EP3C40F484C7N - Cyclone III FPGA, 39.6K LE, 484-FBGA | Intel
부품 번호: EP3C40F484C7N ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $364.19 | $364.19 |
| 10 | $339.5 | $3,395.00 |
| 100 | $312 | $31,200.00 |
| 500 | $285 | $142,500.00 |
| 1,000 | $264 | $264,000.00 |
EP3C40F484C7N 개요
A Field-Programmable Gate Array (FPGA) is a programmable logic device containing an array of configurable logic blocks (CLBs), programmable interconnects, and dedicated hard IP such as block RAM, multipliers, and I/O serdes. FPGAs sit at the top of the programmable-logic hierarchy, above CPLDs and below ASICs in terms of integration density, and they belong to the broader integrated-circuit / semiconductor category. Unlike microcontrollers, FPGAs implement logic in hardware gates, which provides deterministic timing and parallel execution suitable for high-throughput DSP, video bridging, and custom interface glue.
Key features of the EP3C40F484C7N include 4 embedded PLL clock managers, 126 embedded 18x18 multipliers for DSP, and support for multiple I/O standards including LVDS, LVTTL, LVCMOS, SSTL, and PCI. The 484-FBGA package offers a 1.0 mm ball pitch and an exposed-die thermal management approach, supporting up to 331 user I/Os that allow dense parallel bus implementations. Cyclone III devices also embed configuration memory and a dedicated JTAG configuration interface, eliminating the need for external configuration PROMs in most designs.
The Cyclone III architecture combines an SRAM-based logic fabric with hard DSP blocks and dedicated memory, allowing engineers to implement custom pipelines, bus bridges, motor-control loops, and video processing functions. Compared with earlier Cyclone II devices, Cyclone III reduces dynamic power by approximately 50 percent and adds true LVDS support on more pins, enabling low-cost industrial, consumer, and automotive infotainment designs.
Typical applications for the EP3C40F484C7N include motor control and drive, industrial machine vision, video-format conversion (HDMI/DVI/VGA bridging), software-defined radio front ends, low-cost ASIC prototyping, and LED video-wall controllers. The combination of moderate logic density, abundant block RAM, and a high pin count makes it well suited for parallel video pipelines and embedded control boards.
When designing with this device, pay attention to power sequencing for the core (VCCINT) and I/O (VCCIO) rails, and use the dedicated JTAG or Active Serial configuration scheme. Because the configuration memory is SRAM-based, designs that must retain logic across power cycles should use a Cyclone III-compatible configuration device (EPCS) or a soft-processor bootloader.
This page synthesizes distributor pricing, drop-in alternatives from the Cyclone III and Cyclone IV families, and practical design notes not found in the manufacturer datasheet alone.
드롭인 대체품: EP3C40F484C7N — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EP3C40F484C7N (동일 폼 팩터 및 풋프린트) — 차이점: Package, Process Technology, Operating Temperature, Speed Grade, RoHS Status.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EP3C40F484C6N
✅ 드롭인✓ 재고 있음
$312.4 / 개
데이터시트 보기 →EP3C40F484I7N
✅ 드롭인✓ 재고 있음
$118.5 / 개
데이터시트 보기 →EP3C55F484C7N
✅ 드롭인✓ 재고 있음
$52.75 / 개
데이터시트 보기 →EP3C25F484C7N
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
EP3C16F484C7N
✅ 드롭인✓ 재고 있음
$30.1 / 개
데이터시트 보기 →EP3C40F484C7N 최대 정격 & 전기적 특성
| Device Family | Cyclone III |
| Logic Elements | 39,600 |
| Total Memory Bits | 1,161,216 |
| Embedded 18x18 Multipliers | 126 |
| PLLs | 4 |
| Global Clock Networks | 20 |
| User I/Os | 331 |
| 패키지 | 484-FBGA (F484), 1.0 mm pitch |
| Process Technology | 65 nm low-power |
| Configuration Memory | SRAM-based |
| 동작 온도 | 0C to +85C (commercial, C7 speed grade) |
| I/O Standards Supported | LVDS, LVTTL, LVCMOS, SSTL, PCI |
| 실장 유형 | Surface Mount |
| MSL 레벨 | 3 |
| RoHS 상태 | Compliant (lead-free FBGA) |
EP3C40F484C7N 핀 구성
| 핀 BGA-1 | I/O Bank 1 — User I/O - refer to Cyclone III pin connection guidelines for ball map |
| 핀 BGA-2 | I/O Bank 1 — User I/O |
| 핀 BGA-3 | VCCIO1 — I/O bank 1 supply voltage |
| 핀 BGA-4 | GND — Ground reference |
| 핀 BGA-5 | I/O Bank 2 — User I/O |
| 핀 BGA-6 | I/O Bank 2 — User I/O |
| 핀 BGA-7 | VCCINT — Core supply voltage (1.2 V nominal) |
| 핀 BGA-8 | GND — Ground reference |
| 핀 BGA-9 | TCK — JTAG test clock |
| 핀 BGA-10 | TMS — JTAG test mode select |
| 핀 BGA-11 | TDI — JTAG test data in |
| 핀 BGA-12 | TDO — JTAG test data out |
| 핀 BGA-13 | nCONFIG — Configuration control (active low) |
| 핀 BGA-14 | nSTATUS — Configuration status (active low) |
| 핀 BGA-15 | CONF_DONE — Configuration done indicator |
| 핀 BGA-16 | MSEL0 — Configuration mode select bit 0 |
| 핀 BGA-17 | MSEL1 — Configuration mode select bit 1 |
| 핀 BGA-18 | MSEL2 — Configuration mode select bit 2 |
| 핀 BGA-19 | DCLK — Configuration clock input |
| 핀 BGA-20 | DATA0 — Configuration data input bit 0 |
| 핀 BGA-21 | nCE — Chip enable (active low) |
| 핀 BGA-22 | nCEO — Chip enable out for daisy chain |
| 핀 BGA-23 | VCCA_PLL1 — PLL 1 analog supply |
| 핀 BGA-24 | VCCD_PLL1 — PLL 1 digital supply |
| 핀 BGA-25 | GNDA_PLL1 — PLL 1 analog ground |
일반적인 애플리케이션
EP3C40F484C7N 적합 용도: 6 애플리케이션s: Industrial Motor Control and Drive, Industrial Machine Vision and Video Bridging, LED Video-Wall and Display Controllers, Custom ASIC Prototyping and Emulation, Software-Defined Radio Front End, Embedded Control and Industrial Networking.
Industrial Motor Control and Drive
The EP3C40F484C7N fits industrial motor control because its 126 embedded 18x18 multipliers and 4 PLLs can sample current and position feedback at high PWM rates while running vector-control or field-oriented control loops in hardware. The 331 user I/Os handle three-phase gate-driver signals, encoder inputs, and CAN/RS-485 comms without external bus expanders, and the 65 nm low-power process keeps the FPGA cooler than older Cyclone II designs in sealed IPM enclosures.
추천
Industrial Machine Vision and Video Bridging
The EP3C40F484C7N is well suited to machine-vision pipelines because its 1,161 Kbits of block RAM buffer full-HD lines, and 126 multipliers perform real-time Bayer demosaic, color-space conversion, and edge detection. The 331 user I/Os accept parallel Camera Link or HDMI/DVI/VGA inputs, and the LVDS I/O capability drives long-distance flat-panel cables. Designers can use the same FPGA as a frame-buffer bridge between image sensors and ARM SoCs.
추천
LED Video-Wall and Display Controllers
The EP3C40F484C7N drives LED video walls because its 331 LVDS-capable I/Os can source large parallel data buses to scan-multiplexed panels, while 126 multipliers handle gamma correction and brightness uniformity in real time. The 4 PLLs synthesize many pixel-clock derivatives from a single reference, eliminating external clock generators. Designers use block RAM for frame buffering, reducing external SDRAM requirements on compact controllers.
추천
Custom ASIC Prototyping and Emulation
The EP3C40F484C7N enables ASIC prototyping because 39,600 logic elements, 126 multipliers, and 1,161 Kbits of block RAM let engineers map meaningful sub-blocks of a target ASIC for real-world verification at near-final clock speeds. Four PLLs generate multiple clock domains, allowing source-synchronous interfaces to be emulated. Quartus Prime delivers HDL synthesis and TimeQuest timing analysis to validate paths before tape-out.
추천
Software-Defined Radio Front End
The EP3C40F484C7N supports SDR front ends because 126 18x18 multipliers implement high-rate digital down-conversion and channelization, and 1,161 Kbits of block RAM hold sample buffers between DSP stages. Four PLLs derive sampling clocks from a low-frequency reference, and LVDS I/Os interface to high-speed ADCs and DACs. The 65 nm low-power process allows deployment in portable or vehicle-mounted radio platforms.
추천
Embedded Control and Industrial Networking
The EP3C40F484C7N is a strong fit for embedded industrial control because 331 user I/Os implement EtherCAT, PROFINET, or Modbus field-bus interfaces alongside legacy parallel buses, and 39,600 logic elements run soft-CPU cores such as Nios II alongside deterministic hardware state machines. Industrial protocols benefit from low-latency hardware accelerators in FPGA fabric, and SRAM-based configuration allows field firmware updates over JTAG.
추천
추천 제품 요약
엔지니어링 참조 데이터: EP3C40F484C7N — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EP3C40F484C6N | EP3C40F484I7N | EP3C55F484C7N | EP3C25F484C7N | EP3C16F484C7N |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | FBGA-484 (F484) | FBGA-484 (F484) - same | FBGA-484 (F484) - same | FBGA-484 (F484) - same | FBGA-484 (F484) - same | FBGA-484 (F484) - same |
| Logic Elements | 39,600 | 39,600 | 39,600 | 55,856 (+41%) | 24,624 (-38%) | 15,408 (-61%) |
| Total Memory Bits | 1,161,216 | 1,161,216 | 1,161,216 | 2,340,000 (+101%) | 608,256 (-48%) | 516,096 (-56%) |
| Embedded 18x18 Multipliers | 126 | 126 | 126 | 156 | 66 | 56 |
| User I/Os | 331 | 331 | 331 | 327 | 195 | 346 |
| Speed Grade | C7 | C6 | I7 | C7 | C7 | C7 |
| Operating Temperature | 0C to +85C | 0C to +85C | -40C to +100C (industrial) | 0C to +85C | 0C to +85C | 0C to +85C |
주요 차별점
- Higher logic density than Cyclone II in the same footprint (vs EP2C40F484C7N (Cyclone II predecessor))
- Pin-to-pin logic upgrade in same F484 footprint (vs EP3C25F484C7N)
- Faster speed grade than C6 variant in identical silicon (vs EP3C40F484C6N)
설계 노트
Cyclone III devices require separate VCCINT (1.2 V core), VCCIO (per bank, 1.2 V-3.3 V depending on I/O standard), and PLL analog supplies. Power-on reset requires VCCINT to ramp before VCCIO to avoid I/O-driving-before-core-ready latch-up; follow the Cyclone III power-sequencing diagram in the handbook. Use the PowerPlay Early Power Estimator spreadsheet to budget rails before laying out the PCB.
The 484-FBGA package uses a 1.0 mm ball pitch; PCB layout requires laser-drilled micro-vias or via-in-pad for signal escape routing. Decoupling caps must be placed within 100 mils of each VCCINT and VCCIO ball, and the exposed-die pad (thermal pad) must be soldered to a continuous ground pour to keep theta-JA within rated limits.
Because configuration memory is SRAM-based, EP3C40F484C7N loses logic on power-down. Designs that must retain logic across power cycles should add an Altera EPCS configuration flash and route MSEL[2:0] for Active Serial mode. For JTAG-only programming, set MSEL[2:0]=000 for JTAG-only and ensure nCONFIG is pulled high through a 10 kohm resistor.
LVDS signaling on Cyclone III I/O requires a 100-ohm differential termination resistor between the P and N pins at the receiver. Source-synchronous interfaces such as DDR memory benefit from phase-shifted PLL outputs to center the data-eye; consult AN 507 for DDR/SDRAM interface timing.
규정 준수 정보
Lead-free FBGA-484 package is RoHS compliant per Intel product marking. Not AEC-Q100 qualified (commercial 0C to +85C only); for AEC-Q100 use a different Intel FPGA family. Halogen-free status not explicitly listed in the verified distributor data.
