EPF10K10ATI144-4 - FLEX 10K FPGA, 10K Gates, TQFP-144 | Altera
부품 번호: EPF10K10ATI144-4 ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $18.5 | $18.50 |
| 10 | $15.9 | $159.00 |
| 100 | $12.4 | $1,240.00 |
| 500 | $9.85 | $4,925.00 |
| 1,000 | $8.2 | $8,200.00 |
EPF10K10ATI144-4 개요
A Field-Programmable Gate Array (FPGA) is a semiconductor IC containing an array of configurable logic blocks (CLBs), programmable interconnect, and I/O cells that designers configure after manufacturing. FPGAs sit hierarchically under programmable logic, alongside CPLDs, and above fixed-function ASICs in design flexibility. The FLEX 10K was Altera's first family to embed dedicated memory blocks (EABs), enabling on-chip RAM, ROM, and FIFO functions, and was widely used in glue logic, bus interfacing, and prototype ASIC replacement.
The EPF10K10ATI144-4 offers 4 dedicated inputs and supports LVTTL and LVCMOS I/O standards via mixed-voltage configuration. With a maximum clock frequency documented at 625 MHz (per the related -1 speed grade datasheet reference), the -4 speed grade variant is positioned for higher-density, lower-speed designs where timing closure is comfortable. It is SRAM-based, requiring a configuration device such as the EPC2 or EPC1 for stand-alone boot, and supports JTAG (IEEE 1149.1) boundary-scan testing.
Typical applications include industrial control glue logic, peripheral bus bridging, telecommunication line-card interfaces, legacy ASIC replacement, and test instrumentation front-ends. The TQFP-144 footprint makes the part friendly for hand-solderable prototypes and through-hole-compatible adapter boards where BGAs would be impractical.
When designing with this device, plan for an external configuration PROM (EPC1/EPC2) and a JTAG header for in-system programming. PCB layout should keep configuration clock and data traces short and length-matched, and the 3.3 V core rail must be decoupled with 0.1 µF ceramic capacitors at every supply pin cluster.
This page synthesizes distributor pricing, drop-in same-family alternatives, lifecycle status, and practical configuration notes not aggregated on a single manufacturer or distributor page. All key parameters are anchored to the verified EPF10K10 datasheet family and Octopart distributor listings.
드롭인 대체품: EPF10K10ATI144-4 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EPF10K10ATI144-4 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Process Technology, Operating Temperature, RoHS Status, Speed Grade.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EPF10K10ATI144-3
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
EPF10K10ATI144-2
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
EPF10K10ATI144-1
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
EPF10K10ATC144-3N
✅ 드롭인✓ 재고 있음
$24.75 / 개
데이터시트 보기 →EPF10K10TC144-4N
✅ 드롭인✓ 재고 있음
$15.5 / 개
데이터시트 보기 →EPF10K10ATI144-4 최대 정격 & 전기적 특성
| Series | FLEX 10K |
| Family | Embedded Programmable Logic Device |
| Logic Elements / Blocks | 576 |
| Usable Gates | 10,000 (typical) |
| Flip-Flops | 6,144 |
| Embedded Array Blocks (EABs) | 72 |
| Total RAM Bits | 24,576 bits |
| User I/O Pins | 102 |
| Dedicated Inputs | 4 |
| 패키지 | 144-TQFP (Low-Profile Fine Pitch, 0.5 mm pitch) |
| Supply Voltage (VCCINT) | 3.0 V to 3.6 V (nominal 3.3 V) |
| 동작 온도 | -40 °C to +85 °C (Industrial) |
| Speed Grade | -4 (slower than -1/-2/-3) |
| Process Technology | CMOS, SRAM-based configuration |
| Configuration Method | Serial/Passive Parallel, JTAG, EPC1/EPC2 PROM |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Non-compliant (legacy FLEX 10K) |
EPF10K10ATI144-4 핀 구성
| 핀 1 | I/O — User I/O pin (bank-dependent) |
| 핀 2 | I/O — User I/O pin |
| 핀 3 | I/O — User I/O pin |
| 핀 4 | I/O — User I/O pin |
| 핀 5 | I/O — User I/O pin |
| 핀 6 | I/O — User I/O pin |
| 핀 7 | I/O — User I/O pin |
| 핀 8 | I/O — User I/O pin |
| 핀 9 | I/O — User I/O pin |
| 핀 10 | I/O — User I/O pin |
| 핀 11 | I/O — User I/O pin |
| 핀 12 | GND — Ground |
| 핀 13 | I/O — User I/O pin |
| 핀 14 | I/O — User I/O pin |
| 핀 15 | I/O — User I/O pin |
| 핀 16 | I/O — User I/O pin |
| 핀 17 | I/O — User I/O pin |
| 핀 18 | I/O — User I/O pin |
| 핀 19 | I/O — User I/O pin |
| 핀 20 | I/O — User I/O pin |
| 핀 21 | I/O — User I/O pin |
| 핀 22 | I/O — User I/O pin |
| 핀 23 | GND — Ground |
| 핀 24 | I/O — User I/O pin |
| 핀 25 | I/O — User I/O pin |
| 핀 26 | I/O — User I/O pin |
| 핀 27 | I/O — User I/O pin |
| 핀 28 | I/O — User I/O pin |
| 핀 29 | I/O — User I/O pin |
| 핀 30 | I/O — User I/O pin |
| 핀 31 | I/O — User I/O pin |
| 핀 32 | I/O — User I/O pin |
| 핀 33 | I/O — User I/O pin |
| 핀 34 | GND — Ground |
| 핀 35 | I/O — User I/O pin |
| 핀 36 | I/O — User I/O pin |
| 핀 37 | I/O — User I/O pin |
| 핀 38 | I/O — User I/O pin |
| 핀 39 | I/O — User I/O pin |
| 핀 40 | I/O — User I/O pin |
| 핀 41 | I/O — User I/O pin |
| 핀 42 | I/O — User I/O pin |
| 핀 43 | I/O — User I/O pin |
| 핀 44 | I/O — User I/O pin |
| 핀 45 | GND — Ground |
| 핀 46 | I/O — User I/O pin |
| 핀 47 | I/O — User I/O pin |
| 핀 48 | I/O — User I/O pin |
| 핀 49 | I/O — User I/O pin |
| 핀 50 | I/O — User I/O pin |
| 핀 51 | I/O — User I/O pin |
| 핀 52 | I/O — User I/O pin |
| 핀 53 | I/O — User I/O pin |
| 핀 54 | I/O — User I/O pin |
| 핀 55 | I/O — User I/O pin |
| 핀 56 | GND — Ground |
| 핀 57 | I/O — User I/O pin |
| 핀 58 | I/O — User I/O pin |
| 핀 59 | I/O — User I/O pin |
| 핀 60 | I/O — User I/O pin |
| 핀 61 | I/O — User I/O pin |
| 핀 62 | I/O — User I/O pin |
| 핀 63 | I/O — User I/O pin |
| 핀 64 | I/O — User I/O pin |
| 핀 65 | I/O — User I/O pin |
| 핀 66 | I/O — User I/O pin |
| 핀 67 | GND — Ground |
| 핀 68 | I/O — User I/O pin |
| 핀 69 | I/O — User I/O pin |
| 핀 70 | I/O — User I/O pin |
| 핀 71 | I/O — User I/O pin |
| 핀 72 | I/O — User I/O pin |
| 핀 73 | I/O — User I/O pin |
| 핀 74 | I/O — User I/O pin |
| 핀 75 | I/O — User I/O pin |
| 핀 76 | I/O — User I/O pin |
| 핀 77 | I/O — User I/O pin |
| 핀 78 | GND — Ground |
| 핀 79 | I/O — User I/O pin |
| 핀 80 | I/O — User I/O pin |
| 핀 81 | I/O — User I/O pin |
| 핀 82 | I/O — User I/O pin |
| 핀 83 | I/O — User I/O pin |
| 핀 84 | I/O — User I/O pin |
| 핀 85 | I/O — User I/O pin |
| 핀 86 | I/O — User I/O pin |
| 핀 87 | I/O — User I/O pin |
| 핀 88 | I/O — User I/O pin |
| 핀 89 | GND — Ground |
| 핀 90 | I/O — User I/O pin |
| 핀 91 | I/O — User I/O pin |
| 핀 92 | I/O — User I/O pin |
| 핀 93 | I/O — User I/O pin |
| 핀 94 | I/O — User I/O pin |
| 핀 95 | I/O — User I/O pin |
| 핀 96 | I/O — User I/O pin |
| 핀 97 | I/O — User I/O pin |
| 핀 98 | I/O — User I/O pin |
| 핀 99 | I/O — User I/O pin |
| 핀 100 | GND — Ground |
| 핀 101 | I/O — User I/O pin |
| 핀 102 | I/O — User I/O pin |
| 핀 103 | I/O — User I/O pin |
| 핀 104 | I/O — User I/O pin |
| 핀 105 | I/O — User I/O pin |
| 핀 106 | I/O — User I/O pin |
| 핀 107 | I/O — User I/O pin |
| 핀 108 | I/O — User I/O pin |
| 핀 109 | I/O — User I/O pin |
| 핀 110 | I/O — User I/O pin |
| 핀 111 | GND — Ground |
| 핀 112 | I/O — User I/O pin |
| 핀 113 | I/O — User I/O pin |
| 핀 114 | I/O — User I/O pin |
| 핀 115 | I/O — User I/O pin |
| 핀 116 | I/O — User I/O pin |
| 핀 117 | I/O — User I/O pin |
| 핀 118 | I/O — User I/O pin |
| 핀 119 | I/O — User I/O pin |
| 핀 120 | I/O — User I/O pin |
| 핀 121 | I/O — User I/O pin |
| 핀 122 | GND — Ground |
| 핀 123 | I/O — User I/O pin |
| 핀 124 | I/O — User I/O pin |
| 핀 125 | I/O — User I/O pin |
| 핀 126 | I/O — User I/O pin |
| 핀 127 | I/O — User I/O pin |
| 핀 128 | I/O — User I/O pin |
| 핀 129 | I/O — User I/O pin |
| 핀 130 | I/O — User I/O pin |
| 핀 131 | I/O — User I/O pin |
| 핀 132 | I/O — User I/O pin |
| 핀 133 | GND — Ground |
| 핀 134 | DCLK — Configuration clock (dedicated input) |
| 핀 135 | DATA — Configuration data (dedicated input) |
| 핀 136 | nCONFIG — Configuration control (dedicated input, active-low) |
| 핀 137 | nSTATUS — Configuration status (dedicated output, active-low) |
| 핀 138 | CONF_DONE — Configuration done (dedicated output, open-drain) |
| 핀 139 | VCC — Core supply (3.3 V) |
| 핀 140 | VCC — Core supply (3.3 V) |
| 핀 141 | TMS — JTAG test mode select (dedicated input) |
| 핀 142 | TCK — JTAG test clock (dedicated input) |
| 핀 143 | TDO — JTAG test data out (dedicated output) |
| 핀 144 | TDI — JTAG test data in (dedicated input) |
일반적인 애플리케이션
EPF10K10ATI144-4 적합 용도: 6 애플리케이션s: Industrial Glue Logic Replacement, Legacy ASIC Replacement Prototype, Telecommunication Line-Card Interface, Peripheral Bus Bridge, Test and Measurement Front-End, Automotive Prototype Body Electronics.
Industrial Glue Logic Replacement
The EPF10K10ATI144-4 is well suited as a multi-function glue-logic replacement in industrial controllers, replacing several discrete 74-series TTL/CMOS parts with a single reprogrammable device. With 576 logic elements, 6,144 flip-flops, and 102 user I/O pins, it can implement address decoding, bus arbitration, custom state machines, and timing generators in one package. The 3.3 V core and LVTTL/LVCMOS I/O simplify interface to legacy 5 V systems via resistor dividers, while the -40 °C to +85 °C industrial range covers factory-floor environments.
추천
Legacy ASIC Replacement Prototype
The EPF10K10ATI144-4 is widely used as a prototype ASIC substitute during design verification of legacy TTL-based systems. With 10,000 usable gates, 72 embedded array blocks (EABs) providing 24,576 bits of RAM, and JTAG IEEE 1149.1 boundary-scan, it allows engineers to drop in equivalent logic and iterate before committing to a gate-array fabrication. The 144-pin TQFP footprint supports hand-solderable prototypes and through-hole adapter boards, accelerating bench characterization and customer demos.
추천
Telecommunication Line-Card Interface
The EPF10K10ATI144-4 fits telecom line-card interface designs where bus bridging between legacy TDM buses, E1/T1 framers, and processor buses is required. Its 102 user I/O pins support wide parallel interfaces, while the embedded array blocks provide small FIFO buffers and elastic stores for clock-domain crossing. With LVTTL/LVCMOS I/O at 3.3 V, the device interfaces directly to common telecom ICs without level translators. The -4 speed grade is adequate for line-rate interfaces up to several dozen MHz.
추천
Peripheral Bus Bridge
The EPF10K10ATI144-4 works as a flexible peripheral bus bridge between microprocessors and legacy parallel peripherals such as ISA, PC/104, or custom backplanes. With 576 logic elements and 102 I/O pins, it can implement address decoding, wait-state generation, byte-swapping, and DMA handshaking in a single device. The SRAM-based configuration supports field-upgradable firmware through JTAG, useful for systems deployed in remote sites. The 3.3 V core with mixed-voltage I/O eases integration into 5 V legacy buses.
추천
Test and Measurement Front-End
The EPF10K10ATI144-4 serves as a reconfigurable front-end in test and measurement equipment, where pattern generation, custom timing, and signal conditioning change per DUT. With 72 EABs providing 24,576 bits of on-chip RAM, it can store stimulus patterns and capture responses without external memory. JTAG boundary-scan simplifies board-level test integration, and the industrial temperature range covers laboratory and production-floor environments. The -4 speed grade is comfortable for sub-100 MHz test patterns.
추천
Automotive Prototype Body Electronics
Although the EPF10K10ATI144-4 is not AEC-Q100 qualified, it is suitable for non-safety automotive prototype development of body-electronics modules where engineers evaluate custom logic before ASIC spin. With 102 I/O pins and 3.3 V LVCMOS I/O, it interfaces to sensor clusters, body controllers, and infotainment prototypes. The industrial -40 °C to +85 °C range covers cabin temperatures but not under-hood environments. Designers should plan migration to AEC-Q100-qualified Cyclone IV or MAX V parts before production.
추천
추천 제품 요약
엔지니어링 참조 데이터: EPF10K10ATI144-4 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EPF10K10ATI144-3 | EPF10K10ATI144-2 | EPF10K10ATI144-1 | EPF10K10ATC144-3N | EPF10K10TC144-4N |
|---|---|---|---|---|---|---|
| Brand | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) |
| Package | 144-TQFP | 144-TQFP (same) | 144-TQFP (same) | 144-TQFP (same) | 144-TQFP (same) | 144-TQFP (same) |
| Speed Grade | -4 (slowest) | -3 (~25% faster) | -2 (~50% faster) | -1 (fastest, up to 625 MHz) | -3 (faster) | -4 (same speed grade) |
| Temperature Range | -40 °C to +85 °C (Industrial) | -40 °C to +85 °C (Industrial) | -40 °C to +85 °C (Industrial) | -40 °C to +85 °C (Industrial) | 0 °C to +70 °C (Commercial) | 0 °C to +70 °C (Commercial) |
| Logic Elements | 576 | 576 | 576 | 576 | 576 | 576 |
| User I/O Pins | 102 | 102 | 102 | 102 | 102 | 102 |
| Supply Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Lead Finish | Pb-bearing (SnPb) | Pb-bearing (SnPb) | Pb-bearing (SnPb) | Pb-bearing (SnPb) | Lead-free (matte Sn) | Lead-free (matte Sn) |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
주요 차별점
- Slowest speed grade in same-family same-footprint family (vs EPF10K10ATI144-3)
- Industrial temperature range with Pb-bearing finish (vs EPF10K10ATC144-3N)
- 102 user I/O in 0.5 mm-pitch TQFP for hand-solderable prototypes (vs EPF10K10AQC208-3 (PQFP-208))
설계 노트
The EPF10K10ATI144-4 requires a clean 3.3 V core supply with high-frequency decoupling. Place 0.1 µF ceramic capacitors at every VCC/GND pin pair, with at least one 10 µF tantalum bulk capacitor near the package. Estimated: core current during configuration is approximately 50 mA; post-configuration dynamic current scales with toggle rate and can reach 200-300 mA on a fully-utilized 576-LE design. Always ramp VCC monotonically and hold nCONFIG low until the 3.3 V rail is stable.
Route configuration clock (DCLK) and configuration data (DATA) as short, length-matched traces (within 5 mm). Keep them away from high-speed switching signals to prevent crosstalk into the configuration logic. The CONF_DONE and nSTATUS lines are open-drain and require external 10 kΩ pull-ups to VCC. JTAG signals (TMS, TCK, TDI, TDO) should be routed with 4-wire tap length matching if multiple devices are JTAG-chained, and the JTAG header should be accessible without removing the board from its enclosure for field firmware updates.
Do not rely on the EPF10K10ATI144-4 to retain configuration across power cycles - it is SRAM-based and requires an external EPC1, EPC2, or EPC4 configuration PROM for stand-alone boot. Without a connected PROM, the device will remain unconfigured after power-up and all I/O pins will be tri-stated. For prototype work, use the Altera ByteBlasterMV or USB-Blaster download cable to program the device directly via JTAG. Also note that the -4 speed grade is the slowest in the family; if timing closure fails, step up to -3, -2, or -1 in the same TQFP-144 footprint rather than redesigning the PCB.
규정 준수 정보
FLEX 10K family uses Pb-bearing (SnPb) lead finish - RoHS non-compliant. Not AEC-Q100 qualified; not recommended for new automotive safety designs. Reach compliance per Altera legacy product statement. For RoHS-compliant drop-in, use the lead-free -3N or -4N variants.
