Texas Instruments

LM567CMX - 8-Pin SOIC Tone Decoder | Texas Instruments

부품 번호: LM567CMX ✓ 활성
4.75 V to 9 V Vdss 12 mA Id 8-pin SOIC narrow Package
MOQ: 1 |

LM567CMX 개요

Texas Instruments LM567CMX is a general-purpose tone decoder integrated circuit in an 8-pin SOIC narrow package. It is designed to detect a selected audio-frequency tone and provide a saturated transistor switch to ground when an input signal falls within the decoder passband. The device supports a 4.75 V to 9 V supply range, requires approximately 12 mA of supply current, and is specified for a 0 °C to 70 °C operating-temperature range. The LM567CMX combines I and Q detectors with a voltage-controlled oscillator that determines the center frequency of the decoding passband.

A tone decoder is a type of analog signal-processing circuit used in telecommunications, remote-control, audio, and industrial control systems. It converts the presence of a particular frequency into a logic-compatible switching event, allowing a receiver to recognize a command or carrier signal without continuous frequency measurement by a host processor. In the broader IC hierarchy, the LM567CMX is an analog communications IC, a tone-decoder circuit, and a member of the family of frequency-selective interface and signaling devices.

The principal feature of the LM567CMX is its ability to drive a saturated output transistor when the received signal is within the configured passband. This output can be used as an active control or indicator signal. The LM567 and LM567C architecture is intended for general-purpose tone decoding, with the center frequency established by external timing components. The LM567CMX is the commercial-temperature, 8-pin SOIC orderable identified in the product listings.

The device is appropriate for systems that need a simple, dedicated tone-recognition function, including telephone signaling, alarm and access-control systems, remote controls, industrial control interfaces, and audio equipment. Its narrow SOIC package permits conventional surface-mount assembly, while the limited supply and temperature range make it most suitable for commercial equipment rather than automotive or extended industrial environments.

When designing around the LM567CMX, select the timing components carefully because they determine the decoder center frequency and bandwidth. Confirm signal amplitude and capture behavior at the input, allow adequate bypass capacitance near the supply pins, and account for the output transistor's ground-switching behavior in the load path. The Request a Quote form on this page can be used for current commercial availability, pricing, and lead-time confirmation.

This product page combines the LM567CMX manufacturer datasheet, verified distributor product information, package details, application guidance, and clearly identified drop-in alternatives. It is intended to help engineers confirm electrical limits, pin compatibility, sourcing requirements, and implementation trade-offs before committing a tone-decoder design to production.

드롭인 대체품: LM567CMX — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

LM567CMX/NOPB

✅ 드롭인
📦 8-pin SOIC narrow
Same 8-pin SOIC tone-decoder configuration; suffix-specific finish and ordering requirements require verification

📋 참조 대체품 (카탈로그에 없음)

LM567CM/NOPB

✅ 드롭인
📦 8-pin SOIC narrow
Same 8-pin SOIC tone-decoder family; package code and MPN suffix differ by up to one ordering character

📋 참조 대체품 (카탈로그에 없음)

LMC567CMX

✅ 드롭인
📦 8-pin SOIC narrow
Same 8-terminal SOP tone-decoder format; supplier-specific pinout, electrical limits, and qualification require comparison

📋 참조 대체품 (카탈로그에 없음)

LM567CMX 사양

Device Type General-purpose tone decoder
Architecture I and Q detectors with voltage-controlled oscillator
Supply Voltage Range 4.75 V to 9 V
공급 전류 12 mA
Number of Circuits 1 circuit
출력 유형 Saturated transistor switch to ground
동작 온도 범위 0 °C to 70 °C
Power Dissipation 1.10 W
패키지 8-pin SOIC narrow
Package Code SOP
Package Shape Rectangular
Terminal Form Gull wing
Number of Terminals 8
Temperature Grade Commercial
Lead-Free Status Contains lead

LM567CMX 핀 구성

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
핀 1 [DATA_NEEDED: pin 1 name] — [DATA_NEEDED: pin 1 description]
핀 2 [DATA_NEEDED: pin 2 name] — [DATA_NEEDED: pin 2 description]
핀 3 [DATA_NEEDED: pin 3 name] — [DATA_NEEDED: pin 3 description]
핀 4 [DATA_NEEDED: pin 4 name] — [DATA_NEEDED: pin 4 description]
핀 5 [DATA_NEEDED: pin 5 name] — [DATA_NEEDED: pin 5 description]
핀 6 [DATA_NEEDED: pin 6 name] — [DATA_NEEDED: pin 6 description]
핀 7 [DATA_NEEDED: pin 7 name] — [DATA_NEEDED: pin 7 description]
핀 8 [DATA_NEEDED: pin 8 name] — [DATA_NEEDED: pin 8 description]

일반적인 애플리케이션

LM567CMX 적합 용도: 6 애플리케이션s: Telephone and telecom tone signaling, Remote-control command detection, Industrial equipment control interfaces, Audio control and alarm signaling, Wireless control and security receivers, Instrumentation and test-equipment trigger circuits.

🌐

Telephone and telecom tone signaling

The LM567CMX is suitable for fixed-frequency tone recognition in telephone and telecommunications signaling circuits. Its I and Q detector architecture provides a hardware indication when the incoming signal falls within the decoder passband, while the saturated transistor output offers a direct interface to control logic. Operating from 4.75 V to 9 V with approximately 12 mA supply current makes it practical for compact line-powered or regulated signaling modules. The design must configure the timing components for the intended tone, verify capture behavior across input amplitude and frequency tolerance, and provide clean supply bypassing near the 8-pin SOIC.

📱

Remote-control command detection

The LM567CMX can decode a predetermined command tone in audio-frequency remote-control receivers without requiring a host processor to measure frequency continuously. The transistor output changes state when a valid tone is captured, allowing the receiver to trigger a relay, latch an action, or notify another controller. Its 8-pin SOIC footprint supports compact surface-mount assemblies, and the 0 °C to 70 °C commercial range suits room-temperature products. Engineers should allow sufficient signal level at the decoder input, tune the loop for the intended center frequency and bandwidth, and validate false-trigger behavior under noise and neighboring-carrier conditions.

🏭

Industrial equipment control interfaces

A tone-coded interface can use the LM567CMX to recognize a command at a remote panel before allowing machinery or a peripheral to change state. The dedicated detector reduces microcontroller workload and provides a direct hardware decision, while the saturated output transistor can drive a suitable interface stage. The 4.75 V to 9 V supply range supports conventional industrial control rails, and the 8-pin SOIC package simplifies mixed analog and logic layouts. For installations outside the 0 °C to 70 °C range, select a suitably qualified exact orderable and verify signal levels, isolation boundaries, output current, and fail-safe behavior.

🎧

Audio control and alarm signaling

The LM567CMX can serve as the tone-recognition element in audio consoles, alarm panels, paging systems, and intercom accessories. Its function is to indicate the presence of a selected frequency rather than reproduce or decode a full digital audio stream, making it appropriate for simple alert and control tones. The narrow SOIC package preserves board area, and the specified 12 mA supply current is manageable for a small analog front end. Layout should keep the tone network physically stable, reference a low-noise supply, and include filtering appropriate to the audio bandwidth so unintended frequencies do not trigger the output.

🧩

Wireless control and security receivers

A wireless receiver can use the LM567CMX as a simple frequency-selective command detector after its RF or audio-frequency output has been converted to a suitable tone. The decoder then provides a hardwired enable or acknowledgement signal to the system controller, reducing the amount of real-time frequency analysis required. The 8-pin SOIC package and 4.75 V to 9 V operating range suit compact receiver modules. The implementation should use the manufacturer's recommended timing network, verify capture bandwidth against transmitter tolerance, and test the receiver against out-of-band tones, noise, adjacent channels, and repeated power-up transients.

🔧

Instrumentation and test-equipment trigger circuits

The LM567CMX can trigger an instrument or data-acquisition system when a known calibration or synchronization tone appears. This provides a simple hardware event independent of the main measurement controller, which can be useful in repetitive test sequences, interface signaling, and bench equipment. The commercial 0 °C to 70 °C specification and narrow 8-pin SOIC package fit ordinary indoor instrumentation. Layout must account for the 1.10 W listed power parameter rather than assuming unrestricted dissipation, and engineers should verify trigger thresholds, timing accuracy, output polarity, and behavior when multiple tones are present simultaneously.

추천 제품 요약

LM567CM/NOPB Same-family 8-pin SOIC tone-decoder option 사용처: Telephone and telecom tone signaling, Industrial equipment control interfaces, Audio control and alarm signaling, Instrumentation and test-equipment trigger circuits LM567CMX/NOPB Suffix-specific 8-pin SOIC tone-decoder option 사용처: Telephone and telecom tone signaling, Remote-control command detection, Industrial equipment control interfaces, Audio control and alarm signaling, Wireless control and security receivers, Instrumentation and test-equipment trigger circuits LMC567CMX Cross-supplier 8-terminal tone-decoder candidate 사용처: Remote-control command detection, Wireless control and security receivers
What is the operating voltage of LM567CMX?
The LM567CMX operates from 4.75 V to 9 V. According to the Texas Instruments LM567C datasheet, the recommended supply range supports the general-purpose tone-decoder circuit in commercial-temperature equipment. The listed supply current is approximately 12 mA, so the power rail should be sized with normal regulator tolerance and bypass capacitance. The 1.10 W power figure is a device specification rather than a recommended continuous dissipation target; use the datasheet thermal limits when laying out the board.
What does the LM567CMX do?
The LM567CMX detects a tone within its configured passband and switches a saturated output transistor to ground when a valid signal is present. The circuit uses I and Q detectors driven by a voltage-controlled oscillator to establish the center frequency. According to the Texas Instruments LM567C datasheet, it is intended for general-purpose tone decoding in telecommunications and control systems. The output is a hardware indication rather than a serial data stream, making the device suitable for simple signaling and command recognition.
Where can I download the LM567CMX datasheet PDF?
The official LM567CMX datasheet PDF is available from Texas Instruments at the LM567C datasheet link on this page. The document is titled “LM567x Tone Decoder” and covers the LM567 and LM567C devices, including the LM567CMX commercial-temperature, 8-pin SOIC configuration. Use the pin-description table and application information in that manufacturer document when assigning PCB signals, selecting timing components, and checking operating limits.
Where can I find the LM567CMX pinout?
Use the pin-description table in the Texas Instruments LM567C datasheet for the authoritative LM567CMX pin assignments. The verified product information identifies the LM567CMX as an 8-pin SOIC tone decoder, and the corresponding package diagram is provided through the package resource on this page. Keep signal and supply routing consistent with the numbering shown in the SOIC footprint and verify every connection against the manufacturer datasheet before fabrication.
How much current does the LM567CMX consume?
The LM567CMX supply current is listed as approximately 12 mA. According to the Texas Instruments LM567C datasheet, the device is a single tone-decoder circuit intended for a 4.75 V to 9 V supply. Actual current can vary with supply voltage, output state, and external timing values, so the power design should use the datasheet maximum rather than the nominal listing alone. Add local supply bypassing and account for the output transistor's switching load separately.
What is the temperature range of LM567CMX?
The LM567CMX is specified for a 0 °C to 70 °C operating-temperature range. According to the Texas Instruments LM567C datasheet, the CMX orderable is a commercial-temperature version in an 8-pin SOIC package. This range suits room-temperature telecom, signaling, and industrial-control products. It should not be treated as an automotive-qualified or extended-temperature part unless the exact replacement selected carries the required qualification and environmental ratings.
Is LM567CMX the same as LM567CMX/NOPB?
The LM567CMX and LM567CMX/NOPB identify closely related 8-pin SOIC tone-decoder configurations, but the NOPB ordering suffix requires review against the manufacturer labeling and ordering information for procurement requirements. Both parts are listed as Texas Instruments 8-SOIC tone decoders. When considering LM567CMX/NOPB as a replacement, verify the exact suffix, temperature grade, package, pinout, and any finish-related requirement in the current manufacturer documentation before approving it.
What is the best drop-in replacement for LM567CMX?
The closest drop-in candidates are the Texas Instruments LM567CMX/NOPB and LM567CM/NOPB because they retain the 8-pin SOIC tone-decoder format and are indexed as compatible orderable variants. Confirm the exact pin assignments, supply range, temperature grade, and timing-component configuration in the manufacturer datasheet before substitution. The cross-brand equivalent should be selected only when a source explicitly confirms pin-to-pin compatibility and equivalent electrical performance.
Can LMC567CMX replace the Texas Instruments LM567CMX?
An LMC567CMX is a related National Semiconductor tone-decoder ordering code, but it should be treated as a qualified replacement rather than an automatic substitution. The verified cross-reference listing identifies the 8-terminal SOP tone-decoder format, while the two suppliers' ordering information must still be checked for pinout, electrical limits, frequency range, output behavior, and lifecycle status. Use the Request a Quote form when the exact sourcing package and documentation need to be confirmed.
LM567CMX vs LM567CM/NOPB: which one should I choose?
Choose the LM567CMX when its documented ordering code, finish, and environmental requirements match the design; choose LM567CM/NOPB only after checking its suffix-specific manufacturer information. Both appear in product listings as 8-pin SOIC tone decoders, making them the closest same-footprint options. The key decision is not package fit alone but exact qualification, marking, supply, and procurement requirements. Review the current manufacturer datasheet and ordering information before substitution.
When should I choose LM567CMX instead of a microcontroller-based tone detector?
Choose the LM567CMX when a fixed tone must be recognized reliably with minimal firmware, a small PCB area, and a direct transistor output. A microcontroller-based detector is preferable when the target frequency must be reprogrammable, several tones must be decoded, or decoded data requires a serial interface. The LM567CMX provides dedicated analog hardware with approximately 12 mA supply current in an 8-pin SOIC, giving it a clear role in simple signaling systems.
Is LM567CMX suitable for industrial signaling and remote-control systems?
The LM567CMX can suit commercial-temperature signaling and remote-control systems because it provides a dedicated tone-detector output and operates from 4.75 V to 9 V. Its specified 0 °C to 70 °C range is appropriate for indoor or room-temperature equipment. For installations with wider temperature exposure, strict automotive qualification, or extended industrial requirements, choose a part whose exact ordering code is rated for those environmental conditions instead of assuming the CMX grade covers them.
What are the key specifications of LM567CMX that engineers should know?
The key LM567CMX specifications are a 4.75 V to 9 V supply range, approximately 12 mA supply current, one tone-decoding circuit, a 0 °C to 70 °C commercial operating range, and an 8-pin SOIC narrow package. According to the Texas Instruments LM567C datasheet, the internal I and Q detectors are driven by a voltage-controlled oscillator that establishes the decoder center frequency. The saturated transistor output switches to ground when a signal is detected within the passband.
Where to buy LM567CMX online?
The LM567CMX can be requested through the Request a Quote form on this page for current commercial availability, price, and lead-time confirmation. The exact orderable suffix should be stated in the request so procurement can distinguish LM567CMX from LM567CMX/NOPB and LM567CM/NOPB. Confirm the manufacturer product page and approved supplier documentation before purchase, particularly when the lead-free, marking, or qualification requirements are part of the build.
What is the price of LM567CMX?
Current LM567CMX commercial pricing is best obtained through the Request a Quote form on this page because quotation terms and availability can change by suffix, quantity, and market conditions. The verified listings confirm that the exact MPN is offered as an 8-SOIC tone decoder, but they do not expose a qualifying quantity-break table for LM567CMX. Submit the required quantity and exact suffix with the request so the commercial response reflects the correct orderable.
What is the lead time for LM567CMX?
Use the Request a Quote form on this page to request the current lead time for LM567CMX. Lead time depends on the exact orderable code, production status, package configuration, and requested quantity, so it should not be inferred from a distributor listing or from related LM567 variants. State whether LM567CMX, LM567CMX/NOPB, or LM567CM/NOPB is required and include the project quantity to obtain an actionable commercial response.
Is LM567CMX in stock?
Current LM567CMX inventory should be confirmed through the Request a Quote form on this page because availability can change after the product information is retrieved. The exact MPN is listed by authorized distributors as an 8-SOIC tone decoder, but a listing alone does not guarantee the quantity required for a production build. Include target quantity, acceptable pack style, and the required suffix in the request to obtain a firm allocation and lead time.

엔지니어링 참조 데이터: LM567CMX — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the LM567CMX for a compact commercial-temperature design that recognizes one fixed tone and needs a direct transistor output without continuous microcontroller analysis. Its 4.75 V to 9 V supply, approximately 12 mA supply current, and 8-pin SOIC package fit regulated signaling modules. Select LM567CMX/NOPB when that documented suffix satisfies the product's finish and procurement requirements. Consider LM567CM/NOPB only after confirming the relevant ordering and environmental details for the exact suffix. LMC567CMX is a cross-supplier option to evaluate when sourcing or legacy alignment matters, but its pinout, electrical limits, qualification, and lifecycle status must be checked independently. A microcontroller-based decoder remains preferable when frequencies are programmable, multiple tones must be recognized, or decoded data requires a serial interface.

대체품과의 비교

파라미터 이 제품 LM567CMX/NOPB LM567CM/NOPB LMC567CMX
Package 8-pin SOIC narrow 8-SOIC 8-SOIC tone-decoder package 8-terminal SOP
Brand Texas Instruments Texas Instruments Texas Instruments National Semiconductor
Function General-purpose tone decoder Tone decoder Tone decoder Tone decoder circuit

주요 차별점

  • Dedicated hardware tone recognition (vs Microcontroller-based tone detector)
  • Direct same-package sourcing option (vs LM567CMX/NOPB)
  • Compact eight-pin implementation (vs LMC567CMX)

설계 노트

Place the LM567CMX close to the tone-network components and keep the associated timing and loop components on the same analog section of the PCB. Route the detector input away from switching nodes and high-current return paths, and place the supply bypass capacitor adjacent to the device's supply and ground pins. This separation reduces sensitivity to board-level coupling that could shift capture behavior or produce false detections.

Design the supply for the listed 4.75 V to 9 V operating range and approximately 12 mA supply current. Use a regulator with suitable tolerance and transient response, and confirm the output-switching load separately because the saturated transistor sinks current to ground. Do not treat the listed 1.10 W power value as a design target; use the manufacturer thermal limits and the board's copper area when checking worst-case dissipation.

Verify center frequency, capture bandwidth, and output behavior at the intended input amplitude rather than relying only on a nominal oscillator calculation. Check that neighboring or out-of-band tones do not trigger the decoder, and test repeated power-up and input-overdrive conditions. When substituting an ordering code, confirm the exact pinout, supply limits, temperature grade, and suffix-specific documentation instead of treating the SOIC footprint alone as proof of compatibility.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
No
무할로겐
Unknown
분쟁 광물
Unknown

The verified technical listing states that LM567CMX has a lead-free status of Contains Lead. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals status are not stated in the retrieved product information.

관련 검색

lm567cmx nopb LM567CMX datasheet LM567CMX datasheet pdf LM567CMX pinout LM567CMX equivalent LM567CMX replacement LM567CMX cross reference LM567CMX vs LM567CM/NOPB LM567CMX 8-SOIC tone decoder LM567CMX 4.75V to 9V LM567CMX telecommunications application LM567CMX price LM567CMX stock Texas Instruments LM567CMX

관련 부품 & 용어

Texas Instruments LM567CMX LM567CMX/NOPB LM567CM/NOPB LMC567CMX National Semiconductor tone decoder general-purpose tone decoder analog communications IC frequency-selective interface IC I detector Q detector voltage-controlled oscillator saturated transistor switch 8-pin SOIC SOIC package family surface mount 4.75 V to 9 V supply 12 mA supply current 0 °C to 70 °C operating range telecommunications signaling remote-control receiver industrial control interface audio tone detection RoHS REACH AEC-Q100
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기