Texas Instruments

LM2904VQDRQ1 - Dual 30V 700kHz Op Amp | Texas Instruments

부품 번호: LM2904VQDRQ1 ✓ 활성
30 V Vdss 8-pin SOIC, 3.90 mm width Package
MOQ: 1 |

LM2904VQDRQ1 개요

The Texas Instruments LM2904VQDRQ1 is a dual general-purpose operational amplifier rated for a 30 V total supply voltage, 700 kHz gain-bandwidth product, and operation from -40°C to 125°C. The device is offered in an 8-pin SOIC package and is qualified to AEC-Q100 for automotive applications. Each channel provides independent input and output connections, allowing the amplifier to implement two signal-processing functions or to remain available for additional circuit requirements.

An operational amplifier is an analog integrated circuit that uses high open-loop gain and negative feedback to amplify the difference between two input voltages. The LM2904 family belongs to the operational-amplifier hierarchy within analog and mixed-signal semiconductors. Its dual-channel architecture makes it useful for general-purpose signal conditioning, buffering, feedback amplification, voltage comparison, and instrumentation functions where a wide supply-voltage range and elevated-temperature capability are valuable.

The principal performance characteristics include two amplifier channels, a 700 kHz gain-bandwidth product, and a maximum total supply voltage of 30 V. The manufacturer identifies the LM2904VQDRQ1 as an automotive AEC-Q100-qualified dual operational amplifier in an 8-SOIC package. It also has a high-gain configuration suitable for closed-loop amplifier stages and comparator-like functions. These characteristics position it between precision low-noise amplifiers and high-speed wideband amplifiers: it provides more bandwidth than a basic general-purpose amplifier while retaining a simple, industry-standard package.

The LM2904V product family uses conventional internal compensation and is intended for general-purpose operation rather than rail-to-rail input or output designs. Its supply-voltage tolerance permits operation from automotive and industrial battery-derived rails, although each application must remain within the device's absolute maximum and recommended operating limits. Because both amplifiers share the same package, their power rails are common, while the signal inputs and outputs remain independent.

Typical automotive uses include low-frequency sensor conditioning, actuator signal interfaces, active filtering, and general control-system analog channels. The same device can support industrial instrumentation, audio and communications interfaces, and voltage-feedback amplifier stages. For dual-rail designs, the two channels can process related or unrelated signals, allowing a more compact implementation than two separate single-channel amplifiers.

Designers should verify input and output common-mode ranges, output swing, stability with the selected feedback network, and noise performance against their signal bandwidth. The SOIC outline also requires attention to exposed copper and thermal dissipation when operating continuously near the upper temperature limit. Bypass capacitors should be placed close to the supply pins, and sensitive input traces should remain short and away from switching nodes.

This product page combines the exact ordering information, operating limits, package details, automotive qualification, pin assignment, qualification alternatives, and application-oriented design guidance for LM2904VQDRQ1. It is intended to help engineers determine whether this dual, 30 V, 700 kHz operational amplifier fits a new design or can be introduced through a controlled board-level replacement process.

드롭인 대체품: LM2904VQDRQ1 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: LM2904VQDRQ1 (동일 폼 팩터 및 풋프린트) — 차이점: Gain-Bandwidth Product, Maximum Supply Voltage, Package, Number of Channels, Automotive Qualification.

Texas Instruments
Gain-Bandwidth Product: 1 MHz
Maximum Supply Voltage: 5.5 V
Package: 8-pin SOIC
비교 대상: LM2904VQDRQ1 →
Texas Instruments
Gain-Bandwidth Product: 700 kHz (typ)
Package: SOIC-8 (D)
Number of Channels: 2
비교 대상: LM2904VQDRQ1 →
Texas Instruments
Maximum Supply Voltage: 30 V
비교 대상: LM2904VQDRQ1 →

LM2904VQDR

✅ 드롭인
Texas Instruments
📦 8-SOIC
General-Purpose Operational Amplifier · 2 channels · Bipolar voltage-feedback · 30 V · 700 kHz · -40 °C to 125 °C · 8-pin SOIC · 0.154 in (3.90 mm)

가격 문의

데이터시트 보기 →

LM2904QDRQ1

✅ 드롭인
Texas Instruments
📦 8-SOIC
2 · 3 V to 26 V · ±1.5 V to ±13 V · 700 kHz (typ) · 0.3 V/us (typ) · 2 mV (typ), 7 mV (max) · 20 nA (typ) · 500 uA (typ)

✗ 재고 없음

$0.22 / 개

데이터시트 보기 →

LM2904LVQDRQ1

✅ 드롭인
Texas Instruments
📦 8-SOIC
General-purpose operational amplifier · 2 channels · 2 amplifiers · 5.5 V · 2.7 V to 5.5 V · 1 MHz · 3 mV · Automotive grade

가격 문의

데이터시트 보기 →

LM2904VQDRQ1 최대 정격 & 전기적 특성

Product Type Dual general-purpose operational amplifier
Number of Channels 2 channels
Maximum Total Supply Voltage 30 V
Maximum Supply Voltage 32 V
Gain-Bandwidth Product 700 kHz
동작 온도 범위 -40°C to +125°C
패키지 8-pin SOIC, 3.90 mm width
실장 유형 Surface mount
Automotive Qualification AEC-Q100 qualified
수명 주기 상태 Active

LM2904VQDRQ1 핀 구성

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
핀 1 OUT A — Output of amplifier A
핀 2 IN A- — Inverting input of amplifier A
핀 3 IN A+ — Non-inverting input of amplifier A
핀 4 V- — Negative supply connection
핀 5 IN B+ — Non-inverting input of amplifier B
핀 6 IN B- — Inverting input of amplifier B
핀 7 OUT B — Output of amplifier B
핀 8 V+ — Positive supply connection

일반적인 애플리케이션

LM2904VQDRQ1 적합 용도: 6 애플리케이션s: Automotive Sensor Signal Conditioning, Industrial Instrumentation Amplification, Active Audio and Communication Filtering, Voltage Feedback Control Loops, Battery and Power-Supply Monitoring, Data Acquisition and Sensor Interfaces.

🚗

Automotive Sensor Signal Conditioning

The LM2904VQDRQ1 fits low-frequency automotive sensor conditioning because it combines two amplifier channels, a 700 kHz gain-bandwidth product, and operation across -40°C to 125°C in an AEC-Q100-qualified 8-pin SOIC package. Place one channel in a non-inverting or differential amplifier stage around a resistive sensor and use the second channel for an active filter, reference buffer, or output-conditioning stage. The dual layout can reduce the number of separate amplifier packages on a control board. Because this is a general-purpose rather than rail-to-rail amplifier, verify the sensor’s common-mode range and the required output swing across the automotive supply range. Input protection, ground-return routing, and filter stability should be evaluated before production release.

🏭

Industrial Instrumentation Amplification

The LM2904VQDRQ1 is suitable for general industrial instrumentation where two analog channels must be amplified within a 30 V maximum total supply environment. Its 700 kHz gain-bandwidth product supports low-to-moderate-bandwidth sensor and process-control signals, while the 8-pin SOIC package supports compact, surface-mounted control assemblies. A typical implementation uses one channel for a low-level sensor stage and the other for a buffer or active anti-alias filter. The integrated circuit is not rail-to-rail, so the common-mode and output ranges must be checked against the transducer interface. Place the power bypass capacitor near pin 8 and connect pin 4 to the ground reference through a low-impedance return path to minimize channel interaction.

🎧

Active Audio and Communication Filtering

The LM2904VQDRQ1 can implement first- and second-order active filters or signal-conditioning stages for communications and audio interfaces because each channel provides independent gain and filtering functions. The 700 kHz gain-bandwidth product is appropriate for low-frequency tasks such as microphone preamplification, anti-alias filtering, and line-level buffering when the closed-loop gain is chosen with adequate stability margin. Its 30 V maximum total supply rating also accommodates higher-amplitude analog stages within the specified operating limits. Avoid using the device as a rail-to-rail line driver because that is not an identified capability. Validate output swing, distortion, noise, and channel-to-channel behavior in the completed network, especially when the input or output approaches a supply rail.

⚡

Voltage Feedback Control Loops

The LM2904VQDRQ1 is appropriate for conventional voltage-feedback control and feedback-amplifier circuits requiring a gain-bandwidth product of 700 kHz. One channel can implement the forward error amplifier while the other provides feedback monitoring or a secondary compensation function. The 8-pin SOIC arrangement simplifies routing in multi-loop industrial or automotive electronics, and the -40°C to 125°C range supports harsh-temperature operation. Designers should select resistor and capacitor values that preserve phase margin across the intended gain, load, and supply range. Keep feedback traces short, isolate the output from sensitive input routing, and check the loop response rather than relying only on the device’s gain-bandwidth figure. The manufacturer datasheet should govern all recommended operating and stability conditions.

🔋

Battery and Power-Supply Monitoring

The LM2904VQDRQ1 can supervise or amplify voltage-monitoring signals in industrial power systems because it accepts a wide supply-voltage environment and operates from -40°C to 125°C. One channel may amplify a divided battery or bus-voltage signal, while the second channel conditions a current-sense or temperature reference for comparison with a threshold. The 700 kHz bandwidth is more than sufficient for many slow monitoring paths, although the final filter should reject switching noise. Place the amplifier near the sensed divider to reduce pickup, use a quiet ground reference, and maintain separation from high-current switch nodes. Verify that the monitored signal stays inside the amplifier’s input common-mode range and that the output remains within the required logic or ADC input range.

📟

Data Acquisition and Sensor Interfaces

The LM2904VQDRQ1 supports compact data-acquisition front ends that require two conditioned channels and a moderate closed-loop bandwidth. Typical uses include transducer amplification, differential-to-single-ended conversion, anti-alias filtering, and buffering of higher-impedance sources. The 700 kHz gain-bandwidth product allows useful bandwidth at lower closed-loop gains, while the 8-pin SOIC package keeps the implementation compact for multichannel analog boards. Because input bias current and offset can affect high-impedance sources, compare the detailed electrical characteristics with the sensor impedance and required accuracy. Use short, guarded input traces and a solid ground plane, and check the ADC acquisition window after adding the output filter to prevent settling errors from degrading conversion accuracy.

What is the LM2904VQDRQ1?
The LM2904VQDRQ1 is a Texas Instruments dual general-purpose operational amplifier with two independent channels, a 700 kHz gain-bandwidth product, and a 30 V maximum total supply rating. According to the manufacturer product page for LM2904V, the family operates from -40°C to 125°C. The LM2904VQDRQ1 ordering configuration is provided in an 8-pin SOIC package and carries automotive AEC-Q100 qualification.
What are the key specifications of LM2904VQDRQ1 that engineers should know?
The LM2904VQDRQ1 combines two operational-amplifier channels with a 700 kHz gain-bandwidth product and a 30 V maximum total supply voltage. The manufacturer product page lists operation from -40°C to 125°C, while the ordering information identifies an 8-pin SOIC package. It is also identified as an AEC-Q100-qualified automotive device. Detailed offset, bias-current, noise, slew-rate, and output-swing limits should be taken from the manufacturer datasheet.
Where can I download the LM2904VQDRQ1 datasheet PDF?
The LM2904VQDRQ1 datasheet can be reached through the Texas Instruments LM2904V product page at https://www.ti.com/product/LM2904V. The LM2904VQDRQ1 is an orderable member of the LM2904-Q1 family. The manufacturer datasheet is the controlling document for the complete pin description, absolute maximum ratings, recommended operating conditions, electrical characteristics, and automotive qualification information.
Where can I find the LM2904VQDRQ1 pinout?
The LM2904VQDRQ1 uses an 8-pin SOIC pinout with two independent amplifier channels. Pins 1 and 7 are the outputs, pins 2 and 6 are inverting inputs, pins 3 and 5 are non-inverting inputs, pin 4 is the negative supply connection, and pin 8 is the positive supply connection. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks and bypass capacitors.
Is LM2904VQDRQ1 suitable for automotive applications?
Yes, LM2904VQDRQ1 is identified as an AEC-Q100-qualified automotive dual operational amplifier in an 8-pin SOIC package. Its stated operating-temperature range extends from -40°C to 125°C. Automotive qualification supports its use in harsh-temperature signal-conditioning designs, but the final circuit must also satisfy the device’s absolute maximum ratings, layout requirements, and system-level EMC validation.
LM2904VQDRQ1 vs LM2904LVQDRQ1 — which is better for low-offset applications?
LM2904LVQDRQ1 is the better choice when lower input offset voltage is the controlling requirement, because the manufacturer product comparison identifies an ultra-low offset voltage of 3 mV for that variant. LM2904VQDRQ1 belongs to the LM2904V family with a listed maximum offset voltage of 7 mV. Both are dual 700 kHz operational amplifiers in 8-pin SOIC packages, but the offset specification should be checked against the required error budget.
LM2904VQDRQ1 vs LM2904QDRQ1 — what is the difference?
The principal documented difference is the input-offset-voltage grade. LM2904QDRQ1 is the non-V version and is listed with a maximum input offset voltage of 2 mV, while LM2904VQDRQ1 is listed with a maximum of 7 mV at 25°C. Both retain two channels, a 700 kHz gain-bandwidth product, and an 8-pin SOIC layout, making the lower-offset grade preferable when DC accuracy matters more.
What is the best drop-in replacement for LM2904VQDRQ1?
LM2904VQDRQ1 and LM2904VQDR share the same 8-pin SOIC package and the documented 700 kHz gain-bandwidth and 0.3 V/µs slew-rate characteristics, so LM2904VQDR is the closest same-family drop-in candidate identified by the cross-reference comparison. Confirm the ordering suffix, temperature grade, AEC-Q100 status, and production configuration before substitution because the available cross-reference information does not establish every qualification detail.
Can LM2904QDRQ1 replace LM2904VQDRQ1?
LM2904QDRQ1 can serve as a pin-compatible candidate because both devices are dual 700 kHz operational amplifiers in an 8-pin SOIC package. Its documented advantage is a lower maximum input offset voltage of 2 mV versus 7 mV for LM2904VQDRQ1. Because the offset difference is large relative to the original limit, verify whether the replacement’s precision grade is desirable and confirm automotive qualification for the exact ordered suffix.
When should I choose LM2904VQDRQ1 instead of LM2904LVQDRQ1?
Choose LM2904VQDRQ1 when the standard LM2904V offset grade, 700 kHz bandwidth, wide supply capability, and 8-pin SOIC footprint meet the design without requiring the LM2904LV variant’s 3 mV ultra-low-offset feature. Choose LM2904LVQDRQ1 when DC offset directly limits measurement accuracy. In either case, evaluate input bias current, common-mode range, output swing, noise, and thermal performance before finalizing the substitution.
Where can I buy LM2904VQDRQ1 online?
Use the Request a Quote form on this page to request LM2904VQDRQ1 availability, order quantity, and current commercial terms. The part is listed as active by manufacturer and distributor product information. A quotation request allows the exact 8-pin SOIC ordering suffix and required shipment quantity to be confirmed without relying on a stale marketplace price or an incorrect package variant.
What is the price of LM2904VQDRQ1?
Current pricing for LM2904VQDRQ1 should be obtained through the Request a Quote form on this page. The exact commercial quote can reflect quantity, packaging, lead time, and current component availability for the 8-pin SOIC ordering configuration. Request the quantity break required for your production build and confirm whether any additional reel or shipment quantities are required.
What is the lead time for LM2904VQDRQ1?
Request the current lead time for LM2904VQDRQ1 using the Request a Quote form on this page. The manufacturer lists the LM2904VQDRQ1 ordering configuration as active, but active lifecycle status alone does not establish a fixed factory lead time. Include your annual usage, forecast, and required reel quantity so the quotation can reflect the appropriate production planning basis.
Is LM2904VQDRQ1 in stock?
Current LM2904VQDRQ1 stock should be confirmed through the Request a Quote form on this page. The exact 8-pin SOIC suffix and required quantity must be checked because catalog pages may combine inventory across different orderable configurations. Submit a request with your required delivery schedule and reel quantity to obtain a current availability response.
What can replace LM2904VQDRQ1?
LM2904VQDR is the closest same-family drop-in candidate identified for LM2904VQDRQ1 because it retains the documented dual-channel architecture, 700 kHz gain-bandwidth, 0.3 V/µs slew rate, and 8-pin SOIC footprint. LM2904QDRQ1 and LM2904LVQDRQ1 are additional pin-compatible family options with different offset-voltage grades. Validate temperature grade, AEC-Q100 status, electrical limits, and manufacturing traceability before production use.
Is LM2904VQDRQ1 the same as LM2904VQDR?
No, the two orderable designations are not interchangeable without qualification. LM2904VQDRQ1 is the Q1 automotive-qualified version, whereas LM2904VQDR lacks the Q1 suffix. The documented electrical characteristics shown for both include two channels, a 700 kHz gain-bandwidth product, and 8-pin SOIC packaging. The automotive qualification status and exact ordering requirements must therefore be checked separately.

엔지니어링 참조 데이터: LM2904VQDRQ1 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose LM2904VQDRQ1 for a dual-channel automotive or industrial general-purpose amplifier design that needs an 8-pin SOIC footprint, 700 kHz gain-bandwidth, and operation across -40°C to 125°C. It is appropriate when the standard LM2904V 7 mV maximum offset grade satisfies the accuracy budget. Select LM2904QDRQ1 when a lower 2 mV maximum offset is useful and the exact ordering suffix meets all qualification requirements. Select LM2904LVQDRQ1 when the 3 mV ultra-low-offset grade is required for higher-accuracy measurement or control paths. LM2904VQDR is the closest same-package, same-bandwidth option, but its lack of the Q1 suffix requires separate automotive qualification review. In every case, verify common-mode range, output swing, input bias current, stability, and temperature-dependent performance before releasing a replacement to production.

대체품과의 비교

파라미터 이 제품 LM2904VQDR LM2904QDRQ1 LM2904LVQDRQ1
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-SOIC 8-SOIC - same 8-SOIC - same 8-SOIC - same
Number of Channels 2 2 2 2
Gain-Bandwidth Product 700 kHz 700 kHz 700 kHz 700 kHz
Slew Rate 0.3 V/us 0.3 V/us 0.3 V/us 0.3 V/us
Maximum Input Offset Voltage at 25°C 7 mV 7 mV 2 mV 3 mV ultra-low offset
Primary Functional Difference Standard V offset grade Standard V offset grade without Q1 suffix Lower 2 mV maximum offset grade Ultra-low 3 mV offset grade

주요 차별점

  • Provides the standard V offset grade with automotive Q1 qualification (vs LM2904VQDR)
  • Lower documented offset limit than the non-V standard grade (vs LM2904QDRQ1)
  • Standard V-grade electrical positioning rather than ultra-low-offset positioning (vs LM2904LVQDRQ1)

설계 노트

Connect the supply bypass capacitor directly between pins 8 and 4, with the ground end returned to a low-impedance ground plane. Keep the 8-pin SOIC footprint and decoupling layout identical when evaluating LM2904QDRQ1 or LM2904LVQDRQ1 as replacements. Route the two channels independently to avoid shared high-impedance feedback traces, and maintain separation from power-switching nodes and motor-drive return currents.

Treat pins 2, 3, 5, and 6 as sensitive high-impedance inputs. Use short traces, avoid routing beneath noisy power stages, and keep the feedback components close to the relevant channel. When the source impedance is high, compare the complete input-bias-current error budget from the manufacturer datasheet with the sensor impedance; the 700 kHz gain-bandwidth value alone does not establish DC accuracy.

Do not assume rail-to-rail input or output behavior, and verify the common-mode input range and output swing against the actual supply arrangement. The -40°C to 125°C operating range does not permit every operating parameter to remain constant over that interval. Use the manufacturer recommended operating conditions and absolute maximum ratings, and confirm output stability with the selected gain, load capacitance, and feedback network.

The 8-pin SOIC package is compact, and continuous automotive or industrial operation near 125°C requires adequate board copper and attention to nearby heat sources. Estimate dissipation from the actual supply voltage, output voltage, load current, and quiescent current, then compare the resulting junction temperature with the device limit. Keep heat-generating regulators and power stages apart from precision analog channels to reduce temperature gradients and offset drift.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The LM2904VQDRQ1 ordering information identifies AEC-Q100 automotive qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not explicitly established for this exact ordering configuration.

데이터 검증일: 2026-11-09 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

LM2904VQDRQ1 datasheet LM2904VQDRQ1 pinout LM2904VQDRQ1 datasheet pdf LM2904VQDRQ1 equivalent LM2904VQDRQ1 replacement LM2904VQDRQ1 drop-in replacement LM2904VQDRQ1 cross reference LM2904VQDRQ1 price LM2904VQDRQ1 stock Texas Instruments LM2904VQDRQ1 LM2904VQDRQ1 700kHz operational amplifier LM2904VQDRQ1 8-SOIC footprint LM2904VQDRQ1 automotive amplifier LM2904VQDRQ1 vs LM2904QDRQ1 LM2904VQDRQ1 application circuit

관련 부품 & 용어

Texas Instruments LM2904VQDRQ1 LM2904VQDR LM2904QDRQ1 LM2904LVQDRQ1 dual operational amplifier general-purpose operational amplifier analog integrated circuit mixed-signal semiconductor voltage-feedback amplifier gain-bandwidth product input offset voltage input bias current common-mode input voltage output voltage swing slew rate 8-pin SOIC SOIC package family surface-mount package AEC-Q100 automotive electronics industrial instrumentation active filter signal conditioning power-supply monitoring
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기