M2GL010-1FG484I - 12K LEs, 233 I/O IGLOO2 FPGA | Microchip
부품 번호: M2GL010-1FG484I ✓ 활성M2GL010-1FG484I 개요
An FPGA is a semiconductor device whose digital logic is defined by a configuration stored in nonvolatile flash memory. The IGLOO2 family combines programmable logic blocks, embedded SRAM, and user I/O in devices intended for low-power embedded systems. Rather than implementing a fixed function in an ASIC or changing software on a microcontroller, an engineer can adapt the device logic, interfaces, and boot behavior after hardware development.
The M2GL010 provides 12,084 logic elements and 233 configurable I/O elements, offering substantially more parallel interface capacity than many small microcontrollers. Its nominal 1.2 V core operation and 484-ball FBGA package support compact systems with high I/O density. The 233 I/O elements can be assigned according to the device bank and pin-description information for the selected package, while internal flash allows the programmed configuration to remain without continuous external memory support.
IGLOO2 devices are positioned for general-purpose functions such as interface bridging, I/O expansion and conversion, video and image processing support, system management, and secure connectivity functions. The target combines a relatively small logic-cell count with a high pin count, making it most useful when a design needs flexible edge connectivity rather than very deep parallel processing.
Typical installations include industrial control modules, communication interfaces, sensor aggregation equipment, video data converters, embedded security controllers, and compact control platforms. Engineers should choose an FPGA when deterministic parallel I/O, reconfigurable logic, and nonvolatile configuration justify the additional board complexity and configuration workflow.
For layout, follow the manufacturer's 484-FBGA package documentation for ball assignment, power, ground, and decoupling requirements. Place supply and ground-plane connections according to the IGLOO2 pin user guide, preserve adequate BGA escape-routing density, and validate every I/O voltage bank against the external interface before finalizing the board.
This page combines the exact MPN identity, package and logic characteristics with ordering-guide details, verified drop-in alternatives, comparison parameters, and PCB implementation guidance. It is intended to accelerate component selection while keeping the engineering trade-offs and package constraints visible.
드롭인 대체품: M2GL010-1FG484I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: M2GL010-1FG484I (동일 폼 팩터 및 풋프린트) — 차이점: Configuration Memory, Logic Elements, Mounting Type, Package.
M2GL010T-1FG484I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
M2GL010-FG484I
✅ 드롭인가격 문의
데이터시트 보기 →M2GL010S-1FG484I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
M2GL010TS-1FG484I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
M2GL010-FGG484I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
M2GL010-1FG484I 최대 정격 & 전기적 특성
| FPGA Family | IGLOO2 |
| Logic Elements | 12,084 cells |
| Configurable I/O Elements | 233 I/O |
| Core Supply Voltage | 1.2 V nominal |
| Core Supply Voltage Range | 1.14 V to 1.26 V |
| 패키지 | 484-ball FBGA |
| Ball Pitch | 1.00 mm |
| Programmable Logic Type | Flash-configured FPGA |
| Configuration Memory | Nonvolatile embedded flash |
| Product Type | Low-density field-programmable gate array |
| 실장 유형 | Surface-mount BGA |
M2GL010-1FG484I 484-ball fbga 핀 구성 가이드
M2GL010-1FG484I(484-ball fbga 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: M2GL010-1FG484I.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
M2GL010-1FG484I 적합 용도: 6 애플리케이션s: Industrial Interface Conversion, Sensor Aggregation and Control, Video and Image Data Conditioning, Secure Connectivity and Data Routing, Compact Embedded Control Platform, Communication Bridge and I/O Expansion.
Industrial Interface Conversion
The M2GL010-1FG484I fits industrial interface-conversion equipment that must translate several parallel or low-speed serial signals into a common control format. Its 12,084 logic elements provide enough configurable fabric for protocol state machines, timing alignment, buffering, and supervisory logic, while 233 I/O elements simplify connection to legacy peripherals. The 1.2 V core and 484-ball FBGA package permit a compact implementation when board area is limited. Design I/O banks around the external voltage levels and validate every high-speed interface against the device timing specifications. The nonvolatile flash configuration also preserves the conversion logic through power cycles, reducing the need for an external configuration loader.
추천
Sensor Aggregation and Control
The M2GL010-1FG484I is suitable for sensor-aggregation modules that combine readings from multiple digital sensors, condition discrete signals, and present a unified result to a host processor. The 233 configurable I/O elements offer extensive parallel connectivity, reducing the number of external interface components and allowing debouncing, filtering, diagnostics, and event routing to be implemented in the FPGA fabric. With 12,084 logic elements, the device can host several acquisition channels while preserving timing margins. Engineers should use the manufacturer pin and bank information to assign each sensor interface to a compatible voltage domain. The embedded flash configuration maintains the acquisition logic across resets and simplifies field deployment of identical sensor configurations.
추천
Video and Image Data Conditioning
The M2GL010-1FG484I can support video and image-processing front ends that require deterministic data capture, format conversion, or pixel-stream routing before transmission to another processor. Its 12,084 logic elements support parallel datapaths and control logic, and the 233 I/O elements provide numerous connections for video timing, synchronization, and command interfaces. The 484-FBGA package offers high I/O density but requires careful escape routing and solid power distribution. Implement timing constraints for the selected interface, keep related signals in compatible I/O banks, and verify board-level channel skew against the design's timing margin. Flash configuration allows the same conditioning function to be reproduced reliably across multiple units.
추천
Secure Connectivity and Data Routing
The M2GL010-1FG484I is applicable to secure connectivity equipment that must combine protocol handling, data routing, and access-control logic in a compact embedded module. Its 12,084 logic cells can implement packet framing, command decoding, state machines, and security-control functions, while 233 I/O elements support host processors, network interfaces, status indicators, and configuration signals. The nonvolatile embedded flash lets the programmed routing and access logic remain resident after power removal. Security implementations must add the required cryptographic functions and key-management design rather than treating general FPGA logic as inherently secure. Board-level planning should address high-speed escape routes, clean supply distribution, and recovery behavior during configuration or peripheral faults.
추천
Compact Embedded Control Platform
The M2GL010-1FG484I fits a compact embedded control platform that requires more parallel control capability than a small microcontroller while avoiding the resources of a large FPGA. Engineers can implement sequencing, fault management, timing, and interface adaptation in the 12,084-cell fabric, and 233 I/O elements can connect sensors, actuators, memory, and communications circuits. The 1.2 V core supports integration into a multi-rail board, while embedded flash retains the control configuration. Partition the design into clearly timed clock domains, specify I/O drive and slew settings for each external device, and confirm reset and configuration behavior in the final power architecture. This arrangement is particularly useful when firmware updates are too costly but hardware logic must remain adaptable.
추천
Communication Bridge and I/O Expansion
The M2GL010-1FG484I is well suited to communication bridges that translate between dissimilar bus or peripheral interfaces and provide additional I/O endpoints. Its 233 configurable I/O elements allow both bridge pins and local expansion signals to be handled in one package, while 12,084 logic elements support buffering, arbitration, width conversion, and status generation. The 484-FBGA footprint is useful for high-density boards but demands careful escape routing from fine-pitch balls. Each external interface should be assigned to a bank with an appropriate voltage range, and unused balls should follow Microchip's guidance for the selected IGLOO2 device. Embedded flash provides a repeatable, nonvolatile implementation of the bridge logic for deployed or replicated equipment.
추천
추천 제품 요약
엔지니어링 참조 데이터: M2GL010-1FG484I — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | M2GL010T-1FG484I | M2GL010-FG484I | M2GL010S-1FG484I | M2GL010TS-1FG484I | M2GL010-FGG484I |
|---|---|---|---|---|---|---|
| Package | 484-ball FBGA | 484-ball FBGA | 484-ball FBGA | 484-ball FBGA | 484-ball FBGA | 484-ball FBGA |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| FPGA Family | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 |
| Logic Elements | 12,084 cells | 12,084 cells | 12,084 cells | 12,084 cells | 12,084 cells | 12,084 cells |
| Configurable I/O Elements | 233 I/O | 233 I/O | 233 I/O | 233 I/O | 233 I/O | 233 I/O |
| Core Supply Voltage | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal |
| Configuration Technology | Nonvolatile embedded flash | Nonvolatile embedded flash | Nonvolatile embedded flash | Nonvolatile embedded flash | Nonvolatile embedded flash | Nonvolatile embedded flash |
| Ordering Suffix | 1FG484I | T-1FG484I | FG484I | S-1FG484I | TS-1FG484I | FGG484I |
주요 차별점
- Provides 233 configurable I/O elements in a single low-density device (vs M2GL010-FGG484I)
- Combines 12,084 logic cells with a 1.00 mm-pitch 484-FBGA package (vs M2GL010T-1FG484I)
- Uses nonvolatile embedded flash for persistent configuration (vs M2GL010S-1FG484I)
- Targets compact systems requiring high edge connectivity (vs M2GL010TS-1FG484I)
설계 노트
Follow the Microchip FG484 package drawing and pin-description user guide for all 484-ball escape routing. The 1.00 mm ball pitch requires a via-in-pad or microvia strategy where supported, plus dog-bone fanout where component placement allows it. Keep the BGA footprint, solder-mask definition, paste apertures, and assembly land pattern synchronized with the manufacturer drawing. Validate escape routes with the PCB fabricator before releasing the design.
Partition the 1.2 V core rail and applicable I/O-bank supplies according to the M2GL010 power architecture. Use the manufacturer's recommended supply topology, placement, and decoupling network without substituting generic capacitor values. Account for simultaneous I/O switching when planning return-current paths and plane transitions. Validate the assembled board for acceptable voltage ripple and temperature rise under worst-case logic and I/O activity.
Assign external interfaces to I/O banks whose voltage ranges match their drivers before finalizing the PCB. Keep sensitive or timing-critical routes short and free of unnecessary layer changes, while separating noisy switching returns from clock and low-level signal paths. Match trace lengths where the external interface requires source-synchronous timing. Review unused balls and configuration pins against the current IGLOO2 user guide before schematic sign-off.
Do not treat a shared 484-FBGA footprint as complete device interchangeability. Although the listed M2GL010 alternatives have the same 12,084-cell and 233-I/O architecture, the ordering suffix can affect qualification, temperature coverage, or other ordering attributes. Check the exact M2GL010-1FG484I ordering entry, confirm the programmed device and bitstream compatibility, and review reset and configuration behavior after any substitution.
규정 준수 정보
Compliance status must be confirmed for the exact M2GL010-1FG484I ordering suffix and current Microchip product documentation.