Texas Instruments

INA250A3PW - 36V Bidirectional Current Sense Amplifier | TI

부품 번호: INA250A3PW ✓ 활성
2.7 V to 36 V Vdss 15 A Id 50 mΩ Rds(on) TSSOP-16 (PW) Package
MOQ: 1 |

INA250A3PW 개요

Texas Instruments INA250A3PW is a bidirectional precision current-sense amplifier with an integrated shunt resistor, 100 V/V gain, and operation from a 2.7 V to 36 V supply. The device measures low- and high-side current across common-mode voltages from 0 V to 36 V and is housed in a 16-pin TSSOP package. Its voltage output supports direct connection to analog-to-digital converters, controllers, and monitoring systems.

A current-sense amplifier converts the voltage generated across a shunt resistor into a proportional, measurable voltage. This integrated-resistor implementation belongs to the current-shunt monitor class within precision amplifier and power-management ICs. By placing the shunt inside the amplifier package, it removes the need for a separate precision shunt while reducing layout sensitivity associated with external Kelvin connections.

The INA250A3PW provides a gain of 100 V/V, allowing the 50 mΩ integrated shunt to support current measurements up to 15 A according to the family specifications. Bidirectional operation measures positive or negative current, and an external reference can establish the output operating point for zero-current offset or bipolar reporting. A 2.7 V minimum supply permits use in low-voltage systems while the 36 V supply rating supports higher-voltage industrial buses.

The INA250 family specifies a maximum supply current of 300 µA and operation from -40 °C to 125 °C. Its integrated shunt and Kelvin-connected internal structure improve measurement accuracy by reducing lead and trace resistance effects. The voltage-output architecture requires downstream filtering and input/output stability capacitors selected according to the manufacturer datasheet, rather than relying on an internal shunt resistor placed outside the package.

Typical applications include motor and solenoid current monitoring, power-supply telemetry, battery-pack management, industrial control systems, and high-side or low-side protection. The device can monitor current in systems whose supply voltage changes independently of the sensed common-mode voltage, making it useful in 24 V industrial equipment, automotive-style loads, and distributed power architectures.

Design layouts should keep the power path short and use solid copper planes so that shunt heat is distributed rather than concentrated in a narrow trace. Confirm output saturation, reference-pin behavior, common-mode limits, and filter-component values against the manufacturer datasheet before operating at the 15 A family limit.

This page combines device specifications, application guidance, pin and package considerations, lifecycle information, and verified replacement analysis. It also distinguishes electrically similar family members from true pin-compatible drop-in choices so that PCB reuse decisions are based on measurable electrical differences rather than package similarity alone.

드롭인 대체품: INA250A3PW — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 제품에는 사용 가능한 드롭인 대체품이 없습니다.

대체품 요청

INA250A3PW 최대 정격 & 전기적 특성

Product Type Bidirectional current-sense amplifier with integrated shunt resistor
Supply Voltage Range 2.7 V to 36 V
Common-Mode Voltage Range 0 V to 36 V
Gain 100 V/V
Integrated Shunt Resistance 50 mΩ
Maximum Current Sense Range 15 A
Maximum Supply Current 300 µA
출력 유형 Voltage output
Bidirectional Current Sensing Supported for positive and negative current
External Reference Support Supported
동작 온도 범위 -40 °C to 125 °C
패키지 TSSOP-16 (PW)
핀 수 16 pins
실장 유형 Surface mount

INA250A3PW tssop-16 (pw) 핀 구성 가이드

INA250A3PW(tssop-16 (pw) 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

INA250A3PW의 tssop-16 (pw) 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: INA250A3PW.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

INA250A3PW 적합 용도: 6 애플리케이션s: 24 V Industrial Load Monitoring, Motor and Solenoid Current Control, Battery Pack Telemetry, Server and Data-Center Power Rails, Automotive Electrical Load Sensing, Power Supply Protection and Telemetry.

🏭

24 V Industrial Load Monitoring

The INA250A3PW fits 24 V industrial load monitoring because its common-mode range extends from 0 V to 36 V while the supply can operate from 2.7 V to 36 V. Place the integrated shunt in the high-side or low-side power path and route the 100 V/V voltage output toward a controller ADC. A 1 A current produces approximately a 5 mV output change, improving observability without an external precision shunt. The principal trade-off is output headroom: a large bidirectional current range or high reference voltage can cause saturation, so verify the zero-current output point and maximum expected excursion before finalizing the analog front end.

⚡

Motor and Solenoid Current Control

The INA250A3PW is useful for closed-loop motor and solenoid current control because it measures current bidirectionally at common-mode voltages up to 36 V. Its 100 V/V gain converts the internal 50 mΩ shunt voltage into a compact analog signal suitable for a control ADC. The integrated shunt removes the external shunt footprint and reduces the number of high-current connections that must be routed precisely. Engineers should account for inductive transients, shunt heating at peak motor current, and the amplifier’s output-voltage range. A filtered ADC input and an appropriate reference voltage can improve resolution around a zero-current or controlled operating point.

🔋

Battery Pack Telemetry

The INA250A3PW supports battery-pack telemetry where charge or discharge current must be measured across a changing common-mode voltage. Its 0 V to 36 V common-mode range permits monitoring inside multi-cell systems, while the 2.7 V minimum supply supports low-power control electronics. The fixed 100 V/V gain gives a predictable 5 mV-per-ampere response around the selected reference, which can be calibrated by the system controller. Bidirectional capability helps distinguish charging from load current. Protection components must handle switching spikes and the maximum battery voltage, and the PCB must provide adequate copper area to dissipate heat from the integrated 50 mΩ shunt.

🖥️

Server and Data-Center Power Rails

The INA250A3PW can monitor intermediate power rails in server or data-center power systems where fast current feedback improves fault detection. Its 100 V/V gain produces a useful signal from small current changes, and the integrated shunt keeps the sensing element within the same package as the amplifier electronics. The 2.7 V to 36 V supply range allows operation from low-voltage auxiliary rails while measuring a higher common-mode power path. Because the output is analog, the receiving ADC should provide sufficient resolution and sampling rate. Designers should verify quiescent-current impact, output settling behavior, reference accuracy, and the temperature rise associated with continuous current near the family rating.

🚗

Automotive Electrical Load Sensing

The INA250A3PW is technically suited to low-voltage automotive load sensing because it supports bidirectional measurement, a 36 V maximum common-mode voltage, and operation across -40 °C to 125 °C. These characteristics allow it to monitor loads near a vehicle battery when the electrical environment is otherwise compatible. Its 100 V/V gain and integrated shunt can simplify current-channel implementation compared with a discrete shunt and instrumentation amplifier. Automotive deployment still requires review of transient protection, ISO 7637-related system behavior, electromagnetic compatibility, and any AEC-Q100 qualification requirement. Those qualification and compliance conditions are not established by the product listing and should be confirmed with the manufacturer before release.

🔌

Power Supply Protection and Telemetry

The INA250A3PW supports power-supply protection and telemetry by continuously measuring current through its integrated 50 mΩ shunt. The 100 V/V gain creates a signal proportional to load current without requiring an external shunt in the power path, while bidirectional sensing can identify reverse current or regeneration. A controller can compare the converted voltage with programmed thresholds for overload indication or system telemetry. The designer must ensure that the amplifier supply remains available during fault conditions and that the output cannot saturate before the protection threshold is reached. PCB copper width and thermal design are particularly important because the shunt dissipates current-squared power continuously.

What is the operating voltage range of INA250A3PW?
The INA250A3PW operates from a 2.7 V to 36 V supply. According to the Texas Instruments INA250 datasheet, its measured common-mode range is independently specified from 0 V to 36 V, allowing the amplifier to monitor current in supply and return paths whose voltage can vary substantially. This separation makes the device suitable for both low-voltage electronics and industrial power systems. Confirm the output, reference, and supply pins against the pin-description table before layout.
What is the current-sense gain of INA250A3PW?
The INA250A3PW has a fixed gain of 100 V/V. According to the Texas Instruments INA250 datasheet, the device uses a 50 mΩ integrated shunt, so the nominal output response is 5 mV per ampere of sensed current. Bidirectional operation allows positive and negative current to be represented around the externally selected reference voltage. Designers should also verify output headroom and saturation limits for the intended bidirectional measurement range.
What is the maximum measurable current of INA250A3PW?
The INA250A3PW family specification supports current measurements up to 15 A using its 50 mΩ integrated shunt. According to the Texas Instruments INA250 datasheet, the A3 gain option is 100 V/V, producing approximately 5 mV of output change per ampere. The practical operating limit still depends on shunt power dissipation, ambient temperature, PCB copper area, output headroom, and the selected reference voltage.
Where can I download the INA250A3PW datasheet PDF?
The official INA250A3PW datasheet PDF is available from Texas Instruments at the manufacturer datasheet link on this page. The document contains the device description, gain options, electrical characteristics, pin configuration, typical application circuit, and guidance for external capacitors and reference voltage. Use the manufacturer document rather than an unofficial mirror when establishing design limits, test conditions, and PCB implementation details.
Where can I find the INA250A3PW pinout?
The INA250A3PW pin configuration is identified in the pin-configuration section of the Texas Instruments INA250 datasheet. The device is a 16-pin TSSOP and includes supply, ground, input, output, and reference-related connections. Assign PCB nets from that table rather than inferring functions from neighboring parts in the INA250 family. This is especially important because gain and package options can share the same family documentation.
Can INA250A3PW measure bidirectional current?
Yes, the INA250A3PW supports bidirectional current measurement and has a voltage-output architecture. According to the Texas Instruments INA250 datasheet, an external reference can be used to define the output level at zero current, allowing negative and positive current to be distinguished around that reference. Choose the reference voltage so the expected positive and negative output excursions remain within the amplifier’s output-voltage range.
What is the difference between INA250A3PW and INA250A1PW?
The principal functional difference is gain: INA250A3PW provides 100 V/V, while INA250A1PW provides 20 V/V. Both are members of the INA250 family and use the same TSSOP-16 device organization, but changing gain alters output sensitivity by a factor of five. The INA250A3PW therefore provides a larger output signal per ampere, while the INA250A1PW requires more downstream gain to reach a comparable voltage.
What is the difference between INA250A3PW and INA250A4PW?
The INA250A3PW has a gain of 100 V/V, while the INA250A4PW has a gain of 200 V/V. According to the Texas Instruments INA250 family information, both variants are bidirectional voltage-output current-sense amplifiers using an integrated shunt and a 16-pin TSSOP package. The A4 option doubles output sensitivity but reduces output-voltage headroom, so it is not an electrical drop-in choice when the existing board expects the A3 transfer function.
INA250A3PW vs INA250A4PW: which is better for low-current sensing?
The INA250A3PW is generally more suitable when system current is low and signal headroom is important because its 100 V/V gain produces half the output change of the 200 V/V INA250A4PW for the same current. The A4 version offers greater sensitivity but can reach its output limits sooner. Final suitability depends on the expected bidirectional current range, reference voltage, supply voltage, and ADC input range.
When should I choose INA250A3PW instead of INA250A1PW?
Choose INA250A3PW when you need approximately 5 mV of output change per ampere instead of the 1 mV per ampere associated with the 20 V/V INA250A1PW. The higher A3 gain can improve measurement resolution and reduce the gain required from a following ADC or instrumentation amplifier. Choose A1 instead when maximum output swing, lower sensitivity, or a different existing-board transfer function is more important.
Is INA250A3PW suitable for 24 V industrial current monitoring?
The INA250A3PW is suitable for 24 V industrial current monitoring because its common-mode input range extends from 0 V to 36 V and its supply rating reaches 36 V. According to the Texas Instruments INA250 datasheet, the measured current range is independent of the supply voltage, allowing high-side or low-side monitoring in a 24 V bus. The power system still needs correct transient protection, grounding, filtering, and PCB layout.
What can replace INA250A3PW on the same PCB?
A genuine replacement must preserve the 16-pin TSSOP footprint, pin functions, 100 V/V transfer function, and critical electrical limits. Other INA250 gain versions can share the package but may change output sensitivity by factors such as 2, 5, or 4, so package similarity alone does not make them drop-in replacements. Use the Request a Quote form on this page for current sourcing of the exact INA250A3PW rather than accepting an unchecked substitute.
Is there a cross-brand drop-in equivalent for INA250A3PW?
No cross-brand drop-in equivalent is established by the available component information. An equivalent must match the 16-pin TSSOP pinout, 100 V/V gain, integrated 50 mΩ shunt, bidirectional behavior, supply range, and common-mode range. A device that uses an external shunt or has different gain may require PCB and firmware changes. Request a quote for the exact part and consult the manufacturer pinout before considering any board-level redesign.
What are the key specifications of INA250A3PW that engineers should know?
The INA250A3PW combines a 2.7 V to 36 V supply, a 0 V to 36 V common-mode range, 100 V/V gain, a 50 mΩ integrated shunt, and a 15 A family current rating. According to the Texas Instruments INA250 datasheet, maximum supply current is 300 µA and the extended temperature range is -40 °C to 125 °C. Its 16-pin TSSOP package also provides a defined surface-mount footprint for industrial and power-monitoring designs.
Where to buy INA250A3PW online and what is its lead time?
Use the Request a Quote form on this page to request INA250A3PW availability, current lead time, and order quantities from XAIPART. The manufacturer product page identifies INA250A3PW as an active orderable member of the INA250 family in a 16-pin TSSOP package. Purchase-specific stock and scheduling should be confirmed through the quote process rather than inferred from general catalog availability.
What is the price and stock status of INA250A3PW?
The current INA250A3PW price, stock quantity, and scheduled lead time are handled through the Request a Quote form on this page. Texas Instruments identifies the device as an orderable 36 V bidirectional current-sense amplifier with an integrated shunt resistor. For production planning, include your required quantity, date code preference, and shipping destination so the quote can reflect an actionable supply commitment.

엔지니어링 참조 데이터: INA250A3PW — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the INA250A3PW when the design needs a bidirectional current measurement with a 100 V/V transfer function, a 50 mΩ integrated shunt, and operation across a 0 V to 36 V common-mode range. It is especially useful when avoiding an external shunt and its Kelvin routing is important. The INA250A1PW is preferable when lower output sensitivity and greater voltage headroom are desired, while the INA250A4PW offers twice the sensitivity but requires more output-range margin. The INA240A3DR is useful when an external shunt is already part of the board or must be selected independently, but it is not a footprint-identical replacement. No alternative should be substituted without checking gain, pin functions, common-mode limits, output saturation, thermal performance, and calibration constants.

대체품과의 비교

파라미터 이 제품
Package TSSOP-16 (PW)
Brand Texas Instruments
Supply Voltage Range 2.7 V to 36 V
Common-Mode Voltage Range 0 V to 36 V
Gain 100 V/V
Integrated Shunt Resistance 50 mΩ
Maximum Current Sense Range 15 A
Maximum Supply Current 300 µA
Bidirectional Sensing Supported
Operating Temperature Range -40 °C to 125 °C

주요 차별점

  • Higher current sensitivity than the 20 V/V INA250A1PW (vs INA250A1PW)
  • Lower gain than INA250A4PW preserves more output headroom (vs INA250A4PW)
  • Integrated 50 mΩ shunt reduces external sensing footprint (vs INA240A3DR)

설계 노트

Estimated: using a 50 mΩ shunt at 10 A continuous, shunt dissipation is I²R = 10² × 0.05 = 5 W. Route the measured current through broad copper areas and both exposed-package thermal pathways where applicable, then verify the temperature rise on the assembled PCB. Do not assume the 15 A family rating is a safe continuous operating point without checking package limits, ambient temperature, copper geometry, and the resulting junction temperature.

Place the power-path connections so current enters and leaves the integrated shunt through low-impedance copper rather than thin point-to-point traces. Keep the supply, ground, output, and reference routing short, and connect the analog ground return without sharing a narrow path with the high-current conductor. Follow the manufacturer’s recommended capacitor types and placement because incorrect ESR, capacitance, or placement can affect output stability and measurement response.

Do not treat different INA250 gain options as automatic drop-in replacements. INA250A3PW provides 100 V/V, so changing to a 20 V/V, 50 V/V, 200 V/V, or 400 V/V option changes the output-per-ampere relationship and may exceed the available output-voltage range. Also account for bidirectional offset relative to the reference pin. Recalculate the ADC scaling, saturation margin, zero-current output, and protection thresholds whenever the gain version or reference voltage changes.

The analog output can pick up switching noise if the power stage and sense channel share poorly controlled return paths. Place the output filtering network close to the receiving ADC, use a stable low-noise reference for the reference pin, and keep the analog trace away from high-di/dt switching nodes. Validate filter corner frequencies against the control-loop bandwidth; excessive filtering may slow current detection, while insufficient filtering can expose the measurement to supply ripple and converter switching artifacts.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The available product information does not establish the requested compliance statuses. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals requirements with the manufacturer before production release.

관련 검색

INA250A3PW datasheet INA250A3PW pinout INA250A3PW datasheet pdf INA250A3PW equivalent INA250A3PW replacement INA250A3PW cross reference INA250A3PW vs INA250A4PW INA250A3PW vs INA250A1PW INA250A3PW price INA250A3PW stock Texas Instruments INA250A3PW INA250A3PW 100V/V current sense INA250A3PW TSSOP-16 pinout INA250A3PW application circuit

관련 부품 & 용어

Texas Instruments INA250A3PW INA250A1PW INA250A4PW INA240A3DR INA240A1PW current-sense amplifier current-shunt monitor precision amplifier amplifier IC power-management IC bidirectional current sensing integrated shunt resistor common-mode voltage supply voltage voltage output external reference gain output noise offset error gain error TSSOP-16 TSSOP package family surface-mount package SMD
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기