EP3C16Q240C8N - Cyclone III FPGA 15K LEs PQFP-240 | Altera
부품 번호: EP3C16Q240C8N ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $42.5 | $42.50 |
| 10 | $39.8 | $398.00 |
| 100 | $36.2 | $3,620.00 |
| 500 | $33.4 | $16,700.00 |
| 1,000 | $30.9 | $30,900.00 |
EP3C16Q240C8N 개요
A field-programmable gate array (FPGA) is a semiconductor device containing a fabric of programmable logic blocks, routing resources, and embedded memory that designers configure in the field using HDL languages such as Verilog and VHDL. In the semiconductor hierarchy, the FPGA sits above fixed-function ASICs and ASSPs in flexibility, and the Cyclone III family targets the low-cost, low-power segment of that market.
Key features of the EP3C16Q240C8N include 15,408 LEs organized as approximately 1,920 adaptive logic modules (ALMs), 516,096 bits (63 kbytes) of M9K embedded memory blocks, and up to 160 maximum user I/O including dedicated clock inputs. The M9K blocks support single- and dual-port operation with byte enables and initialization files, making FIFOs and line buffers easy to implement without external SRAM.
Technically, the Cyclone III architecture uses 8-input fracturable look-up tables, a hierarchical multi-track interconnect, and a phase-locked-loop (PLL)-based clock network for on-chip frequency synthesis and jitter reduction. Configuration is supported through active serial (AS), passive serial (PS), and JTAG schemes, allowing standard EPCS serial configuration devices to load the bitstream at power-up. The Q240 package supports a maximum I/O count that may be reduced depending on the selected configuration scheme, per the Altera device package information data sheet.
Typical applications include industrial motor-control and automation interfaces, video and image processing line cards, communications protocol bridging, and test/measurement glue logic. The 160-I/O budget and 65-nm low static power make it well suited to cost-sensitive volume products that do not need high-end transceivers.
Design consideration: the PQFP-240 footprint is large and hand-solderable for prototypes, but its peripheral I/O ring limits signal counts versus BGA alternatives; plan I/O banking carefully to avoid mixing incompatible voltage standards on one bank.
This page synthesizes verified distributor stock, drop-in same-package alternatives, pricing context, and practical design notes not found in the manufacturer datasheet.
드롭인 대체품: EP3C16Q240C8N — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EP3C16Q240C8N (동일 폼 팩터 및 풋프린트) — 차이점: Package, Speed Grade, Process Technology, Embedded 18x18 Multipliers, Logic Elements.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EP3C16Q240C7N
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
EP3C25Q240C8N
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$160.4667 / 개
데이터시트 보기 →EP3C10Q240C8N
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
EP3C5Q240C8N
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
EP3C16Q240I7N
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
EP3C16Q240C8N 최대 정격 & 전기적 특성
| Family | Cyclone III |
| Logic Elements (LEs) | 15408 |
| Embedded Memory (bits) | 516096 |
| Maximum User I/O | 160 |
| 패키지 | 240-BFQFP (PQFP-240, 32x32 mm) |
| Speed Grade | 8 |
| Process Technology | 65 nm |
| Temperature Grade | Commercial (C) |
| 실장 유형 | Surface Mount |
| Configuration Schemes | AS, PS, JTAG |
| Embedded Memory Blocks | M9K blocks |
| Total Memory Bits | 516096 bits (~63 kbytes) |
| Manufacturer Part Status | Active |
EP3C16Q240C8N 240-bfqfp (pqfp-240, 32x32 mm) 핀 구성 가이드
EP3C16Q240C8N(240-bfqfp (pqfp-240, 32x32 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EP3C16Q240C8N.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EP3C16Q240C8N 적합 용도: 6 애플리케이션s: Industrial Automation and Motor Control, Video and Image Processing, Communications Protocol Bridging, Test and Measurement Instrumentation, Medical Device Digital Logic, Security and Surveillance Systems.
Industrial Automation and Motor Control
The EP3C16Q240C8N fits industrial automation because its 15,408 logic elements implement PWM generators, quadrature encoder interfaces, and multi-axis interlocks with deterministic timing that microcontrollers cannot match. Its 160 user I/O accommodate parallel fieldbus transceivers, isolated inputs, and encoder banks from the single Q240 package, while 516,096 bits of M9K memory buffer command queues and recipe tables without external SRAM. Designers typically pair it with gate drivers and current-sense ADCs on the same board, using the internal PLL to derive tightly phased PWM carriers. The 65-nm fabric keeps static power low for fanless cabinets, and the peripheral PQFP I/O ring simplifies replacement in legacy through-hole-style industrial boards.
추천
Video and Image Processing
For video pipelines, the EP3C16Q240C8N provides enough fabric to implement color-space conversion, scaling, deinterlacing, and test-pattern generation, while the 516,096-bit M9K memory array holds multi-line buffers needed for horizontal filtering and scan conversion at SD and early HD resolutions. Up to 160 user I/O support parallel BT.656/BT.1120 video buses, camera link style parallel interfaces, and sync generation, with clock networks and PLLs cleaning up pixel-clock jitter. The Q240 peripheral package eases length-matched routing of parallel video buses compared with fine-pitch BGAs. For higher-resolution multi-stream designs requiring serialization, designers migrate up the Cyclone family, but for cost-sensitive display controllers this device hits the capacity and memory balance.
추천
Communications Protocol Bridging
The EP3C16Q240C8N serves as a protocol bridge between legacy parallel buses (PCI-style local buses, microprocessor memory maps, backplane interfaces) and modern serial peripherals, using its 15,408 LEs for FIFOs, address decoders, and packet framing logic. The M9K memory blocks implement elastic buffers that absorb clock-domain differences between two interfaces, and multiple PLLs generate independent clocks for each domain. With 160 I/O, a single device can terminate two wide parallel buses simultaneously. The commercial temperature PQFP-240 package suits telecom rack cards and network appliances with controlled environments, and JTAG configuration simplifies field firmware updates of the bridge personality during manufacturing and service.
추천
Test and Measurement Instrumentation
In bench and production test equipment, the EP3C16Q240C8N implements timing generators, edge counters, pattern generators, and acquisition state machines with sub-10-ns determinism. The 15,408-LE fabric holds channel serialization logic for multi-channel digital acquisition, while M9K blocks capture triggered waveform segments of up to tens of kilobytes per channel internally before offload. Its PLLs synthesize sample clocks from a single reference, and the 160 user I/O interface ADC parallel buses, relay control arrays, and front-panel indicators from one package. The PQFP-240 leads simplify prototype rework during instrument bring-up, and JTAG-based configuration lets engineering teams iterate FPGA personalities without socketing parts.
추천
Medical Device Digital Logic
Portable and benchtop medical devices use the EP3C16Q240C8N for sensor interfacing, digital filtering, and display control, exploiting the low static power of the 65-nm process for battery-operated designs. The 15,408 LEs implement FIR and decimation filters for physiological signals, and the 516,096-bit M9K memory buffers patient-data frames for transfer to a host processor. Its deterministic fabric avoids software-timing hazards in safety-relevant paths, complementing a supervising MCU. The commercial-grade PQFP-240 suits patient-adjacent equipment used in controlled clinic environments; designs requiring industrial temperature span should select the Q240 industrial variant. Compliance-driven teams value the long lifecycle and stable, documented bitstream tooling.
추천
Security and Surveillance Systems
The EP3C16Q240C8N acts as the video front-end engine in surveillance equipment, performing sensor-interface deserialization, exposure control, motion detection pre-processing, and OSD overlay generation. Its 160 user I/O connect CMOS sensor parallel interfaces and panel drivers, while the M9K blocks hold reference frames for motion-block comparison at CIF/VGA resolutions. The 15,408-LE fabric leaves room for UART/SPI control bridges to system processors and for crypto-lite watermarking logic. Low static power suits always-on recording devices, and the PQFP-240 package tolerates the thermal profile of sealed camera enclosures in commercial installations. For analytics-heavy multi-sensor NVRs, designers step up in logic density rather than change architecture.
추천
추천 제품 요약
엔지니어링 참조 데이터: EP3C16Q240C8N — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EP3C16Q240C7N | EP3C25Q240C8N | EP3C10Q240C8N | EP3C5Q240C8N | EP3C16Q240I7N |
|---|---|---|---|---|---|---|
| Package | 240-BFQFP (PQFP-240, 32x32 mm) | 240-BFQFP - same footprint | 240-BFQFP - same footprint | 240-BFQFP - same footprint | 240-BFQFP - same footprint | 240-BFQFP - same footprint |
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Speed Grade | 8 | 7 (faster) | 8 | 8 | 8 | 7 (faster) |
| Temperature Grade | Commercial (C) | Commercial | Commercial | Commercial | Commercial | Industrial (I) |
| Configuration Support | AS, PS, JTAG | AS, PS, JTAG | AS, PS, JTAG | AS, PS, JTAG | AS, PS, JTAG | AS, PS, JTAG |
주요 차별점
- Largest logic capacity in Q240 footprint (vs EP3C10Q240C8N)
- Cost-optimized speed grade (vs EP3C16Q240C7N)
- Commercial grade economics (vs EP3C16Q240I7N)
- Hand-assembly-friendly package (vs BGA-packaged Cyclone devices)
설계 노트
Cyclone III devices require sequenced core and I/O supply rails; follow the Altera power play early estimator to size regulators using your actual LE toggling rates rather than worst-case numbers. Estimated: with 15,408 LEs at moderate utilization and 65-nm core silicon, core current is typically well under 1 A, but I/O rail current scales directly with the number of simultaneously switching outputs and load capacitance - budget 10 mA per actively switching I/O with 15 pF load as a planning figure and verify with the PowerPlay estimator before finalizing the DC-DC converter selection.
The PQFP-240 has a 0.5 mm pin pitch requiring careful solder-paste stencil design; use a 1:1 aperture with additional thermal relief on corner pins to prevent tombstoning during reflow. Assign decoupling capacitors (mix of 0.1 uF and 10 uF ceramics) within 5 mm of the supply pins on the QFP perimeter, one pair per bank. Keep the JTAG chain (TDI/TMS/TCK/TDO) routed with series 33-ohm resistors near the connector to damp reflections during in-system programming.
Do not assume all 160 maximum I/O are available: per the Altera package data sheet, the usable count depends on your configuration scheme (AS pins, PS pins, and dedicated configuration pins are consumed differently) and on voltage-bank assignments. Mixing 3.3 V and 2.5 V standards requires careful bank planning done BEFORE routing, because PQFP banks are fixed to physical pin groups. Finally, remember that grade 8 timing closures are slower than grade 7 - if static timing fails at 100 MHz+ on grade 8, the drop-in EP3C16Q240C7N resolves it without a board change.
규정 준수 정보
Compliance status was not stated in the provided verified web data; verify against the Intel/Altera product page and material declaration reports before shipping to restricted markets.
