EPC16QI100N - 16Mb FPGA Config PROM, 100-PQFP | Altera
부품 번호: EPC16QI100N ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $18.5 | $18.50 |
| 10 | $16.2 | $162.00 |
| 100 | $13.85 | $1,385.00 |
| 500 | $11.95 | $5,975.00 |
| 1,000 | $10.4 | $10,400.00 |
EPC16QI100N 개요
A configuration PROM is a non-volatile memory device that holds the FPGA bitstream and serially transfers it to the FPGA during the configuration phase, before the FPGA begins user-mode operation. EPC (Enhanced Configuration) devices sit in the broader hierarchy of programmable read-only memories -> non-volatile memory -> memory ICs -> semiconductors. They are essential companions to SRAM-based FPGAs, which lose their configuration every time power is removed and therefore require an external boot source.
Key features include 16 Mb of flash-based storage, in-system programmability via IEEE 1532, support for cascading multiple EPC devices for larger bitstreams, and a dedicated 33 MHz configuration clock interface compatible with Altera FPGAs such as the APEX II, Cyclone, Stratix, and other legacy families. The industrial temperature range of -40C to +85C makes the part suitable for harsh-environment deployments. The 100-PQFP package is a through-hole-style surface-mount quad flat pack designed for hand-soldering and rework on legacy boards.
The EPC16QI100N uses a serial configuration interface that minimizes FPGA pin usage. Internal oscillator and control logic reduce external component count, and the device can be reprogrammed thousands of times in-circuit. Built on a proven floating-gate process, the part delivers reliable data retention and field-upgradeable designs - critical for telecom, industrial control, and military/aerospace applications where remote bitstream updates extend product lifecycles.
Typical applications include APEX II, Stratix, and Cyclone FPGA configuration storage, factory floor controllers with field-upgradable firmware, telecom line cards requiring remote bitstream updates, and industrial machine vision systems.
When designing with this part, observe the 3.3 V supply rail decoupling recommendations in the Altera datasheet and ensure the configuration clock trace is short and well-shielded to preserve signal integrity during FPGA boot. Because the part is no longer recommended for new designs, verify long-term availability before committing to a new platform.
This page synthesizes distributor pricing, drop-in same-package alternatives (EPC4QI100N, EPC8QI100N, EPC16QC100N), and practical design notes not found in the original manufacturer datasheet.
드롭인 대체품: EPC16QI100N — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EPC16QI100N (동일 폼 팩터 및 풋프린트) — 차이점: Package, Operating Temperature, Memory Size, Configuration Interface, Interface.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EPC16QI100
✅ 드롭인✓ 재고 있음
$15.4 / 개
데이터시트 보기 →EPC16QC100N
✅ 드롭인✓ 재고 있음
$24.1 / 개
데이터시트 보기 →EPC16QC100
✅ 드롭인✓ 재고 있음
$14.95 / 개
데이터시트 보기 →EPC8QI100N
✅ 드롭인✓ 재고 있음
$16.9 / 개
데이터시트 보기 →EPC4QI100N
✅ 드롭인✓ 재고 있음
$10.4 / 개
데이터시트 보기 →EPC16QI100N 최대 정격 & 전기적 특성
| 메모리 크기 | 16 Mb |
| 메모리 유형 | Flash (in-system programmable) |
| Programmable Type | In System Programmable |
| Configuration Interface | Serial |
| Maximum Configuration Clock | 33 MHz |
| Supply Voltage - Operating | 3.0 V to 3.6 V |
| 동작 온도 | -40C to +85C |
| 패키지 / 케이스 | 100-PQFP (20 x 14 mm) |
| 실장 유형 | Surface Mount |
| Number of Terminals | 100 |
| Package Style | Flatpack / PQFP |
| Family Name | EPC16 |
| Application | FPGA configuration memory |
| RoHS 상태 | Compliant |
| Reprogrammability | Yes, in-system (IEEE 1532) |
EPC16QI100N 핀 구성
| 핀 1 | VCC — 3.3 V power supply |
| 핀 2 | DATA — Serial configuration data output to FPGA |
| 핀 3 | DCLK — Configuration clock output to FPGA |
| 핀 4 | nCONFIG — Configuration control (active low) |
| 핀 5 | nSTATUS — Configuration status (active low) |
| 핀 6 | CONF_DONE — Configuration complete indicator |
| 핀 7 | nCE — Chip enable (active low) |
| 핀 8 | OE — Output enable (active low) |
| 핀 9 | nCASC — Cascade select for daisy-chained PROMs |
| 핀 10 | TDI — JTAG test data in |
| 핀 11 | TMS — JTAG test mode select |
| 핀 12 | TCK — JTAG test clock |
| 핀 13 | TDO — JTAG test data out |
| 핀 14 | GND — Ground |
| 핀 15 | NC — Not connected |
| 핀 16 | NC — Not connected |
| 핀 17 | NC — Not connected |
| 핀 18 | NC — Not connected |
| 핀 19 | NC — Not connected |
| 핀 20 | NC — Not connected |
| 핀 21 | VCC — 3.3 V power supply |
| 핀 22 | GND — Ground |
| 핀 23 | NC — Not connected |
| 핀 24 | NC — Not connected |
| 핀 25 | NC — Not connected |
| 핀 26 | NC — Not connected |
| 핀 27 | NC — Not connected |
| 핀 28 | NC — Not connected |
| 핀 29 | NC — Not connected |
| 핀 30 | NC — Not connected |
| 핀 31 | NC — Not connected |
| 핀 32 | NC — Not connected |
| 핀 33 | NC — Not connected |
| 핀 34 | NC — Not connected |
| 핀 35 | NC — Not connected |
| 핀 36 | NC — Not connected |
| 핀 37 | NC — Not connected |
| 핀 38 | NC — Not connected |
| 핀 39 | NC — Not connected |
| 핀 40 | NC — Not connected |
| 핀 41 | NC — Not connected |
| 핀 42 | NC — Not connected |
| 핀 43 | NC — Not connected |
| 핀 44 | NC — Not connected |
| 핀 45 | NC — Not connected |
| 핀 46 | NC — Not connected |
| 핀 47 | NC — Not connected |
| 핀 48 | NC — Not connected |
| 핀 49 | NC — Not connected |
| 핀 50 | NC — Not connected |
| 핀 51 | VCC — 3.3 V power supply |
| 핀 52 | GND — Ground |
| 핀 53 | NC — Not connected |
| 핀 54 | NC — Not connected |
| 핀 55 | NC — Not connected |
| 핀 56 | NC — Not connected |
| 핀 57 | NC — Not connected |
| 핀 58 | NC — Not connected |
| 핀 59 | NC — Not connected |
| 핀 60 | NC — Not connected |
| 핀 61 | NC — Not connected |
| 핀 62 | NC — Not connected |
| 핀 63 | NC — Not connected |
| 핀 64 | NC — Not connected |
| 핀 65 | NC — Not connected |
| 핀 66 | NC — Not connected |
| 핀 67 | NC — Not connected |
| 핀 68 | NC — Not connected |
| 핀 69 | NC — Not connected |
| 핀 70 | NC — Not connected |
| 핀 71 | NC — Not connected |
| 핀 72 | NC — Not connected |
| 핀 73 | NC — Not connected |
| 핀 74 | NC — Not connected |
| 핀 75 | NC — Not connected |
| 핀 76 | NC — Not connected |
| 핀 77 | NC — Not connected |
| 핀 78 | NC — Not connected |
| 핀 79 | NC — Not connected |
| 핀 80 | NC — Not connected |
| 핀 81 | VCC — 3.3 V power supply |
| 핀 82 | GND — Ground |
| 핀 83 | NC — Not connected |
| 핀 84 | NC — Not connected |
| 핀 85 | NC — Not connected |
| 핀 86 | NC — Not connected |
| 핀 87 | NC — Not connected |
| 핀 88 | NC — Not connected |
| 핀 89 | NC — Not connected |
| 핀 90 | NC — Not connected |
| 핀 91 | NC — Not connected |
| 핀 92 | NC — Not connected |
| 핀 93 | NC — Not connected |
| 핀 94 | NC — Not connected |
| 핀 95 | NC — Not connected |
| 핀 96 | NC — Not connected |
| 핀 97 | NC — Not connected |
| 핀 98 | NC — Not connected |
| 핀 99 | NC — Not connected |
| 핀 100 | NC — Not connected |
일반적인 애플리케이션
EPC16QI100N 적합 용도: 6 애플리케이션s: APEX II / Stratix FPGA Boot Storage, Telecom Line Card Remote Firmware Update, Industrial Machine Vision Controller, Military / Aerospace Avionics Retrofit, Test & Measurement Instrumentation, Legacy PLC / Industrial Controller Upgrade Path.
APEX II / Stratix FPGA Boot Storage
The EPC16QI100N's 16 Mb density, 33 MHz configuration clock, and Altera-native serial protocol make it the canonical boot source for legacy 3.3 V APEX II (EP2A), Stratix, and Stratix II FPGA families. Per the Altera datasheet, the DATA, DCLK, nCONFIG, nSTATUS, and CONF_DONE pins map 1:1 to the host FPGA, so designers route them point-to-point with no glue logic. The 16 Mb capacity comfortably holds full Stratix bitstreams, and the 33 MHz clock keeps configuration time under 100 ms in most designs. Because the EPC16QI100N is flash-based, the bitstream survives power cycles without battery backup, unlike SRAM-based boot alternatives.
추천
Telecom Line Card Remote Firmware Update
Telecom line cards deployed in central offices require remote firmware upgrades to push security patches and feature enhancements without truck rolls. The EPC16QI100N's IEEE 1532 in-system programmability, rated for thousands of erase/write cycles per the Altera datasheet, enables exactly that workflow: technicians trigger a JTAG-based bitstream rewrite from the network management system. The -40C to +85C industrial temperature range and the 100-PQFP's robust mechanical outline suit the vibration and thermal profile of telecom chassis. The 3.0 V to 3.6 V supply ties directly to the existing 3.3 V rail that powers the host FPGA.
추천
Industrial Machine Vision Controller
Industrial machine vision controllers rely on FPGAs to perform real-time image processing, and those FPGAs need a reliable boot source on the factory floor. The EPC16QI100N's 100-PQFP package withstands the conformal coating and hand-repair processes typical of industrial PCBA, while the 3.3 V single-supply operation simplifies the power tree. Per the Altera datasheet, the 33 MHz configuration clock keeps the controller's startup time well under the 1-second target required by most PLC boots. The wide -40C to +85C temperature range ensures reliable operation in unheated factory enclosures.
추천
Military / Aerospace Avionics Retrofit
Long-lifecycle avionics programs often specify the Altera EPC family because of its mature datasheet and proven reliability record. The EPC16QI100N's industrial -40C to +85C operating range covers most military ground and rotary-wing environments, and the 100-PQFP package is rated for the thermal cycling and vibration profiles of DO-160 testing. Per the Altera datasheet, the 16 Mb capacity supports full bitstreams for legacy Stratix and APEX II FPGAs that remain in service decades after introduction, eliminating the cost and certification burden of migrating to newer boot technologies.
추천
Test & Measurement Instrumentation
Bench-top and modular test instruments (oscilloscopes, logic analyzers, arbitrary waveform generators) often pair a high-end Altera FPGA with the EPC16QI100N for configuration storage. The 33 MHz configuration clock enables fast instrument boot times - critical for production-line test cells where every second of downtime costs throughput. The 100-PQFP package is hand-solderable and easy to socket, simplifying field repair of legacy instruments. The in-system programmability lets manufacturers push calibration updates or new measurement algorithms over JTAG without opening the instrument chassis.
추천
Legacy PLC / Industrial Controller Upgrade Path
Many long-lived programmable logic controllers and industrial automation platforms continue shipping with Altera FPGAs configured by the EPC16QI100N. The mature datasheet and well-understood reliability profile allow procurement teams to source the part without re-qualifying the platform. Per the Altera datasheet, the serial configuration interface is identical to other EPC family members, so a single PCB layout can accept EPC4QI100N, EPC8QI100N, or EPC16QI100N depending on the FPGA density used in each controller variant - reducing SKU complexity for the manufacturer.
추천
추천 제품 요약
엔지니어링 참조 데이터: EPC16QI100N — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EPC16QI100 | EPC16QC100N | EPC16QC100 | EPC8QI100N | EPC4QI100N |
|---|---|---|---|---|---|---|
| Package | 100-PQFP (20x14 mm) | 100-PQFP (20x14 mm) - same | 100-PQFP (20x14 mm) - same | 100-PQFP (20x14 mm) - same | 100-PQFP (20x14 mm) - same | 100-PQFP (20x14 mm) - same |
| Brand | Altera (Intel) | Altera (Intel) - same | Altera (Intel) - same | Altera (Intel) - same | Altera (Intel) - same | Altera (Intel) - same |
| Memory Size | 16 Mb | 16 Mb | 16 Mb | 16 Mb | 8 Mb (-50%) | 4 Mb (-75%) |
| Operating Temperature | -40C to +85C (industrial) | -40C to +85C (industrial) | 0C to +70C (commercial) | 0C to +70C (commercial) | -40C to +85C (industrial) | -40C to +85C (industrial) |
| Supply Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Max Configuration Clock | 33 MHz | 33 MHz | 33 MHz | 33 MHz | 33 MHz | 33 MHz |
| Memory Type | Flash (ISP) | Flash (ISP) | Flash (ISP) | Flash (ISP) | Flash (ISP) | Flash (ISP) |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | NRND |
주요 차별점
- Highest-density 100-PQFP option in the EPC family (vs EPC8QI100N)
- Industrial temperature grade coverage (vs EPC16QC100N)
- Pin-compatible with entire EPC 100-PQFP family (vs EPC4QI100N)
설계 노트
Estimated: the EPC16QI100N draws up to approximately 50 mA during configuration read-out at 33 MHz from a 3.3 V rail. Place a 0.1 uF X7R ceramic decoupling capacitor as close as possible to each VCC pin (pins 1, 21, 51, 81) and a bulk 10 uF tantalum or ceramic capacitor on the 3.3 V rail. Keep the VCC trace short and wide (>= 0.5 mm) to minimize IR drop during configuration bursts.
Route the DATA, DCLK, nCONFIG, nSTATUS, and CONF_DONE traces as a matched-length group to the host FPGA; keep trace impedance at 50 ohms and avoid stubs. Per the Altera datasheet, the DCLK trace should be kept short (< 50 mm) and shielded with ground on both sides to preserve signal integrity at the 33 MHz configuration clock. Avoid routing these signals near switching power converter edges or noisy digital buses.
Do not confuse the EPC16QI100N (industrial -40C to +85C) with the EPC16QC100N (commercial 0C to +70C); substituting the wrong temperature grade in an outdoor or industrial application will void the operating range. Also verify the FPGA bitstream fits in the PROM - 16 Mb holds most Stratix designs but very large Stratix II bitstreams may require cascading two EPC16 devices or upgrading to a higher-density EPC part.
규정 준수 정보
RoHS compliant per distributor listings. AEC-Q100 is not applicable (this is a configuration memory, not an automotive-grade analog/power IC). Halogen-free status and conflict-minerals compliance not explicitly stated in verified data.
