LMQ66420MC3RXBRQ1 - 36V 2A Low-EMI Automotive Buck | TI
부품 번호: LMQ66420MC3RXBRQ1 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
| 3,000 | $0 | $0.00 |
LMQ66420MC3RXBRQ1 개요
A synchronous step-down converter (buck regulator) is a DC-DC switch-mode converter that steps down a higher input voltage to a lower output voltage using high-side and low-side MOSFET switches. In the power management IC hierarchy, a synchronous buck converter is a key building block in power management units for automotive processors, FPGAs, and MCUs. It provides higher efficiency than LDOs when the input-to-output differential is large, at the cost of switching noise. This converter's ZEN 2 technology targets ultra-low EMI for noise-sensitive automotive systems.
Key features of the LMQ66420MC3RXBRQ1 include 1.5µA quiescent current, integrated VIN bypass and bootstrap capacitors, MODE/SYNC pin for frequency adjustment and synchronization, AEC-Q100 qualification, and a -40°C to 150°C operating temperature range. The low EMI ZEN 2 architecture reduces the need for external filtering and shielding. The 14-pin VQFN-FCRLF (RXB) package supports compact layouts for camera modules and ADAS sensors.
The device is built as an ultra-small synchronous automotive step-down converter. The MODE/SYNC pin can set the frequency or synchronize it to avoid noise-sensitive frequency bands, an important feature for EMI-sensitive applications. NC pins between critical high-voltage pins reduce potential failures and improve pin FMEA, according to TI product information.
This converter is ideal for automotive ADAS domain controllers, infotainment systems, gateways, telematics units, camera module power, industrial 24V distributed power, and processor core rails. It efficiently powers SoCs, FPGAs and MCUs from a 12V or 24V bus.
Designers should follow TI's layout guidance for low-EMI buck converters: place the input capacitor near the VIN pin, use the exposed thermal pad, and select a shielded inductor sized for 2A output. The integrated VIN bypass capacitor reduces high-frequency loop inductance but does not replace the required external bulk input capacitance.
드롭인 대체품: LMQ66420MC3RXBRQ1 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: LMQ66420MC3RXBRQ1 (동일 폼 팩터 및 풋프린트) — 차이점: Input Voltage Range, Operating Temperature Range, Package.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
LMQ66420MA3RXBRQ1
✅ 드롭인✓ 재고 있음
$1.82 / 개
데이터시트 보기 →LMQ66420MB3RXBRQ1
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
LMQ66410MC3RXBRQ1
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
LMQ66410MA3RXBRQ1
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
LMQ66430MC3RXBRQ1
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
LMQ66420MC3RXBRQ1 최대 정격 & 전기적 특성
| 기능 | Synchronous buck step-down converter |
| Output Current | 2 A |
| 입력 전압 범위 | 3 V to 36 V |
| Output Voltage Configuration | Positive adjustable (fixed) 1V (3.3V) |
| 대기 전류 | 1.5 µA |
| 출력 수 | 1 |
| 동기 정류 | Yes |
| Integrated VIN Bypass Capacitor | Yes |
| Integrated CBOOT Capacitor | Yes |
| EMI Mitigation | ZEN 2 ultra-low-EMI technology |
| MODE/SYNC Pin | Yes (frequency setting and synchronization) |
| 패키지 | VQFN-FCRLF (RXB) 14 |
| 실장 유형 | Surface Mount |
| 동작 온도 범위 | -40°C to 150°C |
| Automotive Qualification | AEC-Q100 qualified |
| Family | LMQ664x0-Q1 |
LMQ66420MC3RXBRQ1 vqfn-fcrlf (rxb) 14 핀 구성 가이드
LMQ66420MC3RXBRQ1(vqfn-fcrlf (rxb) 14 패키지)의 핀 구성입니다. 이 전력 소자는 게이트, 드레인, 소스 단자를 갖추고 있습니다. 비편향 패키지의 경우 정확한 핀 1 방향과 풋프린트 세부 정보는 제조사 데이터시트를 참조하십시오. 일반적인 응용 분야로는 전원 공급 장치 설계, 모터 구동, 부하 스위칭이 있습니다.
다음에 대한 상세 핀아웃 데이터 없음: LMQ66420MC3RXBRQ1.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
LMQ66420MC3RXBRQ1 적합 용도: 6 애플리케이션s: Automotive ADAS Domain Controller, Automotive Infotainment and Cluster, Automotive Gateway/Telematics, Camera Module Power, Industrial 24V Distributed Power, Processor Core/IO Rails in Safety Controllers.
Automotive ADAS Domain Controller
The LMQ66420MC3RXBRQ1 efficiently steps down the 12V automotive battery to a clean 3.3V or 1V rail for ADAS SoCs. Its 36V input rating handles load-dump transients, while 2A output supports MCU/IO and sensor aggregation. The ZEN 2 low-EMI architecture and MODE/SYNC are critical for meeting CISPR 25 requirements in camera and radar compute modules. Using integrated VIN bypass and CBOOT capacitors minimizes PCB area and parasitic inductance. For processor power sequencing, pair with TDA4VL21HGAALZRQ1 and an LP87725-Q1 PMIC for multi-rail support.
추천
Automotive Infotainment and Cluster
Infotainment systems demand low ripple and low EMI for audio/video SoCs. The LMQ66420MC3RXBRQ1 provides up to 2A at 3.3V from a 12V bus, reducing beat frequencies with programmable switching frequency via MODE/SYNC. The synchronous design achieves high efficiency, reducing thermal load inside the cabin. Integrated CBOOT capacitor simplifies layout. This converter can power display interfaces and audio codecs while an LP87725-Q1 supervises the rail. Its AEC-Q100 qualification suits head-unit and cluster applications with extended temperature range.
추천
Automotive Gateway/Telematics
Always-on telematics units benefit from the 1.5µA quiescent current of the LMQ66420MC3RXBRQ1, enabling low-power standby in vehicles. The 3V to 36V input range covers cold-crank and load-dump events. The 2A output can power a gateway MCU such as AM62A1-Q1 and communication interfaces. The low-EMI ZEN 2 converter helps pass module-level emissions tests. Integrated capacitors save space in compact telematics enclosures. Pair with TPS65036x-Q1 for additional managed power rails.
추천
Camera Module Power
Surround-view cameras require small, low-noise power solutions in constrained housings. The LMQ66420MC3RXBRQ1's 14-pin VQFN-FCRLF package and integrated VIN bypass and CBOOT capacitors reduce the external component footprint. With 2A output and fixed 3.3V option, it can supply the imager, serializer, and signal conditioner. Its 36V input tolerance simplifies connection to battery or module pre-regulator. The ultra-low EMI characteristic reduces interference with image sensor clocking. It complements image processors and is suitable for automotive camera modules.
추천
Industrial 24V Distributed Power
In industrial robotics and factory controllers, 24V bus rails may see transients up to 36V. The LMQ66420MC3RXBRQ1 accepts 3V to 36V and provides 2A at 1V/3.3V for MCUs, FPGAs, and I/O. The synchronous architecture gives high efficiency, reducing heatsink requirements in sealed enclosures. The MODE/SYNC pin allows synchronizing multiple converters to a single clock, simplifying EMI compliance. Use with TMS320F280037C-Q1 or similar MCUs in PLC and motor-control I/O boards.
추천
Processor Core/IO Rails in Safety Controllers
Safety-critical automotive controllers require predictable power delivery. The LMQ66420MC3RXBRQ1 can power the core or I/O rail of a real-time MCU like TMS320F28P650SH-Q1 from a 12V supply. The integrated VIN bypass and CBOOT capacitors reduce switching-loop parasitics, improving output voltage transient response. The 2A rating is sufficient for MCU plus peripheral loads, while the low quiescent current supports sleep modes. AEC-Q100 qualification and pin FMEA design aid functional safety implementations; combine with a system basis chip for monitoring.
추천
추천 제품 요약
엔지니어링 참조 데이터: LMQ66420MC3RXBRQ1 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | LMQ66420MA3RXBRQ1 | LMQ66420MB3RXBRQ1 | LMQ66410MC3RXBRQ1 | LMQ66430MC3RXBRQ1 |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | VQFN-FCRLF (RXB) 14 | VQFN-FCRLF (RXB) 14 - same | VQFN-FCRLF (RXB) 14 - same | VQFN-FCRLF (RXB) 14 - same | VQFN-FCRLF (RXB) 14 - same |
| Output Current | 2 A | 2 A | 2 A | 1 A | 3 A |
| Input Voltage Range | 3V to 36V | 3V to 36V | 3V to 36V | 3V to 36V | 3V to 36V |
| Quiescent Current | 1.5 µA | 1.5 µA | 1.5 µA | 1.5 µA | 1.5 µA |
| Integrated VIN Bypass/CBOOT Capacitors | Yes | Yes | Yes | Yes | Yes |
| ZEN 2 Low-EMI Technology | Yes | Yes | Yes | Yes | Yes |
| Automotive Qualification | AEC-Q100 | AEC-Q100 | AEC-Q100 | AEC-Q100 | AEC-Q100 |
주요 차별점
- 2A output current in a compact 14-pin VQFN-FCRLF package with integrated capacitors (vs LMQ66410MC3RXBRQ1)
- 1.5µA quiescent current for always-on automotive loads (vs LMQ66430MC3RXBRQ1)
- ZEN 2 ultra-low-EMI technology with integrated bypass/boost capacitors (vs LMQ66420MA3RXBRQ1)
설계 노트
Place a 10µF ceramic input capacitor as close to the VIN pin as possible. The LMQ66420MC3RXBRQ1 integrates the VIN bypass and CBOOT capacitors, but the external input capacitor is still required for stability and ripple reduction. Add multiple vias to the exposed thermal pad and keep the high-frequency switching loop (VIN-SW-GND) small to realize ZEN 2 low-EMI benefits.
Use the MODE/SYNC pin to set the switching frequency or synchronize it to an external clock, avoiding noise-sensitive frequency bands in automotive systems. The ZEN 2 architecture already reduces EMI, but with a 2A buck converter, select a shielded inductor and minimize the output trace loop area to keep conducted and radiated emissions low.
At 2A output, the LMQ66420MC3RXBRQ1's power loss depends on input/output differential and switching frequency. For junction temperatures up to 150°C in automotive environments, provide a sufficient copper area connected to the VQFN-FCRLF exposed pad. Use thermal vias to an internal ground plane and calculate junction temperature using the device's thermal metrics before final layout.
규정 준수 정보
Automotive AEC-Q100 qualified per TI product page. RoHS/REACH/lead-free status not explicitly listed in the provided web data and should be confirmed from the latest TI datasheet and packing information.
