MAX3221EEAE/GG8 - 250kbps RS-232 Transceiver | Analog Devices
부품 번호: MAX3221EEAE/GG8 ✓ 활성MAX3221EEAE/GG8 개요
An RS-232 transceiver is an interface IC that converts logic-level digital signals into RS-232 differential voltage levels and converts incoming RS-232 signals back into logic-compatible levels. The MAX3221E family combines one transmit channel and one receive channel with low-power 3V operation, making it suitable for embedded equipment, industrial controllers, point-of-sale terminals, and other systems that exchange data over short-distance serial links.
The device operates from a 3.0V to 5.5V supply, supports data rates up to 250kbps, and includes enhanced electrostatic-discharge protection of ±15kV. Automatic shutdown and wake-up functions reduce supply current when the interface is inactive, while transmitter and receiver enable pins support controlled power management in systems with multiple peripheral connections.
MAX3221EEAE/GG8 uses the MAX3221E single-channel architecture, providing one RS-232 transmitter and one receiver rather than the multiple-channel arrangement used by some larger transceivers. Its 16-pin SSOP package supports compact PCB layouts, and the industrial-temperature ordering option is identified by the GG8 package and temperature suffix.
Typical applications include serial adapters, test equipment, industrial control interfaces, barcode scanners, embedded data-collection systems, and communication links between a host controller and an external RS-232 peripheral. The 250kbps capability is appropriate for legacy serial protocols and control traffic that do not require modern high-speed differential interfaces.
When designing the circuit, place the charge-pump capacitors and interface-protection components close to the device and route the RS-232 connector signals away from sensitive analog and digital signal paths. Confirm the supply voltage, logic levels, connector pinout, and charge-pump capacitor values against the manufacturer datasheet before releasing the PCB layout.
This page combines the device specifications, package information, application guidance, design considerations, and drop-in alternatives into a practical engineering reference for selecting and implementing the MAX3221EEAE/GG8.
드롭인 대체품: MAX3221EEAE/GG8 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
MAX3221EEAE+
✅ 드롭인가격 문의
데이터시트 보기 →MAX3221EEAE/GG8-T
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX3221EEAE/GG8 사양
| Product Type | RS-232 transceiver |
| Number of Transmitters | 1 |
| Number of Receivers | 1 |
| Supply Voltage Range | 3.0V to 5.5V |
| Maximum Data Rate | 250kbps |
| ESD Protection | ±15kV |
| 공급 전류 | 1µA typical low-power shutdown specification |
| Interface Standard | EIA/TIA-232 |
| Communication Standard | V.28/V.24 |
| Automatic Shutdown | Yes |
| Automatic Wake-Up | Yes |
| 패키지 | 16-pin SSOP |
| Package Form | Gull-wing rectangular SSOP |
| Number of Terminals | 16 |
| Temperature Grade | Industrial |
| 실장 유형 | Surface mount |
| RoHS 상태 | Not stated in the retrieved product information |
| REACH Status | Not stated in the retrieved product information |
| AEC-Q100 Qualification | Not applicable |
MAX3221EEAE/GG8 gull-wing rectangular ssop 핀 구성 가이드
MAX3221EEAE/GG8(gull-wing rectangular ssop 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: MAX3221EEAE/GG8.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MAX3221EEAE/GG8 적합 용도: 6 애플리케이션s: Industrial serial control, Point-of-sale and data-collection terminals, Test and measurement equipment, Embedded serial adapters, Barcode and handheld scanner interfaces, Communication and telemetry equipment.
Industrial serial control
The MAX3221EEAE/GG8 is well suited to industrial controllers and equipment interfaces that need one RS-232 transmit path and one receive path. Its 3.0V to 5.5V supply range allows operation from common 3.3V or 5V system rails, while 250kbps data-rate capability covers typical control and status protocols. Automatic shutdown and wake-up help reduce current when the link is inactive, and ±15kV ESD protection improves robustness at an external connector. Use the manufacturer application circuit to select charge-pump capacitors and protection components, and keep the RS-232 traces separated from sensitive logic.
추천
Point-of-sale and data-collection terminals
The MAX3221EEAE/GG8 can connect a compact point-of-sale terminal or data-collection device to a legacy RS-232 peripheral when only one bidirectional serial link is needed. The single-transmitter/single-receiver architecture avoids unused channels, while automatic wake-up allows the interface to become active when valid serial activity is present. Its surface-mount 16-pin SSOP package supports compact board layouts, and the 250kbps rate is appropriate for many barcode-scanner and payment-terminal protocols. Confirm the peripheral’s connector pinout, logic levels, and handshake timing before finalizing the PCB.
추천
Test and measurement equipment
The MAX3221EEAE/GG8 provides a practical RS-232 service interface for test equipment, programming fixtures, and laboratory instruments. A single channel is sufficient for many command-and-response instruments that use one receive and one transmit line pair. The device operates from 3.0V to 5.5V, supports up to 250kbps, and includes enhanced ±15kV ESD protection for connector access in portable or shared test environments. Place the transceiver near the connector and route the differential RS-232 side away from precision analog circuitry to reduce coupling.
추천
Embedded serial adapters
The MAX3221EEAE/GG8 is appropriate for embedded adapters that translate a host controller’s UART signals to RS-232 for an external instrument or peripheral. Its low-voltage operation fits systems powered from 3.3V or 5V rails, and the low-power shutdown behavior is useful in battery- or duty-cycled installations. The 16-pin SSOP package keeps the interface compact, while the 250kbps maximum data rate supports common serial control protocols. Use controlled impedance and short RS-232 routing where possible, and verify the external device’s voltage-level and handshake requirements.
추천
Barcode and handheld scanner interfaces
The MAX3221EEAE/GG8 can provide the RS-232 link between a handheld scanner, barcode reader, and host system in designs using a one-transmitter/one-receiver connection. The automatic shutdown and wake-up functions help manage power when the scanner is idle, and ±15kV ESD protection is valuable because the serial cable is frequently connected and disconnected. The 250kbps capability is suitable for many scanner command protocols. Confirm trigger, request, and response signals at the logical interface and use the manufacturer’s recommended protection network at the connector.
추천
Communication and telemetry equipment
The MAX3221EEAE/GG8 can serve as the local RS-232 interface in telemetry, configuration, and communication equipment that exchanges commands with a host or service terminal. The device supports both 3.3V and 5V supply environments, has one dedicated transmitter and receiver, and reaches 250kbps for legacy serial traffic. Automatic shutdown reduces power consumption during inactive periods and wake-up supports reconnection without continuously powering the interface. Design the connector and cable path for reliable ground and ESD management, and confirm that the linked equipment uses compatible RS-232 signaling.
추천
엔지니어링 참조 데이터: MAX3221EEAE/GG8 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MAX3221EEAE+ | MAX3221EEAE/GG8-T |
|---|---|---|---|
| Package | 16-pin SSOP | 16-pin SSOP | 16-pin SSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Product Type | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver |
| Number of Transmitters | 1 | 1 | 1 |
| Number of Receivers | 1 | 1 | 1 |
| Maximum Data Rate | 250kbps | 250kbps | 250kbps |
| Supply Voltage Range | 3.0V to 5.5V | 3.0V to 5.5V | 3.0V to 5.5V |
| ESD Protection | ±15kV | ±15kV | ±15kV |
| Automatic Shutdown and Wake-Up | Yes | Yes | Yes |
주요 차별점
- Single-channel RS-232 architecture (vs MAX3221EEAE+)
- Low-voltage serial interface (vs MAX3221EEAE/GG8-T)
- ESD and power-management integration (vs MAX3221EEAE+)
설계 노트
Place the charge-pump capacitors, supply bypass capacitor, and RS-232 protection components close to the MAX3221EEAE/GG8 pins. Keep the RS-232 connector-side traces short and route them away from sensitive analog inputs, clock signals, and high-speed digital nets. This reduces parasitic coupling and helps the ±15kV ESD design retain useful signal integrity.
Do not confuse the MAX3221EEAE/GG8 single-channel device with the MAX3232 family. A different channel count can invalidate an assumed direct replacement even when both parts use similar SSOP packages. Confirm pin names, enable polarity, supply range, channel count, and external charge-pump connections before approving a substitution.
Use the manufacturer’s recommended supply-decoupling arrangement and verify the power rail remains within 3.0V to 5.5V during transients. Automatic shutdown and wake-up can reduce average consumption, but the complete power budget should include the transmitter, receiver, charge-pump circuitry, and any external protection network.
규정 준수 정보
The retrieved component information identifies industrial-grade MAX3221EEAE/GG8 product characteristics but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. Verify the current manufacturer environmental documentation for production release.