LPC43S67JET256E - 204MHz Dual-Core 1MB MCU | NXP
부품 번호: LPC43S67JET256E ✓ 활성LPC43S67JET256E 개요
A microcontroller is a programmable semiconductor that integrates a processor core, memory, communication interfaces, timers, and other peripherals into one component. The LPC43S6x family belongs to the Arm Cortex-M microcontroller hierarchy and combines high-performance control processing with an independent Cortex-M0 subsystem. This architecture can reduce interrupt-related overhead in communication-heavy embedded systems while retaining a broad set of configurable peripherals.
Key features include a maximum core frequency of 204 MHz, flash storage organized as 1 MB of 1M x 8, and 154 kB of SRAM. The platform supports Ethernet, two high-speed USB interfaces, LCD connectivity, an EMC cryptographic engine, and AES functionality according to the manufacturer product information. Configurable SCTimer/PWM blocks and serial general-purpose I/O support deterministic timing and peripheral interconnection, while SPIFI expands the available external storage interface.
The dual-core architecture separates the principal Cortex-M4 execution role from Cortex-M0-based peripheral management. This can help designers partition network handling, control logic, and real-time I/O tasks more predictably than a single-core implementation. Memory capacity of up to 1 MB supports a larger embedded code and data footprint, while 154 kB of SRAM provides working space for protocol stacks, buffers, graphics, and application state. The package is a compact 256-LBGA intended for high-density embedded assemblies.
Typical uses include industrial Ethernet controllers, connected industrial equipment, high-speed USB peripherals, human-machine interfaces with LCD support, secure embedded gateways, and communications equipment requiring substantial flash and SRAM. The Ethernet and USB capabilities also make the device suitable for protocol bridges, data acquisition systems, and embedded network interfaces that need more computation than a basic low-end microcontroller provides.
Board design must account for the 17 x 17 mm BGA footprint, ball pitch, power-supply sequencing, decoupling, and programming access. Pin multiplexing and peripheral allocation should be checked against the manufacturer's reference manual before assigning signals. The independent Cortex-M0 subsystem also requires deliberate firmware partitioning to prevent peripheral servicing conflicts with the main application.
This product page organizes the LPC43S67JET256E core specifications, sourcing options, application guidance, and verified drop-in alternatives. It also highlights package, memory, communications, and software-design considerations that help engineers evaluate the MCU before beginning PCB layout and firmware integration.
드롭인 대체품: LPC43S67JET256E — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
LPC43S67JET256
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LPC43S67JET256E 최대 정격 & 전기적 특성
| Product Type | 32-bit dual-core microcontroller |
| Main Processor Core | Arm Cortex-M4 |
| Secondary Processor Core | Arm Cortex-M0 coprocessor and Cortex-M0 peripheral subsystem |
| Maximum Processor Frequency | 204 MHz |
| Flash Memory | Up to 1 MB (1M x 8) |
| On-Chip SRAM | Up to 154 kB |
| EEPROM Memory | 16 kB |
| External Flash Interface | Quad SPI Flash Interface (SPIFI) |
| Ethernet Support | Supported |
| High-Speed USB Interfaces | 2 interfaces |
| LCD Connectivity | Supported |
| Cryptographic Hardware | EMC cryptographic engine and AES engine |
| Timer and PWM Support | Configurable SCTimer/PWM peripherals |
| 패키지 | 256-LBGA (17 x 17 mm) |
| 실장 유형 | Surface mount |
LPC43S67JET256E 256-lbga (17 x 17 mm) 핀 구성 가이드
LPC43S67JET256E(256-lbga (17 x 17 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: LPC43S67JET256E.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
LPC43S67JET256E 적합 용도: 6 애플리케이션s: Industrial Ethernet Control, High-Speed USB Peripherals, LCD Human-Machine Interfaces, Secure Communications Gateways, Data Acquisition Systems, Embedded External Flash Storage.
Industrial Ethernet Control
The LPC43S67JET256E fits industrial Ethernet control equipment because it combines Ethernet support with a 204 MHz Arm Cortex-M4 core and dedicated Cortex-M0 peripheral-management resources. The main processor can execute control logic and communications services while the secondary subsystem handles time-sensitive peripheral tasks. Up to 1 MB of flash accommodates a network stack and application firmware, while 154 kB of SRAM supports protocol buffers. The 256-LBGA package saves board area but requires careful escape routing and assembly planning.
High-Speed USB Peripherals
The LPC43S67JET256E is suitable for high-speed USB peripheral designs that require more memory and processing capability than a compact low-power MCU provides. Its two high-speed USB interfaces can support multiple USB functions or separate host and device workloads, depending on the final peripheral configuration. The 1 MB flash capacity is valuable for firmware, descriptors, and protocol code, while the Cortex-M4 core can manage data movement between USB and application buffers.
LCD Human-Machine Interfaces
The LPC43S67JET256E can serve as the controller for an LCD-based human-machine interface because NXP identifies LCD connectivity among the device features. The 204 MHz Cortex-M4 processor provides capacity for graphics updates, input handling, and supervisory logic, while the Cortex-M0 subsystem can manage peripheral traffic independently. Its 154 kB of SRAM and up to 1 MB of flash support display buffers, local data, and firmware for industrial panels, access terminals, and compact control consoles.
Secure Communications Gateways
The LPC43S67JET256E is applicable to secure communications gateways that need Ethernet, USB, and hardware-assisted cryptographic functions. NXP identifies an EMC cryptographic engine and an AES engine, reducing the processing burden associated with supported cryptographic operations. Dual Cortex-M resources provide a practical separation between network workloads and peripheral servicing, while 16 kB of EEPROM can retain configuration values and identity information that should survive power cycling.
Data Acquisition Systems
The LPC43S67JET256E suits data-acquisition equipment that must coordinate communications, timers, and configurable digital peripherals. Its SCTimer/PWM resources support precise timing and motor or sampling-control functions, while Ethernet and high-speed USB provide paths for transferring collected data. The Cortex-M4 core can process application algorithms, the Cortex-M0 subsystem can service peripherals, and the 154 kB SRAM can buffer samples before network or host transmission.
Embedded External Flash Storage
The LPC43S67JET256E can act as a system controller when a design requires both embedded code execution and external nonvolatile storage. Its quad SPI Flash Interface supports the SPIFI peripheral described by NXP, while up to 1 MB of internal flash remains available for firmware and constants. This arrangement is useful in industrial controllers and communications equipment that require larger data logs, asset storage, or firmware images without changing the main processor.
엔지니어링 참조 데이터: LPC43S67JET256E — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | LPC43S67JET256 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Package | 256-LBGA (17 x 17 mm) | 256-LBGA (17 x 17 mm) |
| Main Processor Core | Arm Cortex-M4 | Arm Cortex-M4 |
| Secondary Processor | Arm Cortex-M0 coprocessor and peripheral subsystem | Arm Cortex-M0 coprocessor and peripheral subsystem |
| Maximum Frequency | 204 MHz | 204 MHz |
| Flash Memory | Up to 1 MB (1M x 8) | Up to 1 MB (1M x 8) |
| On-Chip SRAM | Up to 154 kB | Up to 154 kB |
| EEPROM | 16 kB | 16 kB |
| External Flash Interface | Quad SPI Flash Interface (SPIFI) | Quad SPI Flash Interface (SPIFI) |
| High-Speed USB Interfaces | 2 interfaces | 2 interfaces |
주요 차별점
- Higher Cortex-M4 clock rating (vs LPC43S67JET256)
- Dedicated Cortex-M0 peripheral-management resources (vs LPC43S67JET256)
- Integrated communication and security hardware (vs LPC43S67JET256)
- Large integrated memory configuration (vs LPC43S67JET256)
설계 노트
Treat the 256-LBGA as a high-density assembly rather than a conventional leaded package. Route all ball escapes on layers permitted by the selected PCB stack-up, preserve uninterrupted ground-reference planes beneath the device where the package drawing permits, and use the manufacturer's land pattern and ball map during footprint creation. Validate escape-line width and spacing with the PCB fabricator because 17 x 17 mm BGA assembly can magnify manufacturing yield and inspection risks.
Assign and decouple every required core, I/O, analog, and peripheral supply rail separately. Place the smallest high-frequency bypass capacitors directly at the associated BGA power and ground balls, then add bulk capacitance near the regulator according to the reference circuit. Check the datasheet's supply sequencing, voltage limits, startup, and power-consumption conditions before combining the Cortex-M4 and Cortex-M0 subsystems.
Plan clock, Ethernet, USB, and external SPIFI connections as controlled-impedance interfaces. Keep switching nodes and high-current return paths away from sensitive input pins, use continuous ground references below routed communication lanes, and follow the manufacturer reference layout for decoupling and interface routing. Maintain practical clearances between antenna or external signal areas and the MCU's supply network to reduce coupled noise.
Do not treat a Cortex-M4 device with a similar BGA body as a drop-in substitute without verifying the complete ball map, supply rails, boot configuration, debug interface, peripheral multiplexing, and package tolerances. Likewise, do not substitute a different LPC43 family member with fewer flash, RAM, Ethernet, USB, or security resources without a firmware and hardware impact review. The confirmed same-family alternative remains the safest starting point for a footprint-compatible redesign.
규정 준수 정보
The manufacturer and distributor snippets do not provide a compliance declaration for this ordering code. Automotive qualification is not indicated, so AEC-Q100 status is treated as not applicable rather than qualified.