LC4064ZC-5T48I - 64-Macro CPLD, 400 MHz | Lattice
부품 번호: LC4064ZC-5T48I ✗ 단종LC4064ZC-5T48I 개요
A complex programmable logic device, or CPLD, is a programmable semiconductor that combines multiple programmable logic functions into one integrated circuit. The ispMACH 4000 architecture combines the characteristics of the ispLSI 2000 and ispMACH 4A families. Its macro-cell structure allows designers to implement control logic, interface logic, decoding, state machines, and fixed-function replacement logic without changing the PCB when logic requirements change.
The LC4064ZC-5T48I provides up to 64 macro cells, 32 user I/O pins, a 400 MHz maximum operating frequency, and 2.5 ns propagation delay. These characteristics make it appropriate for general-purpose logic consolidation, embedded control, bus decoding, data routing, and systems requiring in-system programmability. The -5 speed designation corresponds to the 5 ns-class performance stated for this family, while the 400 MHz figure identifies the maximum operating-frequency class rather than a guaranteed frequency for every logic design.
In-system programming allows the device configuration to be updated through its programming interface while it remains part of the assembled system. This supports prototype revision, field configuration changes, and production-programming workflows. The device operates from 3.3 V, 2.5 V, or 1.8 V, enabling integration with logic systems using different supply levels, although each board must satisfy the complete power, timing, and pin constraints for the selected operating mode.
Typical uses include industrial control, communications equipment, instrumentation, test systems, and embedded products requiring a compact implementation of multiple logic functions. Its 48-pin TQFP package also provides a practical option for designs that need moderate I/O density and a conventional surface-mount footprint. System timing should be evaluated with the actual routing, logic depth, and external loading rather than relying only on the headline frequency rating.
For a new design, follow the manufacturer pin-assignment, power-decoupling, and configuration-pin requirements directly. Account for all unused pins and programming-interface signals, validate timing at the intended voltage and temperature, and preserve a clean supply rail. The family’s in-system-programmable architecture simplifies logic updates, but it does not remove the need for careful board-level signal-integrity and power-integrity design.
This product page combines the device’s core architecture and timing specifications with a package-focused pinout guide, engineering design notes, and a structured comparison of pin-compatible speed-grade alternatives. These resources help engineers identify whether the LC4064ZC-5T48I fits a logic-density, timing, voltage, and PCB-footprint requirement before committing to a design.
드롭인 대체품: LC4064ZC-5T48I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: LC4064ZC-5T48I (동일 폼 팩터 및 풋프린트) — 차이점: Device Type, Supply Voltage Options.
LC4064ZC-75T48I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LC4064ZC-5TN48I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LC4064ZC-75TN48I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LC4064ZE-5TN48I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LC4064ZE-7TN48I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LC4064ZC-5T48I 최대 정격 & 전기적 특성
| Device Type | In-System Programmable SuperFAST CPLD |
| Architecture | ispMACH 4000 |
| Macro Cells | 64 macro cells |
| Maximum Operating Frequency | 400 MHz |
| Propagation Delay | 2.5 ns |
| Supply Voltage Options | 3.3 V / 2.5 V / 1.8 V |
| User I/O Pins | 32 pins |
| Total Package Pins | 48 pins |
| Package Type | TQFP-48 |
| 실장 유형 | Surface mount |
| Programming | In-system programmable |
| 동작 온도 범위 | -40°C to +105°C |
| Technology | CMOS |
| Lead-Free Status | Lead free |
LC4064ZC-5T48I tqfp-48 핀 구성 가이드
LC4064ZC-5T48I(tqfp-48 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: LC4064ZC-5T48I.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
LC4064ZC-5T48I 적합 용도: 6 애플리케이션s: Industrial Control Logic, Data Routing and Bus Interface Control, Test and Measurement Equipment, Communication Equipment Control Plane, Embedded Instrumentation Front End, Programmable Interface Consolidation.
Industrial Control Logic
The LC4064ZC-5T48I fits compact industrial controllers that require state-machine, sequencing, interlock, and signal-routing logic in one programmable device. Its 64 macro cells provide room for multiple control blocks, while 32 user I/Os support sensors, actuators, status indicators, and communications interfaces. The 400 MHz maximum operating-frequency class and 2.5 ns propagation-delay specification allow the design to close short combinational paths with useful timing margin. Use the 3.3 V, 2.5 V, or 1.8 V capability to match the controller’s power architecture. Its -40°C to +105°C operating range supports extended industrial environments, subject to correct decoupling, grounding, and protection.
추천
Data Routing and Bus Interface Control
The LC4064ZC-5T48I can implement address decoding, data selection, protocol translation, and multiplexing logic around a compact embedded system. With 32 user I/O pins, it is suitable for controlling and monitoring several buses without distributing fixed logic across multiple devices. The 2.5 ns propagation-delay class helps maintain margin in high-speed routing paths, while the 400 MHz maximum operating frequency covers demanding control sequences. Configuration can be updated through the in-system programming architecture, allowing logic revisions without replacing the assembled board. Designers should verify every supported I/O standard and pin assignment in the manufacturer datasheet before connecting external bus signals.
추천
Test and Measurement Equipment
In test and measurement instruments, the LC4064ZC-5T48I can consolidate sequencing logic, trigger generation, mode selection, front-panel control, and status decoding. The device’s 64 macro cells allow several small control blocks to be combined, while its 32 user I/O pins provide connections to switches, indicators, fixtures, and measurement modules. The fast 2.5 ns propagation-delay class is useful in synchronous control paths, although timing analysis must include board delay and external-device timing. Its multiple supply-voltage options support integration into mixed-voltage instrument architectures. The in-system-programmable architecture is particularly useful for adapting instrument behavior across prototype and production configurations.
추천
Communication Equipment Control Plane
The LC4064ZC-5T48I is appropriate for the control plane of communication equipment, where it can implement command decoding, framing assistance, alarm logic, and payload routing. A 400 MHz maximum operating-frequency class provides ample performance for high-speed control paths, and the 2.5 ns propagation-delay figure supports concise combinational logic. The 48-pin TQFP package and 32 user I/Os make the device useful for medium-density interfaces rather than very wide parallel buses. In-system programmability simplifies field updates when configuration logic changes. Confirm signal-standard compatibility, setup and hold requirements, and operating-mode timing before connecting it to high-speed transceiver or processor pins.
추천
Embedded Instrumentation Front End
The LC4064ZC-5T48I can sit between sensors, measurement converters, and a host processor to perform scaling, multiplexing, calibration-table selection, and digital filtering. Its 32 user I/Os accommodate several analog-to-digital converter outputs, digital sensors, and control lines, while 64 macro cells provide moderate logic depth for acquisition sequencing. The fast 2.5 ns propagation-delay class is beneficial when acquisition timing requires tightly coordinated control signals. Choose the appropriate 3.3 V, 2.5 V, or 1.8 V operating mode to interface with the rest of the front end, and follow the manufacturer’s input, output, and power recommendations.
추천
Programmable Interface Consolidation
The LC4064ZC-5T48I is useful when a design needs several small interface functions that would otherwise occupy separate glue-logic devices. It can combine latch logic, interrupt qualification, command decoding, display or indicator control, and peripheral selection within a single 48-pin TQFP device. The 64-macro-cell architecture and 32 user I/O pins balance density against routing complexity, making the part appropriate for medium-speed interface consolidation. Its in-system programming capability permits configuration updates and reduces the need for PCB respins. Validate each I/O’s supported voltage and drive configuration, especially when the logic connects to mixed-voltage peripherals or long external traces.
추천
추천 제품 요약
엔지니어링 참조 데이터: LC4064ZC-5T48I — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | LC4064ZC-75T48I | LC4064ZC-5TN48I | LC4064ZC-75TN48I | LC4064ZE-5TN48I | LC4064ZE-7TN48I |
|---|---|---|---|---|---|---|
| Package | TQFP-48 | TQFP-48 - same | TQFP-48 - same | TQFP-48 - same | TQFP-48 - same | TQFP-48 - same |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Propagation Delay | 2.5 ns | 7.5 ns speed class | 5 ns speed class | 7.5 ns speed class | 5 ns speed class | 7 ns speed class |
주요 차별점
- Faster propagation-delay class within the same TQFP-48 footprint (vs LC4064ZC-75T48I)
- High operating-frequency class for compact control logic (vs LC4064ZE-7TN48I)
- Multiple low-voltage operating options in a 48-pin package (vs LC4064ZE-5TN48I)
- Direct same-footprint sourcing path (vs LC4064ZC-5TN48I)
설계 노트
Choose the operating voltage explicitly before finalizing the power network. The device supports 3.3 V, 2.5 V, and 1.8 V operation, but each mode has its own timing, output, and configuration constraints. Place the required bypass capacitors close to their associated power and ground pins, keep the return path short, and avoid sharing high-current return paths with sensitive logic. Validate the completed board against the power and decoupling tables in the manufacturer datasheet.
Reserve all configuration, clock, power, ground, and user-I/O pins according to the datasheet pin table, even when a design does not use every general-purpose I/O. Keep programming-interface routing away from noisy switching nodes, maintain the package’s recommended fanout, and place test points where the complete configuration can be observed. For clocked logic, route the clock first and avoid unnecessary stubs or long parallel paths that could degrade signal integrity.
Do not treat the 400 MHz headline value as a guaranteed operating frequency for every compiled design. Analyze the longest logic path with the actual macro-cell assignments, interconnect delays, I/O loading, and intended supply condition. A slower speed-grade alternative can fail timing even though its package matches. When replacing LC4064ZC-5T48I, compare the complete pinout, electrical mode, temperature range, configuration method, and timing margin rather than relying on the device family name alone.
Apply series damping, controlled edge rates, or level translation only when the external interface requires it; excessive damping can create new timing problems in otherwise short CPLD paths. Keep external clock and data lines away from switching power nodes and route returns directly to the relevant ground pins. Use the device timing report to identify path constraints, and test edge quality with realistic load capacitance rather than relying solely on simulation at an idealized zero-load condition.
규정 준수 정보
The indexed component data identifies the exact MPN as lead free. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals status were not explicitly established for this exact ordering code.