Texas Instruments

MAX232DWRE4 - Dual RS-232 Transceiver | Texas Instruments

MPN: MAX232DWRE4 ✓ 啟用中
5 V Vdss 8 mA Id 16-pin SOIC, 7.50 mm width Package
MOQ: 1 |

MAX232DWRE4 概覽

The Texas Instruments MAX232DWRE4 is a dual EIA-232 driver and receiver IC providing two transmit channels and two receive channels in a 16-pin SOIC package. It operates from a single 5 V supply, supports data rates up to 120 kbit/s, and accepts RS-232 input levels of ±30 V. The device uses onboard charge-pump capacitors to generate the bipolar voltage required by the RS-232 drivers.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 voltage levels and converts incoming RS-232 signals back into logic-compatible levels. It belongs to the interface IC hierarchy, where transceivers combine a transmitter, receiver, and charge-pump circuit into a complete serial-port interface. This integration reduces the number of external components required for legacy serial communication.

The MAX232DWRE4 includes two drivers and two receivers, allowing two full-duplex RS-232 links when both directions of each channel are connected. Its recommended V.28 interface supports asynchronous data transmission, while the 120 kbit/s operating rate is suitable for many industrial-control, point-of-sale, instrumentation, and embedded-console interfaces. A typical supply current of 8 mA helps limit system power consumption in equipment with limited thermal budgets.

The internal charge-pump design generates positive and negative voltage levels needed by the drivers. The device requires 1.0 µF charge-pump capacitors and operates from one 5 V supply, eliminating the need for a separate bipolar supply. Receiver inputs tolerate ±30 V levels, providing protection margin for RS-232 signals encountered on cables and connected equipment. Its stated ESD protection exceeds JESD-2000-V human-body-model requirements.

Typical applications include industrial RS-232 equipment, service-console interfaces, data-acquisition systems, and legacy peripheral connections. The SOIC-16 package is also well suited to through-hole assembly and repair workflows where a surface-mount SOIC remains compatible with existing boards. Because RS-232 is point-to-point, designers should use twisted-pair wiring, controlled ground references, and appropriately terminated shields to reduce noise pickup.

Place the 1.0 µF charge-pump capacitors close to their associated pins and connect the device ground directly to the interface ground. Keep RS-232 traces away from sensitive analog and high-speed digital signals, and provide a nearby low-impedance bypass connection from VCC to ground. These measures reduce switching-generated noise and help preserve receiver signal integrity.

This page combines electrical specifications, application guidance, package details, and pin-compatible replacement options for faster engineering evaluation. It also highlights the distinctions that matter when deciding whether a MAX232-family part, an enhanced charge-pump transceiver, or another RS-232 implementation best matches a new or existing design.

直接替換替代品,適用於 MAX232DWRE4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: MAX232DWRE4 (相同外形與佔位) — 差異在於 Package, Product Type, Number of Drivers, Number of Receivers, Interface Standard.

Analog Devices
Package: 16-SOIC narrow
Product Type: Dual RS-232 Transceiver
Number of Drivers: 2
比較對象 MAX232DWRE4 →
Analog Devices
Package: 16-pin wide SOIC
Product Type: RS-232 line driver/receiver transceiver
Number of Drivers: 2
比較對象 MAX232DWRE4 →

MAX232EWE

✅ 直接替換 ⚠️ 規格未經驗證
📦 16-SOIC
Same dual RS-232 function, 5 V supply, and 120 kbit/s class; operating-temperature limits differ by the ordering grade, which remains within the 30% compatibility criterion.

📋 參考替代品(不在目錄中)

MAX232AWE

✅ 直接替換 ⚠️ 規格未經驗證
📦 16-SOIC
Same dual RS-232 function, 5 V supply, and 120 kbit/s class; shutdown functionality differs by 1 control function while core electrical ratings match within 10%.

📋 參考替代品(不在目錄中)

MAX232CWE+

✅ 直接替換 ⚠️ 規格未經驗證
Analog Devices
📦 16-SOIC
RS-232 line driver/receiver transceiver · 4.5 V to 5.5 V · 2 · 2 · RS-232; EIA/TIA-232E and V.28/V.24 family application · Dual RS-232 transmitter · Dual RS-232 receiver · CMOS/TTL-compatible digital interface

聯絡詢價

查看資料表 →

MAX3232CWE+

✅ 直接替換 ⚠️ 規格未經驗證
Analog Devices
📦 16-SOIC
Dual RS-232 transceiver · 2 · 2 · 3.0 V to 5.5 V · 1 Mbps · RS-232 · 16-pin SOIC · Surface Mount

聯絡詢價

查看資料表 →

MAX3232EWE+

✅ 直接替換 ⚠️ 規格未經驗證
📦 16-SOIC
Same dual RS-232 conversion, 5 V supply, and 120 kbit/s class; enhanced-family shutdown and ESD features differ while core interface parameters match within 10%.

📋 參考替代品(不在目錄中)

MAX232CSE+

✅ 直接替換
Analog Devices
📦 16-SOIC
Dual RS-232 Transceiver · EIA/TIA-232E, V.28, V.24 · 4.5 V to 5.5 V · 2 · 2 · 2/2 Full RS-232 · 16-SOIC narrow · 16 pins

聯絡詢價

查看資料表 →

ST232CDR

✅ 直接替換
📦 16-SOIC
Same dual RS-232 function, 5 V supply, and 120 kbit/s class; receiver thresholds and temperature-grade limits differ by up to 20% from the target classification.

📋 參考替代品(不在目錄中)

MAX232DWRE4 規格

Product Type Dual EIA-232 driver and receiver transceiver
Number of Drivers 2 drivers
Number of Receivers 2 receivers
供應電壓 5 V
Maximum Data Rate 120 kbit/s
RS-232 Input Levels ±30 V
Charge-Pump Capacitor 1.0 µF
Typical Supply Current 8 mA
Recommended Interface V.28
ESD Protection Exceeds JESD-2000-V human-body-model protection
Duplex Operation Full duplex
封裝 16-pin SOIC, 7.50 mm width
安裝類型 Surface mount
供應電流 8 mA typical
RoHS 狀態 unknown
REACH Status unknown
Lead-Free Status unknown

MAX232DWRE4 16-pin soic, 7.50 mm width 腳位配置指南

MAX232DWRE4(16-pin soic, 7.50 mm width 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

MAX232DWRE4 的 16-pin soic, 7.50 mm width 封裝腳位圖

無詳細腳位定義資料: MAX232DWRE4.

請參閱 資料表 以查看完整腳位配置。

典型應用

MAX232DWRE4 適用於 6 應用s: Industrial Control Console, Point-of-Sale Peripheral Interface, Data-Acquisition Equipment, Embedded Service Interface, Legacy Peripheral Upgrade, Instrumentation Communication Link.

🏭

Industrial Control Console

The MAX232DWRE4 fits an industrial control console that must communicate with legacy RS-232 equipment through a single 5 V logic rail. Its two transmitters and two receivers support two full-duplex serial links, while the 120 kbit/s rate is more than adequate for command traffic, status reporting, and configuration exchanges. Place the IC between the UART logic and DB9 or terminal connector. Use 1.0 µF charge-pump capacitors close to the device and route the RS-232 traces away from switching regulators to preserve receiver signal integrity.

🖥️

Point-of-Sale Peripheral Interface

The MAX232DWRE4 is appropriate for a point-of-sale terminal supporting receipt printers, barcode scanners, or service equipment with RS-232 ports. A 5 V supply, 8 mA typical operating current, and 120 kbit/s data-rate capability suit compact embedded systems with limited power and board area. The two transmit and two receive channels can support independent peripherals or paired full-duplex links. Use a defined signal ground, twisted-pair wiring, and a nearby supply bypass capacitor to reduce noise coupling from display, scanner, and power-supply circuitry.

🔧

Data-Acquisition Equipment

The MAX232DWRE4 can connect laboratory and industrial data-acquisition equipment to a host computer through an RS-232 port. The receiver accepts signal levels of ±30 V, providing tolerance for bipolar RS-232 inputs, while the 120 kbit/s limit supports commands and moderate measurement-data streams. The integrated charge pump reduces the external component count compared with older discrete-driver interfaces. Keep instrumentation ground and RS-232 ground coordinated to prevent ground-potential differences from forcing unwanted current through signal inputs.

🔧

Embedded Service Interface

The MAX232DWRE4 fits embedded equipment that exposes a service or diagnostic port over RS-232. Two receivers allow status or diagnostic inputs, while two drivers support command and control outputs. Operating from one 5 V supply simplifies system power design, and the 16-pin SOIC package supports conventional surface-mount assembly. For field reliability, protect externally accessible connector lines with suitable surge and ESD protection, use a chassis or signal-ground strategy appropriate to the installation, and separate the connector region from sensitive analog circuitry.

⚡

Legacy Peripheral Upgrade

The MAX232DWRE4 is useful when modernizing a controller that must preserve an existing RS-232 connector while simplifying its power circuitry. The integrated charge-pump architecture generates the required bipolar driver voltage from one 5 V supply, reducing board area compared with older discrete implementations. Its 120 kbit/s operating rate covers legacy peripheral traffic, and its dual-channel arrangement can serve two ports or two directions. Before replacement, verify connector pin numbering, signal polarity, handshake requirements, cable length, and whether the old circuit relied on unusual receiver levels.

📡

Instrumentation Communication Link

The MAX232DWRE4 supports bidirectional communication between a controller and instrumentation operating at RS-232 levels. Its two transmit channels can send commands, while its two receive channels collect acknowledgements or measurements. The device supports data rates up to 120 kbit/s and uses a single 5 V supply, which fits instrument-control boards with constrained power architecture. A practical layout keeps the 1.0 µF charge-pump capacitors short, provides local VCC bypass, and routes the bipolar interface through a connector region away from high-gain analog inputs.

What are the key specifications of MAX232DWRE4 that engineers should know?
The MAX232DWRE4 is a 5 V, dual-driver and dual-receiver RS-232 transceiver rated for data rates up to 120 kbit/s. According to the Texas Instruments MAX232 datasheet, it uses 1.0 µF charge-pump capacitors, accepts ±30 V receiver inputs, has a typical supply current of 8 mA, and is offered in a 16-pin SOIC package. Its two transmit and two receive channels support two full-duplex RS-232 links when the appropriate connections are made.
Where can I download the MAX232DWRE4 datasheet PDF?
The official MAX232DWRE4 datasheet PDF is available from the Texas Instruments product document at https://www.ti.com/lit/ds/symlink/max232dwre4.pdf. The document contains the electrical characteristics, receiver and driver limits, charge-pump configuration, typical application circuit, and pin descriptions. Use the manufacturer document for PCB pin assignment and electrical-limit checks rather than relying on secondary catalog summaries.
Where can I find the MAX232DWRE4 pinout?
The MAX232DWRE4 pin assignment is defined in the pin-description and connection diagrams in the Texas Instruments MAX232 datasheet. The device uses a 16-pin SOIC outline with dedicated driver outputs, receiver inputs, charge-pump connections, supply, and ground pins. Assign PCB tracks by matching those numbered package pins to the manufacturer diagram and observing the SOIC pin-1 orientation mark.
Can MAX232DWRE4 operate from a single 5 V supply?
Yes. The MAX232DWRE4 operates from a single 5 V supply and internally generates the positive and negative voltages required by the RS-232 drivers. According to the Texas Instruments MAX232 datasheet, the charge-pump section requires two 1.0 µF capacitors. This arrangement removes the external bipolar supply and discrete charge-pump components that older RS-232 interface designs commonly required.
What is the maximum data rate of MAX232DWRE4?
The MAX232DWRE4 supports RS-232 communication at up to 120 kbit/s. According to the Texas Instruments MAX232 datasheet, the device implements the recommended V.28 interface and uses an on-chip charge pump to support bipolar RS-232 output levels from a 5 V supply. Ensure the UART, cable, and connected equipment are configured for a rate no greater than the supported 120 kbit/s limit.
Where can I buy MAX232DWRE4 and check its current price?
Use the Request a Quote form on this page to request MAX232DWRE4 pricing, stock confirmation, current lead time, and suitable order quantities. The Request a Quote workflow provides a direct response for this exact 16-pin SOIC ordering code rather than relying on a static price that may change with inventory or purchasing volume.
What is the current lead time for MAX232DWRE4?
Request the current MAX232DWRE4 lead time through the Request a Quote form on this page. Lead time can vary with order quantity, inventory position, and production scheduling, so it should be confirmed for the exact package suffix and quantity. Include your requested quantity, delivery date, and shipment destination when submitting the inquiry.
Is MAX232DWRE4 in stock?
Use the Request a Quote form on this page to request an immediate stock confirmation for MAX232DWRE4. Inventory status should be checked against the exact 16-pin SOIC ordering code and your required quantity. This avoids treating a general catalog listing as a guarantee of availability for a specific production schedule.
What can replace MAX232DWRE4?
MAX232DWRE4 can be replaced by a pin-compatible 16-pin SOIC RS-232 transceiver that supports a single 5 V supply, at least two driver and receiver channels, and a comparable data rate. MAX232EWE and MAX232AWE are same-family choices, while MAX232CWE+ and ST232CDR provide alternate sourcing paths. Confirm temperature grade, shutdown behavior, ESD rating, and exact pin mapping before substitution.
Is MAX232DWRE4 the same as MAX232AWE?
The MAX232DWRE4 and MAX232AWE are closely related single-supply RS-232 transceivers in 16-pin SOIC packages, but they are not identical in every operating feature. According to the MAX232 family documentation, the MAX232A family adds shutdown functionality, whereas the ordering suffix also affects temperature grade and delivery format. Verify the functional difference and pin-level requirements before exchanging them.
What is the best drop-in replacement for MAX232DWRE4?
The MAX232EWE is the closest same-family choice because it preserves the MAX232 function, dual-channel configuration, single 5 V supply, and 16-pin SOIC footprint. The MAX232AWE is appropriate when shutdown control is beneficial, while ST232CDR offers a cross-brand option. A drop-in decision still requires checking the receiver threshold, driver slew behavior, temperature range, and charge-pump capacitor layout.
What is the best STMicroelectronics equivalent for MAX232DWRE4?
The ST232CDR is the leading cross-brand candidate because it provides a dual RS-232 driver and receiver in a 16-pin SOIC package and is identified as a pin-to-pin replacement for the MAX232DW family. According to the MAX232DW cross-reference information, it is designed for a 5 V supply and operation up to 120 kbit/s. Confirm receiver thresholds and charge-pump capacitor values during schematic review.
MAX232DWRE4 vs MAX232EWE: which is better for industrial control?
Choose MAX232DWRE4 when the system requires the specific ordering configuration and temperature grade represented by its suffix, and choose MAX232EWE when it is the preferred package and qualification option for the production design. Both provide two RS-232 driver and receiver channels from a 5 V supply at up to 120 kbit/s. Compare exact temperature limits, tape-and-reel configuration, and approved-part status before selecting one.
When should I choose MAX232DWRE4 over MAX232CWE?
Choose MAX232DWRE4 when the installed board and approved BOM call for the wider-temperature MAX232DW ordering family and its exact 16-pin SOIC configuration. Choose MAX232CWE when its temperature range, availability, or sourcing status better matches the production environment. Both devices perform the core dual-channel RS-232 conversion from one 5 V supply, but suffix-specific environmental ratings remain a valid selection criterion.
Is MAX232DWRE4 suitable for a point-of-sale terminal interface?
Yes. The MAX232DWRE4 is suitable for a point-of-sale terminal that uses a legacy RS-232 port for receipt printers, scanners, or service equipment. Its 120 kbit/s maximum rate exceeds common serial-port traffic, while two drivers and two receivers support full-duplex links. Use shielded or twisted-pair cabling, a defined signal ground, and a 1.0 µF charge-pump capacitor at each charge-pump node.

工程參考資料,適用於 MAX232DWRE4 — 比較、設計指引及合規資訊。

選型指南

Choose MAX232DWRE4 when the design requires the exact Texas Instruments MAX232DW 16-pin SOIC configuration, a 5 V supply, two full-duplex RS-232 channels, and operation up to 120 kbit/s. Choose MAX232EWE for a closely related same-family option after confirming environmental limits and orderable packaging. Choose MAX232AWE when shutdown control is useful, and choose MAX3232CWE+ when enhanced charge-pump-family features are preferred. Consider ST232CDR as a cross-brand sourcing option, but verify receiver thresholds, temperature grade, ESD performance, and charge-pump capacitor values before releasing the PCB or production BOM.

與替代品比較

參數 本產品 MAX232EWE MAX232AWE MAX232CWE MAX3232CWE+ ST232CDR
Package 16-SOIC, 7.50 mm width 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments STMicroelectronics
Transmitter Channels 2 2 2 2 2 2
Receiver Channels 2 2 2 2 2 2
Supply Voltage 5 V 5 V 5 V 5 V 5 V 5 V
Maximum Data Rate 120 kbit/s 120 kbit/s 120 kbit/s 120 kbit/s 120 kbit/s 120 kbit/s

主要差異化特點

  • Single-supply RS-232 conversion with integrated charge pump (對比MAX232EWE)
  • Shutdown support in the MAX232A alternative (對比MAX232AWE)
  • Cross-brand sourcing without changing the SOIC interface class (對比ST232CDR)

設計說明

Place the two 1.0 µF charge-pump capacitors close to the corresponding MAX232DWRE4 pins and keep their return paths short. Route the generated charge-pump nodes away from UART signals and sensitive analog inputs. The charge-pump section switches internally to create the bipolar RS-232 voltages, so compact capacitor placement reduces switching loops and helps prevent the transceiver from coupling noise into nearby circuitry.

Connect the transceiver ground to the RS-232 signal ground at the system grounding strategy location and use twisted-pair wiring for each RS-232 connection. Keep connector and cable-routing areas away from clocks, switching power stages, and high-impedance sensors. If the connected equipment can be powered independently, evaluate ground-potential differences to prevent excessive current through receiver inputs or the protection structure.

Decouple the 5 V supply locally at the MAX232DWRE4 with a low-impedance bypass capacitor and a short ground connection. Estimated: with an 8 mA typical operating current and a 5 V supply, the IC's nominal supply-power consumption is 40 mW, excluding charge-pump and transient effects. The PCB must nevertheless accommodate switching current associated with the on-chip charge pump without sharing a long return path with sensitive circuits.

Do not treat the 5 V logic supply as an RS-232 signal level. The charge-pump network generates the bipolar voltages required at driver outputs, but every transmitter and receiver connection must still follow the manufacturer pin diagram. Also avoid substituting a similar 16-pin part without checking temperature grade, shutdown pins, receiver thresholds, charge-pump capacitor values, and the exact package width.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The manufacturer information identifies JESD-2000-V human-body-model ESD protection, but no RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this ordering code. The device is an industrial interface IC rather than an automotive-qualified product.

資料驗證日期: 2026-11-09 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

MAX232DWRE4 datasheet MAX232DWRE4 pinout MAX232DWRE4 datasheet pdf Texas Instruments MAX232DWRE4 MAX232DWRE4 equivalent MAX232DWRE4 replacement MAX232DWRE4 cross reference MAX232DWRE4 vs MAX232EWE MAX232DWRE4 120kbps RS-232 MAX232DWRE4 16-SOIC footprint MAX232DWRE4 application circuit MAX232DWRE4 price MAX232DWRE4 stock MAX232DWRE4 5V RS-232 transceiver MAX232DWRE4 industrial RS-232

相關元件與詞彙

Texas Instruments MAX232DWRE4 MAX232EWE MAX232AWE MAX232CWE MAX3232CWE+ ST232CDR Analog Devices STMicroelectronics RS-232 EIA-232 interface IC RS-232 transceiver line driver line receiver charge-pump capacitor single 5 V supply 120 kbit/s V.28 SOIC-16 surface mount ESD protection JESD-2000-V industrial control point-of-sale terminal
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情