ICS651MIT - 1-to-4 200 MHz Clock Buffer | Renesas
부품 번호: ICS651MIT ✓ 활성ICS651MIT 개요
A clock fanout buffer is a clock-and-timing integrated circuit that replicates a periodic signal to multiple destinations. Within the broader semiconductor hierarchy, it belongs to clock and timing ICs, then clock buffers and drivers, and ultimately digital logic. Unlike a clock generator, it does not create a new reference frequency; instead, it buffers an existing clock so multiple circuits can receive controlled copies with predictable timing relationships.
The primary features of ICS651MIT are its 1-to-4 fanout architecture, 200 MHz maximum frequency, and 1.425 V to 2.625 V operating supply range. These characteristics make it suitable for low-voltage digital systems that need to distribute a common clock among processors, memory controllers, communication circuits, or custom logic. Its low-skew design helps limit the difference in arrival time between the four buffered outputs.
ICS651MIT belongs to the ICS ClockBlocks family and is positioned as a small, low-skew clock buffer. The 8-SOIC package provides a compact surface-mount implementation for applications that do not require the zero-delay or PLL-based functions offered by more complex clock products. Each buffered output should be treated as a separate clock load, so trace length, loading, and downstream capacitance remain important considerations.
Typical uses include clock distribution in communications equipment, digital logic subsystems, processor clock trees, and embedded control systems. In a multi-destination design, the single clock input can feed four independently routed outputs, reducing duplicated clock-generation circuitry. The part is especially relevant where several sequential circuits must operate from the same timing reference on a low-voltage supply.
Layout quality directly affects clock integrity in a fanout network. Place the input and output decoupling capacitors close to their associated pins, keep output routes short where possible, and avoid routing clock signals through noisy analog or switching-power regions. Maintain a continuous return path beneath or adjacent to each clock trace and observe the device's recommended input and output loading limits from the manufacturer datasheet.
This product page organizes the core electrical characteristics, package information, application guidance, datasheet access, and design considerations for ICS651MIT. It also identifies where replacement verification requires a direct comparison of pinout, supply voltage, frequency, output behavior, and propagation delay before any substitute is approved for production.
드롭인 대체품: ICS651MIT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청ICS651MIT 사양
| Device Type | Fanout Buffer (Distribution) |
| Fanout Ratio | 1 input to 4 outputs |
| Maximum Frequency | 200 MHz |
| Input Signal Type | Clock |
| Output Signal Type | Clock |
| Supply Voltage Range | 1.425 V to 2.625 V |
| 패키지 | 8-SOIC, 3.90 mm width |
| 실장 유형 | Surface mount |
| Packaging | Tape & Reel |
| Product Family | ICS ClockBlocks |
ICS651MIT 8-soic, 3.90 mm width 핀 구성 가이드
ICS651MIT(8-soic, 3.90 mm width 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: ICS651MIT.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ICS651MIT 적합 용도: 6 애플리케이션s: Processor Clock Distribution, Communications Equipment Clocking, Embedded Control Subsystems, Memory Interface Clock Fanout, Industrial Control Logic, FPGA and Custom Logic Clock Trees.
Processor Clock Distribution
The ICS651MIT fits processor clock trees that need one source signal distributed to several destinations. Its 1-to-4 fanout architecture reduces the number of separate clock buffers required when a processor, controller, memory interface, and peripheral logic must share a common reference. The 200 MHz maximum frequency supports medium-speed digital systems, while the 1.425 V to 2.625 V supply range allows integration into compatible low-voltage logic domains. Route each output according to its assigned load, preserve a continuous ground reference, and verify propagation-delay and skew requirements in the timing budget.
추천
Communications Equipment Clocking
The ICS651MIT is useful in communications equipment where several digital sections require synchronized copies of a common clock. A single 1-to-4 fanout stage can feed routing logic, interface circuitry, and control blocks without generating four unrelated clock references. Its 200 MHz operating ceiling accommodates common intermediate-speed digital clocking, and its low-skew positioning helps control output arrival-time differences. Keep clock routes away from switching regulators and high-speed data lanes, and confirm that each destination's input capacitance remains within the manufacturer loading guidance.
추천
Embedded Control Subsystems
ICS651MIT can distribute a system clock among an embedded controller, memory, programmable logic, and external interface circuitry. The 8-SOIC package provides a compact surface-mount implementation for boards where conserving area matters, while the 1-to-4 topology simplifies clock routing compared with duplicating source circuits. The device's 1.425 V to 2.625 V operating range is suitable for low-voltage digital domains, subject to the exact system requirements. Validate setup and hold relationships at every destination because propagation delay and output-to-output skew remain part of the end-to-end timing analysis.
추천
Memory Interface Clock Fanout
The ICS651MIT can provide separate clock branches to memory and interface logic that require a common low-skew timing reference. Its four outputs allow routing decisions to be made according to destination loading rather than forcing one electrical branch to serve unrelated functions. Operation up to 200 MHz makes the device applicable to many external memory and digital-interface clock trees, provided the interface's own maximum frequency is not higher. Use matched routing where branch timing must remain balanced, and validate input and output timing against the Renesas operating characteristics.
추천
Industrial Control Logic
ICS651MIT fits industrial control boards that distribute a common clock among sequencing logic, acquisition paths, and communication interfaces. Low-skew fanout helps maintain consistent command timing across multiple circuit sections, while the 1.425 V to 2.625 V supply range supports low-voltage digital designs. The 200 MHz rating is sufficient for many control and interface circuits, but it does not replace individual device timing checks. Protect clock integrity by isolating traces from motor-control switching nodes, maintaining a solid return plane, and following the recommended decoupling and output-loading requirements.
추천
FPGA and Custom Logic Clock Trees
The ICS651MIT is applicable to FPGA and custom-logic clock trees that need one input distributed across up to four clock domains. The 1-to-4 fanout can provide separate branches for programmable logic, serial interface, control, and status blocks, reducing fanout stress on the original clock source. The 200 MHz ceiling is suitable for many general-purpose digital fabrics, although the target FPGA may specify a higher clock limit. Confirm pinout, input thresholds, output loading, and timing margins before insertion, and route each branch for the load it will actually drive.
추천
추천 제품 요약
엔지니어링 참조 데이터: ICS651MIT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Device Type | Fanout Buffer (Distribution) |
| Fanout Configuration | 1 input to 4 outputs |
| Maximum Frequency | 200 MHz |
| Supply Voltage Range | 1.425 V to 2.625 V |
| Input Signal Type | Clock |
| Output Signal Type | Clock |
| Package | 8-SOIC, 3.90 mm width |
| Brand | Renesas Electronics |
주요 차별점
- Four buffered outputs from one clock source (vs No verified drop-in alternative)
- Compact low-voltage clock distribution (vs No verified drop-in alternative)
- Low-skew multi-output architecture (vs No verified drop-in alternative)
설계 노트
Place the input bypass capacitor and output bypass capacitors close to the associated ICS651MIT pins and ground pads. Keep the clock-input trace short, and route the four outputs directly toward their destinations rather than creating shared stubs. When branch lengths differ substantially, review propagation-delay and skew impact in the system timing budget and use matched routing where the destination devices require closely aligned clocks.
Keep clock traces on a continuous ground reference and avoid crossing plane splits, high-current switching nodes, and unrelated high-speed data lanes. A solid reference plane limits loop area and reduces susceptibility to common-mode noise. If the board includes a separate analog region or a DC-DC converter, maintain controlled spacing between the clock route and those power-conversion paths to minimize coupling into the timing signal.
Treat each of the four outputs as a separate branch with its own capacitive and resistive loading. Confirm input slew rate, output loading, and clock-frequency requirements against the Renesas datasheet before finalizing the schematic. A clean 200 MHz square wave at the source does not guarantee acceptable edge quality at the destination, so confirm the complete source-to-load path with appropriate simulation or measurement.
Do not treat ICS651MIT as a PLL clock generator or a zero-delay buffer; it is a low-skew one-to-four fanout device. Likewise, the 200 MHz maximum is not a guarantee that every output can drive any load at that frequency. Review output loading, pin assignments, supply voltage, and downstream setup-and-hold requirements in the manufacturer datasheet, then validate timing on the assembled board.
규정 준수 정보
No exact RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration for the ICS651MIT ordering code was available for transcription. Obtain the current manufacturer compliance declaration before use in a regulated production release.