LPC18S37JBD144E - 180MHz Cortex-M3 MCU | NXP
부품 번호: LPC18S37JBD144E ✓ 활성LPC18S37JBD144E 개요
A microcontroller is a programmable system-on-chip used to execute firmware, coordinate peripherals, and manage digital control or communication tasks. The Cortex-M3 MCU belongs to the ARM Cortex-M family, which combines a compact processor core with deterministic interrupt handling. The LPC18S37JBD144E extends that processor architecture with substantial flash and SRAM, plus dedicated connectivity and hardware-security resources for industrial, networking, and USB-equipped equipment.
The device provides 1 MB of flash organized as 1M by 8 bits for firmware and nonvolatile data. Its 136 kB SRAM supports working memory, protocol stacks, Ethernet frames, USB buffers, and application state without requiring external memory in many designs. Two high-speed USB interfaces expand the number of direct host or device connections, while integrated Ethernet supports wired network communication.
The AES engine accelerates symmetric encryption operations and reduces the processing burden associated with secure data transfer. The LPC18S37 family also includes EMC-related features intended to improve operation in electrically noisy environments. Together, these resources make the LPC18S37JBD144E suitable for gateways, industrial controllers, USB-to-network equipment, secure embedded controllers, and data-acquisition systems.
The 144-LQFP package exposes a large number of digital and communication functions while supporting conventional surface-mount assembly. Its 20 mm by 20 mm body is larger than compact QFN packages but easier to route visually and assemble where fine-pitch access or inspection is important. The E suffix identifies the specified ordering configuration, while the temperature and packaging details should be confirmed against the manufacturer datasheet before production release.
PCB design should preserve adequate clearance around all 144 leads, route high-speed USB and Ethernet signals with short return paths, and provide the decoupling and grounding arrangement specified by the manufacturer. Ethernet magnetics, USB connectors, and external transceiver requirements depend on the selected board architecture. Firmware should use the applicable device configuration, clock, pin-muxing, and low-power guidance from the manufacturer datasheet rather than assuming compatibility with another MCU family.
This product page organizes the core LPC18S37JBD144E specifications, replacement considerations, package information, and application guidance for faster engineering evaluation. It also identifies the nearest verified same-package NXP option while highlighting where a different peripheral set, memory configuration, or software migration effort must be considered before substitution.
드롭인 대체품: LPC18S37JBD144E — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: LPC18S37JBD144E (동일 폼 팩터 및 풋프린트) — 차이점: Flash Memory, High-Speed USB Interfaces, Package.
LPC1837JBD144E
✅ 드롭인가격 문의
데이터시트 보기 →LPC18S37JBD144E 최대 정격 & 전기적 특성
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Maximum CPU Frequency | 180 MHz |
| Flash Memory | 1 MB (1M x 8 bits) |
| SRAM | 136 kB |
| Ethernet Interface | 1 integrated Ethernet interface |
| High-Speed USB Interfaces | 2 interfaces |
| Hardware Encryption | AES engine |
| EMC Support | Integrated EMC features |
| 패키지 | 144-LQFP (20 mm x 20 mm) |
| 실장 유형 | Surface mount |
| Terminal Finish | Tin |
| Moisture Sensitivity Level | MSL 3 |
| Peak Reflow Temperature | 260 C |
| Maximum Time at Peak Reflow | 30 s |
| JESD-609 Code | e3 |
LPC18S37JBD144E 144-lqfp (20 mm x 20 mm) 핀 구성 가이드
LPC18S37JBD144E(144-lqfp (20 mm x 20 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: LPC18S37JBD144E.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
LPC18S37JBD144E 적합 용도: 6 애플리케이션s: Industrial Ethernet Gateway, USB-to-Ethernet Bridge, Secure USB Device Controller, Industrial Data Acquisition Unit, Network Security Appliance, Connected Equipment Controller.
Industrial Ethernet Gateway
The LPC18S37JBD144E fits industrial gateways because its 180 MHz Cortex-M3 core can process protocol conversion and control logic while integrated Ethernet manages network communication. Its 1 MB flash and 136 kB SRAM provide room for a substantial firmware image, network stacks, buffers, and configuration data without requiring external memory in many designs. The AES engine supports efficient handling of encrypted network traffic or authenticated device links. Ethernet magnetics, isolation, surge protection, and the appropriate industrial temperature grade must still be confirmed from the manufacturer documentation. Separate high-speed USB interfaces can support local service ports, configuration connections, or expansion devices without a separate host controller.
추천
USB-to-Ethernet Bridge
The LPC18S37JBD144E is well suited to a USB-to-Ethernet bridge because it combines two high-speed USB interfaces, Ethernet, a 180 MHz ARM Cortex-M3 processor, and an AES engine in one device. The processor can translate traffic, maintain protocol buffers, and provide device management while the 136 kB SRAM handles working memory and packet data. The 1 MB flash is sufficient for embedded firmware, interface configuration, and security routines. Designers must implement the required USB and Ethernet physical layers, select suitable magnetics, and validate protocol latency, throughput, power consumption, and connector protections against the target product requirements.
추천
Secure USB Device Controller
The LPC18S37JBD144E can serve as the central controller in a secure USB peripheral because two high-speed USB interfaces support device, host, or dual-role connectivity and the AES engine accelerates supported encryption operations. The 180 MHz Cortex-M3 core can manage protocol handling, policy enforcement, key access, logging, and a user interface, while 1 MB of flash and 136 kB of SRAM reduce reliance on external components. Secure firmware design still requires protected key storage, authenticated updates, correct certificate handling, physical attack considerations, and validation of USB compliance for the selected device role and product configuration.
추천
Industrial Data Acquisition Unit
The LPC18S37JBD144E supports compact industrial data-acquisition equipment that must sample, preprocess, and transmit measurements. Its 180 MHz Cortex-M3 core provides deterministic processing for control filtering, sensor conditioning supervision, and protocol handling, while 136 kB of SRAM accommodates buffers and the 1 MB flash holds application code and calibration parameters. Ethernet supports networked transfer to supervisory systems, and the two USB interfaces can connect maintenance equipment or local storage. The actual analog front end, isolation, sensor interfaces, ADC requirements, and protection network are determined by the measured signals and environmental conditions.
추천
Network Security Appliance
The LPC18S37JBD144E can form the control and secure-connectivity core of a small network-security appliance because Ethernet, an AES engine, and a high-performance Cortex-M3 core are integrated in one device. Firmware can maintain sessions, enforce access policies, collect events, authenticate management clients, and support secure provisioning while using the 136 kB SRAM for protocol state and packet buffers. The 1 MB flash provides internal code and configuration storage. A production design must still address secure boot, key lifecycle management, side-channel considerations, update mechanisms, physical tamper response, and the exact performance requirements of the traffic-processing architecture.
추천
Connected Equipment Controller
The LPC18S37JBD144E works as a general connected-equipment controller when a product needs local real-time control plus wired and USB connectivity. The 180 MHz Cortex-M3 processor can execute motion, sequencing, user-interface, or sensor-control logic, while Ethernet provides backbone communication and the two USB interfaces support local accessories. Memory resources of 1 MB flash and 136 kB SRAM allow consolidation of multiple control tasks into one microcontroller, reducing component count. Final qualification requires checking the electrical limits, temperature grade, pin multiplexing, clocking, peripheral availability, and software configuration for the intended production board.
추천
추천 제품 요약
엔지니어링 참조 데이터: LPC18S37JBD144E — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | LPC1837JBD144E |
|---|---|---|
| Package | 144-LQFP (20 mm x 20 mm) | 144-LQFP (20 mm x 20 mm) |
| Brand | NXP Semiconductors | NXP Semiconductors |
| Processor Core | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum CPU Frequency | 180 MHz | 180 MHz |
주요 차별점
- Provides a fully specified connectivity and security feature set in the LPC18S37JBD144E product listing (vs LPC1837JBD144E)
- Combines a 180 MHz Cortex-M3 core with substantial local memory (vs LPC1837JBD144E)
- Matches the alternative's package outline for potential board-space reuse (vs LPC1837JBD144E)
설계 노트
Create the LQFP footprint from the manufacturer's 144-pin package drawing rather than relying on a generic 144-lead library item. Confirm the 20 mm body dimension, lead span, pitch, toe geometry, solder-mask pattern, paste apertures, and assembly clearances. A footprint error can affect solderability even when the logical pin assignment is correct, so compare the physical library model against the land pattern shown in the manufacturer documentation.
Route high-speed USB and Ethernet connections as controlled-impedance nets with short paths and continuous ground references. Avoid placing these routes beside switching power inductors or high-current edges unless the reference layout explicitly permits it. Keep the device's decoupling capacitors close to the associated supply pins, provide a low-impedance ground plane, and follow the manufacturer guidance for analog and digital partitioning. Validate USB and Ethernet signal integrity with the final stackup and enclosure.
Decouple each required supply rail separately according to the manufacturer pin table and recommended application circuit. Check the exact operating-voltage limits, current requirements, power sequencing, and analog-supply recommendations for the LPC18S37JBD144E before assigning rails. Do not infer USB, Ethernet, or transceiver supply requirements from the processor frequency; use the device datasheet and the external interface components' constraints to design startup, shutdown, and fault behavior.
Do not treat the shared 144-LQFP package of the LPC1837JBD144E and LPC18S37JBD144E as proof of functional equivalence. The LPC18S37JBD144E specifically combines 136 kB SRAM, Ethernet, two high-speed USB interfaces, EMC features, and an AES engine. Review pin multiplexing, peripheral availability, clocks, interrupts, memory sizes, startup behavior, and existing firmware dependencies before approving either part as a substitute.
규정 준수 정보
The component is described as tin-finished with MSL 3 and JESD-609 code e3. RoHS, REACH, halogen-free, lead-free, and conflict-minerals declarations were not established.