LC4256C-3T100C - 256-Macrocell CPLD | Lattice Semiconductor
부품 번호: LC4256C-3T100C ✗ 단종LC4256C-3T100C 개요
A CPLD, or complex programmable logic device, is a programmable-logic semiconductor that combines multiple programmable logic blocks and routing resources into a device suitable for implementing control, interface, decoding, and glue-logic functions. The ispMACH 4000C family is positioned between simpler CPLDs and larger FPGA devices, providing deterministic logic implementation with a familiar in-system-programming architecture. The LC4256C-3T100C is therefore useful when a design needs moderate logic density, low-latency programmable control, and a compact high-pin-count package.
The device provides 256 macro cells and is identified with a maximum operating frequency of 322 MHz. The 100-pin TQFP package exposes 100 physical pins and supports the family’s external configuration and logic interface arrangement. The supplied manufacturer and distributor information identifies the part as a Super Fast High Density PLD and describes the ispMACH 4000 family as a combination of ispLSI 2000 and ispMACH 4A architectural characteristics. The -3 speed designation identifies the device’s performance grade within the LC4256C family.
The LC4256C-3T100C is suited to industrial control systems, peripheral-interface logic, data-acquisition equipment, communication equipment, and general-purpose embedded control. Its programmable nature allows logic changes to be implemented without changing the PCB when design revisions are required. In-system programmability supports field configuration or production programming through the device programming interface. Designers should still verify timing, pin multiplexing, power sequencing, and signal-integrity requirements against the manufacturer datasheet for the exact LC4256C device and package variant.
The principal design consideration is package and timing compatibility. LC4256C, LC4256V, LC4256B, and other family members may share the 100-pin TQFP format while differing in speed grade, voltage option, temperature designation, or device details. A replacement must therefore be checked against the exact pinout, supported supply voltages, maximum frequency, macro-cell capacity, and programming requirements rather than package name alone. The manufacturer’s ispMACH programming environment and the device datasheet remain the authoritative sources for configuration-file generation and timing validation.
This product page combines the LC4256C-3T100C device identification, package details, programmable-logic specifications, alternative-family cross-reference information, and practical PCB and programming guidance to support component selection and replacement planning.
드롭인 대체품: LC4256C-3T100C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: LC4256C-3T100C (동일 폼 팩터 및 풋프린트) — 차이점: Device Type.
LC4256B-3T100C
✅ 드롭인가격 문의
데이터시트 보기 →LC4256V-3T100C
✅ 드롭인가격 문의
데이터시트 보기 →LC4256V-3TN100C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LC4256ZC-75TN100C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LC4256C-3T100C 최대 정격 & 전기적 특성
| Device Type | Complex programmable logic device (CPLD) |
| Device Family | ispMACH 4000C family |
| Macro Cells | 256 macro cells |
| Maximum Frequency | 322 MHz |
| Core Supply Voltage | 1.8 V |
| Supported Supply Options | 3.3 V / 2.5 V / 1.8 V |
| 패키지 | 100-pin TQFP |
| Package Type | Tray |
| Programmability | In-system programmable |
| Architecture | Blend of ispLSI 2000 and ispMACH 4A architectures |
| Logic Density | Super Fast High Density PLD |
| 실장 유형 | Surface mount |
| 핀 수 | 100 pins |
LC4256C-3T100C tray 핀 구성 가이드
LC4256C-3T100C(tray 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: LC4256C-3T100C.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
LC4256C-3T100C 적합 용도: 6 애플리케이션s: Industrial Control Logic, Data-Acquisition Interface Control, Peripheral Interconnect and Glue Logic, Communication Equipment Control, Programmable Sensor Conditioning, Test and Measurement Equipment.
Industrial Control Logic
The LC4256C-3T100C fits industrial control boards that require deterministic programmable logic for sequencing, interlocks, status decoding, and peripheral command handling. Its 256 macro cells provide moderate logic capacity, while the 322 MHz maximum frequency supports timing-critical control paths when the design uses the device’s documented operating conditions. In-system programmability allows the same hardware platform to support configuration updates and manufacturing test programming. Designers should allocate pins according to the exact 100-pin TQFP pinout, keep power and ground distribution clean, and validate timing against the selected LC4256C speed grade before releasing the board for production.
추천
Data-Acquisition Interface Control
LC4256C-3T100C can implement acquisition-system control logic, sample sequencing, channel selection, trigger routing, and interface arbitration where a compact CPLD is preferable to an FPGA. The 256 macro cells support multiple concurrent state machines and data-path decisions, and the 322 MHz maximum frequency provides margin for synchronous control logic. The in-system-programmable architecture is useful during board bring-up because configuration can be updated through the programming interface. The design should verify supported I/O standards, input thresholds, output timing, and the exact power requirements for the selected 1.8 V core configuration.
추천
Peripheral Interconnect and Glue Logic
The LC4256C-3T100C is suitable for bridging dissimilar peripheral interfaces by implementing protocol conversion, address decoding, bus arbitration, interrupt routing, and timing synchronization. A 256-macro-cell CPLD provides enough programmable logic for several interface channels without requiring a large FPGA. Its maximum frequency of 322 MHz makes it suitable for synchronous control paths when the external devices operate within the documented interface limits. In-system programming supports revision changes to decode tables or control sequences, while the 100-pin TQFP package provides a high pin count for parallel buses and multiple control signals.
추천
Communication Equipment Control
LC4256C-3T100C can serve in communication equipment as a programmable controller for line-interface sequencing, packet control, backpressure generation, and status multiplexing. The 256 macro cells are appropriate for moderate protocol-control complexity, while the 322 MHz maximum frequency allows deterministic handling of synchronous control signals. In-system programmability supports configuration changes when firmware, board revisions, or interface options evolve. For a production design, check the exact I/O voltage compatibility, maximum supported input and output rates, clocking arrangement, and package-level pin multiplexing in the manufacturer datasheet.
추천
Programmable Sensor Conditioning
The LC4256C-3T100C is applicable in sensor-conditioning and measurement systems that require programmable channel sequencing, comparator decision logic, timing control, and data-path selection. Its moderate 256-macro-cell density can combine several control functions in one device, reducing the number of separate glue-logic components. The 322 MHz maximum frequency supports clocked control and synchronization logic, while in-system programming permits field or production configuration changes. Because sensor interfaces may use different voltage domains, the exact I/O standard, input tolerance, output drive, and power configuration must be verified before implementation.
추천
Test and Measurement Equipment
LC4256C-3T100C is well suited to test and measurement instruments that need programmable timing, trigger routing, channel sequencing, and pattern generation. The 256 macro cells allow multiple control functions to be consolidated in a single CPLD, and the 322 MHz maximum frequency supports high-rate synchronous control when external timing requirements are met. In-system programmability makes it practical to adapt the instrument configuration without a PCB respin. The final implementation should follow the datasheet for clock inputs, programming signals, I/O voltage limits, and pin assignments, especially when the instrument uses high-speed analog or digital measurement front ends.
추천
추천 제품 요약
엔지니어링 참조 데이터: LC4256C-3T100C — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | LC4256B-3T100C | LC4256V-3T100C | LC4256V-3TN100C | LC4256ZC-75TN100C |
|---|---|---|---|---|---|
| Package | 100-pin TQFP | 100-pin TQFP | 100-pin TQFP | 100-pin TQFP | 100-pin TQFP |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Device Family | ispMACH 4000C family | LC4256 family | LC4256 family | LC4256 family | LC4256 family |
| Pin Count | 100 pins | 100 pins | 100 pins | 100 pins | 100 pins |
| Speed Designation | -3 | -3 | -3 | -3 | -75 |
주요 차별점
- C-series device identification (vs LC4256B-3T100C)
- Known core-voltage description (vs LC4256V-3T100C)
- Higher stated speed designation (vs LC4256ZC-75TN100C)
설계 노트
Use the manufacturer’s 100-pin TQFP pinout and recommended layout guidance when placing the LC4256C-3T100C. Keep the configuration interface and clock paths short, preserve continuous ground references, and avoid routing high-speed or switching signals beneath the device unless the datasheet explicitly permits it. Because the supplied information identifies the package and pin count but does not provide the complete pin-description table, verify every net against the official Lattice documentation before release.
Plan the 1.8 V core supply and any required I/O rails according to the exact LC4256C datasheet. Place the required bypass capacitors close to the associated power pins, provide a low-impedance return path for each supply domain, and check sequencing requirements with the external clocking and programming circuitry. The family information lists 3.3 V, 2.5 V, and 1.8 V options, but the exact rail combination and decoupling values must be confirmed for this MPN.
Do not substitute an LC4256-family part solely because it has the same 100-pin TQFP package. Confirm pin multiplexing, voltage options, macro-cell capacity, timing grade, temperature range, and in-system-programming behavior. LC4256B-3T100C, LC4256V-3T100C, LC4256V-3TN100C, and LC4256ZC-75TN100C are useful comparison starting points, but only the exact datasheet comparison can establish drop-in suitability.
Use controlled-impedance routing for clock and high-speed interface signals, and account for the device’s maximum 322 MHz rating only as a device-level limit. External signal timing, loading, connector transitions, and PCB loss can reduce practical margin. Validate the final interface with the manufacturer’s timing constraints and, where applicable, add source-series termination or proper layer transitions based on the connected peripheral.
규정 준수 정보
The accessible product results identify the manufacturer and device family but do not provide a definitive compliance declaration for the exact MPN.