LM2673S-ADJ/NOPB - 3A Adjustable Buck Regulator | Texas Instruments
料号： LM2673S-ADJ/NOPB ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
LM2673S-ADJ/NOPB 概述
A buck converter, also called a step-down switching regulator, reduces a higher DC input voltage to a lower regulated DC output. The LM2673 integrates the control functions, switching element, voltage reference, and adjustable-current-limit capability needed for a complete buck-converter power stage. It is intended for designers who need a straightforward 3 A regulator rather than a more complex configurable converter.
The main features include one adjustable output, a 3 A load capability, an 8 V to 40 V operating input range, and adjustable output voltage. According to the Texas Instruments LM2673 product page, the device is the LM2673S-ADJ/NOPB adjustable-output version in the TO-263 (KTW) package with 7 pins. The NOPB suffix identifies the lead-free ordering option commonly used for industrial and commercial supply chains.
This converter uses a step-down switching topology and requires external components including the inductor, input capacitor, output capacitor, and feedback resistors. The adjustable output is set by external resistor selection, while the current-limit function is also adjustable according to the device description. Designers should account for switching-node layout, ripple current ratings, thermal resistance, and the regulator’s maximum input and output limits.
Typical applications include industrial control systems, telecom and networking equipment, automotive accessory power, instrumentation, and general 24 V input power conversion. Its 3 A rating makes it suitable for moderate-load rails rather than high-current server or processor supplies. The TO-263 tab assists heat transfer, but the thermal design still depends on PCB copper area, ambient temperature, switching frequency, and output voltage.
For a drop-in replacement, compare the exact footprint, lead count, pin names, input range, output range, current rating, and adjustment method. LM2673 variants may share the family footprint, but not every related part has identical lead functionality. Verify the manufacturer datasheet and complete the thermal and compensation checks before substitution.
This page combines verified distributor information, family-level technical context, practical design notes, and comparison guidance that is more useful for engineering evaluation than a basic distributor listing alone. Pricing and availability should be confirmed directly with an authorized distributor before procurement.
直接替换替代料： LM2673S-ADJ/NOPB ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： LM2673S-ADJ/NOPB （相同外形与封装尺寸） ——差异在于 Output Voltage Range, Package, Topology.
快速对比工具——选择替代料号进行并排对比：
LM2673SX-ADJ/NOPB
✅ 直接替换📋 参考替代料（不在目录中）
LM2673S-ADJ
✅ 直接替换📋 参考替代料（不在目录中）
LM2675-ADJ
✅ 直接替换📋 参考替代料（不在目录中）
LM2676-ADJ
✅ 直接替换📋 参考替代料（不在目录中）
LM2678-ADJ
✅ 直接替换📋 参考替代料（不在目录中）
LM2673S-ADJ/NOPB 最大额定值与电气特性
| Product Type | Buck switching regulator |
| 输入电压范围 | 8 V to 40 V |
| 输出电压范围 | 1.2 V to 37 V |
| 最大输出电流 | 3 A |
| 输出类型 | Adjustable |
| 输出数量 | 1 |
| 限流 | Adjustable |
| 封装 | TO-263 (KTW), 7 leads plus tab |
| 安装类型 | Surface mount |
| 工作温度 | -40 °C to +125 °C |
| 同步整流器 | No |
| 拓扑 | Step-down buck |
| 输出配置 | Single adjustable output |
LM2673S-ADJ/NOPB to-263 (ktw), 7 leads plus tab 引脚配置指南
LM2673S-ADJ/NOPB（to-263 (ktw), 7 leads plus tab 封装）的引脚配置。 该功率器件具有栅极、漏极和源极端子。对于无极性封装，请参阅制造商数据手册以了解确切的引脚 1 方向和封装尺寸细节。常见应用包括电源设计、电机驱动和负载开关。
暂无详细引脚数据： LM2673S-ADJ/NOPB.
请参阅 数据手册 以查看完整引脚配置。
典型应用
LM2673S-ADJ/NOPB 适用于 6 应用s: Industrial 24 V Power Rails, Telecom and Networking Equipment, Automotive Accessory Power, Instrumentation and Measurement Systems, Motor and Solenoid Control Supplies, General 12 V Embedded Power Conversion.
Industrial 24 V Power Rails
The LM2673S-ADJ/NOPB fits industrial 24 V input systems because its verified operating input range is 8 V to 40 V and it can deliver up to 3 A from an adjustable output. Place it in a buck-converter power stage with an inductor, input filtering, output capacitors, and feedback resistors. The 24 V source must remain within the specified range, and transient protection should be considered for motor, relay, or wiring surges.
推荐
Telecom and Networking Equipment
A 3 A SIMPLE SWITCHER buck stage can support moderate-current telecom, networking, and interface rails from higher nominal system voltages. The LM2673S-ADJ/NOPB accepts 8 V to 40 V and adjusts the output from 1.2 V to 37 V, allowing local regulation after a higher-voltage distribution rail. Designers should verify ripple, efficiency, thermal rise, and startup behavior against the specific converter load and enclosure.
推荐
Automotive Accessory Power
The LM2673S-ADJ/NOPB can be evaluated for automotive accessory systems where a higher battery-derived input is reduced to a regulated accessory rail. Its 8 V to 40 V input range can accommodate many 12 V vehicle transients within limits, while the 3 A output rating supports moderate loads. Automotive qualification, load dump, reverse-battery, temperature, and protection requirements are not established by the supplied data and must be verified separately.
推荐
Instrumentation and Measurement Systems
The adjustable output and single-output topology make LM2673S-ADJ/NOPB useful for generating a local DC rail in instrumentation, test equipment, and control systems. The external feedback network permits design-specific output selection, while the 3 A capability is useful for analog, logic, relay, and sensor-support loads. Maintain short, high-current switching paths and provide adequate input/output capacitance to limit ripple and maintain loop stability.
推荐
Motor and Solenoid Control Supplies
The LM2673S-ADJ/NOPB can provide a regulated auxiliary rail for control electronics associated with motors, solenoids, or actuator systems. The 3 A output rating is relevant to moderate auxiliary loads, while the TO-263 tab helps transfer heat from the converter. Keep the regulator away from high-current switching edges unless the layout includes appropriate filtering, and calculate the converter dissipation at the worst input-to-output voltage difference.
推荐
General 12 V Embedded Power Conversion
The LM2673S-ADJ/NOPB is appropriate for general 12 V embedded systems that need a lower regulated rail and up to 3 A of load current. Its 8 V minimum input permits operation from a nominal 12 V source with some margin, while the adjustable output supports multiple rail voltages. Check the maximum operating input, startup sequencing, feedback accuracy, and thermal conditions before using it as a general-purpose system regulator.
推荐
推荐产品汇总
工程参考数据： LM2673S-ADJ/NOPB ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | LM2673SX-ADJ/NOPB | LM2673S-ADJ | LM2675-ADJ | LM2676-ADJ | LM2678-ADJ |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
关键差异点
- Direct 3 A adjustable buck stage in a 7-lead TO-263 package （对比 LM2673SX-ADJ/NOPB)
- Broad 8 V to 40 V input range with adjustable output （对比 LM2676S-3.3)
- TO-263 family thermal-tab construction （对比 LM2673SD-ADJ/NOPB)
设计说明
Calculate regulator dissipation from P = (VIN - VOUT) × IOUT, then compare the result with the package and PCB thermal limits. At VIN = 24 V, VOUT = 5 V, and IOUT = 1 A, the estimated dissipation is 19 W; that requires substantial copper area, a thermal tab path, and possibly a heat sink. Use the manufacturer datasheet for thermal resistance and maximum junction temperature rather than treating the 3 A rating as a universal thermal limit.
Place the switching loop components as close as practical to the LM2673S-ADJ/NOPB and follow the manufacturer’s recommended high-current layout. Keep the switch node and inductor connection compact, use wide traces for power paths, and route feedback traces away from noisy switching nodes. Incorrect grounding or long high-current loops can increase switching loss, EMI, and instability.
Do not select a replacement by the LM2673 family name alone. LM2673SD-ADJ/NOPB uses a 14-VDFN exposed-pad package and is not drop-in compatible with the 7-lead TO-263 LM2673S-ADJ/NOPB. For family candidates, verify pin names, exposed-tab behavior, input range, output range, current rating, switching frequency, compensation requirements, and thermal performance before releasing a design.
合规信息
The supplied distributor and manufacturer search results identify the part and package but do not provide verified RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Confirm these attributes with the current manufacturer documentation or authorized distributor records.
