LM567CMX - 8-Pin SOIC Tone Decoder | Texas Instruments
料号: LM567CMX ✓ 量产中LM567CMX 概述
A tone decoder is a type of analog signal-processing circuit used in telecommunications, remote-control, audio, and industrial control systems. It converts the presence of a particular frequency into a logic-compatible switching event, allowing a receiver to recognize a command or carrier signal without continuous frequency measurement by a host processor. In the broader IC hierarchy, the LM567CMX is an analog communications IC, a tone-decoder circuit, and a member of the family of frequency-selective interface and signaling devices.
The principal feature of the LM567CMX is its ability to drive a saturated output transistor when the received signal is within the configured passband. This output can be used as an active control or indicator signal. The LM567 and LM567C architecture is intended for general-purpose tone decoding, with the center frequency established by external timing components. The LM567CMX is the commercial-temperature, 8-pin SOIC orderable identified in the product listings.
The device is appropriate for systems that need a simple, dedicated tone-recognition function, including telephone signaling, alarm and access-control systems, remote controls, industrial control interfaces, and audio equipment. Its narrow SOIC package permits conventional surface-mount assembly, while the limited supply and temperature range make it most suitable for commercial equipment rather than automotive or extended industrial environments.
When designing around the LM567CMX, select the timing components carefully because they determine the decoder center frequency and bandwidth. Confirm signal amplitude and capture behavior at the input, allow adequate bypass capacitance near the supply pins, and account for the output transistor's ground-switching behavior in the load path. The Request a Quote form on this page can be used for current commercial availability, pricing, and lead-time confirmation.
This product page combines the LM567CMX manufacturer datasheet, verified distributor product information, package details, application guidance, and clearly identified drop-in alternatives. It is intended to help engineers confirm electrical limits, pin compatibility, sourcing requirements, and implementation trade-offs before committing a tone-decoder design to production.
直接替换替代料: LM567CMX ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
LM567CMX/NOPB
✅ 直接替换📋 参考替代料(不在目录中)
LM567CM/NOPB
✅ 直接替换📋 参考替代料(不在目录中)
LMC567CMX
✅ 直接替换📋 参考替代料(不在目录中)
LM567CMX 规格参数
| Device Type | General-purpose tone decoder |
| Architecture | I and Q detectors with voltage-controlled oscillator |
| Supply Voltage Range | 4.75 V to 9 V |
| 电源电流 | 12 mA |
| Number of Circuits | 1 circuit |
| 输出类型 | Saturated transistor switch to ground |
| 工作温度范围 | 0 °C to 70 °C |
| Power Dissipation | 1.10 W |
| 封装 | 8-pin SOIC narrow |
| Package Code | SOP |
| Package Shape | Rectangular |
| Terminal Form | Gull wing |
| Number of Terminals | 8 |
| Temperature Grade | Commercial |
| Lead-Free Status | Contains lead |
LM567CMX 引脚配置
| 引脚 1 | [DATA_NEEDED: pin 1 name] — [DATA_NEEDED: pin 1 description] |
| 引脚 2 | [DATA_NEEDED: pin 2 name] — [DATA_NEEDED: pin 2 description] |
| 引脚 3 | [DATA_NEEDED: pin 3 name] — [DATA_NEEDED: pin 3 description] |
| 引脚 4 | [DATA_NEEDED: pin 4 name] — [DATA_NEEDED: pin 4 description] |
| 引脚 5 | [DATA_NEEDED: pin 5 name] — [DATA_NEEDED: pin 5 description] |
| 引脚 6 | [DATA_NEEDED: pin 6 name] — [DATA_NEEDED: pin 6 description] |
| 引脚 7 | [DATA_NEEDED: pin 7 name] — [DATA_NEEDED: pin 7 description] |
| 引脚 8 | [DATA_NEEDED: pin 8 name] — [DATA_NEEDED: pin 8 description] |
典型应用
LM567CMX 适用于 6 应用s: Telephone and telecom tone signaling, Remote-control command detection, Industrial equipment control interfaces, Audio control and alarm signaling, Wireless control and security receivers, Instrumentation and test-equipment trigger circuits.
Telephone and telecom tone signaling
The LM567CMX is suitable for fixed-frequency tone recognition in telephone and telecommunications signaling circuits. Its I and Q detector architecture provides a hardware indication when the incoming signal falls within the decoder passband, while the saturated transistor output offers a direct interface to control logic. Operating from 4.75 V to 9 V with approximately 12 mA supply current makes it practical for compact line-powered or regulated signaling modules. The design must configure the timing components for the intended tone, verify capture behavior across input amplitude and frequency tolerance, and provide clean supply bypassing near the 8-pin SOIC.
推荐
Remote-control command detection
The LM567CMX can decode a predetermined command tone in audio-frequency remote-control receivers without requiring a host processor to measure frequency continuously. The transistor output changes state when a valid tone is captured, allowing the receiver to trigger a relay, latch an action, or notify another controller. Its 8-pin SOIC footprint supports compact surface-mount assemblies, and the 0 °C to 70 °C commercial range suits room-temperature products. Engineers should allow sufficient signal level at the decoder input, tune the loop for the intended center frequency and bandwidth, and validate false-trigger behavior under noise and neighboring-carrier conditions.
推荐
Industrial equipment control interfaces
A tone-coded interface can use the LM567CMX to recognize a command at a remote panel before allowing machinery or a peripheral to change state. The dedicated detector reduces microcontroller workload and provides a direct hardware decision, while the saturated output transistor can drive a suitable interface stage. The 4.75 V to 9 V supply range supports conventional industrial control rails, and the 8-pin SOIC package simplifies mixed analog and logic layouts. For installations outside the 0 °C to 70 °C range, select a suitably qualified exact orderable and verify signal levels, isolation boundaries, output current, and fail-safe behavior.
推荐
Audio control and alarm signaling
The LM567CMX can serve as the tone-recognition element in audio consoles, alarm panels, paging systems, and intercom accessories. Its function is to indicate the presence of a selected frequency rather than reproduce or decode a full digital audio stream, making it appropriate for simple alert and control tones. The narrow SOIC package preserves board area, and the specified 12 mA supply current is manageable for a small analog front end. Layout should keep the tone network physically stable, reference a low-noise supply, and include filtering appropriate to the audio bandwidth so unintended frequencies do not trigger the output.
推荐
Wireless control and security receivers
A wireless receiver can use the LM567CMX as a simple frequency-selective command detector after its RF or audio-frequency output has been converted to a suitable tone. The decoder then provides a hardwired enable or acknowledgement signal to the system controller, reducing the amount of real-time frequency analysis required. The 8-pin SOIC package and 4.75 V to 9 V operating range suit compact receiver modules. The implementation should use the manufacturer's recommended timing network, verify capture bandwidth against transmitter tolerance, and test the receiver against out-of-band tones, noise, adjacent channels, and repeated power-up transients.
推荐
Instrumentation and test-equipment trigger circuits
The LM567CMX can trigger an instrument or data-acquisition system when a known calibration or synchronization tone appears. This provides a simple hardware event independent of the main measurement controller, which can be useful in repetitive test sequences, interface signaling, and bench equipment. The commercial 0 °C to 70 °C specification and narrow 8-pin SOIC package fit ordinary indoor instrumentation. Layout must account for the 1.10 W listed power parameter rather than assuming unrestricted dissipation, and engineers should verify trigger thresholds, timing accuracy, output polarity, and behavior when multiple tones are present simultaneously.
推荐
推荐产品汇总
工程参考数据: LM567CMX ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | LM567CMX/NOPB | LM567CM/NOPB | LMC567CMX |
|---|---|---|---|---|
| Package | 8-pin SOIC narrow | 8-SOIC | 8-SOIC tone-decoder package | 8-terminal SOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | National Semiconductor |
| Function | General-purpose tone decoder | Tone decoder | Tone decoder | Tone decoder circuit |
关键差异点
- Dedicated hardware tone recognition (对比 Microcontroller-based tone detector)
- Direct same-package sourcing option (对比 LM567CMX/NOPB)
- Compact eight-pin implementation (对比 LMC567CMX)
设计说明
Place the LM567CMX close to the tone-network components and keep the associated timing and loop components on the same analog section of the PCB. Route the detector input away from switching nodes and high-current return paths, and place the supply bypass capacitor adjacent to the device's supply and ground pins. This separation reduces sensitivity to board-level coupling that could shift capture behavior or produce false detections.
Design the supply for the listed 4.75 V to 9 V operating range and approximately 12 mA supply current. Use a regulator with suitable tolerance and transient response, and confirm the output-switching load separately because the saturated transistor sinks current to ground. Do not treat the listed 1.10 W power value as a design target; use the manufacturer thermal limits and the board's copper area when checking worst-case dissipation.
Verify center frequency, capture bandwidth, and output behavior at the intended input amplitude rather than relying only on a nominal oscillator calculation. Check that neighboring or out-of-band tones do not trigger the decoder, and test repeated power-up and input-overdrive conditions. When substituting an ordering code, confirm the exact pinout, supply limits, temperature grade, and suffix-specific documentation instead of treating the SOIC footprint alone as proof of compatibility.
合规信息
The verified technical listing states that LM567CMX has a lead-free status of Contains Lead. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals status are not stated in the retrieved product information.