Texas Instruments

LM2876TF - 40W Mono Class AB Amplifier | Texas Instruments

부품 번호: LM2876TF ✓ 활성
20 V to 60 V Vdss TO-220-11 isolated package Package 20 Hz to 20 kHz Speed
MOQ: 1 |

LM2876TF 개요

Texas Instruments LM2876TF is a high-performance 40 W mono Class AB audio power amplifier with mute, specified to deliver continuous average output power into an 8 ohm load from a 20 V to 60 V supply. The device is packaged in an 11-pin TO-220 isolated package. Its stated audio performance includes 0.1% total harmonic distortion plus noise from 20 Hz to 20 kHz under the manufacturer’s stated test conditions.

An audio power amplifier is an integrated circuit that increases the voltage and current capability of an audio signal so it can drive a loudspeaker, subwoofer, or other high-impedance acoustic load. The LM2876 belongs to the amplifier IC hierarchy, where Class AB describes the output-stage operating method: the amplifier conducts during both halves of the audio waveform while minimizing crossover distortion. It also provides SPiKe protection, described by Texas Instruments as dynamically protecting the device against instantaneous thermal peaks.

The principal specifications are 40 W continuous average output power, operation from 20 V to 60 V, and compatibility with an 8 ohm load. The LM2876 is a mono design intended for single-channel audio amplification. Its 0.1% THD+N rating covers 20 Hz to 20 kHz, providing a defined distortion and bandwidth reference when comparing it with other high-power audio amplifiers.

Internally, the LM2876 combines Class AB output operation with a mute function and SPiKe thermal protection. The protection system is intended to react to instantaneous power events more effectively than a basic thermal shutdown alone. The isolated TO-220-11 construction supports conventional through-hole assembly and provides a mechanically robust option for audio equipment where heatsinking and grounding layout are important.

Typical uses include monoblock subwoofer amplifiers, powered speaker systems, hi-fi amplifier output stages, home-theater audio power amplifiers, and industrial audio drivers. In each case, the amplifier requires a stable high-voltage supply, appropriate output filtering for the selected load, adequate copper area and thermal management, and careful separation of input, output, and power-ground paths.

Design should begin with the 40 W continuous-power target rather than the absolute device rating. A practical implementation must provide enough supply headroom, verify thermal conditions at the selected load impedance, and account for the difference between continuous music power and short-duration peaks. The mute and SPiKe features add control and protection functions, but successful operation still depends on correct board layout and thermal design.

This page combines the manufacturer’s core LM2876 specifications with purchasing guidance, application-focused engineering guidance, and a packaging-aware replacement assessment. It is intended to help designers determine whether the LM2876TF suits a high-power mono audio stage and how to verify board-level thermal, electrical, and sourcing requirements before committing to a design.

드롭인 대체품: LM2876TF — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: LM2876TF (동일 폼 팩터 및 풋프린트) — 차이점: Load Impedance, Number of Pins, Supply Voltage Range.

Texas Instruments
Load Impedance: 4 Ω to 8 Ω
Number of Pins: 11
Supply Voltage Range: 20 V to 94 V (single), ±10 V to ±47 V (split)
비교 대상: LM2876TF →

LM2876TF/NOPB

✅ 드롭인
📦 TO-220-11
Same 40 W output rating, 20 V to 60 V supply range, Class AB topology, and TO-220-11 package; 0% stated electrical-rating difference, with NOPB as the ordering suffix.

📋 참조 대체품 (카탈로그에 없음)

LM2876TF 최대 정격 & 전기적 특성

Product Type Mono audio power amplifier IC
Manufacturer Texas Instruments
Amplifier Class Class AB
Number of Channels 1 channel
Continuous Average Output Power 40 W
Load Impedance 8 ohm
Supply Voltage Range 20 V to 60 V
Total Harmonic Distortion Plus Noise 0.1% at 40 W into 8 ohm from 20 Hz to 20 kHz
Frequency Range 20 Hz to 20 kHz
Mute Function Yes
Protection Technology SPiKe Self Peak Instantaneous Temperature protection
Package Type TO-220-11 isolated package
핀 수 11 pins
실장 유형 Through-hole

LM2876TF to-220-11 isolated package 핀 구성 가이드

LM2876TF(to-220-11 isolated package 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

LM2876TF의 to-220-11 isolated package 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: LM2876TF.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

LM2876TF 적합 용도: 6 애플리케이션s: Monoblock Subwoofer Amplifier, Powered Speaker Output Stage, Home Theater Amplifier, Hi-Fi Stereo Amplifier, Industrial Audio Driver, Audio Test and Measurement Amplifier.

🎧

Monoblock Subwoofer Amplifier

The LM2876TF fits a monoblock subwoofer output stage because it is specified for 40 W continuous average power into an 8 ohm load with 0.1% THD+N from 20 Hz to 20 kHz. Place the amplifier in the final power stage, then add the crossover, input filtering, offset control, and output network required by the selected loudspeaker. The 20 V to 60 V supply can support the output voltage needed for high-power operation, while SPiKe protection helps manage instantaneous thermal events. The enclosure and heatsink must dissipate continuous Class AB losses rather than only short-lived musical peaks.

🔊

Powered Speaker Output Stage

For a powered bookshelf or floor-standing speaker, the LM2876TF can provide a 40 W Class AB mono output stage from a 20 V to 60 V supply. The 8 ohm load rating aligns with common passive speaker configurations, while the stated 0.1% THD+N across 20 Hz to 20 kHz provides a clear distortion target for amplifier selection. The LM2876TF is placed after preamplification and volume control, with the signal level adjusted so the amplifier does not enter clipping. A thermally sized heatsink and low-impedance output routing are essential because sustained high-level music can raise dissipation substantially.

📺

Home Theater Amplifier

The LM2876TF can serve as a mono power channel in a home-theater or multichannel audio amplifier, especially where each channel drives an 8 ohm loudspeaker or speaker group. Its 40 W continuous average capability and 20 Hz to 20 kHz distortion specification suit audio-band amplification, while mute supports controlled channel or system enable functions. The designer should coordinate the device with a preamplifier that prevents excessive input drive, implement channel-specific gain structure, and verify thermal performance in a closed enclosure. SPiKe protection addresses instantaneous thermal peaks but does not replace speaker DC blocking, overload control, or system-level protection.

🎵

Hi-Fi Stereo Amplifier

In a high-power stereo design, two LM2876TF devices can form a left and right Class AB output pair, each rated to deliver 40 W continuous average power into an 8 ohm load. The device operates from a 20 V to 60 V supply, which makes it appropriate for a dedicated high-voltage power-transformer and rectifier arrangement. Low THD+N is relevant to preserving small musical signals near the output stage. Symmetrical layout, carefully routed feedback and output paths, and independent channel testing are important. Each package requires adequate heatsinking, and the bias and feedback components must follow the manufacturer reference circuit.

🏭

Industrial Audio Driver

The LM2876TF is suitable for a dedicated industrial or commercial audio driver when the load is an 8 ohm speaker and the enclosure can accommodate its heat dissipation. The 40 W continuous output rating supports stronger sound-pressure levels than low-power headphone or line-level amplifiers, while the mute input can support panel-driven channel control. Industrial systems may also require DC-offset prevention, over-temperature shutdown, fuse coordination, and robust output protection around the amplifier. The 20 V to 60 V supply design must include regulation adequate for peak audio demand, while SPiKe handles the amplifier’s instantaneous thermal stress.

🖥️

Audio Test and Measurement Amplifier

The LM2876TF can provide a high-power Class AB output stage for a loudspeaker test fixture, acoustic measurement system, or laboratory audio driver. Its 0.1% THD+N specification from 20 Hz to 20 kHz and 40 W continuous average output into 8 ohms provide a useful starting point for controlled test signals. The amplifier should be operated within the stated supply range, with output protection and DC blocking designed for the fixture. Because distortion and thermal behavior depend on signal level and frequency, use controlled test waveforms and verify the thermal design under sustained operation rather than assuming nominal output power applies to every waveform.

추천 제품 요약

LM2876TF Texas Instruments 사용처: Monoblock Subwoofer Amplifier, Powered Speaker Output Stage, Home Theater Amplifier, Hi-Fi Stereo Amplifier, Industrial Audio Driver, Audio Test and Measurement Amplifier LM2876TF/NOPB NOPB ordering option for the same amplifier function 사용처: Monoblock Subwoofer Amplifier, Powered Speaker Output Stage, Home Theater Amplifier, Hi-Fi Stereo Amplifier, Industrial Audio Driver, Audio Test and Measurement Amplifier
What is the LM2876TF?
The LM2876TF is a Texas Instruments 40 W mono Class AB audio power amplifier with mute and SPiKe protection. According to the manufacturer product page, it is intended to deliver continuous average audio power into an 8 ohm load from a 20 V to 60 V supply. The device uses an isolated 11-pin TO-220 package and is suited to high-power monoblock, subwoofer, home-theater, and powered-speaker amplifier designs.
How much power can the LM2876TF deliver?
The LM2876TF can deliver 40 W of continuous average output power into an 8 ohm load. Texas Instruments specifies 0.1% THD+N from 20 Hz to 20 kHz under the associated test conditions. This rating should be used as the primary continuous-output design target, with the amplifier’s supply, heatsink, copper area, and enclosure thermal limits checked for the intended load and ambient temperature.
What is the supply voltage range of LM2876TF?
The LM2876TF operates from a 20 V to 60 V supply. According to the Texas Instruments LM2876 product information, this high-voltage range supports conventional high-power audio output stages. The selected supply should remain within the device limits under normal regulation, transient, and fault conditions, while the total power dissipation at the chosen output level must also remain compatible with the package and heatsink design.
What does LM2876TF/NOPB mean?
LM2876TF/NOPB is the ordering designation associated with the same Texas Instruments LM2876 40 W mono Class AB audio amplifier. The manufacturer listing identifies the NOPB version as a 1-channel Class AB amplifier in an isolated TO-220-11 package. The NOPB suffix is a specific ordering code rather than a different circuit function, and the manufacturer data identifies the NOPB part as orderable.
Where can I download the LM2876TF datasheet?
Download the LM2876 documentation from the official Texas Instruments product page at https://www.ti.com/product/LM2876. The page provides the manufacturer datasheet, product details, ordering information, and support resources. When reviewing the LM2876TF, use the LM2876 family datasheet and the pin-description table to verify the TO-220-11 connections before assigning PCB tracks or making external connections.
Where is the LM2876TF pinout?
The LM2876TF pinout is documented in the LM2876 manufacturer datasheet associated with the Texas Instruments product page. The device has 11 pins in an isolated TO-220-11 package, so a standard three-lead TO-220 pinout is not suitable. Use the package-specific pin-description table and isolation requirements when assigning signal, supply, mute, output, and thermal or connection functions.
What can replace the LM2876TF?
The LM2876TF/NOPB is the closest documented drop-in ordering option because it retains the 40 W Class AB output, 20 V to 60 V supply range, and isolated TO-220-11 package. A replacement should be checked for exact pin functions, output topology, mute polarity, protection behavior, thermal limits, and load compatibility. The manufacturer ordering information should be used to confirm the appropriate suffix for production quantities and packaging.
Is LM2876TF the same as LM2876TF/NOPB?
LM2876TF and LM2876TF/NOPB identify orderable versions of the Texas Instruments LM2876 family with the same stated 40 W mono Class AB amplifier function and TO-220-11 package. The distinction is the ordering suffix, so the appropriate NOPB version should be selected when that lead-free ordering code is required. Confirm the exact suffix, quantity, and package marking against the manufacturer ordering table.
Is LM2876TF suitable for a subwoofer amplifier?
Yes, the LM2876TF is suitable for a high-power monoblock subwoofer amplifier when the output stage is designed around an 8 ohm load and 20 V to 60 V supply. Its 40 W continuous average output rating and 0.1% THD+N specification from 20 Hz to 20 kHz provide a useful starting point. Subwoofer crossover, protection, thermal management, and output-filtering requirements should be handled by the surrounding amplifier design.
When should I choose LM2876TF instead of a lower-power audio amplifier?
Choose the LM2876TF when the design requires up to 40 W continuous average output into an 8 ohm load and can provide a compliant 20 V to 60 V supply with substantial thermal management. A lower-power amplifier may be preferable for smaller speakers, lower supply voltages, or less demanding thermal conditions. The choice should be based on continuous loudspeaker power, headroom, distortion, protection, and available heatsinking.
What are the key specifications of LM2876TF that engineers should know?
The LM2876TF’s core specifications are 40 W continuous average output power, an 8 ohm rated load, a 20 V to 60 V supply range, and 0.1% THD+N from 20 Hz to 20 kHz. Texas Instruments also identifies Class AB operation, a mute function, SPiKe instantaneous-temperature protection, and an isolated 11-pin TO-220 package. These parameters jointly determine load capability, supply design, distortion expectations, protection needs, and thermal implementation.
How should the LM2876TF be heatsunk?
Heat-sink the LM2876TF according to its calculated dissipation and the required ambient-temperature margin. Estimated: transistor dissipation equals the power delivered to the speaker plus amplifier and bias losses, so the actual junction temperature depends on the supply voltage, output waveform, load, and thermal resistance. Use the manufacturer thermal information to select the heatsink and verify junction temperature at worst-case continuous music power rather than using input power alone.
Does LM2876TF include speaker protection?
The LM2876TF includes SPiKe protection, which Texas Instruments describes as providing inherently dynamic protection against instantaneous thermal peaks. This is amplifier thermal protection and should not be treated as a complete loudspeaker-protection solution. Consider separate mechanisms for overload, short circuit, DC offset, temperature, and crossover requirements where the end application demands them.
Where to buy LM2876TF online?
Use the Request a Quote form on this page to request LM2876TF availability, current lead time, and order handling. Confirm the exact LM2876TF suffix, TO-220-11 package, and production quantity before approval. The manufacturer product page and ordering information remain the authoritative references for lifecycle, ordering codes, and device documentation.
What is the price of LM2876TF?
The current LM2876TF price is presented through the Request a Quote form on this page. Quote inputs should include the exact LM2876TF ordering suffix, required quantity, shipment destination, and preferred packaging. Because distributor pricing and availability can change with quantity and inventory, request the current commercial terms rather than relying on a historical listing amount.
What is the lead time for LM2876TF?
The current LM2876TF lead time should be requested through the Request a Quote form on this page. Include the required quantity, shipment destination, and whether LM2876TF or LM2876TF/NOPB is required. For production planning, confirm the exact ordering code and package because lead time and availability may differ between manufacturer suffixes or distribution channels.

엔지니어링 참조 데이터: LM2876TF — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose LM2876TF for a high-power mono Class AB audio stage that can deliver 40 W continuous average power into an 8 ohm load from a 20 V to 60 V supply. It is appropriate for monoblock subwoofers, powered speakers, home-theater channels, stereo output stages, and high-power test fixtures. Choose LM2876TF/NOPB when that manufacturer ordering suffix is required; its electrical ratings and package remain aligned with LM2876TF. For designs requiring less than 40 W, a lower supply voltage, or a smaller package, a lower-power amplifier may simplify thermal management. Do not select a generic three-lead TO-220 amplifier as a substitute because the LM2876 uses an 11-pin package and its pin functions must be verified directly from the LM2876 datasheet. Final selection should also confirm mute polarity, feedback topology, protection requirements, and enclosure thermal performance.

대체품과의 비교

파라미터 이 제품 LM2876TF/NOPB
Brand Texas Instruments Texas Instruments
Package TO-220-11 TO-220-11 - same
Amplifier Type Mono Class AB audio power amplifier Mono Class AB audio power amplifier
Continuous Output Power 40 W 40 W
Load Impedance 8 ohm 8 ohm
Supply Voltage Range 20 V to 60 V 20 V to 60 V
THD+N 0.1% from 20 Hz to 20 kHz under stated test conditions 0.1% from 20 Hz to 20 kHz under stated test conditions
Number of Channels 1 channel 1 channel
Mute Function Yes Yes
Protection SPiKe instantaneous-temperature protection SPiKe instantaneous-temperature protection

주요 차별점

  • Full 40 W Class AB mono output in an audio power-amplifier package (vs LM2876TF/NOPB)
  • High-voltage supply capability for high-power audio stages (vs LM2876TF/NOPB)
  • Integrated mute and SPiKe protection functions (vs LM2876TF/NOPB)

설계 노트

Size the heatsink for continuous Class AB dissipation rather than the 40 W output rating alone. Estimated: amplifier dissipation is the DC power delivered to the load plus transistor, bias, and switching losses, with actual junction temperature determined by package thermal resistance, heatsink resistance, copper area, airflow, and ambient temperature. Validate the worst-case music condition in the intended enclosure and confirm the operating-temperature limit against the manufacturer datasheet.

Use the manufacturer reference layout for the TO-220-11 device, especially because this 11-lead package is not equivalent to a standard three-lead TO-220. Keep the high-current supply and speaker-output paths short, use adequate copper width, and minimize loop area. Place input, feedback, and ground returns away from output and rectifier currents. Confirm every physical pin function against the package-specific pin-description table before fabrication.

Design the 20 V to 60 V supply for the output voltage swing, regulation, and current required at 40 W into 8 ohms. The ideal sinusoidal voltage for 40 W into 8 ohms is approximately 17.9 Vrms, but real Class AB output stages require additional supply headroom. Use transformer, rectifier, reservoir-capacitor, and protection arrangements based on the manufacturer reference design, and account for startup, line variation, and inrush behavior.

Do not treat SPiKe protection as a substitute for loudspeaker protection. DC offset, short circuits, excessive temperature, and loudspeaker overload may require separate system-level protection. Also do not substitute a standard TO-220 pinout for the TO-220-11 arrangement, and do not infer the correct mute polarity or signal-ground connection from a generic three-pin power-amplifier convention. Use the LM2876 manufacturer pin table and application circuit as the wiring authority.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The LM2876TF/NOPB ordering designation identifies a lead-free option, but no explicit RoHS, REACH, halogen-free, or conflict-minerals declaration is included in the referenced product information. Automotive qualification is not applicable to this audio power amplifier.

데이터 검증일: 2026-11-10 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

lm2876tf datasheet lm2876tf nopb LM2876TF datasheet pdf LM2876TF pinout LM2876TF TO-220-11 LM2876TF 40W amplifier LM2876TF 20V 60V supply LM2876TF subwoofer amplifier LM2876TF replacement LM2876TF vs LM2876TF/NOPB LM2876TF price Texas Instruments LM2876TF

관련 부품 & 용어

Texas Instruments LM2876TF LM2876TF/NOPB LM2876 Class AB audio power amplifier mono amplifier audio amplifier IC linear power amplifier semiconductor THD+N total harmonic distortion plus noise continuous average output power 8 ohm load 20 V to 60 V power supply SPiKe protection Self Peak Instantaneous Temperature protection mute function TO-220-11 TO-220 package family through-hole mounting surface mount subwoofer amplifier home theater amplifier powered speaker RoHS
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기