EP3C40F484I7N - Cyclone III FPGA, 39.6K LE, 484-FBGA | Intel / Altera
부품 번호: EP3C40F484I7N ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $168.5 | $168.50 |
| 10 | $152 | $1,520.00 |
| 100 | $138.25 | $13,825.00 |
| 500 | $126.8 | $63,400.00 |
| 1,000 | $118.5 | $118,500.00 |
EP3C40F484I7N 개요
What is a Cyclone III FPGA? The Cyclone III family is a low-power, low-cost SRAM-based programmable logic family from Altera (now Intel FPGA) that sits in the broader hierarchy of programmable logic devices (PLD) between simple CPLDs and high-performance FPGAs such as Stratix. Cyclone III devices are built on a TSMC 65 nm low-power process and integrate logic, multipliers, memory, PLLs, and high-speed I/O into a single device, making them suitable for I/O expansion, glue-logic replacement, parallel DSP, and mid-density state-machine designs.
Key features of the EP3C40F484I7N include 4 PLLs, 331 user I/O pins distributed across 8 banks, 1.161 Mbit of RAM, and full industrial temperature range support from -40 °C to +125 °C (the I7N speed/temperature grade). The device supports up to 1 Gbps LVDS with external serializer/deserializer logic, provides 2.5 Gbps external memory interfaces, and includes dedicated DDR/DDR2/QDRII memory controller hard IP. Configuration is supported through passive serial (AS), active serial (AP), JTAG, and Fast Passive Parallel modes using industry-standard Altera/Intel EPCS or EPCQ configuration flash devices.
Typical applications for the EP3C40F484I7N span industrial motor control, video processing and image aggregation, automotive infotainment controllers, software-defined radio baseband, low-density ASIC prototyping, and consumer display controllers. The 484-FBGA package offers 1.0 mm ball pitch and excellent signal integrity for high-speed LVDS and DDR2 interfaces, while the industrial temperature grade suits factory automation and outdoor deployments.
When designing with this device, ensure proper decoupling (100 nF + 10 µF bulk per bank) and follow Intel's Cyclone III pin connection guidelines for unused pins. Configuration flash selection is critical — pair with an EPCS16 or EPCQ16 for typical 39.6 K LE designs. The QFP-484 BGA requires X-ray inspection in production, so design for manufacturability with clear pad geometry.
드롭인 대체품: EP3C40F484I7N — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EP3C40F484I7N (동일 폼 팩터 및 풋프린트) — 차이점: Package, Process Technology, Operating Temperature, Speed Grade, RoHS Status.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EP3C40F484I7
✅ 드롭인✓ 재고 있음
$65 / 개
데이터시트 보기 →EP3C40F484C7N
✅ 드롭인✓ 재고 있음
$264 / 개
데이터시트 보기 →EP3C40F484C8N
✅ 드롭인✓ 재고 있음
$21.4 / 개
데이터시트 보기 →EP3C40F484C8
✅ 드롭인✓ 재고 있음
$88.1 / 개
데이터시트 보기 →EP3C40F484I7N 최대 정격 & 전기적 특성
| Series | Cyclone III |
| Family | Cyclone® III |
| Manufacturer | Intel (formerly Altera) |
| Logic Elements (LE) | 39,600 |
| Logic Array Blocks (LAB) | 2,475 |
| Embedded Memory (bits) | 1,161,216 |
| Embedded Multipliers (18x18) | 126 |
| User I/O Pins | 331 |
| PLLs | 4 |
| Global Clock Networks | 20 |
| Core Voltage | 1.2 V |
| I/O Banks | 8 |
| 동작 온도 | -40 °C to +125 °C (Industrial) |
| 패키지 | 484-ball FBGA, 1.0 mm pitch (F484) |
| Speed Grade | 7 (fast) |
| Process Technology | TSMC 65 nm low-power |
| Configuration | AS / AP / PS / FPP / JTAG |
| RoHS 상태 | Compliant |
EP3C40F484I7N 핀 구성
| 핀 A1 | IO — General purpose user I/O (bank 1) |
| 핀 A2 | IO — General purpose user I/O (bank 1) |
| 핀 AB1 | IO — General purpose user I/O (bank 8) |
| 핀 AB2 | IO — General purpose user I/O (bank 8) |
| 핀 F3 | VCCINT — Core supply voltage (1.2 V) |
| 핀 F4 | VCCIO1 — I/O bank 1 supply voltage |
| 핀 GND1 | GND — Ground reference |
| 핀 VREFB1N0 | VREF — Reference voltage for bank 1 |
| 핀 TCK | TCK — JTAG clock input |
| 핀 TMS | TMS — JTAG mode select |
| 핀 TDI | TDI — JTAG data input |
| 핀 TDO | TDO — JTAG data output |
일반적인 애플리케이션
EP3C40F484I7N 적합 용도: 6 애플리케이션s: Industrial Motor Control, Video Processing and Image Aggregation, Automotive Infotainment Controller, Software-Defined Radio Baseband, ASIC Prototyping and Emulation, Industrial Communication Gateway.
Industrial Motor Control
The EP3C40F484I7N is well suited to industrial motor control applications requiring multiple PWM channels, encoder interfaces, and safety logic. Its 126 embedded 18x18 multipliers enable field-oriented control (FOC) algorithms with 16-bit fixed-point math running at over 100 MHz, while the 4 integrated PLLs provide independent clocks for ADC sampling, PWM generation, and communication interfaces. The industrial -40 °C to +125 °C temperature grade ensures reliable operation in factory environments. With 331 user I/Os across 8 banks, designers can interface directly to 3-phase gate drivers, Hall-effect sensors, incremental encoders, and isolated communication ports without external logic. Cyclone III's deterministic timing and IEEE 1149.1 JTAG support also simplify regulatory certification for industrial drives.
추천
Video Processing and Image Aggregation
The EP3C40F484I7N's 1.161 Mbit of embedded M9K memory and 39,600 logic elements make it ideal for mid-resolution video processing applications such as multi-camera aggregation, video scaling, and on-screen display (OSD) overlay. The 8 I/O banks support LVDS at up to 1 Gbps and dedicated external memory interfaces to DDR2-800, allowing direct connection to external frame buffers. Designers can implement ITU-R BT.656, BT.1120, or HDMI input/output bridges with enough logic headroom for color space conversion and motion-adaptive deinterlacing. The 65 nm low-power process also keeps thermal dissipation low, allowing fanless operation in sealed video wall and digital signage enclosures. Quartus II's DSP Builder and Video and Image Processing (VIP) Suite provide ready-to-use IP cores that accelerate development.
추천
Automotive Infotainment Controller
The EP3C40F484I7N serves as a central infotainment controller bridging automotive MOST, CAN, and LVDS camera networks to the head unit display. The device's 4 PLLs and 20 global clock networks allow simultaneous handling of audio I²S streams, video data, and CAN/LIN bus traffic without timing conflicts. With 331 user I/Os, designers can connect to multiple camera inputs, audio codecs, and touchscreen controllers through a single chip. The industrial temperature grade handles under-dash thermal conditions, while Quartus II's Qsys system integration tool simplifies the design of complex automotive infotainment SoCs. For functional safety designs, the built-in CRC and ECC on configuration memory provide added diagnostic coverage without external components.
추천
Software-Defined Radio Baseband
The EP3C40F484I7N provides an excellent platform for software-defined radio (SDR) baseband processing in 4G/5G small cells and private LTE networks. With 126 embedded 18x18 multipliers, designers can implement up to 63 complex FFT butterflies per clock cycle, supporting 256-point FFTs in real time at 100 MHz sample rates. The high-speed LVDS I/O banks interface directly to wideband ADC/DAC front ends, while the 4 PLLs generate independent sample clocks for digital up/down conversion. Cyclone III's deterministic fabric supports low-latency, real-time DSP pipelines required for cellular PHY layer processing, and Quartus II's DSP Builder integration with MATLAB/Simulink accelerates algorithm development from simulation to silicon.
추천
ASIC Prototyping and Emulation
The EP3C40F484I7N's 39,600 logic elements and 1.161 Mbit of embedded memory make it a cost-effective platform for ASIC and SoC prototyping. Multiple EP3C40 devices can be cascaded through their high-speed LVDS I/O to emulate larger designs, providing >100K ASIC gates of equivalent capacity. Designers can validate RTL, run real-world firmware, and perform system-level testing before committing to mask production. The 4 PLLs and flexible clocking infrastructure support prototyping of designs with multiple clock domains, while JTAG-based debugging and SignalTap II logic analyzer allow deep visibility into internal signals. This dramatically reduces time-to-market for complex ASIC projects in the 50-200K gate complexity range.
추천
Industrial Communication Gateway
The EP3C40F484I7N excels as a multi-protocol industrial gateway bridging Ethernet/IP, PROFINET, EtherCAT, Modbus, and serial fieldbuses into a unified controller. The 4 PLLs generate independent clocks for Ethernet MAC operation at 100 Mbps, real-time EtherCAT slave processing, and CPU subsystem timing. With 331 user I/Os, designers can implement up to 8 isolated serial ports, multiple SPI slaves, and parallel I/O expansion in a single chip. The 126 embedded multipliers accelerate CRC checking and protocol processing, while 1.161 Mbit of block RAM provides ample buffering for packet processing. Industrial -40 °C to +125 °C operation ensures reliable deployment in factory floor cabinets and outdoor installations.
추천
추천 제품 요약
엔지니어링 참조 데이터: EP3C40F484I7N — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EP3C40F484I7 | EP3C40F484C7N | EP3C40F484C8N | EP3C40F484C8 | EP3C40F324I7N |
|---|---|---|---|---|---|---|
| Package | 484-FBGA (F484) | 484-FBGA (F484) - same | 484-FBGA (F484) - same | 484-FBGA (F484) - same | 484-FBGA (F484) - same | 324-FBGA (F324) - smaller |
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Logic Elements | 39,600 | 39,600 | 39,600 | 39,600 | 39,600 | 39,600 |
| User I/Os | 331 | 331 | 331 | 331 | 331 | 249 |
| Operating Temperature | -40°C to +125°C (Industrial) | -40°C to +125°C (Industrial) | 0°C to +85°C (Commercial) | 0°C to +85°C (Commercial) | 0°C to +85°C (Commercial) | -40°C to +125°C (Industrial) |
| Speed Grade | 7 | 7 | 7 | 8 | 8 | 7 |
| Embedded Memory (bits) | 1,161,216 | 1,161,216 | 1,161,216 | 1,161,216 | 1,161,216 | 1,161,216 |
| Embedded Multipliers (18x18) | 126 | 126 | 126 | 126 | 126 | 126 |
주요 차별점
- Industrial temperature range for harsh environment deployments (vs EP3C40F484C8N)
- Higher pin count and larger package for maximum I/O connectivity (vs EP3C40F324I7N)
- Established long-term supply for industrial and military programs (vs Lattice ECP3 (LFE3-70EA-8FN484C))
설계 노트
The EP3C40F484I7N requires a 1.2 V core supply (VCCINT) and per-bank I/O supplies (VCCIO). Decoupling must include 100 nF ceramic capacitors near every VCCINT pin plus 10 µF bulk capacitors distributed across the PCB. Power sequencing is not required, but VCCIO banks must be powered before or simultaneously with VCCINT to prevent latch-up. Use Intel's PowerPlay Early Power Estimator (EPE) spreadsheet to estimate consumption before PCB layout, as 39.6 K LEs with high utilization can exceed 1.5 W.
The 484-FBGA package has a typical θJA of 18 °C/W with adequate airflow. For designs in sealed industrial enclosures, derate the operating temperature by 5-10 °C to account for ambient heating. The device's industrial -40 °C to +125 °C junction temperature range allows fanless operation at typical utilization but may require thermal vias under the BGA and a copper pour on inner layers for full-power 1.2 V core operation. Refer to the Cyclone III handbook chapter on thermal management for design guidelines.
The 484-FBGA with 1.0 mm pitch requires 0.5 mm diameter solder balls and 0.6 mm diameter PCB pads. Use a 4-layer PCB at minimum with continuous GND and VCCINT planes directly under the BGA. BGA breakout should use dog-bone fanout or via-in-pad for the inner rows. Solder paste stencil of 0.125 mm thickness with apertures 0.4-0.45 mm diameter is recommended. X-ray inspection after reflow is essential to verify solder joint integrity, especially for prototypes.
Select the configuration mode carefully. Active Serial (AS) mode with an EPCS16 or EPCQ32 flash is the most common for production. JTAG mode is required for prototyping and SignalTap II debugging. Fast Passive Parallel (FPP) with an external microcontroller enables multi-image configuration for safety-critical or remote-update applications. The nCONFIG, nSTATUS, and CONF_DONE pins must be pulled up to 3.3 V (VCCIO of the configuration bank) per the Cyclone III handbook pin connection guidelines.
규정 준수 정보
RoHS compliant per Intel/Altera product page. Lead-free 484-FBGA package. Not AEC-Q100 qualified (industrial grade only); for AEC-Q100 automotive designs consult Intel automotive product line.
