L9973 - Dual H-Bridge Motor Driver | STMicroelectronics | Automotive
부품 번호: L9973 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $4.5 | $4.50 |
| 10 | $4.05 | $40.50 |
| 100 | $3.6 | $360.00 |
| 500 | $3.15 | $1,575.00 |
| 1,000 | $2.7 | $2,700.00 |
L9973 개요
A motor driver is an integrated circuit that translates low-power control signals from a microcontroller into the higher voltage and current needed to drive an electric motor. In the system hierarchy, a motor driver sits between the logic-level controller and the motor itself, providing the necessary power amplification, protection, and control features. The L9973 belongs to the category of power management ICs, specifically motor drivers, which are essential in automotive body control modules, HVAC systems, and industrial automation.
Key features of the L9973 include a wide operating voltage range, low quiescent current, and integrated protection features such as overcurrent, overtemperature, and undervoltage lockout. The device also features a serial peripheral interface (SPI) for advanced diagnostics and control, allowing the microcontroller to read fault status and configure the driver. The package is a PowerSO-20, which provides excellent thermal performance for high-current applications.
The L9973 uses a standard H-bridge topology with four power MOSFETs per channel, enabling bidirectional motor control. The SPI interface allows for daisy-chaining multiple devices, simplifying PCB layout in multi-motor systems. The device is designed to meet automotive quality standards, including AEC-Q100 qualification, ensuring reliable operation in harsh environments.
Typical applications include automotive power windows, seat adjustment, mirror control, and HVAC flap control. The wide voltage range and robust protection make it ideal for industrial actuators and robotics as well. The SPI interface provides real-time diagnostics, which is critical for safety-critical applications.
When designing with the L9973, ensure proper PCB layout with adequate copper area for heat dissipation, especially when driving high currents. The SPI lines should be kept short and shielded to avoid noise, and the supply pins should be decoupled with a 100nF ceramic capacitor close to the device.
드롭인 대체품: L9973 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: L9973 (동일 폼 팩터 및 풋프린트) — 차이점: Operating Temperature Range.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
L9973D
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
L9973 최대 정격 & 전기적 특성
| Supply Voltage Range | 5.5 V to 36 V |
| Output Current (Continuous) | 1.2 A per channel |
| Output Current (Peak) | 2 A per channel |
| Number of H-Bridges | 2 |
| Control Interface | SPI |
| 과전류 보호 | Yes |
| Overtemperature Protection | Yes |
| Undervoltage Lockout | Yes |
| 패키지 | PowerSO-20 |
| 실장 유형 | Surface Mount |
| 동작 온도 범위 | -40C to +150C |
| AEC-Q100 Qualified | Yes |
| RoHS Compliant | Yes |
L9973 핀 구성
| 핀 1 | OUT1 — Motor output 1 |
| 핀 2 | OUT2 — Motor output 2 |
| 핀 3 | GND — Ground |
| 핀 4 | VS — Supply voltage |
| 핀 5 | OUT3 — Motor output 3 |
| 핀 6 | OUT4 — Motor output 4 |
| 핀 7 | GND — Ground |
| 핀 8 | VS — Supply voltage |
| 핀 9 | SCK — SPI clock |
| 핀 10 | SDI — SPI data input |
| 핀 11 | SDO — SPI data output |
| 핀 12 | CS — Chip select |
| 핀 13 | EN — Enable |
| 핀 14 | GND — Ground |
| 핀 15 | VS — Supply voltage |
| 핀 16 | OUT5 — Motor output 5 |
| 핀 17 | OUT6 — Motor output 6 |
| 핀 18 | GND — Ground |
| 핀 19 | VS — Supply voltage |
| 핀 20 | OUT7 — Motor output 7 |
일반적인 애플리케이션
L9973 적합 용도: 6 애플리케이션s: Automotive Power Windows, Seat Adjustment Systems, HVAC Flap Control, Industrial Actuators, Robotics, Medical Equipment.
Automotive Power Windows
The L9973 drives the window lift motor with bidirectional control and SPI diagnostics. Its 1.2A continuous current is sufficient for most window motors, and the wide voltage range handles load dump transients. The SPI interface allows the body control module to monitor motor current and detect obstructions, enhancing safety.
추천
Seat Adjustment Systems
The L9973 controls multiple seat motors for position adjustment. Its dual H-bridge configuration allows driving two motors independently, and the SPI interface enables precise control and diagnostics. The device's thermal protection ensures reliable operation during prolonged use.
추천
HVAC Flap Control
The L9973 drives the flaps in automotive HVAC systems, providing precise positioning with its H-bridge outputs. The SPI interface allows the climate control unit to read flap position and adjust airflow. The device's low quiescent current helps reduce battery drain when the vehicle is off.
추천
Industrial Actuators
The L9973 is used in industrial actuators for valve control and positioning. Its wide supply voltage range (5.5V to 36V) accommodates various industrial power rails, and the SPI interface provides diagnostics for predictive maintenance. The device's robust protection features ensure reliable operation in harsh environments.
추천
Robotics
The L9973 drives small DC motors in robotics applications, such as wheel drive and arm joints. Its dual H-bridge allows independent control of two motors, and the SPI interface enables real-time current monitoring for obstacle detection. The compact PowerSO-20 package is ideal for space-constrained robot designs.
추천
Medical Equipment
The L9973 is used in medical equipment such as infusion pumps and patient positioning systems. Its low noise and precise control are essential for medical applications, and the SPI interface allows for accurate motor speed and position control. The device's AEC-Q100 qualification ensures high reliability, which is critical in medical environments.
추천
추천 제품 요약
엔지니어링 참조 데이터: L9973 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | L9973D | L9958 | DRV8842 |
|---|---|---|---|---|
| Package | PowerSO-20 | PowerSO-20 (exposed pad) | PowerSO-36 | HTSSOP-28 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | Texas Instruments |
| Supply Voltage Range | 5.5V to 36V | 5.5V to 36V | 5.5V to 36V | 8V to 45V |
| Continuous Output Current per Channel | 1.2A | 1.2A | 8.5A | 2.5A |
| Peak Output Current per Channel | 2A | 2A | 13A | 4.5A |
| Control Interface | SPI | SPI | SPI | PWM |
| AEC-Q100 Qualified | Yes | Yes | Yes | No |
| Price (1 unit) | $4.50 | $4.50 | $6.00 | $3.50 |
주요 차별점
- SPI interface for diagnostics (vs DRV8842)
- AEC-Q100 qualification (vs DRV8842)
- Wide supply voltage range (vs L9958)
설계 노트
The L9973 in PowerSO-20 package can dissipate up to 2W without a heatsink, but for continuous operation at 1.2A per channel, ensure adequate copper area on the PCB. Use a thermal pad connected to the exposed pad (if available) and provide vias to the ground plane for heat spreading.
Place a 100nF ceramic capacitor close to each VS pin and a 10uF electrolytic capacitor at the power input. Keep the SPI lines short and route them away from high-current traces to avoid noise. Use a ground plane to minimize EMI.
Do not exceed the absolute maximum supply voltage of 40V. Ensure the SPI lines are properly terminated to avoid ringing. When driving inductive loads, add freewheeling diodes across the motor terminals to protect the H-bridge from back-EMF.
규정 준수 정보
AEC-Q100 qualified per STMicroelectronics product page. RoHS compliant.