MAX3221EEAE+TG1Z - 250kbps RS-232 Transceiver | Analog Devices
부품 번호: MAX3221EEAE+TG1Z ✓ 활성MAX3221EEAE+TG1Z 개요
An RS-232 transceiver is an interface IC that translates logic-level signals into RS-232 voltage levels and converts incoming RS-232 signals back into digital logic levels. It belongs to the broader hierarchy of interface ICs, serial transceivers, communication interfaces, and semiconductor devices. The MAX3221EEAE+TG1Z is intended for equipment that needs one serial channel with low supply voltage, automatic power management, and stronger ESD protection than a basic RS-232 interface.
The principal features include a 3.0V to 5.5V operating supply range, operation at up to 250kbps, a 1uA shutdown current, plus or minus 15kV ESD protection, and automatic shutdown and wake-up. These characteristics suit compact industrial controls, test equipment, point-of-sale terminals, and embedded serial ports. The single driver and single receiver arrangement also makes the MAX3221 a compact choice when one RS-232 link is sufficient.
MAX3221E-family devices use charge-pump circuitry to generate the positive and negative voltage levels required by RS-232, allowing operation from a single low-voltage supply. The automatic shutdown function reduces supply current when the interface is inactive, while wake-up support helps the system recover without continuous high-power operation. The 16-pin SSOP outline supports conventional surface-mount assembly and compact board layouts.
Typical applications include industrial serial adapters, programmable-logic-controller communication, barcode and point-of-sale equipment, instrumentation, and embedded control systems. For designs using a 3.3V or 5V logic supply, the MAX3221EEAE+TG1Z can provide a protected RS-232 connection without a separate negative power rail. Its one-channel architecture should be selected when the system does not require multiple RS-232 drivers or receivers.
The main design consideration is ensuring that the external charge-pump capacitors, transceiver signal lines, and logic-side connections follow the pin-description and application-circuit guidance in the manufacturer datasheet. Place the charge-pump capacitors close to their specified pins and preserve the recommended protection-network arrangement on external RS-232 connectors. Confirm that the selected logic levels and supply voltage match the host controller.
This page combines the manufacturer product information, package details, verified comparison candidates, and practical interface-design guidance. It also identifies where detailed pin assignments, environmental ratings, and lifecycle-specific technical parameters should be confirmed in the official MAX3221 documentation.
드롭인 대체품: MAX3221EEAE+TG1Z — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MAX3221EEAE+TG1Z (동일 폼 팩터 및 풋프린트) — 차이점: ESD Protection, Supply Voltage Range, Package, Automatic Shutdown, Maximum Data Rate.
MAX3221EAE+T
✅ 드롭인가격 문의
데이터시트 보기 →MAX3221EEUE
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX3250EAI+T
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX3232ECAE+T
✅ 드롭인가격 문의
데이터시트 보기 →MAX3221EEAE+TG1Z 사양
| Product Type | RS-232 transceiver |
| Number of Drivers | 1 |
| Number of Receivers | 1 |
| Supply Voltage Range | 3.0V to 5.5V |
| Maximum Data Rate | 250kbps |
| ESD Protection | plus or minus 15kV |
| 셧다운 전류 | 1uA |
| Interface Standard | EIA/TIA-232, RS-232, V.28/V.24 |
| Automatic Shutdown | Yes |
| Automatic Wake-Up | Yes |
| 패키지 | 16-pin SSOP |
| 실장 유형 | Surface Mount |
| Transceiver Configuration | 1/1 full RS-232 transceiver |
| Operating Supply | Single supply |
MAX3221EEAE+TG1Z 16-pin ssop 핀 구성 가이드
MAX3221EEAE+TG1Z(16-pin ssop 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: MAX3221EEAE+TG1Z.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MAX3221EEAE+TG1Z 적합 용도: 6 애플리케이션s: Industrial Controller Serial Interface, Point-of-Sale Terminal, Barcode Scanner Interface, Test and Measurement Equipment, Embedded Data Acquisition Unit, Programmable Logic Controller Communication.
Industrial Controller Serial Interface
The MAX3221EEAE+TG1Z fits an industrial controller that needs one isolated-by-interface RS-232 link to a programmer, sensor gateway, or service port. Its 3.0V-to-5.5V supply range supports 3.3V and 5V embedded systems, while the 250kbps rate provides more headroom than typical slow serial-control links. The single driver and receiver keep the board area compact, and automatic shutdown helps the controller reduce activity when the port is not communicating. Designers should follow the manufacturer charge-pump capacitor layout and confirm the host UART voltage compatibility.
추천
Point-of-Sale Terminal
A point-of-sale terminal can use the MAX3221EEAE+TG1Z when it requires a single RS-232 connection to a scanner, receipt printer, or customer-display device. The 3.0V-to-5.5V operating range is compatible with common embedded terminal rails, and the 1uA shutdown current supports a low-activity serial port. The plus or minus 15kV enhanced ESD protection is particularly valuable when the cable terminates near a user-accessible enclosure. In a production design, add connector-side protection and route the transceiver ground carefully to reduce noise and ground-loop issues.
추천
Barcode Scanner Interface
The MAX3221EEAE+TG1Z is suitable for a barcode-scanner interface requiring one host UART connection at up to 250kbps. It eliminates the need for a separate negative RS-232 supply because the charge-pump circuitry generates the required bipolar signal levels from one 3.0V-to-5.5V source. Automatic shutdown can reduce consumption between scans, and the protected interface helps withstand ESD encountered on frequently handled equipment. The PCB should keep the charge-pump capacitors and protection components close to the relevant pins, following the manufacturer layout drawing.
추천
Test and Measurement Equipment
The MAX3221EEAE+TG1Z can provide a compact command port for test and measurement equipment that communicates with a PC or service controller. The 250kbps capability supports instrument-control traffic while the 1uA shutdown specification helps manage power in portable or intermittently operated instruments. Its single-channel arrangement is appropriate where only one service connector is needed. For bench equipment, preserve the recommended ground and charge-pump layout, and verify the RS-232 logic levels and cable termination expected by the connected controller.
추천
Embedded Data Acquisition Unit
The MAX3221EEAE+TG1Z is a practical choice for a compact data-acquisition unit with one configuration or telemetry port. Operating from 3.3V or 5V, it can sit close to a microcontroller or processor while presenting a standard RS-232 connector to field equipment. The 250kbps maximum rate supports moderate command traffic, and automatic wake-up helps avoid leaving the interface continuously active. The designer should assess whether the one-driver, one-receiver arrangement meets the data-acquisition system’s full-duplex and channel-count requirements.
추천
Programmable Logic Controller Communication
The MAX3221EEAE+TG1Z can provide a service or expansion port for a programmable logic controller that uses a single RS-232 channel. Its single-supply operation simplifies interface design around 3.3V and 5V controller platforms, while the enhanced ESD protection is helpful in electrically noisy industrial installations. The automatic shutdown and wake-up features assist power management when the PLC is idle. Confirm the PLC’s RS-232 electrical specification, logic polarity, handshake requirements, and shield connection before finalizing the interface.
추천
추천 제품 요약
엔지니어링 참조 데이터: MAX3221EEAE+TG1Z — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MAX3221EAE+T | MAX3221EEUE | MAX3250EAI+T | MAX3232ECAE+T |
|---|---|---|---|---|---|
| Product Type | Single-supply RS-232 transceiver | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver |
| Package | 16-pin SSOP | 16-pin SSOP | 16-pin SSOP | 16-pin SSOP | 16-pin SSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
주요 차별점
- Single-driver, single-receiver RS-232 interface (vs MAX3223)
- Enhanced ESD protection (vs MAX3221EAE+T)
- Automatic power management (vs MAX3221EAE+T)
설계 노트
Place the MAX3221 charge-pump capacitors directly across the capacitor pins identified in the manufacturer application circuit, and keep the traces short. The 16-pin SSOP footprint should follow the official package drawing, including pin-1 orientation and pad geometry. Keep the RS-232 connector, protection components, and transceiver on the same ground reference, while separating the external cable-side routing from sensitive logic traces.
Use the MAX3221EEAE+TG1Z data-rate limit of 250kbps as the upper device capability, not as a guarantee for every cable and baud rate. Long or unshielded RS-232 cables increase capacitance and susceptibility to noise, so validate the intended baud rate, cable length, termination strategy, and logic-level tolerances in the complete system. Place any required connector protection close to the cable entry.
The 3.0V-to-5.5V supply range allows either 3.3V or 5V operation, but the host UART signal levels must also match the MAX3221 logic-side inputs and outputs. Bypass the supply pins with the capacitance and placement specified in the manufacturer datasheet. When automatic shutdown is used, ensure the enable or shutdown-control logic cannot leave the transceiver in an unintended state during reset or cable insertion.
규정 준수 정보
Compliance claims are not stated in the available product snippets. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status from the current manufacturer product documentation before production release.