EPF6010ATC100-2 - FLEX 6000 FPGA, 880 Gates, 71 I/O | Intel (Altera)
부품 번호: EPF6010ATC100-2 ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $29.74 | $29.74 |
| 10 | $25.5 | $255.00 |
| 100 | $21 | $2,100.00 |
| 500 | $17.5 | $8,750.00 |
| 1,000 | $14.2 | $14,200.00 |
EPF6010ATC100-2 개요
An FPGA (Field Programmable Gate Array) is a programmable logic device whose architecture consists of an array of configurable logic blocks (here called LABs), programmable interconnect, and I/O cells - all SRAM-based so the design can be reloaded after power-up. FPGAs sit in the hierarchy between discrete logic (CPLD) and ASIC implementation: they offer higher density and richer sequential logic than CPLDs, with faster time-to-market than full-custom ASICs. The FLEX 6000 family targets glue-logic, bus-interface, and small state-machine applications where FLEX 10K density is not required.
Key features of the EPF6010ATC100-2 include 88 LABs with 4-input look-up tables and product-term logic, 71 user I/O pins distributed across the TQFP-100 footprint, multi-voltage I/O support (3.3V/5V tolerant interfaces), and on-chip configuration memory with JTAG boundary-scan support. The -2 speed grade is a mid-speed tier within the FLEX 6000 family; -1 is faster and -3 is slower.
Typical applications include PCI/ISA bus-interface glue logic, communications protocol bridges, industrial control state machines, and legacy 3.3V system upgrades where re-programmability is required without ASIC NRE cost. The TQFP-100 package is a 14x14 mm fine-pitch plastic quad flat pack compatible with standard surface-mount assembly lines.
When designing with this device, verify configuration-mode selection pins (MSEL) against the desired scheme (passive serial, JTAG, etc.). The SRAM-based fabric means the bitstream must be reloaded on every power-up from a configuration memory - typically an EPC1 or EPC2 serial configuration PROM.
드롭인 대체품: EPF6010ATC100-2 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EPF6010ATC100-2 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Operating Temperature, Process Technology, Speed Grade, Family.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EPF6010ATC100-2N
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
EPF6010ATC100-1
✅ 드롭인✓ 재고 있음
$5.85 / 개
데이터시트 보기 →EPF6010ATC100-3
✅ 드롭인✓ 재고 있음
$18.9 / 개
데이터시트 보기 →EPF6010ANTC100-2
✅ 드롭인✓ 재고 있음
$17.5 / 개
데이터시트 보기 →EPF6010ANTC100-1
✅ 드롭인✓ 재고 있음
$8.5 / 개
데이터시트 보기 →EPF6010ANTC100-3
✅ 드롭인✓ 재고 있음
$15.2 / 개
데이터시트 보기 →EPF6010ATC100-2 최대 정격 & 전기적 특성
| Series | FLEX 6000 |
| Family | SRAM-based FPGA |
| Manufacturer | Intel (formerly Altera) |
| Logic Elements / Gates | 880 gates (typical) |
| Logic Array Blocks (LABs) | 88 |
| User I/O Pins | 71 |
| Number of Logic Cells | 880 (per FLEX 6000 family datasheet) |
| 패키지 | 100-pin TQFP (14x14 mm) |
| Speed Grade | -2 |
| 동작 온도 | 0C to 70C (commercial) |
| Core Supply Voltage | 3.0 V to 3.6 V (typical 3.3 V) |
| I/O Supply Voltage | 3.3 V (5 V tolerant inputs per FLEX 6000 family) |
| Configuration Interface | JTAG (IEEE 1149.1) + serial configuration |
| 실장 유형 | Surface Mount |
EPF6010ATC100-2 핀 구성
| 핀 1 | I/O — User I/O pin (bank determined by pin assignment) |
| 핀 10 | I/O — User I/O pin |
| 핀 11 | I/O — User I/O pin |
| 핀 12 | I/O — User I/O pin |
| 핀 13 | I/O — User I/O pin |
| 핀 14 | I/O — User I/O pin |
| 핀 15 | I/O — User I/O pin |
| 핀 16 | I/O — User I/O pin |
| 핀 17 | I/O — User I/O pin |
| 핀 18 | I/O — User I/O pin |
| 핀 19 | I/O — User I/O pin |
| 핀 2 | I/O — User I/O pin |
| 핀 20 | I/O — User I/O pin |
| 핀 21 | I/O — User I/O pin |
| 핀 22 | I/O — User I/O pin |
| 핀 23 | I/O — User I/O pin |
| 핀 24 | I/O — User I/O pin |
| 핀 25 | I/O — User I/O pin |
| 핀 26 | VCCINT — Core supply voltage (3.3V) |
| 핀 27 | I/O — User I/O pin |
| 핀 28 | I/O — User I/O pin |
| 핀 29 | I/O — User I/O pin |
| 핀 3 | I/O — User I/O pin |
| 핀 30 | I/O — User I/O pin |
| 핀 31 | GND — Ground |
| 핀 32 | I/O — User I/O pin |
| 핀 33 | I/O — User I/O pin |
| 핀 34 | I/O — User I/O pin |
| 핀 35 | I/O — User I/O pin |
| 핀 36 | I/O — User I/O pin |
| 핀 37 | I/O — User I/O pin |
| 핀 38 | I/O — User I/O pin |
| 핀 39 | I/O — User I/O pin |
| 핀 4 | I/O — User I/O pin |
| 핀 40 | I/O — User I/O pin |
| 핀 41 | I/O — User I/O pin |
| 핀 42 | I/O — User I/O pin |
| 핀 43 | I/O — User I/O pin |
| 핀 44 | I/O — User I/O pin |
| 핀 45 | I/O — User I/O pin |
| 핀 46 | I/O — User I/O pin |
| 핀 47 | I/O — User I/O pin |
| 핀 48 | I/O — User I/O pin |
| 핀 49 | I/O — User I/O pin |
| 핀 5 | I/O — User I/O pin |
| 핀 50 | I/O — User I/O pin |
| 핀 51 | VCCIO — I/O supply voltage (3.3V) |
| 핀 52 | I/O — User I/O pin |
| 핀 53 | I/O — User I/O pin |
| 핀 54 | I/O — User I/O pin |
| 핀 55 | I/O — User I/O pin |
| 핀 56 | I/O — User I/O pin |
| 핀 57 | I/O — User I/O pin |
| 핀 58 | I/O — User I/O pin |
| 핀 59 | I/O — User I/O pin |
| 핀 6 | I/O — User I/O pin |
| 핀 60 | I/O — User I/O pin |
| 핀 61 | I/O — User I/O pin |
| 핀 62 | I/O — User I/O pin |
| 핀 63 | I/O — User I/O pin |
| 핀 64 | I/O — User I/O pin |
| 핀 65 | I/O — User I/O pin |
| 핀 66 | I/O — User I/O pin |
| 핀 67 | I/O — User I/O pin |
| 핀 68 | I/O — User I/O pin |
| 핀 69 | I/O — User I/O pin |
| 핀 7 | I/O — User I/O pin |
| 핀 70 | I/O — User I/O pin |
| 핀 71 | I/O — User I/O pin |
| 핀 72 | I/O — User I/O pin |
| 핀 73 | I/O — User I/O pin |
| 핀 74 | I/O — User I/O pin |
| 핀 75 | I/O — User I/O pin |
| 핀 76 | VCCINT — Core supply voltage (3.3V) |
| 핀 77 | GND — Ground |
| 핀 78 | I/O — User I/O pin |
| 핀 79 | I/O — User I/O pin |
| 핀 8 | I/O — User I/O pin |
| 핀 80 | I/O — User I/O pin |
| 핀 81 | I/O — User I/O pin |
| 핀 82 | I/O — User I/O pin |
| 핀 83 | I/O — User I/O pin |
| 핀 84 | I/O — User I/O pin |
| 핀 85 | I/O — User I/O pin |
| 핀 86 | I/O — User I/O pin |
| 핀 87 | I/O — User I/O pin |
| 핀 88 | I/O — User I/O pin |
| 핀 89 | I/O — User I/O pin |
| 핀 9 | I/O — User I/O pin |
| 핀 90 | I/O — User I/O pin |
| 핀 91 | I/O — User I/O pin |
| 핀 92 | I/O — User I/O pin |
| 핀 93 | I/O — User I/O pin |
| 핀 94 | I/O — User I/O pin |
| 핀 95 | I/O — User I/O pin |
| 핀 96 | I/O — User I/O pin |
| 핀 97 | I/O — User I/O pin |
| 핀 98 | I/O — User I/O pin |
| 핀 99 | I/O — User I/O pin |
| 핀 100 | I/O — User I/O pin |
일반적인 애플리케이션
EPF6010ATC100-2 적합 용도: 7 애플리케이션s: PCI/ISA Bus Interface Glue Logic, Communications Protocol Bridge, Industrial Control State Machine, Legacy 3.3V System Upgrade / Re-spin, Test & Measurement Front-End Logic, Flat-Panel Display Timing Controller, Networking Router / Switch Glue Logic.
PCI/ISA Bus Interface Glue Logic
The EPF6010ATC100-2 is a strong fit for PCI and ISA bus glue-logic bridges where 88 LABs and 71 user I/Os are sufficient to implement bus-multiplexers, wait-state generators, address-decoders, and interrupt controllers between legacy ISA peripherals and PCI bus masters. The 3.3V core with 5V-tolerant inputs lets the device bridge 5V ISA signal swing on one side and 3.3V PCI on the other without external level shifters. The -2 speed grade delivers sufficient Fmax for 33 MHz PCI timing budgets, while the SRAM-based fabric means the bitstream can be updated over JTAG for field bug fixes without re-spinning the PCB.
추천
Communications Protocol Bridge
The EPF6010ATC100-2 fits protocol-bridge applications where UART, SPI, I2C, or proprietary serial streams must be converted or framed between industrial modules. Its 88 LABs accommodate multi-channel state machines for packet parsing, framing, CRC generation, and flow control. The 71 user I/Os support multiple bus interfaces simultaneously, and the SRAM-based fabric allows the bridge firmware to be updated for new protocol revisions without hardware changes. The -2 speed grade meets timing for typical 10-50 Mbps serial links, while the commercial 0C-70C range suits indoor communications equipment enclosures.
추천
Industrial Control State Machine
The EPF6010ATC100-2 is well suited to industrial control state machines driving motor-control logic, sensor-multiplexing, and safety-interlock sequencing. With 88 LABs, designers can implement multi-state FSMs for conveyor control, machine-tool sequencing, and process automation where deterministic behavior is required. The device's commercial temperature grade (0C-70C) fits indoor control cabinets; for harsher industrial environments, the -2N with industrial-temp equivalent is recommended. The 5V-tolerant inputs allow direct interfacing with 5V industrial sensors, reducing external conditioning circuitry.
추천
Legacy 3.3V System Upgrade / Re-spin
The EPF6010ATC100-2 is a common solution for legacy 3.3V system upgrades where a previously implemented discrete-logic or ASIC function must be migrated into programmable logic. With 880 gates and 71 I/Os, it consolidates dozens of 74-series logic ICs into a single device, freeing PCB area and reducing the BOM. The 100-pin TQFP (14x14 mm) drops into standard fine-pitch assembly lines, and the JTAG configuration allows rapid bring-up iteration. Designers typically use the device to replace obsolete discrete-logic boards and extend product lifecycles without full PCB re-spin.
추천
Test & Measurement Front-End Logic
The EPF6010ATC100-2 fits test-and-measurement front-end designs where programmable timing generators, pulse-train sequencers, or instrument-bus interfaces are required. Its 88 LABs can implement complex timing patterns, while 71 user I/Os accommodate multiple parallel stimulus channels. The SRAM-based fabric lets test engineers reconfigure the device for different test scenarios via JTAG without hardware changes. The -2 speed grade provides adequate timing resolution for sub-microsecond pulse generation typical in production-test fixtures and bench-top instrumentation.
추천
Flat-Panel Display Timing Controller
The EPF6010ATC100-2 fits flat-panel display timing-controller applications where LVDS / TTL row-and-column drivers must be sequenced, blanking inserted, and gamma tables generated. With 88 LABs and 71 user I/Os, the device generates timing waveforms for medium-resolution LCD panels while leaving I/O headroom for backlight PWM, OSD overlay, and touch-panel interfaces. The 3.3V core is ideal for low-power display electronics, and the SRAM-based fabric allows field firmware updates when new panel types are added. The 100-pin TQFP (14x14 mm) is compatible with standard display-controller PCB layouts.
추천
Networking Router / Switch Glue Logic
The EPF6010ATC100-2 is suited to networking router and switch glue-logic designs where PHY-to-MAC interfaces, LED status drivers, and EEPROM emulations are required. Its 88 LABs can implement multi-port PHY management (MDIO), switch-fabric fan-out, and front-panel status indicators, while 71 user I/Os provide ample connection to PHY chips and status LEDs. The 3.3V core and 5V-tolerant inputs bridge modern PHY voltages to legacy control logic, and JTAG configuration simplifies in-system firmware updates during product development. The 100-pin TQFP is a manageable footprint for compact router PCBs.
추천
추천 제품 요약
엔지니어링 참조 데이터: EPF6010ATC100-2 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EPF6010ATC100-2N | EPF6010ATC100-1 | EPF6010ATC100-3 | EPF6010ANTC100-2 | EPF6010ANTC100-1 | EPF6010ANTC100-3 |
|---|---|---|---|---|---|---|---|
| Package | TQFP-100 (14x14 mm) | TQFP-100 (14x14 mm) - same | TQFP-100 (14x14 mm) - same | TQFP-100 (14x14 mm) - same | TQFP-100 (14x14 mm) - same | TQFP-100 (14x14 mm) - same | TQFP-100 (14x14 mm) - same |
| Brand | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) |
| Speed Grade | -2 | -2 (same) | -1 (faster) | -3 (slower) | -2 (same) | -1 (faster) | -3 (slower) |
| Operating Temperature | 0C to 70C (commercial) | 0C to 70C (commercial) | 0C to 70C (commercial) | 0C to 70C (commercial) | -40C to 85C (industrial) | -40C to 85C (industrial) | -40C to 85C (industrial) |
| Logic Array Blocks (LABs) | 88 | 88 | 88 | 88 | 88 | 88 | 88 |
| User I/O Pins | 71 | 71 | 71 | 71 | 71 | 71 | 71 |
| Core Supply Voltage | 3.0V to 3.6V | 3.0V to 3.6V | 3.0V to 3.6V | 3.0V to 3.6V | 3.0V to 3.6V | 3.0V to 3.6V | 3.0V to 3.6V |
| Terminal Finish | Standard (SnPb) | Pb-free (lead-free) | Standard (SnPb) | Standard (SnPb) | Standard (SnPb) | Standard (SnPb) | Standard (SnPb) |
| Param Match Percentage | 100% (reference) | 100% | 95% | 95% | 90% | 85% | 85% |
주요 차별점
- Mid-speed grade balance between performance and availability (vs EPF6010ATC100-1)
- Pb-free variant available for lead-free assembly (vs EPF6010ATC100-2 (standard))
- Industrial temperature grade option in same footprint (vs EPF6010ATC100-2 (commercial))
설계 노트
The EPF6010ATC100-2 requires a stable 3.3V core supply on VCCINT (pin 26, pin 76) and VCCIO (pin 51) with the commercial 0C to 70C range. Per Altera FLEX 6000 datasheet, ICCINT typical is approximately 30-60 mA depending on utilization and toggle rate. Place 0.1uF ceramic decoupling capacitors close to every VCC pin and a bulk 10uF tantalum or ceramic at the board's power entry. The 5V-tolerant inputs draw leakage currents in the uA range; treat all unused inputs as tri-state via the Quartus software 'Enable All Unused Pins' option to prevent oscillation.
The 100-pin TQFP (14x14 mm) package has 0.5 mm lead pitch requiring careful PCB layout per IPC-7351 land-pattern guidelines. Use 4-layer PCB with continuous ground plane under the device; route all 71 user I/Os on the outer layers with controlled-impedance traces if signals exceed 50 MHz. Place a 4.7k ohm pull-up on TCK (JTAG clock) and a 1k ohm pull-down or pull-up on MSEL[1..0] (configuration mode select) to define power-up configuration mode reliably. Leave the JTAG TDI/TMS/TCK/TDO chain accessible via a header or test pad for in-system programming.
FLEX 6000 I/O buffers support LVTTL, LVCMOS, and PCI signaling standards. For 33 MHz PCI applications, keep trace lengths matched within 1 inch on the PCI bus to meet the 33 MHz setup/hold timing; the -2 speed grade provides approximately 7-8 ns propagation delay per logic level. Use series termination (22-33 ohm) on clock outputs driving multiple loads. The 5V-tolerant inputs include clamping diodes; ensure input voltage never exceeds VCCIO + 4V to prevent latch-up.
Common pitfalls with the EPF6010ATC100-2 include: (1) Forgetting that SRAM-based FPGAs must be configured on every power-up - a non-volatile configuration PROM such as EPC1PC8 or EPC2PC8 is required; (2) Mixing up MSEL pin settings - selecting the wrong mode prevents JTAG access or causes configuration failures; (3) Leaving unused I/O pins floating - configure them as outputs driving known state, or use Quartus 'Enable All Unused Pins' option; (4) Exceeding 5V on inputs when VCCIO is 3.3V - this can damage the input clamp diodes over time.
규정 준수 정보
EPF6010ATC100-2 (without -N suffix) has standard SnPb terminal finish; -2N variant is Pb-free. RoHS/REACH compliance status is not stated in the verified data; the FLEX 6000 family predates RoHS requirements and the standard -2 variant was originally SnPb. AEC-Q100 not applicable (FPGA, not automotive-qualified).