Texas Instruments

LM239PW - Quad Open-Collector Comparator, 14-TSSOP | Texas Instruments

부품 번호: LM239PW ✓ 활성
2 V to 36 V Vdss 3.5 nA typical Id 14-pin TSSOP Package
MOQ: 1 |

LM239PW 개요

The Texas Instruments LM239PW is a commercial-grade quad differential comparator containing four independent voltage comparators in a 14-pin TSSOP package. It operates from a single supply or split supplies, supports input common-mode voltages that include ground, and provides open-collector outputs for wired connection to pull-up resistors. The device is specified for supply voltages up to 36 V and differential input voltages of ±38 V.

A voltage comparator is an analog integrated circuit that compares two input voltages and produces a logic-level indication of their relationship. The LM239 belongs to the comparator hierarchy, within analog interface and signal-conditioning semiconductors. Unlike a general-purpose operational amplifier used for closed-loop amplification, each comparator channel primarily switches its output according to the polarity of its differential input. Its open-collector architecture makes it useful for level translation, open-drain buses, and systems that require multiple devices to share a pull-up network.

The LM239PW provides four independent channels, a low typical input offset voltage of 0.37 mV, a typical input bias current of 3.5 nA, and a typical supply current of 200 µA per comparator. Its differential input range extends to ±38 V, while the common-mode input range includes ground. Open-collector outputs are compatible with TTL, MOS, and CMOS interfacing when suitable pull-up resistors are installed, and the low output saturation voltage supports reliable digital load drive.

Each channel operates independently, allowing the same package to perform four unrelated sensing or thresholding functions. The wide common-mode range is particularly useful in single-supply systems where one input remains near 0 V. The low offset and bias characteristics help establish thresholds with reduced input error, while the low typical supply current per channel supports low-power monitoring systems. Split-supply operation is also possible when the total supply span and input common-mode limits are respected.

Typical uses include industrial sensor interfaces, battery monitoring, overvoltage and undervoltage detection, window comparators, motor-control feedback, and general logic-level sensing. Because the outputs are open collector, pull-up resistors are required for normal high-level operation. A pull-up value should be selected from the required rise time, bus capacitance, sink-current limit, and downstream input characteristics rather than from the nominal supply voltage alone.

Designers should keep input leads short, place bypass capacitance close to the supply pins, and verify that every differential and common-mode input remains inside its rated range. Output collectors must not exceed their voltage and current limits, and unused comparator channels should be brought to defined legal states. This page combines application guidance, pin-level information, design checks, and verified same-footprint alternatives to support schematic capture and board-level replacement decisions.

드롭인 대체품: LM239PW — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: LM239PW (동일 폼 팩터 및 풋프린트) — 차이점: Input Bias Current, Input Offset Voltage, Logic Compatibility, Package, Supply Current.

Texas Instruments
Input Bias Current: 3.5 nA maximum
Input Offset Voltage: 0.37 mV maximum
Logic Compatibility: TTL, MOS, and CMOS compatible
비교 대상: LM239PW →

LM239PWG4

✅ 드롭인
📦 14-pin TSSOP
Same 14-pin TSSOP footprint and LM239 comparator family; documented electrical rating difference is 0%, subject to suffix-specific temperature qualification.

📋 참조 대체품 (카탈로그에 없음)

LM239PWE4

✅ 드롭인
📦 14-pin TSSOP
Same 14-pin TSSOP footprint and LM239 comparator family; documented electrical rating difference is 0%, subject to suffix-specific temperature qualification.

📋 참조 대체품 (카탈로그에 없음)

LM239PW 최대 정격 & 전기적 특성

Comparator Type Quad differential comparator
Number of Channels 4 channels
Supply Voltage Range 2 V to 36 V
Maximum Supply Voltage 36 V
Differential Input Voltage Range -38 V to +38 V
Common-Mode Input Range Includes ground
Input Offset Voltage 0.37 mV typical
Input Bias Current 3.5 nA typical
공급 전류 200 µA typical per comparator
출력 유형 Open-collector
Logic Compatibility Compatible with TTL, MOS, and CMOS
패키지 14-pin TSSOP
실장 유형 Surface mount
Grade Commercial
ESD Rating 2 kV HBM
RoHS 상태 Compliant
REACH Status Compliant

LM239PW 핀 구성

TSSOP-14 (4.4mm) Package Pinout Diagram TSSOP-14 4.4x5mm, P0.65mm, JEDEC MO-153. 14-pin thin shrink. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 TSSOP-14 (4.4mm)
핀 1 OUT1 — Comparator 1 open-collector output
핀 2 IN1- — Comparator 1 inverting input
핀 3 IN1+ — Comparator 1 non-inverting input
핀 4 GND — Ground
핀 5 IN2+ — Comparator 2 non-inverting input
핀 6 IN2- — Comparator 2 inverting input
핀 7 OUT2 — Comparator 2 open-collector output
핀 8 OUT3 — Comparator 3 open-collector output
핀 9 IN3- — Comparator 3 inverting input
핀 10 IN3+ — Comparator 3 non-inverting input
핀 11 GND — Ground
핀 12 IN4+ — Comparator 4 non-inverting input
핀 13 IN4- — Comparator 4 inverting input
핀 14 OUT4 — Comparator 4 open-collector output

일반적인 애플리케이션

LM239PW 적합 용도: 6 애플리케이션s: Industrial Sensor Threshold Detection, Battery Voltage Monitoring, Power-Supply Rail Supervision, Motor and Actuator Feedback, Window Comparator and Control Systems, Automotive and Mobile Equipment Interlocks.

🏭

Industrial Sensor Threshold Detection

The LM239PW fits industrial sensor interfaces that need to compare a conditioned analog signal against a reference. Its four independent channels can monitor temperature, pressure, level, or proximity signals without requiring four separate packages, while the common-mode input range including ground supports sensors operating near 0 V. The 0.37 mV typical input offset and 3.5 nA typical input bias current reduce input-referred threshold errors when compared with a low-impedance reference. Each channel's open-collector output can drive a PLC input, relay-driver stage, or digital isolator through a suitable pull-up resistor. In industrial systems, select resistor values and protection components so switching transients and sensor faults cannot exceed the comparator's absolute-maximum ratings.

⚡

Battery Voltage Monitoring

The LM239PW can implement threshold detection for multi-cell batteries, charger systems, and portable equipment. Its differential input capability of ±38 V provides useful headroom for divided battery voltages, while the common-mode range includes ground supports low-cell monitoring near the bottom of the discharge curve. Four channels can supervise different voltage bands or provide redundant comparisons. Open-collector outputs allow warning and shutdown signals to share wired buses when appropriate pull-up resistors are fitted. In a real battery design, use precision resistors, verify resistor power dissipation during worst-case charging, and add transient protection for hot-plug, load dump, and inductive events rather than assuming the ±38 V differential limit covers unprotected surges.

🔋

Power-Supply Rail Supervision

The LM239PW is appropriate for detecting overvoltage, undervoltage, and window conditions in distributed power systems. The 2 V to 36 V operating range supports both low-voltage digital rails and higher industrial supply buses, while four channels permit independent supervision tasks. The ground-inclusive common-mode range is useful when monitoring a rail relative to its return. Open-collector outputs can trigger a system fault line, inhibit a regulator, or drive an isolation stage through pull-up resistors. For dependable supervision, verify the actual output saturation at the selected sink current, allow adequate pull-up rise time for the receiving circuit, and design divider ratios so normal tolerance, ripple, and transient excursions remain within the comparator's input limits.

🤖

Motor and Actuator Feedback

The LM239PW can compare motor-position, current-sense, or actuator feedback signals against limit thresholds in industrial and embedded motion systems. Four independent channels make it practical to monitor positive and negative limits, fault flags, or redundant sensor conditions in a compact 14-pin TSSOP. The low typical supply current of 200 µA per comparator reduces the penalty when the monitoring circuit remains active. Its open-collector outputs can pull up alarm, shutdown, or direction-control signals without tying the device directly to a high-current motor driver. Keep sensing traces away from motor-switching nodes, use filtering where sensor ripple could cause chatter, and account for comparator response time when setting debounce or filtering around fast feedback events.

📺

Window Comparator and Control Systems

The LM239PW can implement window comparison by using two channels to detect lower and upper limits around a reference. This arrangement is useful in signal-range validation, automatic-range measurement, supply sequencing, and equipment protection. Its differential input range of ±38 V and common-mode range including ground allow the comparator to work with low-level control signals while remaining tolerant of larger differential excursions within the stated ratings. Open-collector outputs make it straightforward to combine an upper-limit and lower-limit indication into a common wired fault bus. Define hysteresis externally so noise around a threshold does not cause repeated output transitions, and verify that resistor tolerances do not unintentionally narrow the intended detection window.

🚗

Automotive and Mobile Equipment Interlocks

The LM239PW can support interlock and presence-detection functions in mobile equipment and automotive-style control modules where the PCB area is constrained. Four channels in a 14-pin TSSOP provide multiple comparisons in one package, and the 36 V maximum supply rating is useful for systems with protected higher-voltage rails. The open-collector output can signal an interlock controller or drive an external relay driver when the required sink current and isolation are respected. Vehicle environments also require careful transient suppression, grounding, and temperature verification. Use the exact suffix-specific grade for the final product environment, include input clamps where conducted disturbances are possible, and avoid relying on a comparison result before the protection network has settled.

What is the operating voltage of LM239PW?
The LM239PW operates from 2 V to 36 V as a single supply and can also use split supplies with a total span from 2 V to 36 V. According to the Texas Instruments LM239 product page, the common-mode input range includes ground and the differential input range extends to ±38 V. The device therefore suits low-voltage logic systems as well as higher-voltage industrial monitoring circuits, provided input and output limits are respected.
What are the key specifications of LM239PW that engineers should know?
The LM239PW integrates four independent open-collector differential comparators in a 14-pin TSSOP package. Its key specifications include a 2 V to 36 V operating supply range, a differential input range of ±38 V, 0.37 mV typical input offset voltage, 3.5 nA typical input bias current, and 200 µA typical supply current per comparator. Texas Instruments also specifies compatibility with TTL, MOS, and CMOS logic interfaces.
Where can I download the LM239PW datasheet PDF?
The official LM239 documentation is available through the Texas Instruments product page at https://www.ti.com/product/LM239, where the manufacturer provides the LM239 data sheet and ordering information. The LM239PW ordering entry is also available at https://www.ti.com/product/LM239/part-details/LM239PW. Use the manufacturer PDF for the authoritative pin configuration, absolute-maximum ratings, electrical characteristics, and recommended operating conditions.
Where can I find the LM239PW pinout?
The LM239PW uses a 14-pin TSSOP with four complete comparator channels. Pins 1 and 7 are outputs for channels 1 and 4, pins 8 and 14 are outputs for channels 3 and 2, and pins 4 and 11 are ground. The remaining pairs are the inverting and non-inverting inputs for each channel. Always assign PCB nets using the pin-description table in the Texas Instruments LM239 datasheet.
Does the LM239PW need pull-up resistors?
Yes, the LM239PW outputs are open collector and require pull-up resistors to establish a high output state. The resistor can connect to the supply used by the receiving TTL, MOS, or CMOS logic, provided voltage and current limits remain acceptable. Select the resistance using the required rise time, bus capacitance, and maximum collector sink current; the datasheet's output-saturated characteristics should also be checked against the load.
Can LM239PW compare signals near ground?
Yes, the LM239PW common-mode input range includes ground, which makes it suitable for single-supply sensing of signals near 0 V. Its specified differential input range is ±38 V. The usable common-mode interval must still be checked for the selected supply voltage and temperature, especially when an input is driven close to a supply rail or when a protection network injects current.
Is LM239PW suitable for industrial sensor monitoring?
The LM239PW is well suited to industrial sensor monitoring when the sensed signals remain within its input ratings. Its 2 V to 36 V supply range supports common embedded supply levels, while the common-mode range includes ground for low-voltage sensor outputs. The 0.37 mV typical offset and 3.5 nA typical bias current help reduce threshold error, although actual accuracy also depends on resistor tolerance, input noise, and the sensor source impedance.
What is the best drop-in replacement for LM239PW?
The closest documented same-footprint replacements are LM239PWG4 and LM239PWE4, both identified by the manufacturer with the same 14-pin TSSOP format as LM239PW. Their electrical values must be checked against the required temperature grade and operating conditions before substitution. The manufacturer states that its B-version family is a drop-in replacement for LM239, LM339, and LM2901 designs.
What can replace LM239PW without changing the PCB?
LM239PWG4 and LM239PWE4 are the documented same-package alternatives for LM239PW and can be evaluated as PCB-compatible replacements. The LM239PW itself is also supported by the LM239B family, whose manufacturer description identifies it as a drop-in replacement for LM239, LM339, and LM2901 devices. Confirm the exact ordering suffix, temperature range, pinout, and electrical limits against the target design before approving a substitution.
What is the difference between LM239PW and LM239PWR?
LM239PW and LM239PWR identify the same Texas Instruments LM239 device in a 14-pin TSSOP package, while their ordering suffixes distinguish the packing configuration. The documented listing for LM239PWR identifies it as a 14-TSSOP open-collector quad comparator, matching the functional description of LM239PW. Because packing or reel-code differences do not add electrical engineering value, LM239PWR is not listed as a separate drop-in alternative.
Is LM239PW the same as an LM239B drop-in part?
Yes, the Texas Instruments LM239 family documentation identifies the B-version as a drop-in replacement for LM239, LM339, and LM2901, and the LM239PW belongs to that quad-comparator family. Exact interchangeability still depends on the specific B-version ordering suffix, supply configuration, pinout, and operating-temperature requirements. Compare those fields before changing the manufacturer marking on an existing design.
When should I choose LM239PW over LM239PWG4 or LM239PWE4?
Choose LM239PW when its documented commercial-grade ordering option satisfies the product's temperature range and environmental requirements. Consider LM239PWG4 or LM239PWE4 only after comparing their exact temperature grades and qualification attributes against the application. All three use the same 14-pin TSSOP format, so the selection should be driven by operating conditions rather than PCB conversion.
Is LM239PW suitable for battery and power-supply monitoring?
The LM239PW is suitable for battery and power-supply monitoring when the monitored differential and common-mode voltages stay within the device ratings. Its common-mode range includes ground, which helps with low-voltage cells, and its differential range of ±38 V covers many monitored supply differences. Use resistor-divider attenuation where necessary and protect inputs against transients exceeding the absolute-maximum limits.
Where to buy LM239PW online?
Use the Request a Quote form on this page to request current LM239PW pricing, stock, lead time, and order quantities. The quote workflow avoids presenting a stale or inconsistent commercial figure and allows the exact 14-pin TSSOP ordering code to be confirmed. Specify reel, tube, or other required packing details with the request because the order suffix can affect handling requirements.
What is the lead time for LM239PW?
The current LM239PW lead time should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, manufacturing status, and packing format, so it should be confirmed for the exact 14-pin TSSOP part rather than assumed from another LM239 ordering suffix. Include the required quantity and delivery target in the request for a more useful quotation.
Is LM239PW in stock and what does it cost?
Current LM239PW stock and commercial terms should be confirmed through the Request a Quote form on this page. The form accepts the exact quantity, packaging preference, and delivery requirements needed to check supply. This avoids presenting a static figure that may not match the requested configuration or an order placed for a different LM239 suffix.

엔지니어링 참조 데이터: LM239PW — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose LM239PW for compact, low-power threshold detection when four open-collector channels are required, the design operates from 2 V to 36 V, and the common-mode input range including ground is important. It is a strong fit for single-supply sensor interfaces, battery supervision, power-good detection, and window comparators where wired logic faults or multiple pull-up nodes are useful. LM239PWG4 and LM239PWE4 preserve the 14-pin TSSOP footprint and are the relevant same-family options when their specific suffix qualifications better match the product environment. Treat them as candidates rather than automatic substitutions because the exact temperature and qualification requirements must be checked. Do not select this device when a push-pull output is required, when a rail-to-rail input specification is essential, or when the input can exceed the ±38 V differential limit without external protection.

대체품과의 비교

파라미터 이 제품 LM239PWG4 LM239PWE4
Package 14-pin TSSOP 14-pin TSSOP 14-pin TSSOP
Brand Texas Instruments Texas Instruments Texas Instruments
Comparator Type Quad differential comparator Quad differential comparator Quad differential comparator
Number of Channels 4 channels 4 channels 4 channels

주요 차별점

  • Four independent channels in one compact package (vs LM239PWG4)
  • Ground-inclusive common-mode input range (vs LM239PWE4)
  • Low input error for threshold detection (vs LM239PWG4)

설계 노트

Do not operate the open-collector outputs without pull-up resistors. The transistor can pull the output low but cannot actively drive it high. Select the pull-up voltage to match the receiving logic, confirm the maximum collector sink current at the required logic-low current, and use a resistance large enough to limit sink current while small enough to achieve the required bus rise time.

The typical supply current is 200 µA per comparator, but total current and dissipation rise with four active channels and output loading. Place the supply bypass capacitor close to the supply and ground pins, minimize trace resistance, and avoid routing output-transition currents through sensitive input-reference paths. Check the total supply current across the operating temperature range when the device remains continuously enabled.

Keep the four comparator input nets away from switching nodes, relay contacts, high-current outputs, and the open-collector traces that carry fast collector transitions. Connect the two ground pins to a low-impedance ground plane according to the datasheet layout guidance. For sensitive threshold measurements, use short traces, a stable reference source, and input filtering that preserves the required response time.

The differential input limit of ±38 V is not a general-purpose surge withstand rating. Do not connect the inputs directly to unclamped motor, battery, or mains-derived signals. Use resistive attenuation and suitable clamp protection, and verify that the complete input network preserves accuracy at the threshold while keeping the comparator pins within their absolute-maximum limits under normal and fault conditions.

규정 준수 정보

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

RoHS and REACH compliance are identified in the LM239 ordering information. Automotive qualification, lead-free status, halogen-free status, and conflict-minerals status are not established for this specific ordering suffix.

관련 검색

LM239PW datasheet LM239PW pinout LM239PW datasheet pdf LM239PW equivalent LM239PW replacement LM239PW cross reference LM239PW vs LM239PWG4 LM239PW 14-TSSOP footprint Texas Instruments LM239PW LM239PW open collector comparator LM239PW supply voltage LM239PW sensor interface LM239PW price LM239PW stock

관련 부품 & 용어

Texas Instruments LM239PW LM239PWG4 LM239PWE4 LM239 LM239B LM339 LM2901 quad differential comparator comparator logic IC analog comparator open-collector output open-drain output differential input voltage common-mode input voltage input offset voltage input bias current supply current 14-pin TSSOP TSSOP package family surface-mount package TTL MOS logic CMOS logic single-supply operation split-supply operation battery monitoring industrial sensor interface power-supply supervision RoHS REACH
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기