M29W400FT55N3F - 4Mbit 55ns Parallel NOR Flash | Micron
부품 번호: M29W400FT55N3F ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $3.2 | $3.20 |
| 10 | $2.88 | $28.80 |
| 100 | $2.56 | $256.00 |
| 500 | $2.24 | $1,120.00 |
| 1,000 | $1.92 | $1,920.00 |
M29W400FT55N3F 개요
Parallel NOR Flash is a nonvolatile memory technology that allows direct random access to any memory location via a parallel address and data bus. In the embedded system hierarchy, it sits under the nonvolatile memory family alongside NAND Flash and serial NOR, and is most commonly used as boot memory for microcontrollers and microprocessors because code can be executed in place (XIP) directly from the array.
Key features of the M29W400FT55N3F include the 55 ns access time, which supports zero-wait-state execution on fast parallel buses; the x8/x16 bus configuration selectable via the BYTE pin, giving designers flexibility between 8-bit and 16-bit host interfaces; and industry-standard command-set compatibility that simplifies firmware drivers and programming tools.
The device operates from a supply voltage compatible with the M29W family architecture and supports block-organized erase with program and erase operations controlled through standard command sequences. Top-boot-block organization (indicated by the FT suffix) places the boot code at the top of the memory map, matching common microprocessor boot ROM conventions. Status polling and suspend/resume operation allow the host to read while an erase or program operation is in progress, reducing system latency.
Typical applications include boot code storage for industrial controllers, set-top boxes, networking equipment, printers, and telecom line cards, where the fast 55 ns parallel access enables in-place execution without shadow RAM copying.
A key design consideration is bus loading: with a parallel address/data interface, PCB trace length and capacitive loading directly affect the effective access time, so keep the host interface short and matched. Verify program and erase voltage sequencing per the manufacturer datasheet.
This page synthesizes distributor pricing, drop-in alternatives within the Micron M29W/M29F family, and practical design notes not found in the manufacturer datasheet. Pricing and stock data are as of 2026-09-05.
드롭인 대체품: M29W400FT55N3F — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: M29W400FT55N3F (동일 폼 팩터 및 풋프린트) — 차이점: Organization, Package, Memory Type, Interface, Memory Size.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
M29F400FT55N3F2
✅ 드롭인✓ 재고 있음
$1.51 / 개
데이터시트 보기 →M29F400FB55N3F2
✅ 드롭인✓ 재고 있음
$2.95 / 개
데이터시트 보기 →M29F800FT55N3F2
✅ 드롭인✓ 재고 있음
$0.78 / 개
데이터시트 보기 →M29F800FB55M3F2
✅ 드롭인✓ 재고 있음
$3.72 / 개
데이터시트 보기 →M29W400FT70N3F
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
M29W400FT55N3F 최대 정격 & 전기적 특성
| 메모리 유형 | NOR Flash |
| 메모리 크기 | 4 Mbit |
| 인터페이스 | Parallel |
| Access Time | 55 ns |
| Bus Configuration | x8 / x16 (BYTE-selectable) |
| 메모리 구성 | 4Mbit, block-organized, top boot block |
| Program/Erase | Block erase, word/byte program |
| 패키지 | 48-TSOP I |
| 실장 유형 | Surface Mount |
| Suspend/Resume | Erase/program suspend and resume |
| Packaging | Tape & Reel (TR suffix) |
| Prefix F in MPN | Pb-free package suffix |
M29W400FT55N3F 48-tsop i 핀 구성 가이드
M29W400FT55N3F(48-tsop i 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: M29W400FT55N3F.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
M29W400FT55N3F 적합 용도: 6 애플리케이션s: Embedded Boot Code Storage, Industrial Controllers and PLCs, Set-Top Boxes and Consumer Electronics, Networking and Telecom Equipment, Printers and Office Equipment, Automotive and Communication Modules (Legacy Retrofit).
Embedded Boot Code Storage
The M29W400FT55N3F's 55 ns access time and top-boot block organization make it a direct fit for boot code storage in embedded processors. The boot block at the top of the memory map matches the reset vector conventions of many microcontrollers and microprocessors, allowing the CPU to fetch its first instructions directly from flash without shadow RAM. In a typical circuit, the 16-bit data bus and up to 19 address lines connect straight to the host bus with only pull-ups on control pins and a bulk plus 0.1 uF decoupling capacitor per supply pin. The erase-suspend capability lets the host read other blocks while a boot block update is in progress, keeping field firmware updates non-disruptive. Expected benefit: zero-wait-state startup on buses rated for 55 ns asynchronous access.
추천
Industrial Controllers and PLCs
Industrial programmable logic controllers require firmware storage that survives power loss and retains data for the product lifetime. The M29W400FT55N3F provides 4 Mbit of nonvolatile storage with block-level erase granularity, so firmware and configuration tables can be updated independently. Its 55 ns parallel interface keeps deterministic startup times, an important property for controllers that must reach their run state within fixed supervision windows. The wide operating envelope of the M29W400 family and the standard industry command set simplify long-lifecycle maintenance, and the 48-TSOP I package solder-paste reflow profiles are well established on industrial assembly lines. Designers typically pair it with a supervisor/reset IC to hold the host in reset until supply rails stabilize before the first fetch.
추천
Set-Top Boxes and Consumer Electronics
Set-top box and consumer AV platforms use parallel NOR as the boot device that loads the main firmware image into DRAM. The M29W400FT55N3F's 55 ns access time shortens the cold-start path, while 4 Mbit capacity accommodates a bootloader plus compressed kernel stub. The x8/x16 selectable bus lets one board design serve both low-cost 8-bit hosts and 16-bit host SoCs. Because consumer designs demand cost efficiency, the tape-and-reel M29W400FT55N3F TR ordering code supports automated high-volume placement of the 48-TSOP I package. The suspend/resume feature allows background erase of an update block while the device continues serving read traffic, supporting over-the-air firmware updates without visible boot interruption.
추천
Networking and Telecom Equipment
Routers, switches, and telecom line cards store their boot loader and management firmware in parallel NOR. The M29W400FT55N3F fits this role with 55 ns asynchronous read, which satisfies the timing budget of many legacy network processor and PowerPC external buses without wait states. Its 4 Mbit array holds redundant bootloader images for fail-safe upgrades, and block protection of the boot region guards against corruption during in-field reprogramming. The 48-TSOP I footprint is shared across the Micron M29F400/M29F800 line, so a single PCB layout can carry 4 Mbit or 8 Mbit depending on the firmware sizing at build time. Status polling through the RY/BY output lets the host service other tasks during erase cycles.
추천
Printers and Office Equipment
Laser printers and multifunction office devices rely on parallel NOR for their resident firmware and font tables. The M29W400FT55N3F supplies 4 Mbit of storage with 55 ns access, enough for a printer bootloader plus raster-conversion microcode, while the 16-bit bus width accelerates font and glyph table reads during page rendering. Block-erase architecture allows the diagnostics and font partitions to be updated independently of the boot block. The 48-TSOP I package is a proven footprint in office-equipment manufacturing, and the erase-suspend/resume capability permits background refresh operations while user print jobs continue reading from the array, preserving perceived responsiveness.
추천
Automotive and Communication Modules (Legacy Retrofit)
Legacy telematics, body control, and communication modules that were designed around 3 V parallel NOR continue to be serviced with the M29W400FT55N3F as an aftermarket repair component. Its 55 ns speed grade matches the original bus timing of these designs, and the 48-TSOP I package mates with existing sockets and land patterns, avoiding PCB rework during module repair. The x8 mode simplifies use in modules originally built around 8-bit hosts. When updating firmware in the field, technicians can leverage the block-protection and erase-suspend features to update application code while preserving the protected boot block. Verify conformance temperature grade against the vehicle environment before deployment.
추천
추천 제품 요약
엔지니어링 참조 데이터: M29W400FT55N3F — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | M29F400FT55N3F2 | M29F400FB55N3F2 | M29F800FT55N3F2 | M29W400FT70N3F |
|---|---|---|---|---|---|
| Package | 48-TSOP I | 48-TSOP I - same | 48-TSOP I - same | 48-TSOP I - same | 48-TSOP I - same |
| Brand | Micron Technology | Micron Technology | Micron Technology | Micron Technology | Micron Technology |
| Density | 4 Mbit | 4 Mbit | 4 Mbit | 8 Mbit | 4 Mbit |
| Access Time | 55 ns | 55 ns | 55 ns | 55 ns | 70 ns |
| Boot Block Position | Top boot (FT) | Top boot (FT) | Bottom boot (FB) | Top boot (FT) | Top boot (FT) |
| Bus Width | x8/x16 | x8/x16 | x8/x16 | x8/x16 | x8/x16 |
| Family Generation | M29W400 (W family) | M29F400 (F family) | M29F400 (F family) | M29F800 (F family) | M29W400 (W family) |
주요 차별점
- Fastest speed grade in the M29W400 footprint family (vs M29W400FT70N3F)
- Top boot block organization matching processor reset vectors (vs M29F400FB55N3F2)
- Lower density, lower cost than the 8 Mbit upgrade (vs M29F800FT55N3F2)
설계 노트
Keep the parallel address/data bus traces between the M29W400FT55N3F and the host as short and balanced as possible - ideally under 100 mm on FR-4. Excessive capacitive loading from long traces or multiple loads degrades the effective 55 ns access time, potentially forcing wait states. Match trace lengths within the address group to minimize skew, and series-terminate address lines if reflections cause overshoot. Verify timing at maximum VCC tolerance and worst-case temperature, not just typical conditions.
Do not assume firmware compatibility from pin compatibility. The M29W400 (W family) and M29F400/M29F800 (F family) share the 48-TSOP I footprint but are different product generations; command sequences, status bits, and program/erase algorithms can differ. When substituting M29F400FT55N3F2 or M29F800FT55N3F2 into an existing design, re-read both datasheets and run full program, erase, and suspend/resume test cases on real hardware before qualifying. Also confirm boot block position (FT vs FB) matches the memory map.
Decouple the M29W400FT55N3F supply pins with a 0.1 uF ceramic capacitor placed within 5 mm of each VCC pin, plus a 4.7 uF to 10 uF bulk capacitor per device. Program and erase operations draw current pulses that can cause supply droop and corrupt an in-progress operation if decoupling is inadequate. Ensure the host holds CE#, OE#, and WE# to defined levels during power ramp to prevent spurious writes; a supervisor or pull-up/pull-down resistor network on WE# is standard practice.
Use the exposed standard 48-TSOP I land pattern per IPC footprint guidelines, with no-clean flux compatible with the fine 0.5 mm pitch leads. The device has no exposed thermal pad, so thermal design is not critical, but avoid routing high-dV/dt signals (clock lines, switching regulator nodes) directly under or beside the package. Add ESD protection on externally accessible data or address lines that leave the board, since NOR flash control pins are sensitive to transients during handling.
규정 준수 정보
The F suffix in the MPN (N3F / 3F) denotes a Pb-free package per Micron legacy naming conventions, indicating lead-free construction. RoHS and REACH status must be confirmed from the Micron product page or datasheet.