INA250A3PW - 36V Bidirectional Current Sense Amplifier | TI
MPN: INA250A3PW ✓ Hoạt độngINA250A3PW Tóm tắt
A current-sense amplifier converts the voltage generated across a shunt resistor into a proportional, measurable voltage. This integrated-resistor implementation belongs to the current-shunt monitor class within precision amplifier and power-management ICs. By placing the shunt inside the amplifier package, it removes the need for a separate precision shunt while reducing layout sensitivity associated with external Kelvin connections.
The INA250A3PW provides a gain of 100 V/V, allowing the 50 mΩ integrated shunt to support current measurements up to 15 A according to the family specifications. Bidirectional operation measures positive or negative current, and an external reference can establish the output operating point for zero-current offset or bipolar reporting. A 2.7 V minimum supply permits use in low-voltage systems while the 36 V supply rating supports higher-voltage industrial buses.
The INA250 family specifies a maximum supply current of 300 µA and operation from -40 °C to 125 °C. Its integrated shunt and Kelvin-connected internal structure improve measurement accuracy by reducing lead and trace resistance effects. The voltage-output architecture requires downstream filtering and input/output stability capacitors selected according to the manufacturer datasheet, rather than relying on an internal shunt resistor placed outside the package.
Typical applications include motor and solenoid current monitoring, power-supply telemetry, battery-pack management, industrial control systems, and high-side or low-side protection. The device can monitor current in systems whose supply voltage changes independently of the sensed common-mode voltage, making it useful in 24 V industrial equipment, automotive-style loads, and distributed power architectures.
Design layouts should keep the power path short and use solid copper planes so that shunt heat is distributed rather than concentrated in a narrow trace. Confirm output saturation, reference-pin behavior, common-mode limits, and filter-component values against the manufacturer datasheet before operating at the 15 A family limit.
This page combines device specifications, application guidance, pin and package considerations, lifecycle information, and verified replacement analysis. It also distinguishes electrically similar family members from true pin-compatible drop-in choices so that PCB reuse decisions are based on measurable electrical differences rather than package similarity alone.
Bộ thay thế dễ dàng lắp đặt cho INA250A3PW — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếINA250A3PW Tỷ lệ tối đa & tính chất điện
| Product Type | Bidirectional current-sense amplifier with integrated shunt resistor |
| Supply Voltage Range | 2.7 V to 36 V |
| Common-Mode Voltage Range | 0 V to 36 V |
| Gain | 100 V/V |
| Integrated Shunt Resistance | 50 mΩ |
| Maximum Current Sense Range | 15 A |
| Maximum Supply Current | 300 µA |
| Kiểu đầu ra | Voltage output |
| Bidirectional Current Sensing | Supported for positive and negative current |
| External Reference Support | Supported |
| Khoảng nhiệt độ hoạt động | -40 °C to 125 °C |
| Hộp | TSSOP-16 (PW) |
| Số chân | 16 pins |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân INA250A3PW tssop-16 (pw)
Cấu hình chân cho INA250A3PW (tssop-16 (pw) gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho INA250A3PW.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
INA250A3PW phù hợp cho 6 Áp dụngs: 24 V Industrial Load Monitoring, Motor and Solenoid Current Control, Battery Pack Telemetry, Server and Data-Center Power Rails, Automotive Electrical Load Sensing, Power Supply Protection and Telemetry.
24 V Industrial Load Monitoring
The INA250A3PW fits 24 V industrial load monitoring because its common-mode range extends from 0 V to 36 V while the supply can operate from 2.7 V to 36 V. Place the integrated shunt in the high-side or low-side power path and route the 100 V/V voltage output toward a controller ADC. A 1 A current produces approximately a 5 mV output change, improving observability without an external precision shunt. The principal trade-off is output headroom: a large bidirectional current range or high reference voltage can cause saturation, so verify the zero-current output point and maximum expected excursion before finalizing the analog front end.
Được đề xuất
Motor and Solenoid Current Control
The INA250A3PW is useful for closed-loop motor and solenoid current control because it measures current bidirectionally at common-mode voltages up to 36 V. Its 100 V/V gain converts the internal 50 mΩ shunt voltage into a compact analog signal suitable for a control ADC. The integrated shunt removes the external shunt footprint and reduces the number of high-current connections that must be routed precisely. Engineers should account for inductive transients, shunt heating at peak motor current, and the amplifier’s output-voltage range. A filtered ADC input and an appropriate reference voltage can improve resolution around a zero-current or controlled operating point.
Được đề xuất
Battery Pack Telemetry
The INA250A3PW supports battery-pack telemetry where charge or discharge current must be measured across a changing common-mode voltage. Its 0 V to 36 V common-mode range permits monitoring inside multi-cell systems, while the 2.7 V minimum supply supports low-power control electronics. The fixed 100 V/V gain gives a predictable 5 mV-per-ampere response around the selected reference, which can be calibrated by the system controller. Bidirectional capability helps distinguish charging from load current. Protection components must handle switching spikes and the maximum battery voltage, and the PCB must provide adequate copper area to dissipate heat from the integrated 50 mΩ shunt.
Được đề xuất
Server and Data-Center Power Rails
The INA250A3PW can monitor intermediate power rails in server or data-center power systems where fast current feedback improves fault detection. Its 100 V/V gain produces a useful signal from small current changes, and the integrated shunt keeps the sensing element within the same package as the amplifier electronics. The 2.7 V to 36 V supply range allows operation from low-voltage auxiliary rails while measuring a higher common-mode power path. Because the output is analog, the receiving ADC should provide sufficient resolution and sampling rate. Designers should verify quiescent-current impact, output settling behavior, reference accuracy, and the temperature rise associated with continuous current near the family rating.
Được đề xuất
Automotive Electrical Load Sensing
The INA250A3PW is technically suited to low-voltage automotive load sensing because it supports bidirectional measurement, a 36 V maximum common-mode voltage, and operation across -40 °C to 125 °C. These characteristics allow it to monitor loads near a vehicle battery when the electrical environment is otherwise compatible. Its 100 V/V gain and integrated shunt can simplify current-channel implementation compared with a discrete shunt and instrumentation amplifier. Automotive deployment still requires review of transient protection, ISO 7637-related system behavior, electromagnetic compatibility, and any AEC-Q100 qualification requirement. Those qualification and compliance conditions are not established by the product listing and should be confirmed with the manufacturer before release.
Được đề xuất
Power Supply Protection and Telemetry
The INA250A3PW supports power-supply protection and telemetry by continuously measuring current through its integrated 50 mΩ shunt. The 100 V/V gain creates a signal proportional to load current without requiring an external shunt in the power path, while bidirectional sensing can identify reverse current or regeneration. A controller can compare the converted voltage with programmed thresholds for overload indication or system telemetry. The designer must ensure that the amplifier supply remains available during fault conditions and that the output cannot saturate before the protection threshold is reached. PCB copper width and thermal design are particularly important because the shunt dissipates current-squared power continuously.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho INA250A3PW — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Package | TSSOP-16 (PW) |
| Brand | Texas Instruments |
| Supply Voltage Range | 2.7 V to 36 V |
| Common-Mode Voltage Range | 0 V to 36 V |
| Gain | 100 V/V |
| Integrated Shunt Resistance | 50 mΩ |
| Maximum Current Sense Range | 15 A |
| Maximum Supply Current | 300 µA |
| Bidirectional Sensing | Supported |
| Operating Temperature Range | -40 °C to 125 °C |
Bảo phân biệt quan trọng
- Higher current sensitivity than the 20 V/V INA250A1PW (vsINA250A1PW)
- Lower gain than INA250A4PW preserves more output headroom (vsINA250A4PW)
- Integrated 50 mΩ shunt reduces external sensing footprint (vsINA240A3DR)
Ghi chú thiết kế
Estimated: using a 50 mΩ shunt at 10 A continuous, shunt dissipation is I²R = 10² × 0.05 = 5 W. Route the measured current through broad copper areas and both exposed-package thermal pathways where applicable, then verify the temperature rise on the assembled PCB. Do not assume the 15 A family rating is a safe continuous operating point without checking package limits, ambient temperature, copper geometry, and the resulting junction temperature.
Place the power-path connections so current enters and leaves the integrated shunt through low-impedance copper rather than thin point-to-point traces. Keep the supply, ground, output, and reference routing short, and connect the analog ground return without sharing a narrow path with the high-current conductor. Follow the manufacturer’s recommended capacitor types and placement because incorrect ESR, capacitance, or placement can affect output stability and measurement response.
Do not treat different INA250 gain options as automatic drop-in replacements. INA250A3PW provides 100 V/V, so changing to a 20 V/V, 50 V/V, 200 V/V, or 400 V/V option changes the output-per-ampere relationship and may exceed the available output-voltage range. Also account for bidirectional offset relative to the reference pin. Recalculate the ADC scaling, saturation margin, zero-current output, and protection thresholds whenever the gain version or reference voltage changes.
The analog output can pick up switching noise if the power stage and sense channel share poorly controlled return paths. Place the output filtering network close to the receiving ADC, use a stable low-noise reference for the reference pin, and keep the analog trace away from high-di/dt switching nodes. Validate filter corner frequencies against the control-loop bandwidth; excessive filtering may slow current detection, while insufficient filtering can expose the measurement to supply ripple and converter switching artifacts.
Thông tin tuân thủ
The available product information does not establish the requested compliance statuses. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals requirements with the manufacturer before production release.