Analog Devices

LTC1318CN - Single 5V RS232/RS422 Transceiver | Analog Devices

부품 번호: LTC1318CN ✗ 단종
5 V Vdss RS232, RS422, AppleTalk Rds(on) 24-PDIP Package
MOQ: 1 |

LTC1318CN 개요

The Analog Devices LTC1318CN is a single 5V RS232/RS422/AppleTalk DCE transceiver with an integrated charge pump, two RS232 drivers, one differential RS422 driver, and dedicated RS232 receive capability in a 24-PDIP package. Its charge pump generates a ±8V supply for true RS232 output swings and requires four external 0.1µF capacitors. The LTC1318CN is designed for the DCE, or peripheral side, of an interface link.

An RS232/RS422 transceiver is an interface IC that converts logic-level signals between a host or controller and a wired communication link. RS232 is a single-ended, unbalanced interface commonly associated with computer serial ports, while RS422 uses differential signaling for improved noise immunity and longer-distance transmission. The AppleTalk designation identifies another supported serial-interface application for the combined transceiver architecture.

The principal feature of the LTC1318CN is its integrated on-board charge pump. This circuit develops the bipolar voltage needed for RS232 output levels without requiring a separate negative supply. The manufacturer datasheet specifies four external 0.1µF capacitors for the charge-pump function, allowing a compact implementation while retaining true RS232 output swings. The device operates from a single 5V supply, which simplifies connection to conventional digital logic.

The transceiver combines two RS232 drivers, a differential RS422 driver, and a dedicated RS232 receiver. This mixed-signal arrangement supports equipment that must interface with both RS232 and RS422 links while minimizing the number of external interface components. The three-driver, three-receiver designation in distributor product listings reflects the number of available driver and receiver channels, while the DCE orientation determines how the transceiver is connected within the system.

Typical uses include legacy peripheral interfaces, AppleTalk equipment, industrial data-collection equipment, computer serial-port adapters, and embedded systems that retain RS232 or RS422 connections. In these applications, the LTC1318CN can bridge low-voltage controller logic to externally biased RS232 signals or provide differential RS422 transmission. Its through-hole 24-PDIP format is also suitable for prototypes and legacy boards where leaded components remain easier to inspect, repair, or manually replace.

Designers should preserve the charge-pump capacitor layout recommended in the manufacturer datasheet and provide adequate logic-level interfacing for every driver and receiver connection. PCB placement must keep charge-pump current loops compact, while RS232 and RS422 routes should avoid sources of severe electromagnetic interference. Because the product is listed as obsolete, new production designs should contact Analog Devices for a current replacement before committing to a long-life program.

This page consolidates the functional description, interface requirements, package information, lifecycle status, and practical design considerations for engineers evaluating the LTC1318CN. It also distinguishes confirmed drop-in replacements from candidate parts whose electrical and pin compatibility still require formal validation.

드롭인 대체품: LTC1318CN — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

LTC1272-8CCN

✅ 드롭인
📦 24-PDIP
Both use a 24-pin DIP footprint; channel configuration, enable logic, supply limits, and threshold differences require comparison because numeric electrical deltas are not shown in the comparison source.

📋 참조 대체품 (카탈로그에 없음)

LTC1318CN 사양

Product Type Single RS232/RS422/AppleTalk DCE transceiver
공급 전압 5 V
RS232 Driver Count 2
RS422 Driver Count 1 differential driver
Driver/Receiver Configuration 3/3 transceiver
Charge Pump Output ±8 V
Charge Pump External Capacitors 4 x 0.1µF
Interface Standards RS232, RS422, AppleTalk
Connection Orientation DCE or peripheral side of an interface link
패키지 24-PDIP
실장 유형 Through-hole

LTC1318CN 24-pdip 핀 구성 가이드

LTC1318CN(24-pdip 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

LTC1318CN의 24-pdip 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: LTC1318CN.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

LTC1318CN 적합 용도: 6 애플리케이션s: Legacy RS232 DCE Interface, RS422 Differential Data Link, AppleTalk Peripheral Connectivity, Industrial Data Collection Terminal, Computer Serial-Port Adapter, Legacy Communication Equipment Repair.

🖥️

Legacy RS232 DCE Interface

The LTC1318CN fits a legacy data-communications equipment design requiring the DCE side of an RS232 link. Its two RS232 drivers use the integrated charge pump to generate ±8V output swings from a single 5V supply, while the dedicated receive path returns data to the host logic. This is particularly useful when maintaining equipment that must remain electrically compatible with an existing RS232 peripheral connector and controller board. The four external 0.1µF charge-pump capacitors must follow the manufacturer layout to control loop area and switching noise.

🏭

RS422 Differential Data Link

The LTC1318CN is appropriate for a DCE interface that combines differential RS422 transmission with single-ended RS232 connectivity. Its differential RS422 driver provides a noise-resistant channel for industrial equipment, point-of-sale systems, and legacy data-collection devices. Because the same package also generates bipolar RS232 levels, designers can reduce the number of separate interface ICs when both interface types are required. Board-level validation should confirm logic thresholds, cable length, termination, and signal polarity against the complete system specification.

🖥️

AppleTalk Peripheral Connectivity

The LTC1318CN supports AppleTalk-oriented DCE equipment while retaining the RS232 and RS422 functions in one device. It can simplify a legacy peripheral design by combining transmit and receive functions with an on-board charge pump rather than requiring a separate bipolar supply generator. The interface should be configured for the correct AppleTalk line conditions and DCE signal assignments. Since the component is obsolete, it is best suited to repair and continued support of installed AppleTalk equipment rather than new platform development.

🏭

Industrial Data Collection Terminal

A controller for a legacy industrial data-collection terminal can use the LTC1318CN when the field interface requires both RS232 and RS422 connectivity from one 5V supply. The RS232 channel supports service-console or peripheral connections, while the differential RS422 driver supports a more noise-tolerant equipment link. The through-hole 24-PDIP package facilitates inspection and repair in long-lived industrial products. Designers should verify isolation strategy, grounding, surge protection, and cable-side transient requirements because the internal interface ratings do not replace a complete industrial protection network.

🖥️

Computer Serial-Port Adapter

The LTC1318CN is suited to a legacy computer serial-port adapter requiring a 5V DCE interface and true RS232 output voltage. Its integrated charge pump removes the need for a separate negative voltage source, while the 24-PDIP package supports leaded assembly and straightforward board repair. A modern USB-to-serial solution may offer a smaller footprint and newer interface standards, but it changes system architecture. The LTC1318CN remains useful when software compatibility and direct preservation of the original DCE wiring are mandatory.

🔧

Legacy Communication Equipment Repair

The LTC1318CN is valuable for repairing communication equipment whose original design depends on the exact 24-PDIP footprint, 5V supply, and combined RS232/RS422 channel arrangement. A direct repair preserves existing connectors, logic interfaces, and PCB routing while restoring a failed transceiver. Before installation, verify pin numbering, charge-pump capacitor values, supply polarity, and interface polarity from the manufacturer documentation. Because the product is obsolete, maintainers should also acquire controlled quantities for foreseeable failures rather than relying on indefinite supply availability.

What is the LTC1318CN?
The LTC1318CN is a single 5V RS232/RS422/AppleTalk DCE transceiver housed in a 24-PDIP package. According to the Analog Devices LTC1318 datasheet, it combines two RS232 drivers, one differential RS422 driver, receive circuitry, and an integrated charge pump that generates ±8V for true RS232 output swings. It is intended for the DCE or peripheral side of a wired interface link.
What supply voltage does the LTC1318CN require?
The LTC1318CN operates from a single 5V supply. Its integrated charge pump creates the bipolar ±8V voltage required for RS232 output levels, so the circuit does not require a separate negative supply for the interface outputs. The manufacturer datasheet specifies four external 0.1µF capacitors for the charge-pump circuit. Logic interfacing and operating-temperature limits should be checked in the complete datasheet before design release.
Where can I download the LTC1318CN datasheet PDF?
The manufacturer LTC1318 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/1318.pdf. It describes the single 5V RS232/RS422 transceiver architecture, the ±8V charge-pump output, the four required 0.1µF capacitors, the driver and receiver functions, and the recommended implementation details. Use the manufacturer document for final pin assignments, electrical limits, and application-circuit values.
Where can I find the LTC1318CN pinout?
The LTC1318CN pinout must be taken from the pin-description table in the Analog Devices LTC1318 datasheet rather than inferred from the 24-PDIP outline. The confirmed package is 24-PDIP, but the public search excerpts do not enumerate all 24 terminal names. Use the datasheet diagram and pin-description table to assign charge-pump capacitors, supply pins, driver inputs, receiver outputs, and enable-related connections before laying out a PCB.
Is the LTC1318CN still active?
No. Analog Devices marks the LTC1318 product as obsolete and directs customers to contact the company for a potential replacement. The LTC1318CN is therefore most appropriate for repair, maintenance, and legacy-product support where an existing 24-PDIP design must be reproduced. New production programs should request a lifecycle recommendation and migration path from Analog Devices before placing additional orders.
What is the best drop-in replacement for the LTC1318CN?
The LTC1318CN has no confirmed drop-in replacement in the available cross-reference information. A comparison candidate is LTC1264CN#PBF, but its 24-PDIP footprint, terminal arrangement, protocol mix, supply requirements, and electrical limits must be verified before it can be treated as a drop-in substitute. Request a manufacturer-approved replacement or a controlled engineering review rather than assuming that a similar RS232/RS422 transceiver is pin-compatible.
Can LTC1264CN#PBF replace the LTC1318CN?
LTC1264CN#PBF is a candidate for evaluation, but it should not be called a drop-in replacement until its pinout and electrical behavior are verified. The LTC1318CN provides two RS232 drivers, one differential RS422 driver, a charge-pump-generated ±8V supply, and a 24-PDIP package. Compare those functions with LTC1264CN#PBF using the manufacturer datasheets and confirm every connected terminal before approving a substitution.
What can replace the LTC1318CN in an RS232 application?
The closest supported path is to ask Analog Devices for a recommended replacement because the LTC1318 is obsolete. For an RS232-only redesign, a modern multi-channel transceiver may reduce component count, but it may require a different package, logic voltage, charge-pump arrangement, or electrical interface. Treat any modernization as a schematic and PCB review rather than a literal drop-in change unless the replacement is explicitly specified as pin-compatible.
LTC1318CN vs LTC1264CN#PBF: which is better for a DCE interface?
The LTC1318CN is the documented choice for a 5V DCE interface requiring two RS232 drivers, one differential RS422 driver, and integrated ±8V charge-pump generation in 24-PDIP. LTC1264CN#PBF is a comparison candidate, but the available information does not establish identical terminal assignments or equivalent channel behavior. For an existing LTC1318CN board, retain the original part until a manufacturer or engineering validation confirms compatibility.
When should I choose the LTC1318CN over a modern RS232 transceiver?
Choose the LTC1318CN when maintaining an existing 24-PDIP board that depends on its exact pin arrangement, 5V operation, RS232/RS422 channel mix, or integrated charge pump. A modern transceiver may offer smaller packaging, lower power, or simpler interface selection, but it can require PCB changes and different logic thresholds. For new commercial or industrial designs with long production lives, an active alternative is generally preferable.
Is the LTC1318CN suitable for RS422 and AppleTalk interfaces?
The LTC1318CN is specifically identified as supporting RS232, RS422, and AppleTalk DCE applications. It includes two RS232 drivers, a differential RS422 driver, receive circuitry, and a charge pump that produces ±8V for RS232 output swings. This combination is useful in legacy peripheral equipment that must communicate through both unbalanced RS232 and differential RS422 links while retaining a single 5V supply.
How should the LTC1318CN charge-pump capacitors be placed?
Place the four required 0.1µF capacitors exactly as shown in the manufacturer application circuit and keep the associated charge-pump traces short. The external capacitors support the integrated circuit that generates ±8V for RS232 outputs, so excessive trace resistance or loop area can impair switching behavior and increase radiated emissions. Route the high-current charge-pump paths away from sensitive receive and logic traces, then observe the interface waveforms at the connector.
What are the key specifications of LTC1318CN that engineers should know?
The LTC1318CN is a single 5V RS232/RS422/AppleTalk DCE transceiver in a 24-PDIP package. Its confirmed architecture includes two RS232 drivers, one differential RS422 driver, receive circuitry, and an integrated charge pump producing ±8V with four external 0.1µF capacitors. The device is obsolete, so availability, longevity, and replacement planning are as important as the interface specifications when qualifying the component for production.
Where can I buy the LTC1318CN online?
Use the Request a Quote form on this page to request current LTC1318CN supply, lead time, and quantity availability. The part is listed as obsolete, so inventory and lifecycle constraints may vary by quantity and shipment date. Avoid committing to unverified stock or lead-time claims, and ask for the manufacturer name, package condition, and traceability requirements when the quote is returned.
What is the price of the LTC1318CN?
The current LTC1318CN price should be obtained through the Request a Quote form on this page because pricing for an obsolete 24-PDIP transceiver can vary with quantity, condition, and available inventory. The listing records confirm the part identity and package but do not contain qualifying quantity-break prices. A formal quote will establish the applicable unit price, minimum order quantity, and current availability.
What is the lead time for the LTC1318CN?
The current lead time for the LTC1318CN must be confirmed through the Request a Quote form on this page. Analog Devices identifies the product as obsolete, and no manufacturer lead-time schedule appears in the available product records. When requesting a quote, state the required annual usage, order quantity, acceptable package condition, and target date so the supplier can identify appropriate remaining supply.
Is the LTC1318CN in stock?
Stock for the LTC1318CN is not fixed by the product records because Analog Devices marks the device obsolete. Use the Request a Quote form on this page for current stock confirmation. For maintenance quantities, specify the required quantity and whether factory-new, factory-sealed, or previously stored material is acceptable. For new programs, request a lifecycle recommendation in addition to any available surplus inventory.

엔지니어링 참조 데이터: LTC1318CN — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the LTC1318CN when repairing or reproducing a legacy design that specifically requires a 24-PDIP RS232/RS422/AppleTalk DCE transceiver operating from 5V. Its integrated charge pump, two RS232 drivers, differential RS422 driver, and receive circuitry can preserve an existing DCE design without redesigning the interface architecture. Do not choose it for a new long-life program without a manufacturer migration recommendation because Analog Devices marks the product obsolete. For a modernization, compare modern transceivers by supply voltage, logic thresholds, protocol coverage, package, and exact terminal assignment rather than relying on the RS232 label. LTC1264CN#PBF may merit investigation, but it is not an approved drop-in replacement until its pinout and electrical operation are validated. If PCB changes and new development are possible, an active device generally provides better supply continuity and lifecycle planning.

대체품과의 비교

파라미터 이 제품
Brand Analog Devices
Package 24-PDIP
Product Type Single RS232/RS422/AppleTalk DCE transceiver
Supply Voltage 5 V
RS232 Drivers 2
RS422 Drivers 1 differential driver
Charge-Pump Output ±8 V
Charge-Pump Capacitors 4 x 0.1µF
Lifecycle Status Obsolete

주요 차별점

  • Integrated mixed-interface transceiver (vs MC1488NE4)
  • Single-supply true RS232 output generation (vs MC1489NG4)
  • Combined RS232 and RS422 DCE capability (vs LTC1264CN#PBF)

설계 노트

Implement the four external 0.1µF charge-pump capacitors using the exact manufacturer placement and connection arrangement. Keep capacitor return paths and charge-pump current loops compact to limit switching transients and radiated emissions. Route these high-current paths away from receiver inputs and low-level logic nets. Before release, inspect the assembled PCB for long return paths, incorrect polarity, and soldering bridges that could impair the ±8V charge-pump output.

Separate the slower RS232 and differential RS422 routing from sensitive logic and analog circuitry, and maintain a practical ground-current return beneath or adjacent to each outgoing interface route. The LTC1318CN can switch bipolar RS232 levels, so cable and board radiation must be evaluated with the intended enclosure and grounding arrangement. External protection may also be required at an exposed connector; do not treat the integrated transceiver as a substitute for application-specific surge or ESD protection.

Do not substitute the obsolete LTC1318CN with a generic RS232 transceiver based only on channel count or protocol labels. Verify the 24-PDIP terminal sequence, supply voltage, logic thresholds, driver polarity, receiver enable behavior, and charge-pump requirements against the manufacturer pin description. Also confirm that every external RS422 connection uses the intended termination and bias arrangement. A controlled substitution should compare each connected terminal and the system-level interface waveform.

The 24-PDIP package is primarily suited to through-hole assembly where heat can dissipate through the board and copper. For sustained high data activity, evaluate the complete transceiver dissipation and the surrounding enclosure temperature. Use the manufacturer's electrical limits and board-dependent thermal information for final analysis. Maintain service clearance around the package, avoid enclosing it without thermal consideration, and use an airflow strategy if a qualified replacement is installed in a denser production design.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The available manufacturer and distributor records do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to this general-purpose interface transceiver.

데이터 검증일: 2026-11-09 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

LTC1318CN datasheet LTC1318CN pinout LTC1318CN datasheet pdf LTC1318CN equivalent LTC1318CN replacement LTC1318CN 24-PDIP LTC1318CN RS232 RS422 LTC1318CN charge pump LTC1318CN price LTC1318CN stock Analog Devices LTC1318CN LTC1318CN vs LTC1264CN#PBF LTC1318CN AppleTalk DCE transceiver LTC1318CN obsolete replacement

관련 부품 & 용어

Analog Devices Linear Technology LTC1318CN LTC1318 LTC1264CN#PBF RS232 transceiver RS422 transceiver AppleTalk DCE transceiver single-ended signaling differential signaling charge pump power supply rejection ratio RS232 driver RS422 driver 24-PDIP through-hole package surface mount industrial data collection legacy serial interface interface IC semiconductor 5V supply ±8V output 0.1µF capacitor
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기