Microchip Technology

KSZ8842-16MBLI - 2-Port 10/100 Ethernet Switch | Microchip

부품 번호: KSZ8842-16MBLI ✓ 활성
100-LFBGA Package 10/100 Mb/s per port Speed
MOQ: 1 |

KSZ8842-16MBLI 개요

The Microchip Technology KSZ8842-16MBLI is a two-port 10/100 Ethernet switch with a generic 8-bit or 16-bit parallel CPU interface, supplied in a 100-LFBGA package. It integrates two Fast Ethernet switch ports with a non-PCI host interface for embedded networking designs.

An Ethernet switch is a network-semiconductor device that connects multiple Ethernet nodes through a common switching engine. In the broader hierarchy, the KSZ8842-16MBLI belongs to Ethernet interface controllers, then network interface ICs, interface ICs, and integrated circuits. Unlike a physical-layer-only Ethernet transceiver, this device includes the switching function required to interconnect two 10/100 Ethernet ports.

The KSZ8842-16MBLI is identified as a two-port 10/100 Base-T/TX PHY switch with a parallel interface. Its 8/16-bit bus architecture allows an embedded processor or controller to access registers and status information through a non-PCI interface. This makes it suitable for systems that need two Ethernet ports but do not require a PCI bus controller.

Microchip organizes the KSZ8842 family into PCI and non-PCI CPU-interface versions, with 8/16-bit and 32-bit bus designs available across the family. The “16” designation in KSZ8842-16MBLI identifies the 8/16-bit non-PCI family segment, while “MBL” identifies the 100-LFBGA package option used by this ordering code.

Typical applications include embedded routers, industrial control gateways, industrial automation equipment, networked sensors, set-top equipment, and compact communications controllers. In each case, the two integrated 10/100 ports reduce the need for separate Ethernet switching components while preserving a processor-friendly parallel management interface.

For PCB implementation, treat the 100-LFBGA land pattern and its power, ground, clock, interface, and Ethernet differential pairs as a high-speed mixed-signal layout. Follow the manufacturer's recommended decoupling network, provide a clean 25 MHz reference-clock source, and route each 10/100 Ethernet differential pair as a controlled-impedance pair with minimal stubs.

This page combines the family-level architecture, ordering distinctions, drop-in-replacement constraints, and practical PCB guidance into an engineering-focused selection resource. It also separates electrically compatible family members from package or interface changes that require board-level modification, helping designers avoid confusing a similar orderable code with a true pin-to-pin replacement.

드롭인 대체품: KSZ8842-16MBLI — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 제품에는 사용 가능한 드롭인 대체품이 없습니다.

대체품 요청

KSZ8842-16MBLI 최대 정격 & 전기적 특성

Ethernet Port Count 2 ports
Ethernet Speed 10/100 Mb/s per port
Ethernet Physical Layer 10/100 Base-T/TX PHY
Host Bus Width 8-bit or 16-bit parallel
Host Interface Type Non-PCI CPU interface
Device Function 2-port Ethernet switch with integrated 10/100 PHY
패키지 100-LFBGA
Package Pin Count 100 pins
Manufacturer Microchip Technology

KSZ8842-16MBLI 100 pins 핀 구성 가이드

KSZ8842-16MBLI(100 pins 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

KSZ8842-16MBLI의 100 pins 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: KSZ8842-16MBLI.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

KSZ8842-16MBLI 적합 용도: 6 애플리케이션s: Industrial Ethernet Gateway, Embedded Network Router, Networked Sensor Controller, Set-Top Network Interface, Industrial Automation Module, Secure Network Appliance.

🏭

Industrial Ethernet Gateway

The KSZ8842-16MBLI fits an industrial Ethernet gateway that needs two 10/100 Mb/s network connections and a processor-controlled management path. Its integrated 10/100 Base-T/TX PHY functions and 8-bit or 16-bit non-PCI interface allow an embedded controller to configure ports, monitor status, and forward data without a PCI bus. Two switch ports in one 100-LFBGA device can simplify a compact gateway PCB, although isolation, surge protection, and the application’s temperature requirements must be addressed separately.

🌐

Embedded Network Router

The KSZ8842-16MBLI is suitable for an embedded router or communications concentrator with two Fast Ethernet ports. The 10/100 Mb/s switch provides the physical connectivity, while the generic 8-bit or 16-bit parallel interface connects the switch to a host processor for routing-table and port management. Its 100-LFBGA package supports compact designs, but the board designer must follow the manufacturer’s differential-pair, reference-clock, decoupling, and thermal-land recommendations.

🧩

Networked Sensor Controller

A networked sensor controller can use the KSZ8842-16MBLI to connect sensing equipment to both a local network and an upstream controller. The two integrated 10/100 Base-T/TX PHY ports support network participation without requiring two independent physical-layer components, and the non-PCI CPU interface suits small embedded processors. For industrial sensor nodes, add the required line protection and verify that the device’s operating-temperature and supply limits match the installation environment.

📺

Set-Top Network Interface

The KSZ8842-16MBLI can provide dual 10/100 Mb/s connectivity in a set-top box or network terminal. One port may face an access network while the other connects to a local device, with the integrated switch handling Ethernet frame forwarding. The generic 8-bit or 16-bit host interface enables configuration from an embedded system-on-chip. PCB implementation should maintain controlled impedance on all Ethernet pairs and place the required clock and decoupling networks close to the 100-LFBGA device.

🏭

Industrial Automation Module

The KSZ8842-16MBLI is applicable to compact automation modules requiring two Ethernet ports for controller-to-network and controller-to-service-device connections. Its 10/100 Mb/s capability is appropriate for common industrial Ethernet segments operating at 10 or 100 Mb/s, while the non-PCI parallel interface works with embedded processors that do not use a PCI host bus. The design must still include suitable magnetics, isolation or protection strategy, grounding, and environmental qualification for the target enclosure.

🖥️

Secure Network Appliance

The KSZ8842-16MBLI can serve as the two-port Fast Ethernet front end of a compact secure gateway or appliance. The host processor accesses switch functions through the generic 8-bit or 16-bit non-PCI interface, while two integrated PHYs connect internal and external network segments. Because the device includes Ethernet physical-layer and switching functions, security functions such as firewalling and packet inspection remain the responsibility of the host processor. Layout should minimize coupling between digital bus signals and the Ethernet differential pairs.

추천 제품 요약

KSZ8842-16MQL Related two-port non-PCI Ethernet switch family option 사용처: Industrial Ethernet Gateway, Embedded Network Router, Networked Sensor Controller, Set-Top Network Interface, Industrial Automation Module, Secure Network Appliance KSZ8842-PMQL Microchip Technology 사용처: Industrial Ethernet Gateway, Embedded Network Router, Set-Top Network Interface, Secure Network Appliance KSZ8842-PMBL Microchip Technology 사용처: Industrial Ethernet Gateway, Networked Sensor Controller, Industrial Automation Module, Secure Network Appliance
What is the KSZ8842-16MBLI?
The KSZ8842-16MBLI is a Microchip Technology two-port 10/100 Ethernet switch with an integrated Base-T/TX PHY and a generic 8-bit or 16-bit non-PCI parallel CPU interface. According to the Microchip datasheet DS00003459A, it belongs to the KSZ8842 family of two-port Ethernet switches designed for embedded processor interfaces. The device is supplied in a 100-LFBGA package.
How many Ethernet ports does the KSZ8842-16MBLI have?
The KSZ8842-16MBLI provides two 10/100 Mb/s Ethernet ports. Each port is identified as a 10/100 Base-T/TX PHY, so the device integrates the physical-layer and switching functions required for a two-port embedded Ethernet node. According to the Microchip datasheet DS00003459A, the KSZ8842 family also includes PCI-interface and 32-bit-bus variants, but this ordering code is the 8/16-bit non-PCI version.
What is the host bus interface of the KSZ8842-16MBLI?
The KSZ8842-16MBLI uses a generic 8-bit or 16-bit parallel CPU interface rather than a PCI interface. This interface provides the embedded processor with access to switch and PHY control, status, and configuration functions. The Microchip datasheet DS00003459A confirms that the KSZ8842 family includes both PCI and non-PCI CPU-interface variants, with 8/16-bit and 32-bit bus designs.
What package does the KSZ8842-16MBLI use?
The KSZ8842-16MBLI is packaged in a 100-LFBGA, a lead-free ball grid array containing 100 connection positions. Package selection is important because the KSZ8842 family also includes ordering codes using other package options. The Microchip datasheet DS00003459A should be used for the exact land pattern, exposed-pad requirements, pin assignments, and PCB footprint.
Where can I download the KSZ8842-16MBLI datasheet PDF?
The manufacturer datasheet PDF is available from Microchip at the official DS00003459A download link on this page. It describes the KSZ8842 16/32 family of two-port Ethernet switches with non-PCI CPU interfaces and includes the ordering information needed to distinguish 8/16-bit and 32-bit versions. Use the pin-description table and package drawings in that document when assigning PCB connections.
Where can I find the KSZ8842-16MBLI pinout?
The KSZ8842-16MBLI pinout is found in the pin-description table of the Microchip datasheet DS00003459A. Because the device uses a 100-LFBGA, the datasheet package drawing and ball-numbering convention must be followed exactly during PCB layout. Do not infer ball assignments from a smaller package or from the similarly named 32-bit family members.
What is the best drop-in replacement for KSZ8842-16MBLI?
No verified pin-to-pin drop-in replacement for the exact KSZ8842-16MBLI ordering code was identified. The KSZ8842-16MBLI-TR has the same base electrical ordering code with a tape-and-reel shipping option, while KSZ8842-16MQL, KSZ8842-PMQL, and KSZ8842-PMBL differ in package or host-interface arrangements. Treat these as related family members, not automatic PCB replacements, and verify the manufacturer ordering table before substitution.
Can KSZ8842-16MQL replace KSZ8842-16MBLI?
The KSZ8842-16MQL should not be treated as a direct drop-in replacement for the KSZ8842-16MBLI without package-level verification. Both belong to the KSZ8842 two-port Ethernet-switch family, but the ordering suffixes identify different package and configuration options. The target uses a 100-LFBGA, whereas the family includes PQFP and LFBGA options. Confirm the ball or lead assignments against the Microchip datasheet before redesigning the PCB.
When should I choose the KSZ8842-16MBLI over a single-port Ethernet controller?
Choose the KSZ8842-16MBLI when an embedded system needs two integrated 10/100 Ethernet ports and an 8-bit or 16-bit non-PCI host interface. A single-port Ethernet controller is generally more appropriate when only one network connection is required. The KSZ8842-16MBLI combines two 10/100 Base-T/TX PHY ports with switching logic in one 100-LFBGA device.
Is the KSZ8842-16MBLI suitable for an industrial Ethernet gateway?
The KSZ8842-16MBLI is functionally suitable for a compact industrial Ethernet gateway that needs two 10/100 ports and processor-managed configuration. Its 8/16-bit non-PCI interface suits embedded control architectures, while the integrated PHY reduces the number of external network components. Final suitability depends on the application temperature range, power-supply requirements, isolation strategy, and electromagnetic-compatibility design specified in the manufacturer documentation.
What can replace the KSZ8842-16MBLI?
The closest documented replacements are KSZ8842 family members with different ordering suffixes, but no substitute was confirmed as a pin-to-pin drop-in replacement for the exact 100-LFBGA device. KSZ8842-16MBLI-TR changes the shipping format, while the 16MQL, PMQL, and PMBL variants can change package or bus architecture. Select a replacement only after checking every ball assignment, interface signal, clock requirement, and power connection.
KSZ8842-16MBLI vs KSZ8842-PMQL — which is better?
The KSZ8842-16MBLI is preferable when the host requires a non-PCI 8/16-bit CPU interface and the PCB can accept its 100-LFBGA package. The KSZ8842-PMQL belongs to the PCI-interface side of the family and is identified with a PQFP package option. They perform the same broad function as two-port 10/100 Ethernet switches, but their electrical host interfaces and package requirements are different.
What are the key specifications engineers should know about KSZ8842-16MBLI?
The key engineering facts are two 10/100 Mb/s Ethernet ports, integrated 10/100 Base-T/TX PHY functions, a generic 8-bit or 16-bit non-PCI parallel interface, and a 100-LFBGA package. The Microchip datasheet DS00003459A also places the part within the KSZ8842 family of PCI and non-PCI, 8/16-bit and 32-bit switch configurations. Supply voltage, clocking, temperature, and detailed PHY limits should be taken from the family datasheet.
Where can I buy the KSZ8842-16MBLI online?
Use the Request a Quote form on this page to request the KSZ8842-16MBLI by exact part number, package, quantity, and delivery requirements. The form is the appropriate route for current commercial availability, unit pricing, lot constraints, and lead time because distribution conditions can change rapidly. Specify KSZ8842-16MBLI rather than the tape-and-reel KSZ8842-16MBLI-TR code when the non-TR ordering code is required.
What is the price of the KSZ8842-16MBLI?
Current pricing for the KSZ8842-16MBLI should be requested through the Request a Quote form on this page using the exact MPN and required quantity. The form allows the requested quantity, package, and shipment details to be included in the quotation. Avoid substituting a family member or tape-and-reel variant when requesting a quote, because those order codes can have different commercial conditions.
What is the lead time and stock status of the KSZ8842-16MBLI?
Current stock status, minimum order quantity, and lead time for the KSZ8842-16MBLI should be confirmed through the Request a Quote form on this page. State the exact MPN, annual and prototype quantities, and required delivery date in the request. The active manufacturer product page and current distributor listings indicate that the device is part of the current KSZ8842 family, but a project-specific delivery commitment requires a quotation.

엔지니어링 참조 데이터: KSZ8842-16MBLI — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the KSZ8842-16MBLI for a compact embedded design that requires two 10/100 Ethernet ports, integrated Base-T/TX PHY functions, and a generic 8-bit or 16-bit non-PCI host interface on a 100-LFBGA PCB. Consider KSZ8842-16MQL only after confirming its exact package and pin assignments; it belongs to the same broad non-PCI family but is not a confirmed drop-in replacement. KSZ8842-PMQL is appropriate when a PCI host and PQFP package are preferred, while KSZ8842-PMBL provides an LFBGA-oriented family option with a PCI interface. KSZ8842-16MBLI-TR represents the same base device offered in tape-and-reel format rather than a different electrical design. For an existing KSZ8842-16MBLI PCB, favor the exact ordering code unless Microchip’s ordering table explicitly confirms every electrical and package parameter. For a new design, compare host-bus requirements, package area, assembly capability, Ethernet components, clocking, power, and environmental requirements before fixing the switch choice.

대체품과의 비교

파라미터 이 제품 KSZ8842-16MQL KSZ8842-PMQL KSZ8842-PMBL
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Ethernet Ports 2 ports 2 ports 2 ports 2 ports
Ethernet Speed 10/100 Mb/s 10/100 Mb/s 10/100 Mb/s 10/100 Mb/s
Host Interface Generic 8/16-bit non-PCI CPU interface Generic 8/16-bit non-PCI CPU interface PCI CPU interface PCI CPU interface
Physical Layer 10/100 Base-T/TX PHY 10/100 Base-T/TX PHY 10/100 Base-T/TX PHY 10/100 Base-T/TX PHY
Switching Function Two-port 10/100 Ethernet switch Two-port 10/100 Ethernet switch Two-port 10/100 Ethernet switch Two-port 10/100 Ethernet switch
Drop-In Status Reference device Not confirmed; verify package and pinout Not a drop-in option; PCI interface and PQFP package Not a drop-in option; PCI interface

주요 차별점

  • Combines two integrated 10/100 Ethernet ports in one 100-LFBGA device (vs KSZ8842-PMQL)
  • Supports processor architectures without a PCI host bus (vs KSZ8842-PMBL)
  • Combines two 10/100 Base-T/TX PHY functions with switching logic (vs KSZ8842-16MQL)

설계 노트

Route each 10/100 Ethernet differential pair as a controlled-impedance pair with symmetric geometry and no unnecessary stubs. Keep the pairs away from clocks, high-speed CPU-bus traces, and switching-power nodes. Place the Ethernet input and output network components at the locations specified by the manufacturer reference design. The 100-LFBGA also requires exact ball assignment and land-pattern verification; never derive the footprint from a visually similar family member.

Use the supply voltage, current limits, and decoupling values listed in the Microchip datasheet DS00003459A. Place the required bulk and high-frequency decoupling capacitors as close as practical to their designated power balls, with a low-impedance ground path and adequate via connectivity beneath the device. Keep analog supply and digital supply return currents separated as far as the reference layout allows to reduce switching noise and ground bounce.

Provide the required reference clock with low jitter and route it away from Ethernet differential pairs and parallel host-bus signals. Account for clock, bus, and reset timing when the host processor initializes the switch. If the processor and Ethernet switch share a board, place series damping or other source-termination measures only after analyzing the actual edge rates and topology; the 8/16-bit bus timing and clock requirements should be checked in the manufacturer documentation.

Do not confuse KSZ8842-16MBLI with KSZ8842-16MBLI-TR, KSZ8842-16MQL, KSZ8842-PMQL, or KSZ8842-PMBL. The suffix changes the shipping option, package, or CPU-interface architecture, and a similar family code is not automatically pin compatible. Before substitution, compare package drawings, every power ball, the reference clock, reset behavior, CPU-bus width, PHY connections, and Ethernet transformer or magnetic-component requirements.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The LFBGA package designation does not by itself establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals compliance. Confirm these declarations using the current Microchip product declaration or material-compliance documentation.

데이터 검증일: 2026-11-18 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

ksz8842 16mvli ksz8842 pmql micrel ksz8842 KSZ8842-16MBLI datasheet KSZ8842-16MBLI datasheet pdf KSZ8842-16MBLI pinout KSZ8842-16MBLI equivalent KSZ8842-16MBLI replacement KSZ8842-16MBLI cross reference KSZ8842-16MBLI vs KSZ8842-16MQL KSZ8842-16MBLI footprint KSZ8842-16MBLI price KSZ8842-16MBLI stock 100-LFBGA 2-port Ethernet switch KSZ8842-16MBLI application circuit

관련 부품 & 용어

Microchip Technology Micrel Semiconductor KSZ8842-16MBLI KSZ8842-16MBLI-TR KSZ8842-16MQL KSZ8842-PMQL KSZ8842-PMBL Ethernet switch Ethernet interface controller network interface IC integrated circuit semiconductor 10/100 Ethernet Base-T/TX PHY non-PCI CPU interface 8-bit parallel bus 16-bit parallel bus 100-LFBGA BGA package family lead-free package surface-mount device embedded networking industrial Ethernet gateway networked sensor controller differential-pair routing
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기