EP1K30QC208-3N - ACEX-1K FPGA, 30K Gates, 208-PQFP | Altera
부품 번호: EP1K30QC208-3N ⚠ 최종 구매| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $28.5 | $28.50 |
| 10 | $25.2 | $252.00 |
| 100 | $21.75 | $2,175.00 |
| 500 | $18.4 | $9,200.00 |
| 1,000 | $15.9 | $15,900.00 |
EP1K30QC208-3N 개요
A Field-Programmable Gate Array (FPGA) is a type of integrated circuit whose digital logic function is defined after manufacture by the end user through a configuration bitstream loaded into on-chip SRAM. FPGAs sit in the programmable-logic hierarchy alongside CPLDs and are commonly used as a flexible alternative to fixed-function ASICs for low- to mid-volume designs. Within the broader taxonomy, the ACEX-1K family belongs to low-cost, mid-density FPGAs -> programmable logic -> digital semiconductor -> integrated circuit. The EP1K30 specifically targets designs that need more than a CPLD but cannot justify a Cyclone or Stratix device.
Key features include 1,728 logic elements organized into 172 logic array blocks (LABs), 6 embedded array blocks (EABs) providing up to 24 Kbits of dual-port RAM, support for LVTTL, LVCMOS, PCI, SSTL-2, and other I/O standards, and a JTAG (IEEE 1149.1) interface for boundary-scan test and in-system programming. The device supports configuration via configuration EPROM, JTAG, or microprocessor-controlled serial/parallel modes, and is supported by the legacy Altera MAX+PLUS II and Quartus design software toolchains.
Typical applications include telecommunications line cards, industrial control and instrumentation, network routers and switches, glue-logic replacement, and bus-bridging interfaces (PCI, ISA, VME). The wide 24,576-bit on-chip memory (from 6 EABs) is also useful for FIFO buffers, lookup tables, and small dual-port memory blocks. Because the part is in active last-time-buy / mature status, current production use is dominated by long-lifecycle industrial, medical, and aerospace programs where redesign is impractical.
When designing with this device, observe the I/O bank supply (VCCIO) and core supply (VCCINT) requirements, provide proper decoupling on every supply pin, and respect the 5 V tolerance boundary when interfacing to legacy 5 V logic. The PQFP-208 package requires careful PCB layout for high-speed signals due to its leaded, longer-trace format compared with BGA alternatives.
This page synthesizes distributor pricing, drop-in same-package alternatives (EP1K30QC208-1N / -2N / -3), package pinout data, and practical design notes not found on the bare manufacturer datasheet.
드롭인 대체품: EP1K30QC208-3N — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EP1K30QC208-3N (동일 폼 팩터 및 풋프린트) — 차이점: Process Technology, Speed Grade, Package, Operating Temperature, RoHS Status.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EP1K30QC208-2N
✅ 드롭인✓ 재고 있음
$22.1 / 개
데이터시트 보기 →EP1K30QC208-1N
✅ 드롭인✓ 재고 있음
$29.88 / 개
데이터시트 보기 →EP1K30QC208-3
✅ 드롭인✓ 재고 있음
$9.75 / 개
데이터시트 보기 →EP1K30QC208-2
✅ 드롭인✓ 재고 있음
$7.9 / 개
데이터시트 보기 →EP1K30QC208-1
✅ 드롭인✓ 재고 있음
$10.85 / 개
데이터시트 보기 →EP1K30QC208-02
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
EP1K30QC208-3N 최대 정격 & 전기적 특성
| Family | ACEX-1K |
| Logic Elements | 1,728 |
| Typical Gates | 30,000 |
| Logic Array Blocks (LABs) | 172 |
| Embedded Array Blocks (EABs) | 6 (24 Kbits total) |
| Maximum User I/O | 147 |
| 패키지 | 208-BQFP / 208-PQFP |
| 실장 유형 | Surface Mount |
| 동작 온도 | Industrial (N suffix) |
| Speed Grade | -3 (fastest) |
| Process Technology | 0.18 µm CMOS, SRAM-based LUT |
| Core Supply Voltage | 2.5 V |
| I/O Supply Voltage (VCCIO) | 3.3 V (5 V tolerant I/O supported) |
| Configuration Interface | Serial / Parallel / JTAG (IEEE 1149.1) |
| RoHS 상태 | Compliant (lead-free / Pb-free) |
EP1K30QC208-3N 208-bqfp / 208-pqfp 핀 구성 가이드
EP1K30QC208-3N(208-bqfp / 208-pqfp 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EP1K30QC208-3N.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EP1K30QC208-3N 적합 용도: 6 애플리케이션s: Telecommunications Line-Card Glue Logic, Industrial Control & Instrumentation, Network Router & Switch Backplane Bridging, Glue-Logic Replacement & ASIC Prototyping, Military & Aerospace Avionics Interfaces, Medical Diagnostic Equipment I/O Controllers.
Telecommunications Line-Card Glue Logic
The EP1K30QC208-3N's 1,728 logic elements and 147 user I/O pins make it well-suited for telecom line-card glue logic, where the device bridges legacy 5 V TTL buses to 3.3 V LVCMOS ASICs and ASSPs. Its 5 V tolerant I/O on selected banks simplifies direct interfacing to legacy backplanes. The 6 EABs provide enough dual-port RAM for small FIFO buffers between TDM time-slots. Compared with a CPLD alternative, the EP1K30 offers finer-grained state-machine density. Designers typically place the EP1K30 between a T1/E1 framer and an FPGA-based protocol engine.
추천
Industrial Control & Instrumentation
In industrial control and instrumentation designs, the EP1K30QC208-3N's industrial temperature grade (N suffix), 24,576 bits of on-chip RAM, and 208-PQFP package provide a robust platform for motor-control glue logic, encoder-interface decoding, and HMI front-panel controllers. The device's 30,000-gate capacity is sufficient to absorb encoder counters, PWM modulators, and serial-protocol bridges (RS-485, CAN, SPI) in a single chip. The 208-PQFP package is also easy to inspect and rework on industrial production lines. Designed-in 2002-2010, the part remains widely deployed in long-lifecycle industrial equipment.
추천
Network Router & Switch Backplane Bridging
The EP1K30QC208-3N is widely used in mid-2000s network router and switch designs as a bus-bridging device between PCI / VME backplanes and proprietary ASIC data paths. Its support for the PCI (3.3 V) I/O standard at up to 33 MHz and its 24 Kbits of embedded dual-port RAM make it ideal for buffer management and protocol muxing. The 208-PQFP package also keeps the BOM cost low compared with BGA alternatives, important for cost-sensitive enterprise network gear. Designers typically pair the EP1K30 with a PHY or switch ASIC for full line-card functionality.
추천
Glue-Logic Replacement & ASIC Prototyping
The EP1K30QC208-3N serves as a drop-in programmable replacement for legacy discrete 74LS / 74F glue-logic packages, consolidating dozens of small MSI parts into a single device. Its 1,728 logic elements typically replace 50-100 standard SSI/MSI packages, simplifying PCB routing and improving signal integrity by eliminating long point-to-point traces. The 6 EABs also provide 24 Kbits of distributed memory for small LUT tables used in protocol decoding. Engineers also use the part as an ASIC prototype target before committing to a masked gate-array spin.
추천
Military & Aerospace Avionics Interfaces
Although not formally MIL-PRF-38535 qualified, the EP1K30QC208-3N is used in commercial-off-the-shelf (COTS) avionics and military systems for non-critical functions such as display controllers, navigation-data formatting, and discrete I/O expansion. Its industrial temperature grade, lead-free construction, and 147 I/O pins provide enough margin for ruggedized enclosures. Long-lifecycle programs often rely on last-time-buy stock of this part rather than redesign. Designers should perform their own reliability analysis before deploying in flight-critical paths.
추천
Medical Diagnostic Equipment I/O Controllers
In medical diagnostic equipment such as ultrasound carts, patient monitors, and lab analyzers, the EP1K30QC208-3N functions as a front-panel I/O controller, managing push-buttons, rotary encoders, LCD displays, and serial-port fan-out. Its 5 V tolerant I/O simplifies interface to legacy medical sensors, and the 24 Kbits of on-chip RAM handle small waveform buffers. The 208-PQFP package is preferred by medical OEMs for ease of rework during field service. Lifecycle alignment with long medical product cycles makes the EP1K30 a natural fit.
추천
추천 제품 요약
엔지니어링 참조 데이터: EP1K30QC208-3N — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EP1K30QC208-2N | EP1K30QC208-1N | EP1K30QC208-3 | EP1K30QC208-2 |
|---|---|---|---|---|---|
| Package | 208-PQFP | 208-PQFP | 208-PQFP | 208-PQFP | 208-PQFP |
| Brand | Altera / Intel | Altera / Intel | Altera / Intel | Altera / Intel | Altera / Intel |
| Family | ACEX-1K | ACEX-1K | ACEX-1K | ACEX-1K | ACEX-1K |
| Logic Elements | 1,728 | 1,728 | 1,728 | 1,728 | 1,728 |
| Speed Grade | -3 (fastest) | -2 | -1 | -3 | -2 |
| Operating Temperature | Industrial (N suffix) | Industrial (N suffix) | Industrial (N suffix) | Commercial | Commercial |
| Plating / RoHS | Pb-free / RoHS | Pb-free / RoHS | Pb-free / RoHS | Tin-lead | Tin-lead |
| User I/O Pins | 147 | 147 | 147 | 147 | 147 |
| Embedded Array Blocks | 6 (24 Kbit RAM) | 6 (24 Kbit RAM) | 6 (24 Kbit RAM) | 6 (24 Kbit RAM) | 6 (24 Kbit RAM) |
주요 차별점
- Fastest speed grade in ACEX-1K PQFP family (vs EP1K30QC208-2N)
- Industrial temperature with RoHS Pb-free plating (vs EP1K30QC208-3 (non-N))
- 208-PQFP footprint with 147 user I/O pins (vs EP1K30FC256-3 (256-FBGA))
설계 노트
The EP1K30QC208-3N requires two separate supply rails: VCCINT = 2.5 V for the core logic and VCCIO = 3.3 V for the I/O banks. Place a 0.1 µF decoupling capacitor as close as possible to every VCCINT and VCCIO pin, with bulk 10 µF tantalum or ceramic capacitors at each supply plane entry. Failure to keep the two rails independent can cause latch-up or permanent damage. According to the ACEX-1K datasheet, the I/O banks can be configured for 5 V tolerance but the VCCIO rail must still be set to 3.3 V.
The 208-PQFP package has 0.5 mm lead pitch and gull-wing leads; provide at least 0.5 mm of pad-to-trace clearance for proper solder fillet formation. Use a 4-layer PCB with continuous power and ground planes directly under the device for controlled impedance and EMI suppression. Avoid running high-speed traces beneath the PQFP leads - route them on the opposite side or use buried vias. Keep configuration EEPROM traces short and add 4.7 kΩ pull-ups on JTAG TMS and TDI lines per IEEE 1149.1.
Estimated: configuration bitstream size for the EP1K30QC208-3N is approximately 0.6 Mbit when fully utilized; designers should select a configuration EPROM (e.g., EPC2, EPC4, or EPC8) with at least 2× this capacity to allow future design revisions. Do not hot-swap the FPGA without proper power sequencing - the JTAG TAP controller state may latch up if VCCINT rises before VCCIO. For new designs, consider migrating to the EP1K100QC208-3N (same package, 100K gates) for additional logic headroom.
규정 준수 정보
RoHS-compliant Pb-free plating confirmed per DigiKey product listing. The N-suffix is required for industrial temperature. Halogen-free status not explicitly stated in the provided data; left as unknown. AEC-Q100 not applicable - this is a commercial/industrial FPGA.
