JN5179/001Z - 512KB Flash ZigBee 3.0 Wireless MCU | NXP
부품 번호: JN5179/001Z ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $4.25 | $4.25 |
| 10 | $3.8 | $38.00 |
| 100 | $3.35 | $335.00 |
| 500 | $2.95 | $1,475.00 |
| 1,000 | $2.6 | $2,600.00 |
| 3,000 | $2.25 | $6,750.00 |
JN5179/001Z 개요
A wireless microcontroller (wireless MCU) is a single-die System-on-Chip that combines an MCU core, on-chip non-volatile memory, RF transceiver, and baseband/MAC accelerators. It sits inside the IoT/connectivity hierarchy: wireless MCU -> RF transceiver + microcontroller -> SoC -> semiconductor. By collapsing PHY + MAC + application CPU + memory into one device, the JN5179/001Z eliminates external radio chips and lets engineers run a Thread/ZigBee stack directly on the same die that runs application logic.
Key features include the ARM Cortex-M3 core with programmable clock speeds for active and sleep modes, +10 dBm output power with on-chip PA, -96.5 dBm receiver sensitivity for link-budget headroom in indoor mesh networks, 512 kB embedded Flash for full ZigBee 3.0 / Thread stack plus application code, and hardware AES-128 accelerators for secure commissioning. The 4 kB EEPROM simplifies persistent network parameter storage (channel, PAN ID, security keys).
Architecturally, the JN5179/001Z uses a single-die 2.4 GHz radio with a dedicated IEEE 802.15.4 baseband, a Cortex-M3 core running up to 32 MHz, and integrated DC-DC and LDO blocks that keep deep-sleep current in the microamp range. This combination lets battery-powered nodes run for years on two AA cells when firmware is written with sleep-friendly APIs.
Typical applications include ZigBee 3.0 Smart Home lighting (bulbs, switches, dimmers, occupancy sensors), Thread border routers and Matter-over-Thread endpoints, ZigBee Smart Energy thermostats, and industrial 802.15.4 mesh sensors. Designers favour the JN5179 because NXP provides a certified ZigBee 3.0 stack plus reference designs, shortening time-to-market.
When designing with this part, allocate the 512 kB Flash carefully between NXP's ZigBee stack (~250 kB typical) and application code. Decouple AVDD/DVDD/PAVDD pins individually per the datasheet, and use a pi-network antenna match for the differential RFIO port. The /001Z suffix denotes tape-and-reel packing (1,000 per reel), MSL-3 handling required.
This page synthesises distributor pricing, same-brand NXP drop-in alternatives (JN5189/88T, JN5179-001-M13Z), and practical RF/antenna design notes that go beyond the datasheet alone.
드롭인 대체품: JN5179/001Z — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: JN5179/001Z (동일 폼 팩터 및 풋프린트) — 차이점: Frequency Band, Mounting Type, Package, Product Type, Protocol.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
JN5179-001-M13Z
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
JN5179/001
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
JN5178/001Z
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
JN5174/001Z
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
JN5189/001Z
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
JN5179/001Z 최대 정격 & 전기적 특성
| Product Type | RF Transceiver + MCU (Wireless MCU) |
| Protocol | IEEE 802.15.4 / ZigBee 3.0 / Thread |
| Frequency Band | 2.4 GHz to 2.485 GHz (ISM) |
| CPU Core | ARM Cortex-M3 |
| Flash Memory | 512 kB |
| RAM | 32 kB |
| EEPROM | 4 kB |
| TX Output Power | +10 dBm (max) |
| RX Sensitivity | -96.5 dBm |
| 패키지 | 40-pin HVQFN (QFN-40) Exposed Pad |
| 실장 유형 | Surface Mount (SMD) |
| Packaging | Tape & Reel, 1,000 per reel |
| MSL 레벨 | 3 |
| Peak Reflow Temperature | 260 C |
| RoHS 상태 | Compliant |
| Series | JN517X (variants: JN5174, JN5178, JN5179) |
JN5179/001Z 핀 구성
| 핀 1 | ANT — Differential RF I/O to antenna matching network |
| 핀 2 | RFIO_P — Positive differential RF port |
| 핀 3 | GND — Ground |
| 핀 4 | VDDPA — PA supply voltage |
| 핀 5 | AVDD — Analog supply voltage |
| 핀 6 | VCC — Core 1.2 V (internally regulated) |
| 핀 7 | GND — Ground |
| 핀 8 | VCC_RF — RF supply voltage |
| 핀 9 | GND — Ground |
| 핀 10 | VDD — I/O supply 1.8 V to 3.6 V |
| 핀 11 | GND — Ground |
| 핀 12 | RESETn — Active-low reset input |
| 핀 13 | JTMS — JTAG test mode select |
| 핀 14 | JTCK — JTAG test clock |
| 핀 15 | JTDI — JTAG test data input |
| 핀 16 | JTDO — JTAG test data output |
| 핀 17 | GND — Ground |
| 핀 18 | P0_0 — GPIO / DIO (digital I/O) |
| 핀 19 | P0_1 — GPIO / DIO |
| 핀 20 | P0_2 — GPIO / DIO |
| 핀 21 | P0_3 — GPIO / DIO |
| 핀 22 | P0_4 — GPIO / DIO / ADC input |
| 핀 23 | P0_5 — GPIO / DIO / ADC input |
| 핀 24 | P0_6 — GPIO / DIO |
| 핀 25 | P0_7 — GPIO / DIO |
| 핀 26 | P1_0 — GPIO / DIO |
| 핀 27 | P1_1 — GPIO / DIO |
| 핀 28 | P1_2 — GPIO / DIO |
| 핀 29 | P1_3 — GPIO / DIO |
| 핀 30 | P1_4 — GPIO / DIO |
| 핀 31 | P1_5 — GPIO / DIO |
| 핀 32 | P1_6 — GPIO / DIO |
| 핀 33 | P1_7 — GPIO / DIO |
| 핀 34 | P2_0 — GPIO / DIO / peripheral function |
| 핀 35 | P2_1 — GPIO / DIO / peripheral function |
| 핀 36 | P2_2 — GPIO / DIO / peripheral function |
| 핀 37 | P2_3 — GPIO / DIO / peripheral function |
| 핀 38 | GND — Ground |
| 핀 39 | VDD — I/O supply 1.8 V to 3.6 V |
| 핀 40 | NC — Not connected (per datasheet); also serves as exposed thermal pad land |
일반적인 애플리케이션
JN5179/001Z 적합 용도: 6 애플리케이션s: ZigBee 3.0 Smart Lighting Bulbs, Thread / Matter-over-Thread Endpoints, ZigBee Smart Energy Thermostats, Industrial 802.15.4 Mesh Sensors, Wireless Battery-Connected Switches, ZigBee Range Extenders / Repeaters.
ZigBee 3.0 Smart Lighting Bulbs
The NXP JN5179/001Z fits ZigBee 3.0 Smart Lighting bulbs because its +10 dBm TX power provides link-budget headroom for the bulb inside a metal socket, while its -96.5 dBm RX sensitivity captures weak commissioning packets from a remote bridge. The 512 kB Flash holds NXP's certified ZigBee 3.0 stack plus dimming/firmware-over-the-air logic, and the 4 kB EEPROM stores the ZigBee NWK key persistently across power cycles. Compared to a discrete MCU + radio solution, the JN5179/001Z shrinks BOM and lets the bulb wake on a button-press or ZigBee cluster command while drawing single-digit microamps in deep sleep. The 40-pin HVQFN exposed pad also dissipates heat from the integrated PA efficiently at full TX.
추천
Thread / Matter-over-Thread Endpoints
The NXP JN5179/001Z is widely used in Thread Border Router endpoints and early Matter-over-Thread devices because its ARM Cortex-M3 core runs the OpenThread stack plus application code within the 512 kB Flash budget. The 2.4 GHz IEEE 802.15.4 radio provides native Thread compatibility, and the 4 kB EEPROM stores the Thread Network Key and Mesh-Local EID prefixes. For Matter-over-Thread designers, the JN5179's hardware AES-128 accelerator speeds commissioning, while the -96.5 dBm sensitivity supports large multi-node Thread meshes. Engineers preferring ongoing software support should evaluate the JN5189 successor (Cortex-M4, larger memory) for new designs.
추천
ZigBee Smart Energy Thermostats
The NXP JN5179/001Z is suitable for ZigBee Smart Energy thermostats and HVAC controllers where the +10 dBm output power guarantees reliable mesh relay through walls, and the -96.5 dBm RX sensitivity maintains the link back to the energy gateway. The 512 kB Flash holds the SE 1.x stack plus thermostat scheduling logic, while the 32 kB RAM supports concurrent screen UI and ZigBee stack buffers. The hardware AES-128 accelerator accelerates the Smart Energy key establishment. Compared to a Wi-Fi-only thermostat, the ZigBee mesh topology means each JN5179/001Z node extends the network, reducing gateway count.
추천
Industrial 802.15.4 Mesh Sensors
The NXP JN5179/001Z enables industrial-grade 802.15.4 mesh sensors for condition monitoring, leak detection, and predictive maintenance in factories. The -96.5 dBm RX sensitivity supports long-range links across factory floors, while the integrated PA delivers +10 dBm for the reverse path. The 512 kB Flash fits customer wireless M-Bus or 802.15.4g profiles plus sensor data buffering, and the 4 kB EEPROM stores calibration constants. The exposed-pad 40-pin HVQFN provides thermal headroom for the PA at continuous TX duty cycles typical in industrial nodes.
추천
Wireless Battery-Connected Switches
The NXP JN5179/001Z is well-suited to ZigBee 3.0 battery-backed wall switches, door/window sensors, and battery-powered scene controllers. The integrated DC-DC buck and LDO blocks drop deep-sleep current to single-digit microamps, enabling 5-10 year battery life on a single CR2477 coin cell. The 4 kB EEPROM preserves the ZigBee NWK key when the battery is replaced, and the +10 dBm TX power ensures reliable command delivery through brick walls. Compared to proprietary 433 MHz solutions, the ZigBee 3.0 mesh extends range and provides bidirectional feedback via the IEEE 802.15.4 stack.
추천
ZigBee Range Extenders / Repeaters
The NXP JN5179/001Z is a strong fit for mains-powered ZigBee 3.0 range extenders because the +10 dBm output power and -96.5 dBm RX sensitivity extend mesh coverage in large homes and warehouses. The 512 kB Flash stores NXP's certified ZigBee router stack plus extender logic, while 32 kB RAM holds routing tables. The 40-pin HVQFN exposed pad dissipates heat from sustained TX/RX duty cycles. For new designs the NXP JN5189/88T offers lower sleep current and ongoing software support, but existing JN5179/001Z designs remain valid for repeaters already in field deployment.
추천
추천 제품 요약
엔지니어링 참조 데이터: JN5179/001Z — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | JN5179-001-M13Z | JN5179/001 | JN5178/001Z | JN5174/001Z | JN5189/001Z |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 40-pin HVQFN (QFN-40) Exposed Pad | Module with U.FL (same silicon) | 40-pin HVQFN (QFN-40) - same | 40-pin HVQFN (QFN-40) - same | 40-pin HVQFN (QFN-40) - same | 40-pin HVQFN (QFN-40) - same |
| Flash Memory | 512 kB | 512 kB | 512 kB | 256 kB | 160 kB | 640 kB |
| RAM | 32 kB | 32 kB | 32 kB | 32 kB | 24 kB | 152 kB |
| EEPROM | 4 kB | 4 kB | 4 kB | 4 kB | 4 kB | 4 kB |
| TX Output Power | +10 dBm | +10 dBm (on-board antenna variant) | +10 dBm | +10 dBm | +10 dBm | +10 dBm |
| RX Sensitivity | -96.5 dBm | -96.5 dBm | -96.5 dBm | -96.5 dBm | -96.5 dBm | -100 dBm |
| CPU Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M4 |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | Active (recommended for new designs) |
주요 차별점
- Largest on-die memory in the JN517x family (vs JN5178/001Z)
- Recommended NXP successor with Cortex-M4 + larger memory (vs JN5189/001Z)
- Pre-certified module variant for faster certification (vs JN5179-001-M13Z)
설계 노트
Place a pi-network antenna matching circuit (two capacitors + one inductor) between the differential RFIO_P/RFIO_N pins and the 50-ohm antenna trace. Keep the differential pair length-matched to within 1 mm and avoid routing near digital clocks. Use NXP's JN-AN-1001 reference design as the matched-network starting point for the 2.4 GHz ISM band.
Decouple AVDD, VDDPA, VCC_RF, VDD, and the exposed thermal pad individually per the JN517X datasheet. Use a 10 uF bulk + 100 nF + 10 pF stack on each analog rail. Place the 100 nF within 2 mm of the pin and tie the thermal pad to a continuous ground pour to dissipate PA heat at +10 dBm TX.
Do not skip the 32.768 kHz external sleep oscillator when targeting low deep-sleep current; internal RC alone will not achieve the microamp sleep currents advertised for ZigBee 3.0 battery nodes. Also ensure firmware leaves 256 kB+ Flash free for the NXP ZigBee 3.0 stack (~250 kB) before pulling in the application image.
규정 준수 정보
RoHS compliant per NXP product page. AEC-Q100 not applicable (consumer-grade wireless MCU). NRND - no new software releases planned per NXP product page notice.
