAM-based on a 1.5-V 0.13-um process, power is lower than older 5-V FPGA families. The design should include a serial configuration device such as EPCS4SI8N and Quartus timing constraints for the pixel clock. The -8 speed grade is adequate for typical 25 to 50 MHz camera clocks, and the industrial I rating supports machine-vision modules mounted near production lines.
추천
Industrial Motor Control and PWM Generation
EP1C12Q240I8ES can implement multi-axis motor-control PWM, encoder decoding, and fault logic in a single programmable device. Its 240-pin gull-wing QFP package exposes enough general-purpose I/O to connect to isolated gate drivers, current-sense ADCs, and resolver interfaces. In this application, place the FPGA on the control-side logic rail, 1.5 V core plus appropriate VCCIO, not on the high-voltage power stage. Because the Cyclone is SRAM-based, it must be configured by a serial configuration device at power-up; hold configuration pins in reset until the core supply stabilizes. The industrial temperature grade fits servo drives and VFDs in non-conditioned cabinets. Timing closure for 100 kHz PWM dead-time counters is straightforward at speed grade -8.
추천
Protocol Bridging and Communication Interfaces
EP1C12Q240I8ES is useful for protocol bridging in industrial and communications equipment because the FPGA can buffer, translate, or synchronize several parallel or serial interfaces at the same time. The 240-pin package allows connection to Ethernet PHYs, UART transceivers, SRAM, and microcontrollers without expending CPLD resources. In a typical bridge, one side of the FPGA accepts a streaming parallel interface while the other side reads and writes FIFO-like registers; the SRAM-based fabric can be reprogrammed in the field when the protocol changes. Because the device is obsolete, prefer this part for legacy maintenance builds and use a same-family production alternative for new equipment. Keep the configuration device and JTAG header close to the FPGA pins to simplify field updates.
추천
Broadcast Video Capture and Display Control
The Cyclone family architecture of EP1C12Q240I8ES can perform video line buffering, horizontal and vertical timing generation, and pixel-format conversion in hardware. The 240-pin QFP lets designers connect parallel video ADC data buses, external SDRAM, and video DAC outputs without complex multiplexing. The 1.5-V core keeps dynamic power manageable in hot broadcast racks, but board planners should separate the digital FPGA power from the analog video clock domains. The I8ES engineering sample is a poor choice for new production video equipment because of its ES status and tin-lead finish; however, it can recreate the exact timing behavior of legacy video boards. Use an N-suffix production part for RoHS-compliant video assemblies.
추천
FPGA Prototyping and Training Boards
EP1C12Q240I8ES is a practical FPGA for prototyping custom digital logic in university labs and engineering training environments. Its 240-pin FQFP provides enough pins to connect to switches, LEDs, seven-segment displays, and simple memory interfaces, while the Cyclone 1.5-V SRAM architecture teaches modern low-power design methods. Because the part is discontinued, a training board should allow multiple Cyclone EP1C12-Q240 variants to be populated from the same footprint, especially the production I7N or C8N versions. Students can use the JTAG header to download designs directly with a USB-Blaster cable. For low-cost educational boards, package power with a 1.5-V regulator and verify that the FPGA configuration file is reloaded after every board power-up.
추천
Custom Test and Measurement Trigger Logic
EP1C12Q240I8ES can replace fixed timing ASICs in test and measurement instruments by implementing trigger logic, time stamping, and pattern generation in reconfigurable hardware. The 240 I/O pins allow direct connection to comparator banks, high-speed ADCs, and parallel counters. In a digitizer front end, the FPGA controls acquisition windows and data formatting before sending samples to a DSP or PC. Because the exact device is an ES variant, use it for lab validation of a legacy instrument and move to EP1C12Q240I7N for field-service spares. For reliable trigger generation, constrain the internal clock using an external precision oscillator rather than an unregulated internal PLL alone. This reduces cycle-to-cycle jitter in time-interval measurements.
추천
추천 제품 요약
엔지니어링 참조 데이터: EP1C12Q240I8ES — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EP1C12Q240I7N | EP1C12Q240C8N | EP1C12Q240I7 | EP1C12Q240C8 | EP1C12Q240I6 | EP1C12Q240C6N |
|---|---|---|---|---|---|---|---|
| Package | PQFP-240 / FQFP-240 | PQFP-240 / FQFP-240 | PQFP-240 / FQFP-240 | PQFP-240 / FQFP-240 | PQFP-240 / FQFP-240 | PQFP-240 / FQFP-240 | PQFP-240 / FQFP-240 |
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Device Family / Die | Cyclone EP1C12 | Cyclone EP1C12 | Cyclone EP1C12 | Cyclone EP1C12 | Cyclone EP1C12 | Cyclone EP1C12 | Cyclone EP1C12 |
| Speed Grade | -8 | -7 | -8 | -7 | -8 | -6 | -6 |
| Temperature Grade | Industrial (I) | Industrial (I) | Commercial (C) | Industrial (I) | Commercial (C) | Industrial (I) | Commercial (C) |
| Lead Finish / Suffix | e0 tin-lead, ES engineering sample | Pb-free N | Pb-free N | e0 tin-lead | e0 tin-lead | e0 tin-lead | Pb-free N |
| Configuration Type | SRAM-based, requires external configuration | SRAM-based, requires external configuration | SRAM-based, requires external configuration | SRAM-based, requires external configuration | SRAM-based, requires external configuration | SRAM-based, requires external configuration | SRAM-based, requires external configuration |
| Lifecycle Status | Obsolete / ES | Obsolete / production ordering code | Obsolete / production ordering code | Obsolete / production ordering code | Obsolete / production ordering code | Obsolete / production ordering code | Obsolete / production ordering code |
주요 차별점
- Industrial temperature code among the EP1C12-Q240 drop-in variants (vs EP1C12Q240C8N)
- Conservative -8 speed grade gives more timing margin for relaxed designs (vs EP1C12Q240I6)
- ES engineering-sample ordering code preserves an exact legacy prototype code (vs EP1C12Q240I7N)
설계 노트
Estimated: Cyclone core current is not given in the verified snippet. For an EP1C12-class design at 1.5 V, use the Quartus PowerPlay report after fitting to estimate Iccint; a common rough range for moderate designs is 300 to 800 mA, but use the fitted report for decoupling selection. Decouple each VCC/VCCIO pin group with 0.1 uF ceramic capacitors and add bulk 10 uF capacitance per supply rail. Keep the 1.5 V core supply below the 1.575 V maximum noted in the Partstack data.
The EP1C12Q240I8ES uses a 240-pin square gull-wing QFP. Use a land pattern that matches the package outline in the Cyclone FPGA Family Data Sheet, because a wrong QFP footprint can cause solder shorts on adjacent fine-pitch leads. Add thermal reliefs on the power planes connected to the package pads. Keep JTAG and configuration traces short and controlled if the design is sensitive to configuration noise.
Always bring TCK, TMS, TDI, TDO, CONF_DONE, and nSTATUS to a header on boards using EP1C12Q240I8ES. Since SRAM-based Cyclone devices need external configuration after power-up, a failed or missing configuration file shows up as a low nSTATUS or CONF_DONE. Add 10k pull-up resistors to CONF_DONE and nSTATUS and place the serial configuration device close to the FPGA configuration pins.
규정 준수 정보
JESD-609 code e0 in the source data indicates a tin-lead terminal finish, so the ES ordering code is likely not Pb-free. No explicit RoHS or REACH statement was present in the verified web data. The N-suffix alternatives in the Cyclone EP1C12-Q240 family are the lead-free ordering options.
