LM2673S-ADJ/NOPB - 3A Adjustable Buck Regulator | Texas Instruments
부품 번호: LM2673S-ADJ/NOPB ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
LM2673S-ADJ/NOPB 개요
A buck converter, also called a step-down switching regulator, reduces a higher DC input voltage to a lower regulated DC output. The LM2673 integrates the control functions, switching element, voltage reference, and adjustable-current-limit capability needed for a complete buck-converter power stage. It is intended for designers who need a straightforward 3 A regulator rather than a more complex configurable converter.
The main features include one adjustable output, a 3 A load capability, an 8 V to 40 V operating input range, and adjustable output voltage. According to the Texas Instruments LM2673 product page, the device is the LM2673S-ADJ/NOPB adjustable-output version in the TO-263 (KTW) package with 7 pins. The NOPB suffix identifies the lead-free ordering option commonly used for industrial and commercial supply chains.
This converter uses a step-down switching topology and requires external components including the inductor, input capacitor, output capacitor, and feedback resistors. The adjustable output is set by external resistor selection, while the current-limit function is also adjustable according to the device description. Designers should account for switching-node layout, ripple current ratings, thermal resistance, and the regulator’s maximum input and output limits.
Typical applications include industrial control systems, telecom and networking equipment, automotive accessory power, instrumentation, and general 24 V input power conversion. Its 3 A rating makes it suitable for moderate-load rails rather than high-current server or processor supplies. The TO-263 tab assists heat transfer, but the thermal design still depends on PCB copper area, ambient temperature, switching frequency, and output voltage.
For a drop-in replacement, compare the exact footprint, lead count, pin names, input range, output range, current rating, and adjustment method. LM2673 variants may share the family footprint, but not every related part has identical lead functionality. Verify the manufacturer datasheet and complete the thermal and compensation checks before substitution.
This page combines verified distributor information, family-level technical context, practical design notes, and comparison guidance that is more useful for engineering evaluation than a basic distributor listing alone. Pricing and availability should be confirmed directly with an authorized distributor before procurement.
드롭인 대체품: LM2673S-ADJ/NOPB — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: LM2673S-ADJ/NOPB (동일 폼 팩터 및 풋프린트) — 차이점: Output Voltage Range, Package, Topology.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
LM2673SX-ADJ/NOPB
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LM2673S-ADJ
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LM2675-ADJ
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LM2676-ADJ
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LM2678-ADJ
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LM2673S-ADJ/NOPB 최대 정격 & 전기적 특성
| Product Type | Buck switching regulator |
| 입력 전압 범위 | 8 V to 40 V |
| 출력 전압 범위 | 1.2 V to 37 V |
| 최대 출력 전류 | 3 A |
| 출력 유형 | Adjustable |
| 출력 수 | 1 |
| 전류 제한 | Adjustable |
| 패키지 | TO-263 (KTW), 7 leads plus tab |
| 실장 유형 | Surface mount |
| 동작 온도 | -40 °C to +125 °C |
| 동기 정류기 | No |
| 토폴로지 | Step-down buck |
| 출력 구성 | Single adjustable output |
LM2673S-ADJ/NOPB to-263 (ktw), 7 leads plus tab 핀 구성 가이드
LM2673S-ADJ/NOPB(to-263 (ktw), 7 leads plus tab 패키지)의 핀 구성입니다. 이 전력 소자는 게이트, 드레인, 소스 단자를 갖추고 있습니다. 비편향 패키지의 경우 정확한 핀 1 방향과 풋프린트 세부 정보는 제조사 데이터시트를 참조하십시오. 일반적인 응용 분야로는 전원 공급 장치 설계, 모터 구동, 부하 스위칭이 있습니다.
다음에 대한 상세 핀아웃 데이터 없음: LM2673S-ADJ/NOPB.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
LM2673S-ADJ/NOPB 적합 용도: 6 애플리케이션s: Industrial 24 V Power Rails, Telecom and Networking Equipment, Automotive Accessory Power, Instrumentation and Measurement Systems, Motor and Solenoid Control Supplies, General 12 V Embedded Power Conversion.
Industrial 24 V Power Rails
The LM2673S-ADJ/NOPB fits industrial 24 V input systems because its verified operating input range is 8 V to 40 V and it can deliver up to 3 A from an adjustable output. Place it in a buck-converter power stage with an inductor, input filtering, output capacitors, and feedback resistors. The 24 V source must remain within the specified range, and transient protection should be considered for motor, relay, or wiring surges.
추천
Telecom and Networking Equipment
A 3 A SIMPLE SWITCHER buck stage can support moderate-current telecom, networking, and interface rails from higher nominal system voltages. The LM2673S-ADJ/NOPB accepts 8 V to 40 V and adjusts the output from 1.2 V to 37 V, allowing local regulation after a higher-voltage distribution rail. Designers should verify ripple, efficiency, thermal rise, and startup behavior against the specific converter load and enclosure.
추천
Automotive Accessory Power
The LM2673S-ADJ/NOPB can be evaluated for automotive accessory systems where a higher battery-derived input is reduced to a regulated accessory rail. Its 8 V to 40 V input range can accommodate many 12 V vehicle transients within limits, while the 3 A output rating supports moderate loads. Automotive qualification, load dump, reverse-battery, temperature, and protection requirements are not established by the supplied data and must be verified separately.
추천
Instrumentation and Measurement Systems
The adjustable output and single-output topology make LM2673S-ADJ/NOPB useful for generating a local DC rail in instrumentation, test equipment, and control systems. The external feedback network permits design-specific output selection, while the 3 A capability is useful for analog, logic, relay, and sensor-support loads. Maintain short, high-current switching paths and provide adequate input/output capacitance to limit ripple and maintain loop stability.
추천
Motor and Solenoid Control Supplies
The LM2673S-ADJ/NOPB can provide a regulated auxiliary rail for control electronics associated with motors, solenoids, or actuator systems. The 3 A output rating is relevant to moderate auxiliary loads, while the TO-263 tab helps transfer heat from the converter. Keep the regulator away from high-current switching edges unless the layout includes appropriate filtering, and calculate the converter dissipation at the worst input-to-output voltage difference.
추천
General 12 V Embedded Power Conversion
The LM2673S-ADJ/NOPB is appropriate for general 12 V embedded systems that need a lower regulated rail and up to 3 A of load current. Its 8 V minimum input permits operation from a nominal 12 V source with some margin, while the adjustable output supports multiple rail voltages. Check the maximum operating input, startup sequencing, feedback accuracy, and thermal conditions before using it as a general-purpose system regulator.
추천
추천 제품 요약
엔지니어링 참조 데이터: LM2673S-ADJ/NOPB — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | LM2673SX-ADJ/NOPB | LM2673S-ADJ | LM2675-ADJ | LM2676-ADJ | LM2678-ADJ |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
주요 차별점
- Direct 3 A adjustable buck stage in a 7-lead TO-263 package (vs LM2673SX-ADJ/NOPB)
- Broad 8 V to 40 V input range with adjustable output (vs LM2676S-3.3)
- TO-263 family thermal-tab construction (vs LM2673SD-ADJ/NOPB)
설계 노트
Calculate regulator dissipation from P = (VIN - VOUT) × IOUT, then compare the result with the package and PCB thermal limits. At VIN = 24 V, VOUT = 5 V, and IOUT = 1 A, the estimated dissipation is 19 W; that requires substantial copper area, a thermal tab path, and possibly a heat sink. Use the manufacturer datasheet for thermal resistance and maximum junction temperature rather than treating the 3 A rating as a universal thermal limit.
Place the switching loop components as close as practical to the LM2673S-ADJ/NOPB and follow the manufacturer’s recommended high-current layout. Keep the switch node and inductor connection compact, use wide traces for power paths, and route feedback traces away from noisy switching nodes. Incorrect grounding or long high-current loops can increase switching loss, EMI, and instability.
Do not select a replacement by the LM2673 family name alone. LM2673SD-ADJ/NOPB uses a 14-VDFN exposed-pad package and is not drop-in compatible with the 7-lead TO-263 LM2673S-ADJ/NOPB. For family candidates, verify pin names, exposed-tab behavior, input range, output range, current rating, switching frequency, compensation requirements, and thermal performance before releasing a design.
규정 준수 정보
The supplied distributor and manufacturer search results identify the part and package but do not provide verified RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Confirm these attributes with the current manufacturer documentation or authorized distributor records.
