EP4CE75F29C7N - 75K LE Cyclone IV E FPGA, 780-BGA | Altera
부품 번호: EP4CE75F29C7N ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $254.49 | $254.49 |
| 10 | $229.04 | $2,290.40 |
| 100 | $203.59 | $20,359.00 |
| 500 | $178.15 | $89,075.00 |
| 1,000 | $152.7 | $152,700.00 |
EP4CE75F29C7N 개요
An FPGA (Field-Programmable Gate Array) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnects, and embedded memory and DSP resources that designers can program after manufacture to implement custom digital logic. Within the broader taxonomy, the EP4CE75F29C7N sits in the low-cost, low-power tier of Altera/Intel FPGAs (Cyclone IV E), positioned between the older Cyclone III family and the newer Cyclone V / Cyclone 10 LP families, and serves as a programmable alternative to ASICs and ASSPs for moderate-density glue-logic, control, and signal-processing tasks.
Key features of the EP4CE75F29C7N include 4 input LUTs per logic element, M9K embedded memory blocks totaling 2.81 Mbits, embedded 18x18 multipliers for DSP, and 20 global clock networks driven by 4 PLLs. The F29 (780-BGA) package exposes all 426 user I/Os and supports high-speed LVDS signaling on most pins. Configuration is supported through JTAG, Active Serial (AS), Passive Serial (PS), and Fast Passive Parallel (FPP) modes, with built-in decompression and encryption features for secure bitstream handling.
Typical applications span industrial motor control, video bridging and display controllers, automotive infotainment prototyping, low-cost software-defined radio (SDR) front-ends, and test & measurement front-end logic. Designers choose the Cyclone IV E family when they need a balance of logic density, embedded DSP and memory, and low static/dynamic power compared to previous-generation Cyclone devices. A typical design enters through the Altera Quartus II or Intel Quartus Prime design suite, which provides IP libraries, synthesis, place-and-route, and timing closure for this part.
Design considerations include providing a clean, low-noise 1.2 V core supply (often via a dedicated LDO), proper decoupling with 0.1 uF and bulk capacitors at every VCC pin group, and a robust JTAG chain for configuration and in-system debug. PCB layout for the 780-BGA package requires microvia or via-in-pad technology for reliable assembly, and thermal dissipation should be considered for sustained high-utilization designs operating near the top of the commercial temperature range.
This page synthesizes distributor pricing, drop-in alternatives from the Cyclone IV E family, and practical design notes not found in the manufacturer datasheet, enabling faster part selection and BOM risk mitigation.
드롭인 대체품: EP4CE75F29C7N — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EP4CE75F29C7N (동일 폼 팩터 및 풋프린트) — 차이점: Package, Speed Grade, Operating Temperature, Configuration Modes, RoHS Status.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EP4CE75F29C8N
✅ 드롭인✓ 재고 있음
$149.75 / 개
데이터시트 보기 →EP4CE75F29I7N
✅ 드롭인✓ 재고 있음
$540 / 개
데이터시트 보기 →EP4CE115F29C7N
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
EP4CE55F29C7N
✅ 드롭인✓ 재고 있음
$138 / 개
데이터시트 보기 →EP4CE40F29C7N
✅ 드롭인✓ 재고 있음
$55.85 / 개
데이터시트 보기 →EP4CE75F29C7N 최대 정격 & 전기적 특성
| Family | Cyclone IV E |
| Logic Elements (LE) | 75,408 |
| Embedded Memory (bits) | 2,810,880 |
| Memory Blocks | M9K (9 Kbit blocks) |
| Maximum User I/O | 426 |
| Embedded 18x18 Multipliers | 200 |
| General-purpose PLLs | 4 |
| Global Clock Networks | 20 |
| Process Technology | 60 nm low-power |
| Core Supply Voltage | 1.2 V |
| 패키지 | 780-ball FineLine BGA (F29), 29x29 mm |
| Speed Grade | C7 (commercial, 7th speed bin) |
| Operating Temperature (Commercial) | 0C to +85C |
| Configuration Modes | JTAG, AS, PS, FPP |
| LVDS Support | Up to 3.125 Gbps (dedicated SERDES blocks) |
| RoHS 상태 | Compliant |
| 실장 유형 | Surface Mount (BGA) |
| MSL 레벨 | 3 (per JEDEC J-STD-020) |
EP4CE75F29C7N 780-ball fineline bga (f29), 29x29 mm 핀 구성 가이드
EP4CE75F29C7N(780-ball fineline bga (f29), 29x29 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EP4CE75F29C7N.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EP4CE75F29C7N 적합 용도: 6 애플리케이션s: Industrial Motor Control and Drive, Video Bridging and Display Controllers, Automotive Infotainment Prototyping, Software-Defined Radio (SDR) Front-End, Test and Measurement Front-End Logic, Network Equipment Glue Logic and Bridging.
Industrial Motor Control and Drive
The EP4CE75F29C7N's 75,408 logic elements, 200 18x18 hardware multipliers, and 4 PLLs make it a strong fit for industrial motor control and drive systems. Its hardware DSP blocks accelerate Field-Oriented Control (FOC) and Space Vector PWM (SVPWM) math without burdening fabric logic, while the 4 PLLs generate the high-resolution PWM edge-aligned clocks demanded by IGBT/MOSFET gate drivers. The F29 780-ball BGA exposes 426 user I/Os, sufficient for multi-axis control plus encoder and resolver feedback channels. According to Altera reference designs, the Cyclone IV E family is widely deployed in servo drives, industrial pumps, and CNC controllers where deterministic real-time response is required.
추천
Video Bridging and Display Controllers
The EP4CE75F29C7N's 2,810,880 bits of M9K embedded memory, 426 user I/Os, and LVDS support up to 3.125 Gbps make it well suited for video bridging, format conversion, and display controllers. The M9K blocks can be configured as line buffers or frame stores for dual-port buffering between cameras, HDMI/DisplayPort transmitters, and LCD panels. The high I/O count enables parallel RGB, BT.656, and OpenLDI LVDS interfaces simultaneously. According to Altera reference designs, Cyclone IV E FPGAs are commonly used to bridge legacy parallel video to modern LVDS displays, perform color-space conversion (RGB to YCbCr), and generate timing controllers for TFT panels.
추천
Automotive Infotainment Prototyping
The EP4CE75F29C7N provides automotive-tier hardware prototyping capability for infotainment head units, instrument clusters, and ADAS sensor pre-processing, with the 'C' commercial speed grade suitable for development and validation before migration to the 'A' automotive variant. The 200 hardware multipliers and 2.81 Mbits of embedded memory support real-time audio DSP, image scaling, and CAN/LIN bridging without external co-processors. Its 426 user I/Os accommodate multiple LVDS camera inputs and BT.656 display outputs simultaneously. According to Altera's Cyclone IV documentation, engineers prototype with the EP4CE75 commercial part and re-spin to AEC-Q100 qualified variants for production.
추천
Software-Defined Radio (SDR) Front-End
The EP4CE75F29C7N is used as a digital front-end in low-cost SDR platforms, performing channelization, filtering, and digital down/up-conversion between analog converters and host processors. The 200 18x18 multipliers and 4 PLLs enable real-time FIR filtering and DDS-based local oscillators at IF sample rates up to 200 MSPS. Its M9K memory blocks provide data buffering and half-band filter coefficient storage. According to Altera application notes, Cyclone IV E parts are commonly deployed in ham radio transceivers, signal intelligence prototypes, and academic SDR teaching kits where cost and power matter as much as logic density.
추천
Test and Measurement Front-End Logic
The EP4CE75F29C7N's combination of high I/O count (426 pins), embedded memory (2.81 Mbits), and 200 hardware multipliers suits test & measurement front-end logic including pattern generation, signal capture, and protocol decoding. Engineers implement state machines, custom protocol bridges, and real-time DSP filters without resorting to a more expensive mid-range FPGA. Its JTAG, AS, PS, and FPP configuration modes support both factory programming and in-system field updates. According to Altera reference designs, Cyclone IV E parts power logic analyzers, protocol analyzers, and bench-top instrumentation front-ends.
추천
Network Equipment Glue Logic and Bridging
The EP4CE75F29C7N is commonly deployed in networking equipment as glue logic between Ethernet PHYs, packet processors, and switch ASICs, providing custom packet classification, time stamping, and protocol conversion. Its 426 user I/Os accommodate multiple SGMII/RGMII PHY interfaces, and the 4 PLLs generate the precise clocks required for 1G/2.5G Ethernet and PTP synchronization. Embedded memory supports packet buffering at line rates without external SRAM. According to Altera application notes, Cyclone IV E FPGAs are used in industrial Ethernet switches, network interface cards, and small-cell base stations where low power and flexible I/O are valued.
추천
추천 제품 요약
엔지니어링 참조 데이터: EP4CE75F29C7N — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EP4CE75F29C8N | EP4CE75F29I7N | EP4CE115F29C7N | EP4CE55F29C7N | EP4CE40F29C7N |
|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | 780-ball FBGA (F29) | 780-ball FBGA (F29) - same | 780-ball FBGA (F29) - same | 780-ball FBGA (F29) - same | 780-ball FBGA (F29) - same | 780-ball FBGA (F29) - same |
| Logic Elements | 75,408 | 75,408 (same die) | 75,408 (same die) | 114,480 (+52%) | 55,856 (-26%) | 39,600 (-47%) |
| Embedded Memory (bits) | 2,810,880 | 2,810,880 (same) | 2,810,880 (same) | 3,981,312 (+42%) | 2,340,000 (-17%) | 1,134,000 (-60%) |
| Speed Grade | C7 (commercial) | C8 (faster, commercial) | I7 (industrial temp) | C7 (commercial) | C7 (commercial) | C7 (commercial) |
| Temperature Grade | Commercial 0C to +85C | Commercial 0C to +85C | Industrial -40C to +100C | Commercial 0C to +85C | Commercial 0C to +85C | Commercial 0C to +85C |
| 18x18 Multipliers | 200 | 200 (same) | 200 (same) | 266 (+33%) | 156 (-22%) | 116 (-42%) |
| PLLs | 4 | 4 (same) | 4 (same) | 4 (same) | 4 (same) | 4 (same) |
주요 차별점
- Faster C8 speed grade option in same package for timing-critical designs (vs EP4CE75F29C8N)
- Industrial temperature variant in same package (vs EP4CE75F29I7N)
- Scalable density within same F29 package family (vs EP4CE115F29C7N)
설계 노트
Provide a clean, low-noise 1.2 V core supply from a dedicated LDO or DC-DC regulator with output filtering. The EP4CE75F29C7N draws substantial transient current during configuration and dynamic logic activity; per the Cyclone IV handbook, place 0.1 uF decoupling capacitors within 100 mils of every VCC/VCCINT pin group, supplemented by 4.7 uF and 10 uF bulk capacitors near each supply pin. Do NOT share the 1.2 V rail with noisy switching regulators without adequate LC filtering, as logic errors and JTAG configuration failures can result.
The 780-ball F29 FineLine BGA uses a 1.0 mm pitch, requiring microvia or via-in-pad PCB technology for reliable assembly. Per JEDEC MSL-3 handling requirements, the device must be baked (typically 125C for 24 hours) and reflowed within 168 hours of moisture-bag opening. Ground and power planes should be placed in inner PCB layers with short, low-inductance stitching vias to BGA ground balls; signal escape routing should use the top two layers to keep the breakout region manageable.
Do NOT confuse F29 (780-ball) with F23 (484-pin) packages - they share no pin compatibility despite similar family naming. Verify in Quartus Pin Planner that selected I/O bank reference voltages match your interface standards (e.g., 1.5 V for DDR3, 2.5 V for LVCMOS). When migrating from a smaller Cyclone IV E (e.g., EP4CE40) to EP4CE75, remember that unused I/O pins must be explicitly terminated or configured as outputs to avoid floating-input oscillation in noisy environments.
규정 준수 정보
RoHS and lead-free compliant per Altera product page. AEC-Q100 qualification applies only to 'A' speed-grade variants, not the C7 commercial part. MSL-3 moisture sensitivity per JEDEC J-STD-020.
