LTC1318CN - Single 5V RS232/RS422 Transceiver | Analog Devices
MPN: LTC1318CN ✗ پایان تولیدLTC1318CN نمای کلی
An RS232/RS422 transceiver is an interface IC that converts logic-level signals between a host or controller and a wired communication link. RS232 is a single-ended, unbalanced interface commonly associated with computer serial ports, while RS422 uses differential signaling for improved noise immunity and longer-distance transmission. The AppleTalk designation identifies another supported serial-interface application for the combined transceiver architecture.
The principal feature of the LTC1318CN is its integrated on-board charge pump. This circuit develops the bipolar voltage needed for RS232 output levels without requiring a separate negative supply. The manufacturer datasheet specifies four external 0.1µF capacitors for the charge-pump function, allowing a compact implementation while retaining true RS232 output swings. The device operates from a single 5V supply, which simplifies connection to conventional digital logic.
The transceiver combines two RS232 drivers, a differential RS422 driver, and a dedicated RS232 receiver. This mixed-signal arrangement supports equipment that must interface with both RS232 and RS422 links while minimizing the number of external interface components. The three-driver, three-receiver designation in distributor product listings reflects the number of available driver and receiver channels, while the DCE orientation determines how the transceiver is connected within the system.
Typical uses include legacy peripheral interfaces, AppleTalk equipment, industrial data-collection equipment, computer serial-port adapters, and embedded systems that retain RS232 or RS422 connections. In these applications, the LTC1318CN can bridge low-voltage controller logic to externally biased RS232 signals or provide differential RS422 transmission. Its through-hole 24-PDIP format is also suitable for prototypes and legacy boards where leaded components remain easier to inspect, repair, or manually replace.
Designers should preserve the charge-pump capacitor layout recommended in the manufacturer datasheet and provide adequate logic-level interfacing for every driver and receiver connection. PCB placement must keep charge-pump current loops compact, while RS232 and RS422 routes should avoid sources of severe electromagnetic interference. Because the product is listed as obsolete, new production designs should contact Analog Devices for a current replacement before committing to a long-life program.
This page consolidates the functional description, interface requirements, package information, lifecycle status, and practical design considerations for engineers evaluating the LTC1318CN. It also distinguishes confirmed drop-in replacements from candidate parts whose electrical and pin compatibility still require formal validation.
جایگزینهای drop-in برای LTC1318CN — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
LTC1272-8CCN
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
LTC1318CN مشخصات
| Product Type | Single RS232/RS422/AppleTalk DCE transceiver |
| ولتاژ تغذیه | 5 V |
| RS232 Driver Count | 2 |
| RS422 Driver Count | 1 differential driver |
| Driver/Receiver Configuration | 3/3 transceiver |
| Charge Pump Output | ±8 V |
| Charge Pump External Capacitors | 4 x 0.1µF |
| Interface Standards | RS232, RS422, AppleTalk |
| Connection Orientation | DCE or peripheral side of an interface link |
| بستهبندی | 24-PDIP |
| نوع نصب | Through-hole |
راهنمای پیکربندی پین LTC1318CN 24-pdip
پیکربندی پین برای LTC1318CN (پکیج 24-pdip). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای LTC1318CN.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
LTC1318CN مناسب است برای 6 کاربردs: Legacy RS232 DCE Interface, RS422 Differential Data Link, AppleTalk Peripheral Connectivity, Industrial Data Collection Terminal, Computer Serial-Port Adapter, Legacy Communication Equipment Repair.
Legacy RS232 DCE Interface
The LTC1318CN fits a legacy data-communications equipment design requiring the DCE side of an RS232 link. Its two RS232 drivers use the integrated charge pump to generate ±8V output swings from a single 5V supply, while the dedicated receive path returns data to the host logic. This is particularly useful when maintaining equipment that must remain electrically compatible with an existing RS232 peripheral connector and controller board. The four external 0.1µF charge-pump capacitors must follow the manufacturer layout to control loop area and switching noise.
پیشنهادی
RS422 Differential Data Link
The LTC1318CN is appropriate for a DCE interface that combines differential RS422 transmission with single-ended RS232 connectivity. Its differential RS422 driver provides a noise-resistant channel for industrial equipment, point-of-sale systems, and legacy data-collection devices. Because the same package also generates bipolar RS232 levels, designers can reduce the number of separate interface ICs when both interface types are required. Board-level validation should confirm logic thresholds, cable length, termination, and signal polarity against the complete system specification.
پیشنهادی
AppleTalk Peripheral Connectivity
The LTC1318CN supports AppleTalk-oriented DCE equipment while retaining the RS232 and RS422 functions in one device. It can simplify a legacy peripheral design by combining transmit and receive functions with an on-board charge pump rather than requiring a separate bipolar supply generator. The interface should be configured for the correct AppleTalk line conditions and DCE signal assignments. Since the component is obsolete, it is best suited to repair and continued support of installed AppleTalk equipment rather than new platform development.
پیشنهادی
Industrial Data Collection Terminal
A controller for a legacy industrial data-collection terminal can use the LTC1318CN when the field interface requires both RS232 and RS422 connectivity from one 5V supply. The RS232 channel supports service-console or peripheral connections, while the differential RS422 driver supports a more noise-tolerant equipment link. The through-hole 24-PDIP package facilitates inspection and repair in long-lived industrial products. Designers should verify isolation strategy, grounding, surge protection, and cable-side transient requirements because the internal interface ratings do not replace a complete industrial protection network.
پیشنهادی
Computer Serial-Port Adapter
The LTC1318CN is suited to a legacy computer serial-port adapter requiring a 5V DCE interface and true RS232 output voltage. Its integrated charge pump removes the need for a separate negative voltage source, while the 24-PDIP package supports leaded assembly and straightforward board repair. A modern USB-to-serial solution may offer a smaller footprint and newer interface standards, but it changes system architecture. The LTC1318CN remains useful when software compatibility and direct preservation of the original DCE wiring are mandatory.
پیشنهادی
Legacy Communication Equipment Repair
The LTC1318CN is valuable for repairing communication equipment whose original design depends on the exact 24-PDIP footprint, 5V supply, and combined RS232/RS422 channel arrangement. A direct repair preserves existing connectors, logic interfaces, and PCB routing while restoring a failed transceiver. Before installation, verify pin numbering, charge-pump capacitor values, supply polarity, and interface polarity from the manufacturer documentation. Because the product is obsolete, maintainers should also acquire controlled quantities for foreseeable failures rather than relying on indefinite supply availability.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای LTC1318CN — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول |
|---|---|
| Brand | Analog Devices |
| Package | 24-PDIP |
| Product Type | Single RS232/RS422/AppleTalk DCE transceiver |
| Supply Voltage | 5 V |
| RS232 Drivers | 2 |
| RS422 Drivers | 1 differential driver |
| Charge-Pump Output | ±8 V |
| Charge-Pump Capacitors | 4 x 0.1µF |
| Lifecycle Status | Obsolete |
تفاوتهای کلیدی
- Integrated mixed-interface transceiver (در مقابلMC1488NE4)
- Single-supply true RS232 output generation (در مقابلMC1489NG4)
- Combined RS232 and RS422 DCE capability (در مقابلLTC1264CN#PBF)
یادداشتهای طراحی
Implement the four external 0.1µF charge-pump capacitors using the exact manufacturer placement and connection arrangement. Keep capacitor return paths and charge-pump current loops compact to limit switching transients and radiated emissions. Route these high-current paths away from receiver inputs and low-level logic nets. Before release, inspect the assembled PCB for long return paths, incorrect polarity, and soldering bridges that could impair the ±8V charge-pump output.
Separate the slower RS232 and differential RS422 routing from sensitive logic and analog circuitry, and maintain a practical ground-current return beneath or adjacent to each outgoing interface route. The LTC1318CN can switch bipolar RS232 levels, so cable and board radiation must be evaluated with the intended enclosure and grounding arrangement. External protection may also be required at an exposed connector; do not treat the integrated transceiver as a substitute for application-specific surge or ESD protection.
Do not substitute the obsolete LTC1318CN with a generic RS232 transceiver based only on channel count or protocol labels. Verify the 24-PDIP terminal sequence, supply voltage, logic thresholds, driver polarity, receiver enable behavior, and charge-pump requirements against the manufacturer pin description. Also confirm that every external RS422 connection uses the intended termination and bias arrangement. A controlled substitution should compare each connected terminal and the system-level interface waveform.
The 24-PDIP package is primarily suited to through-hole assembly where heat can dissipate through the board and copper. For sustained high data activity, evaluate the complete transceiver dissipation and the surrounding enclosure temperature. Use the manufacturer's electrical limits and board-dependent thermal information for final analysis. Maintain service clearance around the package, avoid enclosing it without thermal consideration, and use an airflow strategy if a qualified replacement is installed in a denser production design.
اطلاعات انطباق
The available manufacturer and distributor records do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to this general-purpose interface transceiver.