Lattice Semiconductor

LC4256V-5T100C - 256-Macro-Cell 227MHz CPLD | Lattice

부품 번호: LC4256V-5T100C ✗ 단종
3.3 V Vdss 100-pin TQFP Package 227 MHz Speed
MOQ: 1 |

LC4256V-5T100C 개요

The Lattice Semiconductor LC4256V-5T100C is an in-system-programmable complex programmable logic device from the ispMACH 4000V family, providing 256 macro cells, 16 logic-element blocks, and 64 user I/O in a 100-pin TQFP package. Its maximum system frequency is 227 MHz, its maximum propagation delay is 5.0 ns, and its nominal operating supply is 3.3 V.

A CPLD is a programmable-logic device within the broader semiconductor and FPGA & CPLD hierarchy. Unlike a mask-programmed logic device, it stores its configuration in nonvolatile memory and can be programmed or reprogrammed in the circuit. The LC4256V combines relatively fast logic performance with a deterministic, nonvolatile architecture suited to control logic, interface adaptation, bus decoding, and compact glue-logic designs.

The ispMACH 4000V architecture provides 256 macro cells organized into 16 logic blocks, with up to 64 user I/O for external connections. The -5 speed designation corresponds to a maximum propagation delay of 5.0 ns, while the listed 227 MHz system-frequency figure supports designs operating in the hundreds of megahertz. The device supports 3.3 V operation and is offered in a surface-mount TQFP-100 package.

In-system programmability allows configuration data to be loaded after board assembly, which simplifies prototype revision, production configuration, and field-update planning. Designers still need to account for the supply rails, clocking, JTAG programming path, signal conditioning, and output-drive requirements associated with the exact board environment.

Typical implementations include industrial control and data-acquisition modules, communications-interface adapters, peripheral expansion for microcontrollers, test and measurement logic, embedded system boot and configuration controllers, and compact bus-arbitration or protocol-bridging circuits. Its 64 I/O provide useful connectivity without moving to a much larger programmable-logic package.

PCB implementation should preserve short, controlled clock routes and provide clean return paths beneath the device. Decoupling should follow the power-supply recommendations in the manufacturer datasheet, while JTAG and programming signals should remain accessible for production programming and field upgrades.

This page combines package, timing, capacity, programming, and sourcing details with same-family drop-in alternatives, comparison data, and practical implementation guidance. It is designed to accelerate component selection, footprint verification, BOM review, and design-in activity for the LC4256V-5T100C.

드롭인 대체품: LC4256V-5T100C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

LC4256V-5TN100I

✅ 드롭인
📦 TQFP-100
Same 5 ns speed class and 100-pin footprint; industrial-temperature suffix replaces the commercial suffix, with 0% change in the listed maximum delay.

📋 참조 대체품 (카탈로그에 없음)

LC4256V-75TN100C

✅ 드롭인
📦 TQFP-100
Same family and footprint, but the -75 speed designation is 50% slower in maximum-delay terms than the 5.0 ns target, based on the 5.0 ns versus nominal 7.5 ns class.

📋 참조 대체품 (카탈로그에 없음)

LC4256B-5T100C

✅ 드롭인
Lattice Semiconductor
📦 TQFP-100
In-system-programmable CPLD · ispMACH 4000B SuperFAST high-density PLD · 256 macro cells · 227 MHz · -5 · 3.3 V, 2.5 V, and 1.8 V · 100-pin TQFP · Surface mount

가격 문의

데이터시트 보기 →

LC4256B-5T100I

✅ 드롭인
Lattice Semiconductor
📦 TQFP-100
ispMACH 4000B complex programmable logic device · 256 macrocells · 16 logic elements · 5 ns · 64 I/O pins · 2.3 V to 2.7 V · 3.3 V, 2.5 V, and 1.8 V · In-system programmable

가격 문의

데이터시트 보기 →

LC4256C-5T100C

✅ 드롭인 ⚠️ 사양 미검증
Lattice Semiconductor
📦 TQFP-100
Complex programmable logic device · ispMACH 4000C · SuperFLASH high-density PLD · Nonvolatile SuperFLASH · In-system programmable · 5 ns · 3.3 V, 2.5 V, and 1.8 V · 1.65 V to 1.95 V

가격 문의

데이터시트 보기 →

LC4256V-5T100C 최대 정격 & 전기적 특성

Device Type Complex Programmable Logic Device (CPLD)
Product Family ispMACH 4000V
Macro Cells 256 macro cells
Logic Blocks 16 logic blocks
User I/O 64 user I/O
Maximum System Frequency 227 MHz
Maximum Propagation Delay 5.0 ns
Nominal Supply Voltage 3.3 V
Internal Supply Voltage Range 3.0 V to 3.6 V
Supported Supply Voltage Modes 3.3 V, 2.5 V, and 1.8 V
Programming Type In-System Programmable
패키지 100-pin TQFP
실장 유형 SMD surface mount
동작 온도 범위 0°C to 90°C junction temperature
Packaging Tray

LC4256V-5T100C 100-pin tqfp 핀 구성 가이드

LC4256V-5T100C(100-pin tqfp 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

LC4256V-5T100C의 100-pin tqfp 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: LC4256V-5T100C.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

LC4256V-5T100C 적합 용도: 6 애플리케이션s: Industrial Control and Data Acquisition, Communications Interface Adaptation, Peripheral Expansion for Microcontrollers, Test and Measurement Logic, Embedded System Configuration and Boot Control, General-Purpose Glue Logic.

🏭

Industrial Control and Data Acquisition

The LC4256V-5T100C fits industrial control modules that require deterministic combinational and sequential logic close to sensors, actuators, or converters. Its 256 macro cells and 16 logic blocks provide implementation capacity for control, timing, interlocks, and status decoding, while 64 user I/O permit direct connections without an external bus bridge. The 5.0 ns maximum propagation delay and 227 MHz maximum system frequency support fast status and handshake logic. The 0°C to 90°C junction-temperature range must be respected, and a 3.3 V rail with clean decoupling should be used. JTAG access should remain available for production programming, diagnostics, and firmware updates.

🌐

Communications Interface Adaptation

The LC4256V-5T100C is useful for adapting dissimilar communications interfaces in embedded equipment. Its 64 user I/O can support parallel data buses, control signals, interrupts, and protocol state machines, while the 5.0 ns maximum propagation delay enables predictable combinational decoding and clock-domain interface elements. The 227 MHz system-frequency capability is appropriate for moderately fast control paths, although external PHY devices may handle higher-speed serial signaling. Use the family’s supported 3.3 V, 2.5 V, or 1.8 V operating modes only where the complete design and I/O constraints permit them. Preserve a short, impedance-controlled interface layout and provide accessible JTAG programming connections.

🔧

Peripheral Expansion for Microcontrollers

The LC4256V-5T100C can expand a microcontroller’s peripheral set when fixed logic would otherwise require multiple discrete devices. Its 256 macro cells are suitable for timers, address decoders, bus arbiters, display-control sequencing, and compact state machines, with 64 I/O available for connections to external circuitry. The 227 MHz maximum system frequency and 5.0 ns maximum propagation delay allow the CPLD to assist with high-speed handshakes while the microcontroller handles higher-level software. Because the configuration is in-system programmable, interface changes can be implemented by revising the bitstream rather than rerouting the board. Check pin assignments, supply levels, and timing margins against the final schematic.

📺

Test and Measurement Logic

The LC4256V-5T100C can implement control sequencing, pattern generation, acquisition triggers, and instrument-interface logic in compact test and measurement equipment. The 256 macro cells provide meaningful parallelism, and the 64 user I/O allow the CPLD to coordinate multiple instrument-control signals without making it the principal processor. A 5.0 ns maximum propagation delay supports precise digital timing functions, while the 227 MHz figure serves fast internal control logic rather than high-speed analog sampling. The nonvolatile in-system-programmable configuration simplifies repeatable fixture setup. Ensure trigger and clock routes are compact, provide stable supply filtering, and follow the manufacturer’s input, output, and power recommendations.

🖥️

Embedded System Configuration and Boot Control

The LC4256V-5T100C can manage power sequencing, reset distribution, peripheral enables, and boot-mode decoding around an embedded processor. Its 256 macro cells and 16 logic blocks accommodate reliable state-machine and interlock implementations, while 64 user I/O support multiple rails and peripheral-control signals. The in-system-programmable architecture allows revision of the sequencing policy without changing the PCB, provided the JTAG path remains accessible. The 5.0 ns maximum propagation delay supports deterministic control, but critical reset paths should still be checked for contention and timing across every powered state. Use the 3.3 V nominal supply configuration unless the complete design supports another specified voltage mode.

🧩

General-Purpose Glue Logic

The LC4256V-5T100C is well suited to general-purpose glue logic where combinational decoding, counters, state machines, latches, and interface glue would otherwise become unwieldy. The 256 macro cells offer more capacity than a small generic logic device, while the 100-pin TQFP provides 64 user I/O and adequate power connections for a compact system. Its 5.0 ns maximum propagation delay and 227 MHz maximum system frequency support responsive control paths. During schematic capture, assign only documented user, clock, configuration, power, and ground pins. Keep programming signals accessible, minimize loop area around high-speed nets, and validate every timing-critical path with the vendor’s timing-analysis flow.

What is the LC4256V-5T100C?
The LC4256V-5T100C is an in-system-programmable CPLD from Lattice Semiconductor’s ispMACH 4000V family. It contains 256 macro cells and 16 logic blocks, provides 64 user I/O, and is packaged in a 100-pin TQFP. According to the Lattice Semiconductor datasheet, the device supports a 227 MHz maximum system frequency and a 5.0 ns maximum propagation delay for compact, deterministic logic designs.
What are the key specifications of LC4256V-5T100C that engineers should know?
The LC4256V-5T100C combines 256 macro cells, 16 logic blocks, 64 user I/O, a 227 MHz maximum system frequency, and a 5.0 ns maximum propagation delay. It operates from a nominal 3.3 V supply, with an internal range of 3.0 V to 3.6 V, and uses a surface-mount 100-pin TQFP package. According to the Lattice Semiconductor datasheet, its configuration is nonvolatile and programmable in-system.
Where can I download the LC4256V-5T100C datasheet PDF?
The LC4256V-5T100C datasheet is available through the linked manufacturer-family document on Alldatasheet. The document covers the ispMACH 4000V architecture, device ordering information, pin descriptions, electrical characteristics, timing, JTAG programming, package drawings, and application information. For a new PCB, use the pin-description table and package drawing in that datasheet when assigning signals and laying out the 100-pin footprint.
Where can I find the LC4256V-5T100C pinout?
The LC4256V-5T100C pinout is found in the pin-description table and package drawing in the Lattice Semiconductor datasheet. The device uses a 100-pin TQFP configuration with 64 user I/O plus dedicated power, ground, configuration, clock, and programming functions. Assign every package pin from the datasheet table rather than assuming that all 64 numbered user I/O are interchangeable.
Is the LC4256V-5T100C suitable for industrial control applications?
The LC4256V-5T100C is suitable for many industrial control functions when the complete system stays within its specified 0°C to 90°C junction-temperature range. Its 227 MHz maximum system frequency, 5.0 ns maximum delay, 64 I/O, and in-system programmability support control logic, acquisition interfaces, and protocol conversion. The manufacturer datasheet remains the controlling reference for supply tolerance, timing, power, and environmental limits.
Where can I buy LC4256V-5T100C online?
Use the Request a Quote form on this page to request the LC4256V-5T100C, current availability, and order details. The requested MPN is the 100-pin TQFP device supplied in a tray, so confirm the complete suffix and package before ordering. The quote form can also provide a current lead-time response and clarify minimum-order quantity for production procurement.
What is the price of LC4256V-5T100C?
Use the Request a Quote form on this page for the current LC4256V-5T100C price and quantity pricing. Pricing for programmable-logic devices can change with lifecycle status, package suffix, order volume, and supply availability. Include your requested quantities and delivery location so the returned quotation can reflect the correct commercial terms for this exact 100-pin TQFP MPN.
What is the lead time for LC4256V-5T100C?
The current lead time for LC4256V-5T100C should be confirmed through the Request a Quote form on this page. Lead time depends on factory inventory, production scheduling, package quantity, and the requested delivery date. For planning purposes, request separate quotations for prototype and production quantities, including the desired packaging and ship-to destination.
Is LC4256V-5T100C in stock?
Current stock for LC4256V-5T100C is best confirmed through the Request a Quote form on this page. The form can return the latest availability, minimum order quantity, and estimated lead time for the exact MPN. Because the device is supplied in a tray and has a complete package suffix, verify that any quotation identifies LC4256V-5T100C rather than a related 100-pin speed grade.
What is the best drop-in replacement for LC4256V-5T100C?
The LC4256V-5TN100I is the closest documented drop-in option because it retains the LC4256V family, 5 ns speed designation, and 100-pin TQFP package while changing the temperature-grade suffix. Verify the complete pin, speed, and operating-temperature requirements before substitution. No cross-brand drop-in replacement was identified, so LC4256B or LC4256C variants should be treated as redesign candidates rather than automatic replacements.
What can replace LC4256V-5T100C?
The LC4256V-5TN100I can serve as a same-footprint replacement candidate because it uses the same LC4256V family, 5 ns speed class, and 100-pin TQFP format. Its industrial-temperature suffix is the principal distinction. The LC4256V-75TN100C has a different speed designation, while LC4256B and LC4256C options require pinout, resource, timing, and firmware compatibility checks before use.
LC4256V-5T100C vs LC4256V-5TN100I: which is better for industrial use?
The LC4256V-5TN100I is generally the better candidate for industrial temperature requirements because it shares the LC4256V family, 5 ns speed class, and 100-pin TQFP package with the LC4256V-5T100C. The principal difference is the temperature-grade suffix. According to the Lattice Semiconductor family documentation, both use the same nominal 3.3 V supply architecture, but the exact operating limits must be checked in each part’s ordering information.
Is LC4256V-5T100C the same as LC4256V-75TN100C?
No. The LC4256V-5T100C and LC4256V-75TN100C share the LC4256V family and 100-pin TQFP format, but their speed designations differ. The target has a listed maximum propagation delay of 5.0 ns, while the -75 variant represents a slower speed option. Because the 5 ns part has a 50% lower maximum delay than a nominal 7.5 ns option, timing-critical designs should not substitute them without a new timing analysis.
When should I choose LC4256V-5T100C over an ispMACH alternative?
Choose the LC4256V-5T100C when a design needs a 100-pin TQFP CPLD with 256 macro cells, 64 user I/O, in-system programming, and a 5.0 ns maximum propagation delay. It is particularly appropriate for deterministic glue logic that benefits from nonvolatile configuration and a compact pin count. Select an ispMACH alternative only after verifying package, timing, logic-resource, voltage, and programming-tool compatibility.
How is the LC4256V-5T100C programmed and configured?
The LC4256V-5T100C is configured through its in-system programming interface. According to the Lattice Semiconductor datasheet, the device uses the ispMACH 4000V programming architecture, allowing configuration to be loaded in the target circuit rather than only before assembly. Board designs should preserve the required JTAG signals, programming voltage levels, clocking, decoupling, and connector access described by the manufacturer documentation.

엔지니어링 참조 데이터: LC4256V-5T100C — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the LC4256V-5T100C when the design specifically uses the ispMACH 4000V architecture, needs 256 macro cells and 64 user I/O in a 100-pin TQFP, and benefits from the 5.0 ns maximum propagation delay. Select LC4256V-5TN100I when the same electrical speed and footprint are required but an industrial-temperature suffix is preferable. LC4256V-75TN100C is appropriate only when its slower timing class still closes system timing with adequate margin. Consider LC4256B-5T100C or LC4256B-5T100I when the different ispMACH 4000B architecture has compatible resources and tooling; confirm pin assignments and timing before redesign approval. LC4256C-5T100C is another same-package family candidate, but it requires explicit validation of logic mapping, electrical limits, and software support. No cross-brand drop-in replacement was established, so changing manufacturers should be treated as a redesign rather than a routine substitution.

대체품과의 비교

파라미터 이 제품 LC4256V-5TN100I LC4256V-75TN100C LC4256B-5T100C LC4256B-5T100I LC4256C-5T100C
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Package TQFP-100 TQFP-100 TQFP-100 TQFP-100 TQFP-100 TQFP-100
Product Family ispMACH 4000V ispMACH 4000V ispMACH 4000V ispMACH 4000B ispMACH 4000B ispMACH 4000C
Maximum Propagation Delay 5.0 ns 5.0 ns Nominal 7.5 ns speed class 5.0 ns speed designation 5.0 ns speed designation 5.0 ns speed designation
Temperature Grade Commercial Industrial Commercial Commercial Industrial Commercial
Programming In-System Programmable In-System Programmable In-System Programmable In-System Programmable In-System Programmable In-System Programmable

주요 차별점

  • Higher timing performance than the -75 speed option (vs LC4256V-75TN100C)
  • Industrial-temperature same-footprint option (vs LC4256V-5TN100I)
  • Same speed class across the ispMACH 4000V and 4000B families (vs LC4256B-5T100C)

설계 노트

Use the 3.3 V nominal configuration unless the complete design supports one of the family’s specified lower-voltage modes. Place local bypass capacitors at the supply and ground pins using the package-specific layout in the manufacturer datasheet. Keep the switching-current return path compact so the 5 ns logic performance is not undermined by supply ripple or inductive voltage drops.

Preserve access to all JTAG programming signals and include the recommended programming interface in the board layout. A production board that cannot be programmed after assembly creates an avoidable rework risk. Verify every TQFP-100 pad against the package drawing and pin-description table before releasing the PCB artwork.

Route clocks and high-speed control signals as short and continuous as practical, with uninterrupted reference planes and minimal stubs. The LC4256V-5T100C can operate at 227 MHz, but external routing and loading determine whether timing margins remain usable. Use the vendor timing tools with realistic board conditions and include clock uncertainty in the final analysis.

Do not treat the C, I, N, V, and speed suffixes as cosmetic. They distinguish family architecture, temperature grade, package construction, or timing class. When changing MPNs, verify pin assignment, voltage, temperature, maximum delay, system frequency, programming support, and supply pinout even when all candidates use a 100-pin TQFP outline.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The device is a programmable-logic IC rather than an automotive-qualified component. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not explicitly established for the exact MPN.

관련 검색

lc4256v datasheet LC4256V-5T100C datasheet LC4256V-5T100C datasheet pdf LC4256V-5T100C pinout LC4256V-5T100C equivalent LC4256V-5T100C replacement LC4256V-5T100C cross reference LC4256V-5T100C vs LC4256V-5TN100I LC4256V-5T100C TQFP-100 footprint LC4256V-5T100C 227MHz CPLD LC4256V-5T100C price Lattice LC4256V-5T100C

관련 부품 & 용어

Lattice Semiconductor LC4256V-5T100C LC4256V-5TN100I LC4256V-75TN100C LC4256B-5T100C LC4256B-5T100I LC4256C-5T100C CPLD Complex Programmable Logic Device ispMACH 4000V ispMACH 4000B ispMACH 4000C FPGA & CPLD programmable logic nonvolatile configuration in-system programming JTAG TQFP-100 surface mount 256 macro cells 16 logic blocks 64 user I/O 227 MHz system frequency 5.0 ns propagation delay
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기