Lattice Semiconductor

LC4032ZC-5M56C - 400MHz SuperFAST CPLD | Lattice Semiconductor

MPN: LC4032ZC-5M56C ✓ Aktif
1.8 V, 2.5 V, or 3.3 V Vdss 56-ball CABGA Package 400 MHz Speed
MOQ: 1 |

LC4032ZC-5M56C Ringkasan

The Lattice Semiconductor LC4032ZC-5M56C is an in-system-programmable SuperFAST high-density complex programmable logic device with a maximum operating frequency of 400 MHz, 2.5 ns propagation delay, and a 56-ball CABGA package. It operates from 3.3 V, 2.5 V, or 1.8 V and is designed for logic implementations requiring fast deterministic routing and high I/O density.

A complex programmable logic device, or CPLD, is a programmable semiconductor within the broader FPGA and programmable-logic hierarchy. Unlike a software-controlled processor, a CPLD executes fixed Boolean logic directly from its configuration memory. The ispMACH 4000Z architecture combines nonvolatile configuration with deterministic timing, making it useful for control logic, interface adaptation, protocol conversion, and signal processing functions that must operate predictably after power-up.

The LC4032ZC-5M56C provides 400 MHz maximum operating frequency, 2.5 ns minimum propagation delay, and up to four programmable global clock pins with programmable clock polarity control. Its 32 user I/Os support connections to external digital systems, while the three supported supply levels allow the device to be integrated into designs operating at 1.8 V, 2.5 V, or 3.3 V. In-system programming supports configuration updates without removing the device from its circuit.

The device belongs to Lattice Semiconductor's ispMACH 4000Z family of CMOS complex programmable logic devices. Its high-density architecture is intended for designs that need more logic capacity and I/O flexibility than basic GAL-type devices while retaining the straightforward programming model and deterministic behavior associated with CPLDs. The maximum frequency and propagation-delay figures represent performance capabilities that depend on the selected logic design and timing constraints.

Typical applications include industrial control and automation, communication-interface logic, test and measurement equipment, embedded system peripheral expansion, and compact general-purpose logic consolidation. The 56-ball surface-mount package can also help reduce board area when its I/O and power requirements match the PCB land pattern. Signal integrity and power planning remain important at high clock rates.

Designers should preserve the manufacturer's recommended decoupling configuration and use the pin description table when assigning the ball grid. PCB trace routing must account for the short distance between clock inputs, global clock networks, and general I/O banks. Because configuration storage is nonvolatile, the programmed logic remains available after power restoration, subject to normal power-up timing requirements.

This page combines device specifications, package details, configuration guidance, comparison criteria, and application-oriented design notes. It also identifies package-compatible Lattice variants while clearly separating confirmed attributes from details that require verification in the manufacturer datasheet before a new PCB or replacement decision.

Pilihan pengganti yang segera untuk LC4032ZC-5M56C — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera LC4032ZC-5M56C (sama faktor bentuk dan kaki) — berbeza dalam Global Clock Pins, Product Type.

Lattice Semiconductor
Global Clock Pins: Up to 4 pins
Product Type: Complex programmable logic device
Bandingkan Dengan LC4032ZC-5M56C →

LC4032ZC-5MN56C

✅ Masuk Drop-In
📦 56-ball CABGA
Ordering suffix differs by one grade character; frequency class is reported as 400 MHz for both, while temperature or qualification grade requires confirmation.

📋 Alternatif rujukan (tidak dalam katalog)

LC4032ZC-5M56I

✅ Masuk Drop-In
Lattice Semiconductor
📦 56-ball CABGA
Complex programmable logic device · SuperFast high-density PLD · CMOS · 32 macro cells · 400 MHz · 192 MHz · 2.5 ns · 4.4 ns

Hubungi untuk harga

Lihat Datasheet →

LC4032ZC-35MN56C

✅ Masuk Drop-In
📦 56-ball CABGA
Speed code changes from -5 to -35 and the N grade character is present; the alternative is listed as a separate ordering configuration in the LC4032ZC family.

📋 Alternatif rujukan (tidak dalam katalog)

LC4032ZC-5M56C Penilaian maksimum & Ciri-ciri Elektrik

Product Type Complex programmable logic device (CPLD)
Device Family ispMACH 4000Z
Maximum Operating Frequency 400 MHz
Minimum Propagation Delay 2.5 ns
Internal Frequency 192 MHz
Supply Voltage Options 1.8 V, 2.5 V, or 3.3 V
Logic Family CMOS
User I/O Count 32
Total Pin Count 49 pins
Kemasan 56-ball CABGA
Programming Method In-system programmable
Global Clock Pins Up to 4
Clock Polarity Programmable
Jenis Pemasangan Surface mount
Datasheet Length 99 pages

Panduan Konfigurasi Pin LC4032ZC-5M56C 56-ball cabga

Konfigurasi pin untuk LC4032ZC-5M56C (56-ball cabga pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 56-ball cabga untuk LC4032ZC-5M56C

Tiada data garisan pin yang diperoleh untuk LC4032ZC-5M56C.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

LC4032ZC-5M56C patut untuk 6 aplikasis: Industrial Control Logic, Communication Interface Consolidation, Test and Measurement Equipment, Embedded Peripheral Expansion, LED and Display Control, Security and Access Control.

🏭

Industrial Control Logic

The LC4032ZC-5M56C fits compact industrial control systems that combine machine-control functions, sensor conditioning, actuator sequencing, and communication-interface logic in one programmable device. Its 400 MHz maximum operating frequency and 2.5 ns minimum propagation delay support deterministic control paths, while 32 user I/Os provide connections to sensors, relays, indicators, and field buses. The three supported supply voltages also enable use in mixed industrial voltage domains. Designers should partition fast timing paths carefully, provide the manufacturer-recommended decoupling, and verify that the selected logic density leaves adequate routing resources for the complete control design.

🌐

Communication Interface Consolidation

The LC4032ZC-5M56C can consolidate protocol conversion, command decoding, frame checking, and data-routing functions into a single CPLD. Its 32 user I/Os and dedicated global clock resources are useful when several external interfaces must share a common clock domain, while the 2.5 ns minimum propagation delay supports demanding combinational paths. In-system programming allows board-level configuration or updates without device removal. Exact interface viability depends on supported I/O standards and timing, so engineers should use the datasheet pin descriptions, validate edge rates, and maintain controlled-impedance routing for high-speed signals.

🔧

Test and Measurement Equipment

The LC4032ZC-5M56C is appropriate for deterministic sequencing, trigger generation, status decoding, and front-panel control logic in test and measurement instruments. Its 400 MHz maximum operating frequency permits fast state transitions, and up to four global clock pins with programmable polarity help distribute related timing events. The 56-ball CABGA package supports compact board layouts where analog, digital, and power sections share limited space. Instrumentation designs should isolate sensitive analog paths from digital switching activity, use short return-current connections, and verify all timing relationships with the instrument’s required measurement accuracy.

🖥️

Embedded Peripheral Expansion

The LC4032ZC-5M56C can add dedicated peripheral functions to an embedded platform without expanding the main processor. Typical blocks include keyboard scanning, display decoding, interrupt aggregation, bus arbitration, and status-bit translation. With 32 user I/Os and deterministic CPLD propagation characteristics, it can place fixed logic close to external devices and reduce processor interrupt overhead. The designer should partition I/O ownership clearly, avoid unnecessary contention on shared buses, and confirm that the 1.8 V, 2.5 V, or 3.3 V operating option matches the connected devices and level-shifting arrangement.

📺

LED and Display Control

The LC4032ZC-5M56C can implement display multiplexing, LED refresh sequencing, brightness-control decoding, keypad scanning, and fault indication around a host processor. Its fast combinational logic supports deterministic refresh timing, and the large user-I/O count allows multiple display and indicator lines to be driven from one programmable block. The device is most useful where several small displays or indicators require coordinated updates rather than continuous high-bandwidth graphics. Engineers should budget logic and routing resources, account for output drive and level requirements, and keep display return currents away from sensitive analog circuitry.

🎥

Security and Access Control

The LC4032ZC-5M56C can implement credential-format conversion, lock-state logic, alarm sequencing, event logging control, and supervised-input decoding in compact access-control systems. Deterministic CPLD timing is valuable because door monitoring, tamper detection, and actuator commands often require predictable relationships between multiple signals. Its 32 user I/Os allow numerous sensors and indicators to be consolidated, while in-system programming supports configuration maintenance. For security-critical designs, engineers should also review the system threat model, secure programming procedures, fail-safe actuator behavior, and regulatory requirements rather than treating device speed alone as the primary security measure.

Ringkasan Produk Disebarkan

LC4032ZC-5M56C Lattice Semiconductor Dipergunakan di: Industrial Control Logic, Communication Interface Consolidation, Test and Measurement Equipment, Embedded Peripheral Expansion, LED and Display Control, Security and Access Control LC4032ZC-5MN56C Package-family control logic option Dipergunakan di: Industrial Control Logic, Embedded Peripheral Expansion LC4032ZC-5M56I Lattice Semiconductor Dipergunakan di: Communication Interface Consolidation, LED and Display Control LC4032ZC-35MN56C Alternate device speed configuration Dipergunakan di: Test and Measurement Equipment, Security and Access Control
What is the operating frequency of the LC4032ZC-5M56C?
The LC4032ZC-5M56C supports a maximum operating frequency of 400 MHz and a minimum propagation delay of 2.5 ns according to the Lattice Semiconductor manufacturer datasheet. These figures describe the device family’s performance envelope; the frequency achieved by an individual design also depends on logic depth, routing, clocking, I/O standards, and timing constraints.
What type of programmable logic device is the LC4032ZC-5M56C?
The LC4032ZC-5M56C is a 3.3 V, 2.5 V, and 1.8 V in-system-programmable SuperFAST high-density CPLD in the Lattice Semiconductor ispMACH 4000Z family. It combines nonvolatile configuration, deterministic CPLD timing, 32 user I/Os, and up to four global clock pins for compact control, interface, and signal-processing logic.
Where can I download the LC4032ZC-5M56C datasheet PDF?
The LC4032ZC-5M56C datasheet is accessible through the Lattice Semiconductor ispMACH 4000Z documentation listed on this page’s datasheet link. The document identifies the device as a 3.3 V, 2.5 V, and 1.8 V in-system-programmable SuperFAST high-density PLD and provides the electrical, timing, package, and pin information needed for design review.
Where can I find the LC4032ZC-5M56C pinout?
The authoritative LC4032ZC-5M56C pin assignment is found in the manufacturer datasheet’s pin-description and package tables. The device is associated with a 56-ball CABGA package, while one catalog summary reports 49 pins because it counts the externally designated device pins separately from the complete ball grid. Use the datasheet ball map when creating the PCB footprint.
What is the difference between LC4032ZC-5M56C and LC4032ZC-5MN56C?
Both are Lattice Semiconductor LC4032ZC-series in-system-programmable CPLDs associated with the same 56-ball CABGA family, but their ordering suffixes indicate different device grades or configurations. The manufacturer datasheet and ordering guide must be checked for the exact commercial-versus-industrial and temperature-grade distinction before treating LC4032ZC-5MN56C as a drop-in replacement.
When should I choose the LC4032ZC-5M56C over another CPLD?
Choose the LC4032ZC-5M56C when a design requires deterministic CPLD behavior, in-system programming, operation at 1.8 V, 2.5 V, or 3.3 V, and up to 32 user I/Os in a compact 56-ball CABGA. An FPGA may be preferable for substantially larger designs, higher logic capacity, block RAM, or DSP resources, while a simpler PLD may suffice for low-complexity functions.
Is the LC4032ZC-5M56C suitable for high-speed interface logic?
The LC4032ZC-5M56C is suitable for high-speed deterministic interface logic when its 400 MHz maximum frequency, 2.5 ns propagation delay, and global clock resources satisfy the design timing. The complete design must also meet the selected I/O standard, timing constraints, PCB routing rules, and external-interface requirements described in the manufacturer documentation.
What can replace the LC4032ZC-5M56C?
LC4032ZC-5MN56C is the closest package-family alternative identified for the LC4032ZC-5M56C, while LC4032ZC-5M56I offers an industrial-grade ordering option and LC4032ZC-35MN56C represents another listed speed and grade combination. Before replacement, verify the exact package drawing, pin functions, voltage grade, temperature range, timing class, and configuration compatibility.
Is the LC4032ZC-5M56C the same as LC4032ZC-5M56I?
The LC4032ZC-5M56C and LC4032ZC-5M56I share the LC4032ZC device name and 56-ball CABGA family, but the ordering suffix identifies different qualification or temperature grades. They may be electrically close enough for a PCB-level substitution, but an approved replacement requires comparison of the ordering table, operating-temperature grade, and lifecycle requirements.
What are the key specifications of the LC4032ZC-5M56C that engineers should know?
The key specifications are a 400 MHz maximum operating frequency, 2.5 ns minimum propagation delay, operation at 1.8 V, 2.5 V, or 3.3 V, 32 user I/Os, in-system programmability, and up to four global clock pins with programmable polarity. The package is a 56-ball CABGA, and the device uses CMOS logic.
Where can I buy the LC4032ZC-5M56C and check its lead time?
Use the Request a Quote form on this page to request the LC4032ZC-5M56C, current lead time, minimum order quantity, and authorized sourcing options. The manufacturer datasheet identifies the technical configuration, while the quote process is the appropriate route for obtaining a current commercial commitment and shipment schedule.
What is the price of the LC4032ZC-5M56C?
A current unit price and volume schedule for the LC4032ZC-5M56C should be obtained through the Request a Quote form on this page. Pricing can vary with order quantity, date, packaging condition, and supply status, so a static figure would not reliably represent the current commercial offer.
Is the LC4032ZC-5M56C in stock?
Current stock status for the LC4032ZC-5M56C should be confirmed through the Request a Quote form on this page. Submit the required quantity, target date, and delivery location so the current availability and allocation can be matched to the procurement requirement rather than relying on an unconfirmed listing status.
How many I/Os and global clocks does the LC4032ZC-5M56C provide?
The LC4032ZC-5M56C provides 32 user I/Os and supports up to four global clock pins according to the Lattice Semiconductor manufacturer datasheet. The global clock network includes programmable clock polarity control, allowing multiple clock domains to be routed through dedicated resources when the design requires deterministic clock distribution.
What is the best Lattice equivalent for the LC4032ZC-5M56C?
LC4032ZC-5MN56C is the closest listed Lattice equivalent because it belongs to the same LC4032ZC family and is associated with the same 56-ball CABGA package family. Exact interchangeability still depends on the speed grade, temperature grade, I/O behavior, and configuration setup, so the manufacturer ordering information must confirm the suffix differences.

Data referensi kejuruteraan untuk LC4032ZC-5M56C — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the LC4032ZC-5M56C when the design needs a compact, deterministic CPLD with a 400 MHz family maximum, 2.5 ns minimum propagation delay, 32 user I/Os, in-system programming, and operation across the documented 1.8 V, 2.5 V, and 3.3 V supply options. Consider LC4032ZC-5MN56C when its ordering grade is preferable and the suffix differences have been checked. Consider LC4032ZC-5M56I when its temperature or qualification grade fits the deployment requirement, while accounting for its listed 4.4 ns propagation-delay figure. LC4032ZC-35MN56C is appropriate when the -35 speed configuration is the required family option. Use an FPGA instead when the design requires substantially greater logic capacity, dedicated memory, DSP blocks, or higher-speed serial interfaces. Treat every substitution as conditional until the package drawing, ordering code, timing class, voltage grade, and configuration compatibility are confirmed.

Perbandingan dengan Gantian

Parametr Produk Ini LC4032ZC-5MN56C LC4032ZC-5M56I LC4032ZC-35MN56C
Package 56-ball CABGA 56-ball CABGA 56-ball CABGA 56-ball CABGA
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Global Clock Pins Up to 4 Up to 4 Up to 4 Up to 4
Programming Method In-system programmable In-system programmable In-system programmable In-system programmable
Logic Family CMOS CMOS CMOS CMOS

Penyeberangsung Jelas

  • High deterministic timing for compact logic consolidation (vsLC4032ZC-5M56I)
  • Direct LC4032ZC-family footprint continuity (vsLC4032ZC-35MN56C)
  • Multi-voltage integration support (vsLC4032ZC-5M56I)
  • Dedicated clock and I/O resources for interface logic (vsLC4032ZC-5MN56C)

Catatan Desain

Use the manufacturer’s 56-ball CABGA land pattern and pin-description table when creating or reviewing the PCB footprint. Pay particular attention to ball assignment, exposed power connections, and the distinction between device signal pins and the complete package ball grid. Place required bypass capacitors close to their associated supply balls with short ground returns, and avoid routing high-speed clock signals over split-plane boundaries.

Treat clock and other high-speed routes as controlled-impedance signals rather than ordinary logic interconnects. Keep global clock inputs short, provide a continuous reference plane, minimize stubs and unnecessary vias, and maintain adequate spacing from switching outputs. Timing closure must include external clock jitter, board skew, input threshold behavior, and the selected I/O standard rather than relying only on the 400 MHz device rating.

Do not assume that two LC4032ZC ordering suffixes are interchangeable solely because they use the same package family. Check the ordering guide for speed class, temperature grade, qualification grade, and configuration compatibility. A safe replacement also requires matching the programmed logic file, I/O behavior, supply voltage, pin functions, and PCB land pattern; otherwise the alternative should remain a prototype substitution pending engineering approval.

Plan the 1.8 V, 2.5 V, or 3.3 V supply rail according to the operating mode used by the design. Confirm required I/O levels, static and dynamic current behavior, and the manufacturer’s decoupling recommendations. Keep supply and ground planes continuous, connect all required package supply balls, and test startup and power-state transitions with realistic loads before production release.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement appears in the cited device pages. AEC-Q100 is not applicable to this general-purpose CPLD.

Data disahkan pada: 2026-11-14 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

LC4032ZC-5M56C datasheet LC4032ZC-5M56C pinout LC4032ZC-5M56C datasheet pdf LC4032ZC-5M56C equivalent LC4032ZC-5M56C replacement LC4032ZC-5M56C price LC4032ZC-5M56C stock Lattice Semiconductor LC4032ZC-5M56C LC4032ZC 56-ball CABGA CPLD LC4032ZC-5M56C vs LC4032ZC-5MN56C LC4032ZC-5M56C application circuit LC4032ZC-5M56C 400MHz

Komponen dan Tanda berkaitan

Lattice Semiconductor LC4032ZC-5M56C LC4032ZC-5MN56C LC4032ZC-5M56I LC4032ZC-35MN56C ispMACH 4000Z complex programmable logic device CPLD programmable logic device FPGA SuperFAST in-system programming nonvolatile configuration 400 MHz 2.5 ns propagation delay 1.8 V 2.5 V 3.3 V CMOS 56-ball CABGA 32 user I/Os global clock pins programmable clock polarity industrial control communication interface logic
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ