LFE2-50E-5F484C - 48K LUT FPGA, 339 I/O, FBGA-484 | Lattice
부품 번호: LFE2-50E-5F484C ✓ 활성LFE2-50E-5F484C 개요
An FPGA is a reconfigurable semiconductor in which digital logic functions are stored as a bitstream and implemented through a configurable array of logic and routing resources. The LatticeECP2 family belongs to the broader FPGA and programmable-logic hierarchy, where designers use programmable hardware to consolidate functions that otherwise require multiple programmable logic devices, fixed logic ICs, or microcontroller peripherals.
The ECP2 architecture in this device provides 48,000 logic cells organized into 6,000 logic array blocks, together with 396,288 bits of embedded RAM. Its 339 user I/O support extensive external connectivity for memory, control signals, serial interfaces, and parallel data paths. The specified core supply is 1.2 V, with a stated operating supply range of 1.14 V to 1.26 V.
Implementation should account for the large 484-pin FBGA footprint and its demanding escape-routing requirements. The device uses 90 nm FPGA technology and is identified with a speed grade of 5. Designers also need to budget pin assignment, bank-specific interface constraints, configuration memory, clocking, decoupling, and programmable-device verification when moving from schematic capture to a production PCB.
Typical applications include industrial control systems, communications infrastructure, video and image processing, data acquisition, embedded instrumentation, and network interface equipment. The combination of 48,000 logic cells, 396,288 RAM bits, 339 I/O, and DSP capability permits compact implementation of parallel processing pipelines and multi-interface control modules without relying on several separate programmable devices.
Power planning and PCB layout are especially important because a 484-pin FBGA demands dense escape routing and numerous high-speed connections. Confirm the intended configuration interface, clock topology, I/O standards, voltage requirements, and decoupling network against the manufacturer documentation before releasing the board layout. Validate timing and programming behavior with the implementation flow selected for the ECP2 family.
This product page combines the exact LFE2-50E-5F484C characteristics with same-footprint ECP2 alternatives, a parameter comparison, and practical guidance for FPGA implementation, power integrity, routing density, and production migration.
드롭인 대체품: LFE2-50E-5F484C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: LFE2-50E-5F484C (동일 폼 팩터 및 풋프린트) — 차이점: Speed Grade, Device Type, Package, Core Supply Voltage, Process Technology.
LFE2-50E-5FN484C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LFE2-50E-5F484I
✅ 드롭인가격 문의
데이터시트 보기 →LFE2-50E-6F484C
✅ 드롭인가격 문의
데이터시트 보기 →LFE2-50E-6FN484C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LFE2-50SE-7FN484C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LFE2-50E-5F484C 최대 정격 & 전기적 특성
| Device Type | ECP2 Field-Programmable Gate Array (FPGA) |
| FPGA Family | LatticeECP2 |
| Logic Cells | 48,000 cells |
| Logic Array Blocks | 6,000 LABs |
| Embedded RAM | 396,288 bits |
| User I/O | 339 I/O |
| Core Supply Voltage | 1.2 V |
| 동작 공급 전압 | 1.14 V to 1.26 V |
| Speed Grade | 5 |
| Process Technology | 90 nm |
| 패키지 | 484-pin FBGA |
| Package Type | FBGA-484 |
| 실장 유형 | Surface mount |
| 동작 온도 범위 | 0 °C to 85 °C (TJ) |
| Programmable Resources | Programmable logic, embedded RAM, and DSP |
LFE2-50E-5F484C fbga-484 핀 구성 가이드
LFE2-50E-5F484C(fbga-484 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: LFE2-50E-5F484C.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
LFE2-50E-5F484C 적합 용도: 6 애플리케이션s: Industrial Control and Automation, Communications and Network Interface Equipment, Data Acquisition and Signal Processing, Video and Image Processing, Embedded Instrumentation and Test Equipment, Automotive and Vehicle Electronics.
Industrial Control and Automation
The LFE2-50E-5F484C is well suited to industrial controllers that coordinate sensors, actuators, safety logic, and communication links. Its 48,000 logic cells can implement multiple control engines and finite-state machines, while 396,288 RAM bits provide local buffers for counters, status histories, and sampled data. The 339 user I/O offer substantial connectivity for digital inputs, relay drivers, encoders, and field buses. A 0 °C to 85 °C junction-temperature specification covers many indoor industrial environments. In a controller design, assign I/O banks only after checking voltage compatibility, route high-current outputs away from sensitive logic, and validate the 1.2 V core rail under worst-case switching activity.
추천
Communications and Network Interface Equipment
The LFE2-50E-5F484C can implement protocol conversion, packet buffering, and control logic for communications equipment. The 48,000-cell ECP2 architecture provides parallel datapath capacity, while 396,288 RAM bits can hold packet descriptors, transmit queues, and receive buffers. Its 339 user I/O allow the FPGA to connect with external transceivers, network PHYs, status interfaces, and memories. The 1.2 V core and 1.14 V to 1.26 V operating range make supply planning straightforward relative to higher-voltage programmable devices. For signal-integrity-sensitive paths, use the complete implementation timing report to constrain clocks, registers, and high-speed interfaces before component placement and routing are finalized.
추천
Data Acquisition and Signal Processing
The LFE2-50E-5F484C supports parallel acquisition, filtering, trigger, and data-reduction systems by combining programmable logic with DSP capability. With 48,000 logic cells, it can host acquisition control, digital filtering, counters, and interface state machines in one device. The 396,288 RAM bits can be partitioned for sample buffering, correlation windows, or intermediate convolution data. Its 339 user I/O provide connections for parallel ADC and DAC buses, trigger inputs, clocks, and control signals. Because acquisition paths often require deterministic timing, engineers should constrain input registers to external clock boundaries and examine routing delays after placement. Decoupling and return-current paths must remain continuous around the large FBGA footprint.
추천
Video and Image Processing
The LFE2-50E-5F484C is suitable for embedded video engines that combine pixel pipelines, control logic, and external interface handling. Its 48,000 programmable cells can accommodate parallel color conversion, thresholding, motion detection, or overlay functions, while DSP blocks accelerate suitable arithmetic operations. The 396,288 RAM bits support line buffers and compact frame-processing storage. Up to 339 user I/O give designers access to image sensors, display interfaces, memory devices, and synchronization signals. Practical implementations should minimize logic between high-speed pixel inputs and destination registers, use registered clock boundaries where appropriate, and reserve pin positions early because the 484-pin FBGA leaves limited routing freedom for dense external buses.
추천
Embedded Instrumentation and Test Equipment
The LFE2-50E-5F484C fits embedded instrumentation that combines acquisition, sequencing, calibration, and display or communication control. The 48,000 logic cells can implement measurement pipelines and instrument state machines, while 396,288 RAM bits provide working storage for samples, calibration tables, and results. Its 339 user I/O accommodate sensor inputs, precision-converter interfaces, relay controls, displays, and communications. The 1.2 V core operating range simplifies internal rail planning, although every I/O bank still requires its own valid supply and signal-level review. Engineers should separate analog and digital return currents, keep clock distribution symmetrical, and verify timing under the intended tool version and configuration before authorizing the first production PCB spin.
추천
Automotive and Vehicle Electronics
The LFE2-50E-5F484C can support programmable vehicle electronics such as body controllers, sensor aggregators, gateway logic, and infotainment interfaces when the complete system requirements fall within the device's specified junction-temperature range of 0 °C to 85 °C. Its 48,000 logic cells support protocol handling, state machines, and redundant control paths, while 396,288 RAM bits assist with local data buffering. The 339 user I/O connect external sensors, transceivers, and actuator drivers. An automotive deployment requires additional qualification beyond the basic 0 °C to 85 °C junction specification, including environmental, reliability, traceability, and vehicle-program assessments. Pin assignment and power architecture should therefore be reviewed before the design enters layout.
추천
추천 제품 요약
엔지니어링 참조 데이터: LFE2-50E-5F484C — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | LFE2-50E-5FN484C | LFE2-50E-5F484I | LFE2-50E-6F484C | LFE2-50E-6FN484C | LFE2-50SE-7FN484C |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 484-pin FBGA | 484-BBGA | 484-BBGA | 484-BBGA | 484-BBGA | FPBGA-484 |
| FPGA Family | LatticeECP2 | LatticeECP2 | LatticeECP2 | LatticeECP2 | LatticeECP2 | LatticeECP2 |
| Logic Cells | 48,000 cells | 48,000 cells | 48,000 cells | 50,000 cells | 48,000 cells | 50,000 cells |
| Speed Designation | Speed grade 5 | Speed grade 5 | Speed grade 5 | 311 MHz | Speed grade 6 | 420 MHz |
주요 차별점
- Direct match to the 48,000-cell resource baseline (vs LFE2-50E-6F484C)
- Identical listed I/O and embedded-RAM capacity (vs LFE2-50E-5FN484C)
- Targeted 0 °C to 85 °C junction-temperature specification (vs LFE2-50E-5F484I)
- Original speed-grade-5 configuration (vs LFE2-50SE-7FN484C)
설계 노트
Plan the 484-pin FBGA escape routing before fixing the board stack-up. Assign the highest-fanout interfaces to locations with direct escape paths, maintain continuous ground references beneath the device, and route supply connections to meet the required current-return path. Because this package contains 339 user I/O in addition to power and configuration balls, a late interface assignment can create unroutable congestion even when the design fits logically within the 48,000 available cells.
Build the power tree around the specified 1.2 V core rail and the stated 1.14 V to 1.26 V operating range. Keep the core, I/O, and auxiliary supplies within their respective limits, and place local bypass capacitance at every supply ball according to the manufacturer layout guidance. Review the design for simultaneous I/O switching because 339 user I/O can increase simultaneous current demand and rail noise beyond a lightly loaded FPGA benchmark.
Use the manufacturer's ball map and pin-description table to assign configuration, clock, user I/O, power, and ground balls. Preserve symmetry for clocks and high-speed buses, avoid routing noisy inputs through the same escape channel as sensitive outputs, and provide low-inductance ground connections around the package. If a migration changes only the ordering suffix, compare the complete pin table and configuration behavior rather than assuming that every 484-ball ECP2 device is electrically identical.
Do not assume that a shared 484-pin FBGA footprint alone proves drop-in compatibility. The alternatives differ in ordering-code attributes, and some list 50,000 cells or different speed designations. Before releasing a replacement, verify the exact speed grade, temperature grade, memory resources, I/O standards, configuration method, tool support, and timing results. This prevents a nominal pin match from causing a firmware, timing, or production-qualification problem.
규정 준수 정보
The target is an FPGA rather than an AEC-Q100 automotive component. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer documentation for the exact ordering code.