LPC18S37JBD144E - 180MHz Cortex-M3 MCU | NXP
MPN: LPC18S37JBD144E ✓ 啟用中LPC18S37JBD144E 概覽
A microcontroller is a programmable system-on-chip used to execute firmware, coordinate peripherals, and manage digital control or communication tasks. The Cortex-M3 MCU belongs to the ARM Cortex-M family, which combines a compact processor core with deterministic interrupt handling. The LPC18S37JBD144E extends that processor architecture with substantial flash and SRAM, plus dedicated connectivity and hardware-security resources for industrial, networking, and USB-equipped equipment.
The device provides 1 MB of flash organized as 1M by 8 bits for firmware and nonvolatile data. Its 136 kB SRAM supports working memory, protocol stacks, Ethernet frames, USB buffers, and application state without requiring external memory in many designs. Two high-speed USB interfaces expand the number of direct host or device connections, while integrated Ethernet supports wired network communication.
The AES engine accelerates symmetric encryption operations and reduces the processing burden associated with secure data transfer. The LPC18S37 family also includes EMC-related features intended to improve operation in electrically noisy environments. Together, these resources make the LPC18S37JBD144E suitable for gateways, industrial controllers, USB-to-network equipment, secure embedded controllers, and data-acquisition systems.
The 144-LQFP package exposes a large number of digital and communication functions while supporting conventional surface-mount assembly. Its 20 mm by 20 mm body is larger than compact QFN packages but easier to route visually and assemble where fine-pitch access or inspection is important. The E suffix identifies the specified ordering configuration, while the temperature and packaging details should be confirmed against the manufacturer datasheet before production release.
PCB design should preserve adequate clearance around all 144 leads, route high-speed USB and Ethernet signals with short return paths, and provide the decoupling and grounding arrangement specified by the manufacturer. Ethernet magnetics, USB connectors, and external transceiver requirements depend on the selected board architecture. Firmware should use the applicable device configuration, clock, pin-muxing, and low-power guidance from the manufacturer datasheet rather than assuming compatibility with another MCU family.
This product page organizes the core LPC18S37JBD144E specifications, replacement considerations, package information, and application guidance for faster engineering evaluation. It also identifies the nearest verified same-package NXP option while highlighting where a different peripheral set, memory configuration, or software migration effort must be considered before substitution.
直接替換替代品,適用於 LPC18S37JBD144E — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LPC18S37JBD144E (相同外形與佔位) — 差異在於 Flash Memory, High-Speed USB Interfaces, Package.
LPC1837JBD144E
✅ 直接替換聯絡詢價
查看資料表 →LPC18S37JBD144E 最大額定值與電氣特性
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Maximum CPU Frequency | 180 MHz |
| Flash Memory | 1 MB (1M x 8 bits) |
| SRAM | 136 kB |
| Ethernet Interface | 1 integrated Ethernet interface |
| High-Speed USB Interfaces | 2 interfaces |
| Hardware Encryption | AES engine |
| EMC Support | Integrated EMC features |
| 封裝 | 144-LQFP (20 mm x 20 mm) |
| 安裝類型 | Surface mount |
| Terminal Finish | Tin |
| Moisture Sensitivity Level | MSL 3 |
| Peak Reflow Temperature | 260 C |
| Maximum Time at Peak Reflow | 30 s |
| JESD-609 Code | e3 |
LPC18S37JBD144E 144-lqfp (20 mm x 20 mm) 腳位配置指南
LPC18S37JBD144E(144-lqfp (20 mm x 20 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: LPC18S37JBD144E.
請參閱 資料表 以查看完整腳位配置。
典型應用
LPC18S37JBD144E 適用於 6 應用s: Industrial Ethernet Gateway, USB-to-Ethernet Bridge, Secure USB Device Controller, Industrial Data Acquisition Unit, Network Security Appliance, Connected Equipment Controller.
Industrial Ethernet Gateway
The LPC18S37JBD144E fits industrial gateways because its 180 MHz Cortex-M3 core can process protocol conversion and control logic while integrated Ethernet manages network communication. Its 1 MB flash and 136 kB SRAM provide room for a substantial firmware image, network stacks, buffers, and configuration data without requiring external memory in many designs. The AES engine supports efficient handling of encrypted network traffic or authenticated device links. Ethernet magnetics, isolation, surge protection, and the appropriate industrial temperature grade must still be confirmed from the manufacturer documentation. Separate high-speed USB interfaces can support local service ports, configuration connections, or expansion devices without a separate host controller.
推薦
USB-to-Ethernet Bridge
The LPC18S37JBD144E is well suited to a USB-to-Ethernet bridge because it combines two high-speed USB interfaces, Ethernet, a 180 MHz ARM Cortex-M3 processor, and an AES engine in one device. The processor can translate traffic, maintain protocol buffers, and provide device management while the 136 kB SRAM handles working memory and packet data. The 1 MB flash is sufficient for embedded firmware, interface configuration, and security routines. Designers must implement the required USB and Ethernet physical layers, select suitable magnetics, and validate protocol latency, throughput, power consumption, and connector protections against the target product requirements.
推薦
Secure USB Device Controller
The LPC18S37JBD144E can serve as the central controller in a secure USB peripheral because two high-speed USB interfaces support device, host, or dual-role connectivity and the AES engine accelerates supported encryption operations. The 180 MHz Cortex-M3 core can manage protocol handling, policy enforcement, key access, logging, and a user interface, while 1 MB of flash and 136 kB of SRAM reduce reliance on external components. Secure firmware design still requires protected key storage, authenticated updates, correct certificate handling, physical attack considerations, and validation of USB compliance for the selected device role and product configuration.
推薦
Industrial Data Acquisition Unit
The LPC18S37JBD144E supports compact industrial data-acquisition equipment that must sample, preprocess, and transmit measurements. Its 180 MHz Cortex-M3 core provides deterministic processing for control filtering, sensor conditioning supervision, and protocol handling, while 136 kB of SRAM accommodates buffers and the 1 MB flash holds application code and calibration parameters. Ethernet supports networked transfer to supervisory systems, and the two USB interfaces can connect maintenance equipment or local storage. The actual analog front end, isolation, sensor interfaces, ADC requirements, and protection network are determined by the measured signals and environmental conditions.
推薦
Network Security Appliance
The LPC18S37JBD144E can form the control and secure-connectivity core of a small network-security appliance because Ethernet, an AES engine, and a high-performance Cortex-M3 core are integrated in one device. Firmware can maintain sessions, enforce access policies, collect events, authenticate management clients, and support secure provisioning while using the 136 kB SRAM for protocol state and packet buffers. The 1 MB flash provides internal code and configuration storage. A production design must still address secure boot, key lifecycle management, side-channel considerations, update mechanisms, physical tamper response, and the exact performance requirements of the traffic-processing architecture.
推薦
Connected Equipment Controller
The LPC18S37JBD144E works as a general connected-equipment controller when a product needs local real-time control plus wired and USB connectivity. The 180 MHz Cortex-M3 processor can execute motion, sequencing, user-interface, or sensor-control logic, while Ethernet provides backbone communication and the two USB interfaces support local accessories. Memory resources of 1 MB flash and 136 kB SRAM allow consolidation of multiple control tasks into one microcontroller, reducing component count. Final qualification requires checking the electrical limits, temperature grade, pin multiplexing, clocking, peripheral availability, and software configuration for the intended production board.
推薦
推薦產品摘要
工程參考資料,適用於 LPC18S37JBD144E — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LPC1837JBD144E |
|---|---|---|
| Package | 144-LQFP (20 mm x 20 mm) | 144-LQFP (20 mm x 20 mm) |
| Brand | NXP Semiconductors | NXP Semiconductors |
| Processor Core | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum CPU Frequency | 180 MHz | 180 MHz |
主要差異化特點
- Provides a fully specified connectivity and security feature set in the LPC18S37JBD144E product listing (對比LPC1837JBD144E)
- Combines a 180 MHz Cortex-M3 core with substantial local memory (對比LPC1837JBD144E)
- Matches the alternative's package outline for potential board-space reuse (對比LPC1837JBD144E)
設計說明
Create the LQFP footprint from the manufacturer's 144-pin package drawing rather than relying on a generic 144-lead library item. Confirm the 20 mm body dimension, lead span, pitch, toe geometry, solder-mask pattern, paste apertures, and assembly clearances. A footprint error can affect solderability even when the logical pin assignment is correct, so compare the physical library model against the land pattern shown in the manufacturer documentation.
Route high-speed USB and Ethernet connections as controlled-impedance nets with short paths and continuous ground references. Avoid placing these routes beside switching power inductors or high-current edges unless the reference layout explicitly permits it. Keep the device's decoupling capacitors close to the associated supply pins, provide a low-impedance ground plane, and follow the manufacturer guidance for analog and digital partitioning. Validate USB and Ethernet signal integrity with the final stackup and enclosure.
Decouple each required supply rail separately according to the manufacturer pin table and recommended application circuit. Check the exact operating-voltage limits, current requirements, power sequencing, and analog-supply recommendations for the LPC18S37JBD144E before assigning rails. Do not infer USB, Ethernet, or transceiver supply requirements from the processor frequency; use the device datasheet and the external interface components' constraints to design startup, shutdown, and fault behavior.
Do not treat the shared 144-LQFP package of the LPC1837JBD144E and LPC18S37JBD144E as proof of functional equivalence. The LPC18S37JBD144E specifically combines 136 kB SRAM, Ethernet, two high-speed USB interfaces, EMC features, and an AES engine. Review pin multiplexing, peripheral availability, clocks, interrupts, memory sizes, startup behavior, and existing firmware dependencies before approving either part as a substitute.
合規資訊
The component is described as tin-finished with MSL 3 and JESD-609 code e3. RoHS, REACH, halogen-free, lead-free, and conflict-minerals declarations were not established.