LC4064ZC-5T48I - 64-Macro CPLD, 400 MHz | Lattice
MPN: LC4064ZC-5T48I ✗ 停產LC4064ZC-5T48I 概覽
A complex programmable logic device, or CPLD, is a programmable semiconductor that combines multiple programmable logic functions into one integrated circuit. The ispMACH 4000 architecture combines the characteristics of the ispLSI 2000 and ispMACH 4A families. Its macro-cell structure allows designers to implement control logic, interface logic, decoding, state machines, and fixed-function replacement logic without changing the PCB when logic requirements change.
The LC4064ZC-5T48I provides up to 64 macro cells, 32 user I/O pins, a 400 MHz maximum operating frequency, and 2.5 ns propagation delay. These characteristics make it appropriate for general-purpose logic consolidation, embedded control, bus decoding, data routing, and systems requiring in-system programmability. The -5 speed designation corresponds to the 5 ns-class performance stated for this family, while the 400 MHz figure identifies the maximum operating-frequency class rather than a guaranteed frequency for every logic design.
In-system programming allows the device configuration to be updated through its programming interface while it remains part of the assembled system. This supports prototype revision, field configuration changes, and production-programming workflows. The device operates from 3.3 V, 2.5 V, or 1.8 V, enabling integration with logic systems using different supply levels, although each board must satisfy the complete power, timing, and pin constraints for the selected operating mode.
Typical uses include industrial control, communications equipment, instrumentation, test systems, and embedded products requiring a compact implementation of multiple logic functions. Its 48-pin TQFP package also provides a practical option for designs that need moderate I/O density and a conventional surface-mount footprint. System timing should be evaluated with the actual routing, logic depth, and external loading rather than relying only on the headline frequency rating.
For a new design, follow the manufacturer pin-assignment, power-decoupling, and configuration-pin requirements directly. Account for all unused pins and programming-interface signals, validate timing at the intended voltage and temperature, and preserve a clean supply rail. The family’s in-system-programmable architecture simplifies logic updates, but it does not remove the need for careful board-level signal-integrity and power-integrity design.
This product page combines the device’s core architecture and timing specifications with a package-focused pinout guide, engineering design notes, and a structured comparison of pin-compatible speed-grade alternatives. These resources help engineers identify whether the LC4064ZC-5T48I fits a logic-density, timing, voltage, and PCB-footprint requirement before committing to a design.
直接替換替代品,適用於 LC4064ZC-5T48I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LC4064ZC-5T48I (相同外形與佔位) — 差異在於 Device Type, Supply Voltage Options.
LC4064ZC-75T48I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4064ZC-5TN48I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4064ZC-75TN48I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4064ZE-5TN48I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4064ZE-7TN48I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4064ZC-5T48I 最大額定值與電氣特性
| Device Type | In-System Programmable SuperFAST CPLD |
| Architecture | ispMACH 4000 |
| Macro Cells | 64 macro cells |
| Maximum Operating Frequency | 400 MHz |
| Propagation Delay | 2.5 ns |
| Supply Voltage Options | 3.3 V / 2.5 V / 1.8 V |
| User I/O Pins | 32 pins |
| Total Package Pins | 48 pins |
| Package Type | TQFP-48 |
| 安裝類型 | Surface mount |
| Programming | In-system programmable |
| 工作溫度範圍 | -40°C to +105°C |
| Technology | CMOS |
| Lead-Free Status | Lead free |
LC4064ZC-5T48I tqfp-48 腳位配置指南
LC4064ZC-5T48I(tqfp-48 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: LC4064ZC-5T48I.
請參閱 資料表 以查看完整腳位配置。
典型應用
LC4064ZC-5T48I 適用於 6 應用s: Industrial Control Logic, Data Routing and Bus Interface Control, Test and Measurement Equipment, Communication Equipment Control Plane, Embedded Instrumentation Front End, Programmable Interface Consolidation.
Industrial Control Logic
The LC4064ZC-5T48I fits compact industrial controllers that require state-machine, sequencing, interlock, and signal-routing logic in one programmable device. Its 64 macro cells provide room for multiple control blocks, while 32 user I/Os support sensors, actuators, status indicators, and communications interfaces. The 400 MHz maximum operating-frequency class and 2.5 ns propagation-delay specification allow the design to close short combinational paths with useful timing margin. Use the 3.3 V, 2.5 V, or 1.8 V capability to match the controller’s power architecture. Its -40°C to +105°C operating range supports extended industrial environments, subject to correct decoupling, grounding, and protection.
推薦
Data Routing and Bus Interface Control
The LC4064ZC-5T48I can implement address decoding, data selection, protocol translation, and multiplexing logic around a compact embedded system. With 32 user I/O pins, it is suitable for controlling and monitoring several buses without distributing fixed logic across multiple devices. The 2.5 ns propagation-delay class helps maintain margin in high-speed routing paths, while the 400 MHz maximum operating frequency covers demanding control sequences. Configuration can be updated through the in-system programming architecture, allowing logic revisions without replacing the assembled board. Designers should verify every supported I/O standard and pin assignment in the manufacturer datasheet before connecting external bus signals.
推薦
Test and Measurement Equipment
In test and measurement instruments, the LC4064ZC-5T48I can consolidate sequencing logic, trigger generation, mode selection, front-panel control, and status decoding. The device’s 64 macro cells allow several small control blocks to be combined, while its 32 user I/O pins provide connections to switches, indicators, fixtures, and measurement modules. The fast 2.5 ns propagation-delay class is useful in synchronous control paths, although timing analysis must include board delay and external-device timing. Its multiple supply-voltage options support integration into mixed-voltage instrument architectures. The in-system-programmable architecture is particularly useful for adapting instrument behavior across prototype and production configurations.
推薦
Communication Equipment Control Plane
The LC4064ZC-5T48I is appropriate for the control plane of communication equipment, where it can implement command decoding, framing assistance, alarm logic, and payload routing. A 400 MHz maximum operating-frequency class provides ample performance for high-speed control paths, and the 2.5 ns propagation-delay figure supports concise combinational logic. The 48-pin TQFP package and 32 user I/Os make the device useful for medium-density interfaces rather than very wide parallel buses. In-system programmability simplifies field updates when configuration logic changes. Confirm signal-standard compatibility, setup and hold requirements, and operating-mode timing before connecting it to high-speed transceiver or processor pins.
推薦
Embedded Instrumentation Front End
The LC4064ZC-5T48I can sit between sensors, measurement converters, and a host processor to perform scaling, multiplexing, calibration-table selection, and digital filtering. Its 32 user I/Os accommodate several analog-to-digital converter outputs, digital sensors, and control lines, while 64 macro cells provide moderate logic depth for acquisition sequencing. The fast 2.5 ns propagation-delay class is beneficial when acquisition timing requires tightly coordinated control signals. Choose the appropriate 3.3 V, 2.5 V, or 1.8 V operating mode to interface with the rest of the front end, and follow the manufacturer’s input, output, and power recommendations.
推薦
Programmable Interface Consolidation
The LC4064ZC-5T48I is useful when a design needs several small interface functions that would otherwise occupy separate glue-logic devices. It can combine latch logic, interrupt qualification, command decoding, display or indicator control, and peripheral selection within a single 48-pin TQFP device. The 64-macro-cell architecture and 32 user I/O pins balance density against routing complexity, making the part appropriate for medium-speed interface consolidation. Its in-system programming capability permits configuration updates and reduces the need for PCB respins. Validate each I/O’s supported voltage and drive configuration, especially when the logic connects to mixed-voltage peripherals or long external traces.
推薦
推薦產品摘要
工程參考資料,適用於 LC4064ZC-5T48I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LC4064ZC-75T48I | LC4064ZC-5TN48I | LC4064ZC-75TN48I | LC4064ZE-5TN48I | LC4064ZE-7TN48I |
|---|---|---|---|---|---|---|
| Package | TQFP-48 | TQFP-48 - same | TQFP-48 - same | TQFP-48 - same | TQFP-48 - same | TQFP-48 - same |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Propagation Delay | 2.5 ns | 7.5 ns speed class | 5 ns speed class | 7.5 ns speed class | 5 ns speed class | 7 ns speed class |
主要差異化特點
- Faster propagation-delay class within the same TQFP-48 footprint (對比LC4064ZC-75T48I)
- High operating-frequency class for compact control logic (對比LC4064ZE-7TN48I)
- Multiple low-voltage operating options in a 48-pin package (對比LC4064ZE-5TN48I)
- Direct same-footprint sourcing path (對比LC4064ZC-5TN48I)
設計說明
Choose the operating voltage explicitly before finalizing the power network. The device supports 3.3 V, 2.5 V, and 1.8 V operation, but each mode has its own timing, output, and configuration constraints. Place the required bypass capacitors close to their associated power and ground pins, keep the return path short, and avoid sharing high-current return paths with sensitive logic. Validate the completed board against the power and decoupling tables in the manufacturer datasheet.
Reserve all configuration, clock, power, ground, and user-I/O pins according to the datasheet pin table, even when a design does not use every general-purpose I/O. Keep programming-interface routing away from noisy switching nodes, maintain the package’s recommended fanout, and place test points where the complete configuration can be observed. For clocked logic, route the clock first and avoid unnecessary stubs or long parallel paths that could degrade signal integrity.
Do not treat the 400 MHz headline value as a guaranteed operating frequency for every compiled design. Analyze the longest logic path with the actual macro-cell assignments, interconnect delays, I/O loading, and intended supply condition. A slower speed-grade alternative can fail timing even though its package matches. When replacing LC4064ZC-5T48I, compare the complete pinout, electrical mode, temperature range, configuration method, and timing margin rather than relying on the device family name alone.
Apply series damping, controlled edge rates, or level translation only when the external interface requires it; excessive damping can create new timing problems in otherwise short CPLD paths. Keep external clock and data lines away from switching power nodes and route returns directly to the relevant ground pins. Use the device timing report to identify path constraints, and test edge quality with realistic load capacitance rather than relying solely on simulation at an idealized zero-load condition.
合規資訊
The indexed component data identifies the exact MPN as lead free. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals status were not explicitly established for this exact ordering code.