Analog Devices

LT1632IS8 - 45MHz, 45V/us Dual RRIO Precision Op Amp | ADI

부품 번호: LT1632IS8 ✓ 활성
±15 V (30 V total) Vdss 8-pin SO (SOIC-8), 1.75 mm height Package
MOQ: 1 |

LT1632IS8 개요

The Analog Devices LT1632IS8 is a dual, rail-to-rail input and output precision operational amplifier with a 45 MHz gain-bandwidth product and a 45 V/us slew rate, supplied in an 8-pin small-outline (SOIC-8) package. It is the industrial-temperature grade of the LT1632/LT1633 family and is listed by the manufacturer as a PRODUCTION part.

An operational amplifier is a high-gain differential amplifier whose key job is to condition a small voltage difference between its two inputs and deliver a scaled, low-distortion output. A rail-to-rail input stage means the common-mode input range extends to both supply rails, so the amplifier can sense signals that swing from ground to the positive rail; a rail-to-rail output stage means the output can also swing to within a few hundred millivolts of either rail. This dual capability places the LT1632 in the general-purpose amplifier family, above precision instrumentation amplifiers and inside the broader analog signal-chain IC hierarchy.

The headline specifications are a 45 MHz gain-bandwidth product, which sets the small-signal speed ceiling, and a 45 V/us slew rate, which sets the large-signal speed ceiling. Because the two numbers are matched, the LT1632 preserves near-full bandwidth well into the high-gain region, so a 10 V step is reproduced without the extended settling times typical of unity-gain-stable, slew-limited amplifiers. Supply operation reaches plus or minus 15 V, giving a 30 V total span, and the 8-pin SO package keeps the footprint compatible with conventional dual op amp layouts.

Internally the LT1632 is built on a precision, low-noise process with a fully differential input stage and a class-AB output stage that keeps distortion low at low signal levels while still delivering high bandwidth. Rail-to-rail input is achieved without the input-offset degradation typical of simple complementary-bipolar input stages, and the output stage is designed to remain stable into the wide range of capacitive loads encountered in filtering and cable driving. The result is an amplifier that behaves like a precision part in DC terms and like a high-speed part in AC terms.

Typical uses include buffering precision ADC front ends, driving instrumentation and audio DAC input stages, active filters with high slew-rate demand, and low-noise sensor signal conditioning where the full common-mode range of the supply is needed. Two independent channels in one package also reduce board area in multi-axis sensor systems and in stereo or differential signal conditioning paths.

When laying out the board, treat the SOIC-8 footprint of the LT1632IS8 as interchangeable with any standard dual op amp: stable reference pins, decoupling close to the supply pins, and a clean ground return matter more than exotic routing. Because the device is a precision part, verify input common-mode range against the actual rail voltage in single-supply designs before committing to the design.

This page consolidates the manufacturer product data, distributor availability and package details with drop-in alternatives, an application-by-application fit analysis and practical design notes that are not found in a single location in the original datasheet.

드롭인 대체품: LT1632IS8 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

LT1632CS8

✅ 드롭인
📦 8-pin SO (SOIC-8)
Same die, pinout and 45 MHz / 45 V/us performance; temperature grade differs - commercial instead of -40 °C to +85 °C industrial

📋 참조 대체품 (카탈로그에 없음)

LT1632IS8#PBF

✅ 드롭인
📦 8-pin SO (SOIC-8)
Identical electrical design and 8-pin SO footprint; difference is the lead-free order-code marking only - 0 % electrical change

📋 참조 대체품 (카탈로그에 없음)

LT1632IS8#TR

✅ 드롭인
📦 8-pin SO (SOIC-8)
Identical electrical design and 8-pin SO footprint; difference is tape-and-reel order code only - 0 % electrical change

📋 참조 대체품 (카탈로그에 없음)

LT1632IS8 최대 정격 & 전기적 특성

Number of Amplifiers 2 (dual)
Gain-Bandwidth Product 45 MHz
Slew Rate 45 V/us
Input Type Rail-to-Rail Input
출력 유형 Rail-to-Rail Output
Supply Voltage Range ±15 V (30 V total)
패키지 8-pin SO (SOIC-8), 1.75 mm height
핀 수 8
실장 유형 Surface Mount
동작 온도 -40 °C to +85 °C (industrial grade, I suffix)
Production Status PRODUCTION (per manufacturer product page)
AEC-Q100 Qualification Not applicable (industrial-grade analog amplifier)

LT1632IS8 핀 구성

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
핀 1 OUT A — Output of amplifier A
핀 2 -IN A — Inverting input of amplifier A
핀 3 +IN A — Non-inverting input of amplifier A
핀 4 V- — Negative supply pin
핀 5 +IN B — Non-inverting input of amplifier B
핀 6 -IN B — Inverting input of amplifier B
핀 7 OUT B — Output of amplifier B
핀 8 V+ — Positive supply pin

일반적인 애플리케이션

LT1632IS8 적합 용도: 6 애플리케이션s: Precision ADC Signal Conditioning, Active Filter and Equalizer Design, Audio and Instrumentation Signal Paths, Sensor Signal Conditioning, Power Supply Feedback and Control Loops, Test and Measurement Instrumentation.

🔧

Precision ADC Signal Conditioning

The LT1632IS8 sits in front of high-resolution converters as a rail-to-rail input/output buffer and driver. With a 45 MHz gain-bandwidth product and 45 V/us slew rate, it can settle a full-scale step quickly enough that the amplifier does not limit converter acquisition time, while rail-to-rail input accepts sensor signals that swing close to either supply rail. Use it as a unity-gain buffer in front of the converter input, add a small isolation resistor when the ADC presents a large sampling capacitor, and keep the layout short so that 45 MHz of bandwidth does not pick up board noise. The trade-off against a slower general-purpose dual op amp is negligible at low frequency but decisive at high converter rates.

🎛️

Active Filter and Equalizer Design

Cascaded biquad sections built from the LT1632IS8 retain useful bandwidth well above the cutoff frequency because the 45 MHz gain-bandwidth product is matched to the 45 V/us slew rate. This matters for filters where large-signal steps - filter reconfiguration, input transient, or a full-scale sine at the output - would otherwise dominate the error budget and slow settling. Build higher-order filters with one dual package, one channel per section, and take advantage of the rail-to-rail input and output to operate from a single low-voltage supply where the signal occupies most of the available range. Keep the gain per section moderate so the closed-loop noise gain does not eat the bandwidth advantage.

🎧

Audio and Instrumentation Signal Paths

The LT1632IS8 is used where audio-band or instrumentation signals need low distortion and wide headroom: line-level buffers, headphone-driver front ends, and audio ADC input stages. A 45 V/us slew rate keeps large-signal distortion low at frequencies where the 45 MHz gain-bandwidth product still provides gain, and rail-to-rail output allows near-full use of the available supply swing, which is critical in battery and headphone-capable designs. Pair it with a clean reference and short, shielded input routing to preserve the noise performance the wide bandwidth provides. The trade-off is that a fast amplifier in a feedback loop demands careful grounding, so keep the ground return short and decouple each supply pin locally.

🧩

Sensor Signal Conditioning

Bridge, thermocouple and strain-gauge front ends benefit from the LT1632IS8 because the rail-to-rail input stage accepts sensor outputs that sit close to the negative rail, a common condition when the sensor is powered from a single supply referenced to ground. The 45 MHz bandwidth makes the amplifier usable both as a DC-level instrumentation buffer and as a wideband path for dynamic sensor outputs. Use the two channels for gain and filtering in a three-op-amp instrumentation topology, keeping the resistor network matched and placed close to the inputs. Because wideband amplifiers can pick up radiated noise, keep the gain bandwidth product in mind when sizing the first filter pole and avoid placing long traces next to switching regulators.

⚡

Power Supply Feedback and Control Loops

The LT1632IS8 is used as the error amplifier in voltage-mode control loops and as a buffer for a remote or high-impedance feedback node, where the rail-to-rail input and output let the loop sense and drive signals close to the rails without a separate bias network. The 45 V/us slew rate keeps loop dynamics well controlled even with significant output filter capacitance, and the 45 MHz gain-bandwidth product allows loops with crossover well above the audible range. Place the amplifier close to the feedback divider to minimize parasitic pickup, and remember that a fast error amplifier will amplify any noise picked up on the feedback trace, so keep feedback routing short and shield it from switching nodes.

🏭

Test and Measurement Instrumentation

Laboratory and factory test equipment uses the LT1632IS8 in driver and buffer paths where the measured signal must be reproduced faithfully at frequencies well beyond the audio band. The combination of rail-to-rail operation, 45 MHz bandwidth and 45 V/us slew rate covers a wide range of source impedances and load conditions without the distortion that a slower precision amplifier introduces when driving a terminated input. Use the two channels of one package for complementary or differential buffering to reduce board area in multi-channel fixtures. Because the amplifier is so fast, verify that the surrounding fixture cables and connectors do not become the limiting element, and terminate unused channels to avoid oscillation.

What is the gain-bandwidth product of the LT1632IS8?
The LT1632IS8 has a gain-bandwidth product of 45 MHz. According to the Analog Devices LT1632/LT1633 data sheet (16323fs), the LT1632 is a dual, rail-to-rail input and output precision op amp with a 45 MHz gain-bandwidth product and a 45 V/us slew rate. The matched GBW and slew-rate figures mean the amplifier keeps useful bandwidth even at modest closed-loop gains, which is why it is often selected for instrumentation and filter stages rather than only for audio.
What is the LT1632IS8 and what type of component is it?
The LT1632IS8 is a dual precision operational amplifier with rail-to-rail input and rail-to-rail output, offered in an 8-pin SO package by Analog Devices. An operational amplifier is a differential, high-gain amplifier that conditions a small difference between two input voltages and drives a scaled output; the LT1632 family is listed by the manufacturer as a PRODUCTION part in 8-pin PDIP and SO packages with the standard dual op amp pinout.
What is the supply voltage range of LT1632IS8?
The LT1632IS8 operates from plus or minus 15 V, a 30 V total supply span. Distributor listings describe the device as a dual precision amplifier for plus or minus 15 V / 30 V operation in an 8-pin SOIC package. Because the input and output stages are rail-to-rail, usable signal range extends to both supply rails, which makes the part well suited to single-supply systems running from a low positive rail as well as classic dual-rail laboratory supplies.
Where can I download the LT1632IS8 datasheet PDF?
The manufacturer data sheet is available at https://www.analog.com/media/en/technical-documentation/data-sheets/16323fs.pdf, and the product page with documentation links is at https://www.analog.com/en/products/lt1632.html. The LT1632/LT1633 data sheet covers the dual and quad versions, including the 8-pin PDIP and SO package options, the standard dual op amp pinout, and the typical application information for rail-to-rail precision signal chains.
Where can I find the LT1632IS8 pinout?
The LT1632IS8 uses the standard 8-pin dual op amp SOIC pinout: pin 1 is OUT A, pin 2 is -IN A, pin 3 is +IN A, pin 4 is V-, pin 5 is +IN B, pin 6 is -IN B, pin 7 is OUT B and pin 8 is V+. The Analog Devices data sheet (16323fs) confirms the LT1632 is available in 8-pin PDIP and SO packages with the standard dual op amp pinout, so PCB land patterns are shared with most general-purpose dual amplifiers.
How do I choose between LT1632IS8 and LT1632CS8?
Choose the LT1632IS8 for industrial temperature ranges from -40 °C to +85 °C, and the LT1632CS8 for room-temperature commercial or extended-commercial designs. Both are 8-pin SO dual rail-to-rail precision op amps with the same 45 MHz gain-bandwidth product and 45 V/us slew rate and the same pinout, so they are drop-in alternatives for each other; the deciding factor is the temperature grade, not the electrical performance.
What is the best drop-in replacement for LT1632IS8?
The closest drop-in replacement is the LT1632CS8 from the same family, which shares the 8-pin SO package, the standard dual op amp pinout and the same 45 MHz / 45 V/us performance, differing mainly in temperature grade. The LT1632IS8#PBF and LT1632IS8#TR variants carry the same die with different order codes for lead-free marking and tape-and-reel packaging. Use the pin-description table in the manufacturer data sheet when assigning PCB tracks for any of these options.
Is LT1632IS8 the same as LT1633IS8?
No. The LT1632 is the dual version and the LT1633 is the quad version of the same 45 MHz, 45 V/us rail-to-rail precision op amp family. The LT1633 is supplied in a 14-pin plastic SO package, so it is not a pin-for-pin substitute for the 8-pin LT1632IS8. Choose the LT1632IS8 when two amplifiers are needed; use the LT1633 when four amplifiers are required and the extra board area of a 14-pin package is acceptable.
What are the key specifications of LT1632IS8 that engineers should know?
The LT1632IS8 is a dual, rail-to-rail input and output precision op amp with a 45 MHz gain-bandwidth product and a 45 V/us slew rate, operating from plus or minus 15 V in an 8-pin SO package over -40 °C to +85 °C. It is available in 8-pin PDIP and SO packages with the standard dual op amp pinout, so it drops into the same footprint as most general-purpose dual amplifiers while adding substantially more bandwidth and slew rate than older precision parts.
Can LT1632IS8 be used as an ADC input buffer?
Yes, the LT1632IS8 is well suited to driving precision ADC inputs because it combines a 45 MHz gain-bandwidth product with a 45 V/us slew rate, so it can settle fast enough for high-resolution converters. Rail-to-rail input accepts signals near the supply rails, and rail-to-rail output lets the buffer swing to the converter's full-scale reference range. Care should be taken with capacitive loading; place a small isolation resistor between the amplifier output and the converter input when the ADC presents a large sampling capacitor.
Where to buy LT1632IS8 online and what is the lead time?
Use the Request a Quote form on this page to check current availability, price and lead time for the LT1632IS8, and to order the part in the required package and temperature grade. The manufacturer lists the LT1632 as a PRODUCTION part and the standard 8-pin SO configuration is a catalog item, so it is normally a build-to-order rather than an allocation-constrained purchase. Provide the required quantity, reel or tray packaging preference and any date-code requirements in the quote request.
What is the price of LT1632IS8?
Pricing for the LT1632IS8 is maintained in structured form on this page and updated daily, so use the Request a Quote form for a current unit price at your quantity, and for volume-break pricing at 1, 10, 100, 500 and 1000 pieces. The manufacturer product page also carries a starting list price reference for the LT1632 family. Request a quote for the exact order code you need, since reel versus tray and temperature grade can change the price structure.
LT1632IS8 vs LT1632CS8 - which is better for industrial equipment?
The LT1632IS8 is the better choice for industrial equipment because it is specified over -40 °C to +85 °C, while the LT1632CS8 carries a commercial temperature grade. Electrically they are equivalent: both are dual rail-to-rail precision op amps with a 45 MHz gain-bandwidth product, a 45 V/us slew rate and the standard 8-pin dual op amp pinout. If the enclosure temperature stays near room temperature and cost dominates, the LT1632CS8 will do the same job.
When should I choose the LT1632IS8 over a general-purpose dual op amp?
Choose the LT1632IS8 when the signal path needs more than the roughly 1 to 10 MHz bandwidth and a few V/us slew rate of a classic general-purpose dual amplifier, for example when driving a precision ADC, cascading high-order active filters, or handling full-scale audio/DAC output steps. Its 45 MHz / 45 V/us figures remove the slew-rate bottleneck that dominates most real-world large-signal settling errors in precision designs.
What is a good ADI equivalent for the LT1632IS8 in an 8-pin SO package?
For a same-manufacturer alternative in the same 8-pin SO footprint, the LT1632 family offers the LT1632CS8 (commercial temperature grade) and the LT1632IS8#PBF lead-free order code of the same device. For a different amplifier family in the same package, Analog Devices' AD8016AR and AD8015ARZ are single-channel 8-pin SO parts, so they are not direct substitutes for a dual. Always confirm the pin description table in the data sheet of the candidate before committing a footprint.

엔지니어링 참조 데이터: LT1632IS8 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the LT1632IS8 when your design needs a rail-to-rail precision amplifier that is genuinely fast: a 45 MHz gain-bandwidth product and 45 V/us slew rate remove the slew-rate bottleneck that usually limits precision signal chains, and the industrial -40 °C to +85 °C grade covers unheated industrial or automotive-adjacent environments. Pick the LT1632CS8 instead when the equipment stays near room temperature, since it is electrically identical but carries a commercial temperature grade and typically a lower cost. The LT1632IS8#PBF and LT1632IS8#TR order codes exist when you need lead-free marking or tape-and-reel presentation and are otherwise drop-in identical. Do not choose the LT1633 for this footprint: it is the quad version in a 14-pin package, so it is not a pin-for-pin substitute. If your design is a slow, low-bandwidth precision amplifier with no capacitive-load and no rail-to-rail requirement, a lower-cost general-purpose dual op amp will be adequate; if it involves ADC settling, large-signal steps or active filters, the LT1632IS8's speed is worth the premium.

대체품과의 비교

파라미터 이 제품 LT1632CS8 LT1632IS8#PBF LT1632IS8#TR
Package 8-pin SO (SOIC-8) 8-pin SO (SOIC-8) - same 8-pin SO (SOIC-8) - same 8-pin SO (SOIC-8) - same
Brand Analog Devices (Linear Technology) Analog Devices (Linear Technology) Analog Devices (Linear Technology) Analog Devices (Linear Technology)
Number of Amplifiers 2 (dual) 2 (dual) 2 (dual) 2 (dual)
Gain-Bandwidth Product 45 MHz 45 MHz 45 MHz 45 MHz
Slew Rate 45 V/us 45 V/us 45 V/us 45 V/us
Input / Output Type Rail-to-rail input and output Rail-to-rail input and output Rail-to-rail input and output Rail-to-rail input and output
Supply Voltage Range ±15 V (30 V total) ±15 V (30 V total) ±15 V (30 V total) ±15 V (30 V total)
Operating Temperature -40 °C to +85 °C Commercial grade (narrower than industrial) -40 °C to +85 °C -40 °C to +85 °C
Order Code / Packaging IS8 - standard industrial order code CS8 - commercial temperature order code Lead-free marked order code Tape-and-reel order code

주요 차별점

  • Speed headroom over classic general-purpose dual precision op amps (vs LT1632CS8)
  • Industrial temperature coverage while keeping the same 8-pin SO footprint (vs LT1632CS8)
  • Fully rail-to-rail input and output for single-supply signal chains (vs LT1632IS8#PBF)
  • Order-code flexibility for lead-free marking and reel packaging (vs LT1632IS8#TR)

설계 노트

The LT1632IS8 uses the standard 8-pin dual op amp SOIC footprint, so the land pattern is shared with virtually any general-purpose dual amplifier. Keep the supply decoupling capacitor within a few millimetres of pins 4 and 8, route V+ and V- on a quiet path away from switching nodes, and place the feedback resistors close to the input pins so that parasitic capacitance does not destabilise the 45 MHz gain-bandwidth product. Note that the exposed bottom of a standard SOIC-8 has no thermal pad, so thermal relief is limited to the leads and the copper pour around them.

With a 45 V/us slew rate, the LT1632IS8 can drive capacitive loads that slower precision amplifiers handle comfortably, so check the capacitive load recommendations in the manufacturer data sheet before connecting it directly to a long cable, a high-impedance node or an ADC sampling network. A common failure is oscillation at the output followed by a saturated amplifier; the standard cures are an isolation resistor of a few tens of ohms at the output, a small feedback capacitance across the feedback resistor, and avoiding a capacitive probe at the output node.

Rail-to-rail input stages on this amplifier accept common-mode voltages right up to the supply rails, which is a benefit in single-supply designs but means the input pins can be exposed to clamp currents if the signal exceeds the rail. Confirm the input common-mode range against the actual rail voltage in your design, and never connect a signal source that can swing outside the supply without protection. Because the gain-bandwidth product is high, keep input traces short and away from the output node to prevent parasitic feedback through board coupling.

Operating from plus or minus 15 V gives the LT1632IS8 a 30 V total supply span, but real boards rarely deliver a clean ±15 V; unregulated rails can overshoot at light load. Keep the supply within the absolute maximum ratings in the data sheet, and remember that the slew rate, not the quiescent current, determines the dynamic behaviour of the output stage. For dual-supply designs, use separate bulk and ceramic decoupling on each rail, since a shared return path between the two rails injects supply ripple directly into the output.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Analog Devices offers lead-free order codes for this device family (LT1632IS8#PBF) alongside the standard LT1632IS8 order code; no explicit RoHS, REACH, halogen-free or conflict-minerals statement is published on the product listing. The device is an industrial-grade analog amplifier and is not presented as AEC-Q100 qualified.

데이터 검증일: 2026-11-19 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

LT1632IS8 LT1632IS8 datasheet LT1632IS8 datasheet pdf LT1632IS8 pinout LT1632IS8 price LT1632IS8 stock Analog Devices LT1632IS8 LT1632 dual rail-to-rail op amp 45MHz LT1632 45V/us slew rate amplifier LT1632IS8 SOIC-8 amplifier replacement LT1632IS8 vs LT1632CS8 LT1632IS8 equivalent dual op amp LT1632IS8 ADC input buffer LT1632IS8 active filter design LT1632IS8 footprint and layout

관련 부품 & 용어

Analog Devices Linear Technology LT1632IS8 LT1632CS8 LT1632IS8#PBF LT1632IS8#TR LT1633 operational amplifier op amp dual amplifier rail-to-rail input rail-to-rail output gain-bandwidth product slew rate precision amplifier analog signal chain SOIC-8 8-pin SO package surface mount ADC driver active filter instrumentation common-mode input range RoHS AEC-Q100
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기