MAX232DWRE4 - Dual RS-232 Transceiver | Texas Instruments
부품 번호: MAX232DWRE4 ✓ 활성MAX232DWRE4 개요
An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 voltage levels and converts incoming RS-232 signals back into logic-compatible levels. It belongs to the interface IC hierarchy, where transceivers combine a transmitter, receiver, and charge-pump circuit into a complete serial-port interface. This integration reduces the number of external components required for legacy serial communication.
The MAX232DWRE4 includes two drivers and two receivers, allowing two full-duplex RS-232 links when both directions of each channel are connected. Its recommended V.28 interface supports asynchronous data transmission, while the 120 kbit/s operating rate is suitable for many industrial-control, point-of-sale, instrumentation, and embedded-console interfaces. A typical supply current of 8 mA helps limit system power consumption in equipment with limited thermal budgets.
The internal charge-pump design generates positive and negative voltage levels needed by the drivers. The device requires 1.0 µF charge-pump capacitors and operates from one 5 V supply, eliminating the need for a separate bipolar supply. Receiver inputs tolerate ±30 V levels, providing protection margin for RS-232 signals encountered on cables and connected equipment. Its stated ESD protection exceeds JESD-2000-V human-body-model requirements.
Typical applications include industrial RS-232 equipment, service-console interfaces, data-acquisition systems, and legacy peripheral connections. The SOIC-16 package is also well suited to through-hole assembly and repair workflows where a surface-mount SOIC remains compatible with existing boards. Because RS-232 is point-to-point, designers should use twisted-pair wiring, controlled ground references, and appropriately terminated shields to reduce noise pickup.
Place the 1.0 µF charge-pump capacitors close to their associated pins and connect the device ground directly to the interface ground. Keep RS-232 traces away from sensitive analog and high-speed digital signals, and provide a nearby low-impedance bypass connection from VCC to ground. These measures reduce switching-generated noise and help preserve receiver signal integrity.
This page combines electrical specifications, application guidance, package details, and pin-compatible replacement options for faster engineering evaluation. It also highlights the distinctions that matter when deciding whether a MAX232-family part, an enhanced charge-pump transceiver, or another RS-232 implementation best matches a new or existing design.
드롭인 대체품: MAX232DWRE4 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MAX232DWRE4 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Product Type, Number of Drivers, Number of Receivers, Interface Standard.
MAX232EWE
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MAX232AWE
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MAX232CWE+
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →MAX3232CWE+
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →MAX3232EWE+
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MAX232CSE+
✅ 드롭인가격 문의
데이터시트 보기 →ST232CDR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX232DWRE4 사양
| Product Type | Dual EIA-232 driver and receiver transceiver |
| Number of Drivers | 2 drivers |
| Number of Receivers | 2 receivers |
| 공급 전압 | 5 V |
| Maximum Data Rate | 120 kbit/s |
| RS-232 Input Levels | ±30 V |
| Charge-Pump Capacitor | 1.0 µF |
| Typical Supply Current | 8 mA |
| Recommended Interface | V.28 |
| ESD Protection | Exceeds JESD-2000-V human-body-model protection |
| Duplex Operation | Full duplex |
| 패키지 | 16-pin SOIC, 7.50 mm width |
| 실장 유형 | Surface mount |
| 공급 전류 | 8 mA typical |
| RoHS 상태 | unknown |
| REACH Status | unknown |
| Lead-Free Status | unknown |
MAX232DWRE4 16-pin soic, 7.50 mm width 핀 구성 가이드
MAX232DWRE4(16-pin soic, 7.50 mm width 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: MAX232DWRE4.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MAX232DWRE4 적합 용도: 6 애플리케이션s: Industrial Control Console, Point-of-Sale Peripheral Interface, Data-Acquisition Equipment, Embedded Service Interface, Legacy Peripheral Upgrade, Instrumentation Communication Link.
Industrial Control Console
The MAX232DWRE4 fits an industrial control console that must communicate with legacy RS-232 equipment through a single 5 V logic rail. Its two transmitters and two receivers support two full-duplex serial links, while the 120 kbit/s rate is more than adequate for command traffic, status reporting, and configuration exchanges. Place the IC between the UART logic and DB9 or terminal connector. Use 1.0 µF charge-pump capacitors close to the device and route the RS-232 traces away from switching regulators to preserve receiver signal integrity.
추천
Point-of-Sale Peripheral Interface
The MAX232DWRE4 is appropriate for a point-of-sale terminal supporting receipt printers, barcode scanners, or service equipment with RS-232 ports. A 5 V supply, 8 mA typical operating current, and 120 kbit/s data-rate capability suit compact embedded systems with limited power and board area. The two transmit and two receive channels can support independent peripherals or paired full-duplex links. Use a defined signal ground, twisted-pair wiring, and a nearby supply bypass capacitor to reduce noise coupling from display, scanner, and power-supply circuitry.
추천
Data-Acquisition Equipment
The MAX232DWRE4 can connect laboratory and industrial data-acquisition equipment to a host computer through an RS-232 port. The receiver accepts signal levels of ±30 V, providing tolerance for bipolar RS-232 inputs, while the 120 kbit/s limit supports commands and moderate measurement-data streams. The integrated charge pump reduces the external component count compared with older discrete-driver interfaces. Keep instrumentation ground and RS-232 ground coordinated to prevent ground-potential differences from forcing unwanted current through signal inputs.
추천
Embedded Service Interface
The MAX232DWRE4 fits embedded equipment that exposes a service or diagnostic port over RS-232. Two receivers allow status or diagnostic inputs, while two drivers support command and control outputs. Operating from one 5 V supply simplifies system power design, and the 16-pin SOIC package supports conventional surface-mount assembly. For field reliability, protect externally accessible connector lines with suitable surge and ESD protection, use a chassis or signal-ground strategy appropriate to the installation, and separate the connector region from sensitive analog circuitry.
추천
Legacy Peripheral Upgrade
The MAX232DWRE4 is useful when modernizing a controller that must preserve an existing RS-232 connector while simplifying its power circuitry. The integrated charge-pump architecture generates the required bipolar driver voltage from one 5 V supply, reducing board area compared with older discrete implementations. Its 120 kbit/s operating rate covers legacy peripheral traffic, and its dual-channel arrangement can serve two ports or two directions. Before replacement, verify connector pin numbering, signal polarity, handshake requirements, cable length, and whether the old circuit relied on unusual receiver levels.
추천
Instrumentation Communication Link
The MAX232DWRE4 supports bidirectional communication between a controller and instrumentation operating at RS-232 levels. Its two transmit channels can send commands, while its two receive channels collect acknowledgements or measurements. The device supports data rates up to 120 kbit/s and uses a single 5 V supply, which fits instrument-control boards with constrained power architecture. A practical layout keeps the 1.0 µF charge-pump capacitors short, provides local VCC bypass, and routes the bipolar interface through a connector region away from high-gain analog inputs.
추천
추천 제품 요약
엔지니어링 참조 데이터: MAX232DWRE4 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MAX232EWE | MAX232AWE | MAX232CWE | MAX3232CWE+ | ST232CDR |
|---|---|---|---|---|---|---|
| Package | 16-SOIC, 7.50 mm width | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | STMicroelectronics |
| Transmitter Channels | 2 | 2 | 2 | 2 | 2 | 2 |
| Receiver Channels | 2 | 2 | 2 | 2 | 2 | 2 |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Maximum Data Rate | 120 kbit/s | 120 kbit/s | 120 kbit/s | 120 kbit/s | 120 kbit/s | 120 kbit/s |
주요 차별점
- Single-supply RS-232 conversion with integrated charge pump (vs MAX232EWE)
- Shutdown support in the MAX232A alternative (vs MAX232AWE)
- Cross-brand sourcing without changing the SOIC interface class (vs ST232CDR)
설계 노트
Place the two 1.0 µF charge-pump capacitors close to the corresponding MAX232DWRE4 pins and keep their return paths short. Route the generated charge-pump nodes away from UART signals and sensitive analog inputs. The charge-pump section switches internally to create the bipolar RS-232 voltages, so compact capacitor placement reduces switching loops and helps prevent the transceiver from coupling noise into nearby circuitry.
Connect the transceiver ground to the RS-232 signal ground at the system grounding strategy location and use twisted-pair wiring for each RS-232 connection. Keep connector and cable-routing areas away from clocks, switching power stages, and high-impedance sensors. If the connected equipment can be powered independently, evaluate ground-potential differences to prevent excessive current through receiver inputs or the protection structure.
Decouple the 5 V supply locally at the MAX232DWRE4 with a low-impedance bypass capacitor and a short ground connection. Estimated: with an 8 mA typical operating current and a 5 V supply, the IC's nominal supply-power consumption is 40 mW, excluding charge-pump and transient effects. The PCB must nevertheless accommodate switching current associated with the on-chip charge pump without sharing a long return path with sensitive circuits.
Do not treat the 5 V logic supply as an RS-232 signal level. The charge-pump network generates the bipolar voltages required at driver outputs, but every transmitter and receiver connection must still follow the manufacturer pin diagram. Also avoid substituting a similar 16-pin part without checking temperature grade, shutdown pins, receiver thresholds, charge-pump capacitor values, and the exact package width.
규정 준수 정보
The manufacturer information identifies JESD-2000-V human-body-model ESD protection, but no RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this ordering code. The device is an industrial interface IC rather than an automotive-qualified product.