Texas Instruments

INA2134UAG4 - 0dB Dual Audio Receiver | Texas Instruments

부품 번호: INA2134UAG4 ✓ 활성
1 V/V (0 dB) Vdss 0 ohm Rds(on) 14-SOIC, 3.90 mm width Package
MOQ: 1 |

INA2134UAG4 개요

The Texas Instruments INA2134UAG4 is a dual-channel, 0 dB differential audio line receiver built from high-performance operational amplifiers and on-chip precision resistors, supplied in a 14-pin SOIC package. Its headline characteristics include a voltage gain of 1 V/V, distortion of 0.0005% at 1 kHz, and a slew rate of 14 V/µs. The receiver is designed to extract a balanced audio signal while rejecting common-mode noise encountered in long, unbalanced interconnects.

An audio differential line receiver is an interface circuit that converts two correlated input voltages into a single-ended output. It belongs to the amplifier-IC hierarchy and combines low-noise operational-amplifier behavior with integrated precision gain-setting resistors. This integration makes it especially useful in professional audio, instrumentation, and communications equipment where predictable gain, low distortion, and compact implementation are more important than user-adjustable amplification.

The INA2134 family provides excellent AC specifications for high-performance audio applications. Key features include 0 dB gain, 14 V/µs slew rate, 74 dB minimum common-mode rejection, and 0.0005% distortion at 1 kHz. Its wide output-voltage swing and strong output drive allow the receiver to operate directly into subsequent audio stages without adding another high-gain amplification stage.

Internally, the two channels use precision on-chip resistors to establish the differential-to-single-ended conversion and unity gain. This approach removes external gain-setting networks while preserving channel consistency. The 14-SOIC package provides a conventional surface-mount footprint and separates the two receiver channels for straightforward dual-audio routing.

Typical uses include balanced professional-audio inputs, stereo audio interface boards, mixing-console preamplifier stages, test and measurement equipment, and communications front ends. The dual-channel configuration is particularly useful where two balanced signals must be conditioned consistently, while the 0 dB gain preserves the source signal level for later gain-control stages.

When laying out the receiver, treat the differential inputs as a matched, impedance-sensitive pair and keep their routing symmetrical. Place decoupling capacitors close to the supply pins and route the two channels consistently to minimize conversion of common-mode interference into differential error. Confirm the output swing against the voltage headroom of the following stage.

This page combines manufacturer specifications, a same-footprint replacement assessment, and application-oriented design guidance. The accompanying comparison and selection notes make it easier to choose between the documented INA2134 order variants without overlooking package lifecycle, channel alignment, or interface constraints.

드롭인 대체품: INA2134UAG4 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: INA2134UAG4 (동일 폼 팩터 및 풋프린트) — 차이점: Package, RoHS Status.

Texas Instruments
Package: 14-pin SOIC
RoHS Status: RoHS compliant
비교 대상: INA2134UAG4 →

INA2134UA

✅ 드롭인
Texas Instruments
📦 14-SOIC (0.154", 3.90mm Width)
Dual audio differential line receiver · 2 channels · 1 V/V (0 dB) · 0.0005% at 1 kHz · 14 V/µs · ±18 V · 2.9 mA maximum · 90 dB minimum

가격 문의

데이터시트 보기 →

INA2134UA/2K5E4

✅ 드롭인
📦 14-SOIC
Same dual-channel 1 V/V receiver architecture and 14-SOIC footprint; documented product status is obsolete and the order code differs.

📋 참조 대체품 (카탈로그에 없음)

INA2134UAG4 최대 정격 & 전기적 특성

Device Type Dual differential audio line receiver
Number of Channels 2 channels
Voltage Gain 1 V/V (0 dB)
Distortion at 1 kHz 0.0005%
Slew Rate 14 V/µs
Minimum Common-Mode Rejection 74 dB
Common-Mode Rejection Test Resistance 0 ohm
패키지 14-SOIC, 3.90 mm width
실장 유형 Surface mount
Integrated Precision Resistors Yes, on chip
Output Drive High output drive
Output Voltage Swing Wide output voltage swing
RoHS 상태 Compliant

INA2134UAG4 14-soic, 3.90 mm width 핀 구성 가이드

INA2134UAG4(14-soic, 3.90 mm width 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

INA2134UAG4의 14-soic, 3.90 mm width 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: INA2134UAG4.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

INA2134UAG4 적합 용도: 6 애플리케이션s: Balanced Professional Audio Input, Stereo Audio Interface, Mixer Preamplifier Input, Balanced Recording Preamp, Test and Measurement Front End, Communications Signal Conditioning.

🎧

Balanced Professional Audio Input

The INA2134UAG4 is well suited to converting a balanced professional-audio input into a single-ended signal for the next processing stage. Its 0 dB gain preserves the incoming level, while the documented 74 dB minimum common-mode rejection reduces interference that appears equally on both input conductors. The 0.0005% distortion at 1 kHz and 14 V/µs slew rate support low-error, responsive handling of audio waveforms. Use the device ahead of a gain-control or line-output stage, and verify that the downstream amplifier can accept the resulting output swing.

🎧

Stereo Audio Interface

The two independent INA2134UAG4 receiver channels support stereo balanced inputs without requiring two separate receiver packages. Both channels use the fixed 1 V/V gain characteristic and integrated precision resistors, which simplifies channel matching and reduces the number of external gain-setting components. This configuration is useful in stereo preamps, monitor controllers, and balanced audio interface cards. The low 0.0005% distortion figure at 1 kHz supports clean source conversion, while the 14 V/µs slew rate provides useful transient headroom before the next gain stage.

🎚️

Mixer Preamplifier Input

INA2134UAG4 can serve as the balanced input receiver ahead of a mixer preamplifier because it performs differential-to-single-ended conversion at 0 dB without adding substantial gain. The 74 dB minimum common-mode rejection helps suppress ground-potential differences and shared noise on balanced cable runs, while the 0.0005% distortion at 1 kHz limits added signal error. The 14 V/µs slew rate also helps the stage follow fast transients. Keep both input traces symmetric and confirm that the following mixer input has sufficient voltage headroom.

🎙️

Balanced Recording Preamp

For a balanced recording preamplifier, the INA2134UAG4 provides the input conversion stage without changing the nominal signal gain. Its 0 dB architecture lets the designer retain control over where gain is applied, which is useful when a downstream potentiometer, low-noise amplifier, or analog-to-digital converter interface determines the overall signal path. Low distortion of 0.0005% at 1 kHz supports transparent conversion, and the two channels allow consistent left and right routing. The receiver should be followed by circuitry designed for the expected signal level and output impedance.

🔧

Test and Measurement Front End

The INA2134UAG4 is useful in instrumentation front ends that receive balanced sensor or test signals and require a referenced single-ended output. The 0 dB gain preserves the measurement amplitude, and the common-mode rejection characteristic helps isolate the wanted differential component from shared noise. Its 14 V/µs slew rate supports signals with rapid transitions, while the low distortion specification makes it appropriate for high-fidelity test paths. For precision measurements, confirm input offset, input bias current, supply range, and output swing against the complete operating requirements.

🌐

Communications Signal Conditioning

INA2134UAG4 can condition a balanced communications signal when the downstream circuitry requires a single-ended result. The receiver’s unity gain prevents premature signal amplification, while its 74 dB minimum common-mode rejection improves discrimination against noise shared by the differential pair. The low 0.0005% distortion at 1 kHz and 14 V/µs slew rate provide a useful combination of linearity and dynamic response. Keep the input routing balanced, use an appropriate source termination, and verify the supply and common-mode limits before using the receiver outside audio-focused designs.

추천 제품 요약

INA2134UA Texas Instruments 사용처: Balanced Professional Audio Input, Stereo Audio Interface, Mixer Preamplifier Input, Balanced Recording Preamp, Test and Measurement Front End, Communications Signal Conditioning INA2134UA/2K5E4 Same-family dual differential receiver order variant 사용처: Balanced Professional Audio Input, Stereo Audio Interface, Mixer Preamplifier Input, Balanced Recording Preamp, Test and Measurement Front End, Communications Signal Conditioning
What is the INA2134UAG4?
The INA2134UAG4 is a dual-channel, unity-gain differential audio line receiver from Texas Instruments. It converts balanced differential inputs into single-ended outputs for professional audio and instrumentation systems. According to the manufacturer product page, the device uses high-performance operational amplifiers with on-chip precision resistors and is specified for 0.0005% distortion at 1 kHz and a 14 V/µs slew rate.
What is the voltage gain of INA2134UAG4?
The INA2134UAG4 has a voltage gain of 1 V/V, equivalent to 0 dB. This fixed unity gain lets the device perform balanced-to-single-ended conversion without changing the nominal signal level. The comparison documentation identifies the gain as 1 V/V, while the manufacturer describes the family as an audio differential line receiver with integrated precision resistors.
What are the key specifications of INA2134UAG4 that engineers should know?
The INA2134UAG4 combines two receiver channels, 0 dB gain, 0.0005% distortion at 1 kHz, a 14 V/µs slew rate, and at least 74 dB common-mode rejection in a 14-SOIC package. These specifications make the device appropriate for balanced audio interfaces where low distortion, fast transient response, and rejection of common-mode noise are the principal design requirements.
Where can I download the INA2134UAG4 datasheet PDF?
The official INA2134UAG4 datasheet is available through Texas Instruments at https://www.ti.com/lit/ds/symlink/ina134.pdf. The document covers the INA134 and INA2134 families and includes the circuit description, AC performance, application information, and package details. Use the pin-description and typical-application sections when assigning PCB connections and external components.
Where can I find the INA2134UAG4 pinout?
The INA2134UAG4 pin assignment is shown in the Texas Instruments manufacturer datasheet at https://www.ti.com/lit/ds/symlink/ina134.pdf. The component uses a 14-pin SOIC package with two differential receiver channels. Use the package drawing and pin-description table when assigning supply, input, output, and ground connections.
Is INA2134UAG4 suitable for professional audio equipment?
Yes, the INA2134UAG4 is specifically suited to high-performance audio signal paths. Texas Instruments specifies 0.0005% distortion at 1 kHz, a 14 V/µs slew rate, wide output swing, and high output drive. These characteristics allow balanced studio, stage, and installed audio inputs to feed subsequent gain-control or line-output stages while retaining low distortion and dynamic response.
What can replace the INA2134UAG4?
The documented same-family choice is INA2134UA, which retains the same electrical characteristics and 14-SOIC footprint but represents a different orderable package variant. The INA2134UA/2K5E4 is another documented 14-SOIC order variant. Verify lifecycle status and required packaging before substitution, because a same-footprint device does not necessarily share the same reel, tube, or inventory configuration.
Is the INA2134UA the same as the INA2134UAG4?
The INA2134UA and INA2134UAG4 are both Texas Instruments INA2134-family 14-SOIC dual differential receivers with the same stated electrical performance. Their documented order codes differ, and the comparison listing marks one as obsolete while identifying the other as RoHS-compliant. Confirm the required package form, lifecycle status, and manufacturer ordering details before replacing one with the other.
INA2134UAG4 vs INA134UA: which is better for a stereo audio interface?
Choose the INA2134UAG4 for a stereo interface that requires two integrated receiver channels in one 14-SOIC package. The INA134 belongs to a single-channel differential line-receiver family and therefore cannot reproduce the INA2134’s two-channel integration without adding another device. Both families are specified for low distortion, but channel count and board area are the decisive differences.
When should I choose INA2134UAG4 over a discrete op-amp receiver?
Choose INA2134UAG4 when the design needs a compact balanced-audio input stage with stable unity gain and minimal external matching. Integrated precision resistors simplify the receiver layout and preserve consistency between the two channels. A discrete approach may offer greater control over resistor selection and biasing, but it introduces more components and requires careful matching to control gain error and common-mode rejection.
Is INA2134UAG4 suitable for balanced mixer preamplifier inputs?
Yes, the INA2134UAG4 fits balanced mixer preamplifier inputs because its 0 dB gain preserves signal level, while its 74 dB minimum common-mode rejection helps suppress noise picked up equally on both conductors. Its 0.0005% distortion at 1 kHz and 14 V/µs slew rate support clean, responsive audio signal handling ahead of the mixer's gain-control stage.
What is the difference between INA2134UAG4 and INA2134UA/2K5E4?
The INA2134UAG4 and INA2134UA/2K5E4 are documented 14-SOIC members of the INA2134 family with the same dual-channel receiver architecture and stated gain of 1 V/V. Their order codes and documented product statuses differ: one comparison listing identifies INA2134UA/2K5E4 as obsolete, while the listing for INA2134UAG4 identifies RoHS compliance. Check the exact order code and lifecycle before substitution.
Where can I buy INA2134UAG4 online?
Use the Request a Quote form on this page to request the current INA2134UAG4 price, stock position, and lead time. The form is the appropriate commercial channel for this quote-oriented listing and allows the request to be matched to the exact 14-SOIC order code rather than a broader INA2134 family listing.
What is the price of INA2134UAG4?
Current pricing and quantity availability for INA2134UAG4 should be requested through the Request a Quote form on this page. The exact price can change with quantity, inventory, and lead time, so request a current quotation rather than relying on an archived unit-price observation for procurement.
What is the lead time and stock status for INA2134UAG4?
Request the current INA2134UAG4 lead time and stock status through the Request a Quote form on this page. The listing does not provide a guaranteed manufacturer lead-time commitment, and available inventory can change independently of the product lifecycle status.

엔지니어링 참조 데이터: INA2134UAG4 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose INA2134UAG4 for a new dual balanced-audio input stage when the design needs 0 dB conversion, two channels in one 14-SOIC package, low distortion, and active lifecycle support. Its integrated precision resistors simplify matching and reduce external components, while its 74 dB minimum common-mode rejection and 14 V/µs slew rate suit professional audio and instrumentation. INA2134UA is a viable footprint-compatible family alternative when its exact order, lifecycle, and procurement conditions are acceptable. Avoid selecting INA2134UA/2K5E4 for a new production program without an explicit lifecycle exception because the available comparison identifies it as obsolete. For a single-channel design, evaluate the INA134 family, but it does not provide the same two-channel integration and may require additional board area.

대체품과의 비교

파라미터 이 제품 INA2134UA INA2134UA/2K5E4
Brand Texas Instruments Texas Instruments Texas Instruments
Package 14-SOIC (0.154", 3.90mm Width) 14-SOIC - same footprint 14-SOIC - same footprint
Number of Channels 2 channels 2 channels 2 channels
Voltage Gain 1 V/V (0 dB) 1 V/V (0 dB) 1 V/V (0 dB)
Distortion at 1 kHz 0.0005% 0.0005% 0.0005%
Minimum Common-Mode Rejection 74 dB 74 dB 74 dB
Slew Rate 14 V/µs 14 V/µs 14 V/µs

주요 차별점

  • Dual balanced-audio receiver integration (vs INA134 family)
  • Fixed low-noise unity-gain conversion (vs INA2134UA)
  • Integrated precision gain-setting resistors (vs INA2134UA/2K5E4)

설계 노트

Route each differential pair as a tightly coupled, symmetric pair and keep the two input conductors over comparable ground-plane conditions. Unequal trace lengths or asymmetric impedance can allow external interference to become differential error. Place the receiver close to the connector or source when practical, and keep the output routing away from clocks, switching regulators, and other fast-edge nodes.

Confirm source impedance and termination strategy before finalizing the input network. The receiver’s integrated precision resistors establish the nominal gain, but external source resistance and cable termination still affect practical common-mode rejection and channel matching. Use identical input networks for both channels and avoid adding different series components unless the downstream signal architecture requires them.

Do not assume that a 14-SOIC footprint alone guarantees an interchangeable procurement item. Confirm the exact order code, package dimensions, pin assignment, lifecycle status, and required shipping format before replacing INA2134UAG4. The documented INA2134UA/2K5E4 comparison identifies an obsolete product status, so a footprint match alone is not sufficient for a new production design.

규정 준수 정보

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

RoHS compliance is identified in the INA2134UA versus INA2134UAG4 comparison. No verified statements were available for the other compliance categories.

데이터 검증일: 2026-11-19 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

INA2134UAG4 datasheet INA2134UAG4 pinout INA2134UAG4 datasheet pdf INA2134UAG4 equivalent INA2134UAG4 replacement INA2134UAG4 price INA2134UAG4 stock Texas Instruments INA2134UAG4 INA2134UAG4 14-SOIC INA2134UAG4 audio receiver INA2134UAG4 vs INA2134UA INA2134UAG4 0dB gain INA2134UAG4 common mode rejection INA2134UAG4 balanced audio input

관련 부품 & 용어

Texas Instruments INA2134UAG4 INA2134UA INA2134UA/2K5E4 INA134 differential audio line receiver operational amplifier precision resistor amplifier IC semiconductor balanced audio professional audio common-mode rejection ratio CMRR slew rate voltage gain 0 dB 14-SOIC SOIC family surface mount SMD signal conditioning differential-to-single-ended conversion distortion RoHS
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기