LC4032ZC-5M56C - 400MHz SuperFAST CPLD | Lattice Semiconductor
부품 번호: LC4032ZC-5M56C ✓ 활성LC4032ZC-5M56C 개요
A complex programmable logic device, or CPLD, is a programmable semiconductor within the broader FPGA and programmable-logic hierarchy. Unlike a software-controlled processor, a CPLD executes fixed Boolean logic directly from its configuration memory. The ispMACH 4000Z architecture combines nonvolatile configuration with deterministic timing, making it useful for control logic, interface adaptation, protocol conversion, and signal processing functions that must operate predictably after power-up.
The LC4032ZC-5M56C provides 400 MHz maximum operating frequency, 2.5 ns minimum propagation delay, and up to four programmable global clock pins with programmable clock polarity control. Its 32 user I/Os support connections to external digital systems, while the three supported supply levels allow the device to be integrated into designs operating at 1.8 V, 2.5 V, or 3.3 V. In-system programming supports configuration updates without removing the device from its circuit.
The device belongs to Lattice Semiconductor's ispMACH 4000Z family of CMOS complex programmable logic devices. Its high-density architecture is intended for designs that need more logic capacity and I/O flexibility than basic GAL-type devices while retaining the straightforward programming model and deterministic behavior associated with CPLDs. The maximum frequency and propagation-delay figures represent performance capabilities that depend on the selected logic design and timing constraints.
Typical applications include industrial control and automation, communication-interface logic, test and measurement equipment, embedded system peripheral expansion, and compact general-purpose logic consolidation. The 56-ball surface-mount package can also help reduce board area when its I/O and power requirements match the PCB land pattern. Signal integrity and power planning remain important at high clock rates.
Designers should preserve the manufacturer's recommended decoupling configuration and use the pin description table when assigning the ball grid. PCB trace routing must account for the short distance between clock inputs, global clock networks, and general I/O banks. Because configuration storage is nonvolatile, the programmed logic remains available after power restoration, subject to normal power-up timing requirements.
This page combines device specifications, package details, configuration guidance, comparison criteria, and application-oriented design notes. It also identifies package-compatible Lattice variants while clearly separating confirmed attributes from details that require verification in the manufacturer datasheet before a new PCB or replacement decision.
드롭인 대체품: LC4032ZC-5M56C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: LC4032ZC-5M56C (동일 폼 팩터 및 풋프린트) — 차이점: Global Clock Pins, Product Type.
LC4032ZC-5MN56C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LC4032ZC-5M56I
✅ 드롭인가격 문의
데이터시트 보기 →LC4032ZC-35MN56C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LC4032ZC-5M56C 최대 정격 & 전기적 특성
| Product Type | Complex programmable logic device (CPLD) |
| Device Family | ispMACH 4000Z |
| Maximum Operating Frequency | 400 MHz |
| Minimum Propagation Delay | 2.5 ns |
| Internal Frequency | 192 MHz |
| Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| Logic Family | CMOS |
| User I/O Count | 32 |
| Total Pin Count | 49 pins |
| 패키지 | 56-ball CABGA |
| Programming Method | In-system programmable |
| Global Clock Pins | Up to 4 |
| Clock Polarity | Programmable |
| 실장 유형 | Surface mount |
| Datasheet Length | 99 pages |
LC4032ZC-5M56C 56-ball cabga 핀 구성 가이드
LC4032ZC-5M56C(56-ball cabga 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: LC4032ZC-5M56C.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
LC4032ZC-5M56C 적합 용도: 6 애플리케이션s: Industrial Control Logic, Communication Interface Consolidation, Test and Measurement Equipment, Embedded Peripheral Expansion, LED and Display Control, Security and Access Control.
Industrial Control Logic
The LC4032ZC-5M56C fits compact industrial control systems that combine machine-control functions, sensor conditioning, actuator sequencing, and communication-interface logic in one programmable device. Its 400 MHz maximum operating frequency and 2.5 ns minimum propagation delay support deterministic control paths, while 32 user I/Os provide connections to sensors, relays, indicators, and field buses. The three supported supply voltages also enable use in mixed industrial voltage domains. Designers should partition fast timing paths carefully, provide the manufacturer-recommended decoupling, and verify that the selected logic density leaves adequate routing resources for the complete control design.
추천
Communication Interface Consolidation
The LC4032ZC-5M56C can consolidate protocol conversion, command decoding, frame checking, and data-routing functions into a single CPLD. Its 32 user I/Os and dedicated global clock resources are useful when several external interfaces must share a common clock domain, while the 2.5 ns minimum propagation delay supports demanding combinational paths. In-system programming allows board-level configuration or updates without device removal. Exact interface viability depends on supported I/O standards and timing, so engineers should use the datasheet pin descriptions, validate edge rates, and maintain controlled-impedance routing for high-speed signals.
추천
Test and Measurement Equipment
The LC4032ZC-5M56C is appropriate for deterministic sequencing, trigger generation, status decoding, and front-panel control logic in test and measurement instruments. Its 400 MHz maximum operating frequency permits fast state transitions, and up to four global clock pins with programmable polarity help distribute related timing events. The 56-ball CABGA package supports compact board layouts where analog, digital, and power sections share limited space. Instrumentation designs should isolate sensitive analog paths from digital switching activity, use short return-current connections, and verify all timing relationships with the instrument’s required measurement accuracy.
추천
Embedded Peripheral Expansion
The LC4032ZC-5M56C can add dedicated peripheral functions to an embedded platform without expanding the main processor. Typical blocks include keyboard scanning, display decoding, interrupt aggregation, bus arbitration, and status-bit translation. With 32 user I/Os and deterministic CPLD propagation characteristics, it can place fixed logic close to external devices and reduce processor interrupt overhead. The designer should partition I/O ownership clearly, avoid unnecessary contention on shared buses, and confirm that the 1.8 V, 2.5 V, or 3.3 V operating option matches the connected devices and level-shifting arrangement.
추천
LED and Display Control
The LC4032ZC-5M56C can implement display multiplexing, LED refresh sequencing, brightness-control decoding, keypad scanning, and fault indication around a host processor. Its fast combinational logic supports deterministic refresh timing, and the large user-I/O count allows multiple display and indicator lines to be driven from one programmable block. The device is most useful where several small displays or indicators require coordinated updates rather than continuous high-bandwidth graphics. Engineers should budget logic and routing resources, account for output drive and level requirements, and keep display return currents away from sensitive analog circuitry.
추천
Security and Access Control
The LC4032ZC-5M56C can implement credential-format conversion, lock-state logic, alarm sequencing, event logging control, and supervised-input decoding in compact access-control systems. Deterministic CPLD timing is valuable because door monitoring, tamper detection, and actuator commands often require predictable relationships between multiple signals. Its 32 user I/Os allow numerous sensors and indicators to be consolidated, while in-system programming supports configuration maintenance. For security-critical designs, engineers should also review the system threat model, secure programming procedures, fail-safe actuator behavior, and regulatory requirements rather than treating device speed alone as the primary security measure.
추천
추천 제품 요약
엔지니어링 참조 데이터: LC4032ZC-5M56C — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | LC4032ZC-5MN56C | LC4032ZC-5M56I | LC4032ZC-35MN56C |
|---|---|---|---|---|
| Package | 56-ball CABGA | 56-ball CABGA | 56-ball CABGA | 56-ball CABGA |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Global Clock Pins | Up to 4 | Up to 4 | Up to 4 | Up to 4 |
| Programming Method | In-system programmable | In-system programmable | In-system programmable | In-system programmable |
| Logic Family | CMOS | CMOS | CMOS | CMOS |
주요 차별점
- High deterministic timing for compact logic consolidation (vs LC4032ZC-5M56I)
- Direct LC4032ZC-family footprint continuity (vs LC4032ZC-35MN56C)
- Multi-voltage integration support (vs LC4032ZC-5M56I)
- Dedicated clock and I/O resources for interface logic (vs LC4032ZC-5MN56C)
설계 노트
Use the manufacturer’s 56-ball CABGA land pattern and pin-description table when creating or reviewing the PCB footprint. Pay particular attention to ball assignment, exposed power connections, and the distinction between device signal pins and the complete package ball grid. Place required bypass capacitors close to their associated supply balls with short ground returns, and avoid routing high-speed clock signals over split-plane boundaries.
Treat clock and other high-speed routes as controlled-impedance signals rather than ordinary logic interconnects. Keep global clock inputs short, provide a continuous reference plane, minimize stubs and unnecessary vias, and maintain adequate spacing from switching outputs. Timing closure must include external clock jitter, board skew, input threshold behavior, and the selected I/O standard rather than relying only on the 400 MHz device rating.
Do not assume that two LC4032ZC ordering suffixes are interchangeable solely because they use the same package family. Check the ordering guide for speed class, temperature grade, qualification grade, and configuration compatibility. A safe replacement also requires matching the programmed logic file, I/O behavior, supply voltage, pin functions, and PCB land pattern; otherwise the alternative should remain a prototype substitution pending engineering approval.
Plan the 1.8 V, 2.5 V, or 3.3 V supply rail according to the operating mode used by the design. Confirm required I/O levels, static and dynamic current behavior, and the manufacturer’s decoupling recommendations. Keep supply and ground planes continuous, connect all required package supply balls, and test startup and power-state transitions with realistic loads before production release.
규정 준수 정보
No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement appears in the cited device pages. AEC-Q100 is not applicable to this general-purpose CPLD.